Cloning,expression and characterization of a lipase gene (<Emphasis Type="Italic">lip3</Emphasis>) from<Emphasis Type="Italic"> Pseudomonas aeruginosa</Emphasis> LST-03

A lipase gene (lip3) was cloned from the Pseudomonas aeruginosa strain LST-03 (which tolerates organic solvents) and expressed in Escherichia coli. The cloned sequence includes an ORF consisting of 945 nucleotides, encoding a protein of 315 amino acids (Lip3 lipase, 34.8 kDa). The predicted Lip3 lipase belongs to the class of serine hydrolases; the catalytic triad consists of the residues Ser-137, Asp-258, and His-286. The gene cloned in the present study does not encode the LST-03 lipase, a previously isolated solvent-stable lipase secreted by P. aeruginosa LST-03, because the N-terminal amino acid sequence of the Lip3 lipase differs from that of the LST-03 lipase. Although the effects of pH on the activity and stability of the Lip3 lipase, and the temperature optimum of the enzyme, were similar to those of the LST-03 lipase, the relative activity of the Lip3 lipase at lower temperatures (0–35°C) was higher than that of the LST-03 lipase. In the absence of organic solvents, the half-life of the Lip3 lipase was similar to that of the LST-03 lipase. However, in the presence of most of the organic solvents tested in this study (the exceptions were ethylene glycol and glycerol), the stability of the Lip3 lipase was lower than that of the LST-03 lipase.Communicated by H. Ikeda     

Purification, biochemical and molecular characterization of a metalloprotease from Pseudomonas aeruginosa MN7 grown on shrimp wastes

A protease-producing bacterium was isolated and identified as Pseudomonas aeruginosa MN7. The strain was found to produce proteases when it was grown in media containing only shrimp waste powder (SWP), indicating that it can obtain its carbon, nitrogen, and salts requirements directly from shrimp waste. The use of 60 g/l SWP resulted in a high protease production. Elastase, the major protease produced by P. aeruginosa MN7, was purified from the culture supernatant to homogeneity using acetone precipitation, Sephadex G-75 gel filtration, and ultrafiltration using a 10-kDa cut-off membrane, with a 5.2-fold increase in specific activity and 38.4% recovery. The molecular weight of the purified elastase was estimated to be 34 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration. The optimum temperature and pH for protease activity were 60 degrees C and 8.0, respectively. The activity of the enzyme was totally lost in the presence of ethylene glycol tetraacetic acid, suggesting that the purified enzyme is a metalloprotease. The purified enzyme was highly stable in the presence of organic solvents, retaining 100% of its initial activity after 60 days of incubation at 30 degrees C in the presence of dimethyl sulfoxide and methanol. The lasB gene, encoding the MN7 elastase, was isolated and its DNA sequence was determined.     

产碱假单胞菌脂肪酶的克隆表达及酶学性质研究

【目的】克隆产碱假单胞菌的脂肪酶基因,实现其在大肠杆菌中异源表达并进行酶学性质研究。【方法】通过基因文库构建和PCR,获得脂肪酶基因,并以pET30a(+)为表达载体、E.coli BL21(DE3)为宿主菌,在大肠杆菌中进行异源表达,表达产物经HisTrapTM亲和层析柱纯化后进行酶学性质研究。【结果】从产碱假单胞菌中克隆得到一个脂肪酶基因,大小为1 575 bp(GenBank登录号为JN674069)。该酶分子量为55 kD,最适底物为p-NPO,最适反应温度和pH分别为35°C、pH 9.0。重组酶经1 mmol/L的Cu2+处理30 min可使酶活提高至156%。在最适反应条件下重组酶的比活力为275 U/mg,Km和Vmax分别为80μmol/L和290 mmol/(min.g protein)。【结论】产碱假单胞菌脂肪酶基因的克隆与表达不仅积累了脂肪酶基因的资源,并为其在手性拆分中的应用奠定基础。     

Amino acid residues involved in organic solvent-stability of the LST-03 lipase

LST-03 lipase from Pseudomonas aeruginosa LST-03 is highly active and stable in the presence of various organic solvents. To further characterize and improve the organic solvent-stability of the LST-03 lipase, residues that potentially provide this stability were identified and mutated to other amino acids in an effort to increase the organic solvent-stability of the protein. S155L, G157R, S164K, S194R, and D209N mutations were found to improve the organic solvent-stability of the wild-type LST-03 lipase. Such mutations were found to induce structural changes, including the formation of a salt bridge, hydrogen bonds, lead to an improved packing of the hydrophobic core, and pI shift of side chain. These changes increased the stability of the protein, thereby improving the organic solvent-stability of the wild-type LST-03 lipase. In addition, a single mutation was found to stabilize the lipase by single or multiple factors.     

Production of lipase and protease from an indigenous Pseudomonas aeruginosa strain and their evaluation as detergent additives: compatibility study with detergent ingredients and washing performance

An indigenous Pseudomonas aeruginosa strain has been studied for lipase and protease activities for their potential application in detergents. Produced enzymes were investigated in order to assess their compatibility with several surfactants, oxidizing agents and commercial detergents. The crude lipase appeared to retain high activity and stability in the presence of several surfactants and oxidizing agents and it was insusceptible to proteolysis. Lutensol? XP80 and Triton? X-100 strongly activated the lipase for a long period (up to 40 and 30% against the control after 1h) while the protease activity was enhanced by the addition of Triton? WR1339 and Tween? 80. The washing performance of the investigated surfactants was significantly improved with the addition of the crude enzyme preparation. Studies were further undertaken to improve enzymes production. The optimization of fermentation conditions led to an 8-fold increase of lipase production, while the production of protease was enhanced by 60%.     

An organic solvent-stable alkaline protease from Pseudomonas aeruginosa strain K: Enzyme purification and characterization

The organic solvent-tolerant strain K protease was purified to homogeneity by ammonium sulphate precipitation and anion exchange chromatography with 124-fold increase in specific activity. The molecular mass of the purified enzyme as revealed by SDS-PAGE electrophoresis is 51,000 Da. The strain K protease was an alkaline metalloprotease with an optimum pH and temperature of 10 and 70 °C, respectively. The enzyme showed stability and activation in the presence of organic solvents with log P_a/w values equal or more than 4.0. After 14 days of incubation, the purified protease was activated 1.11, 1.82, 1.50, 1.75 and 1.80 times in 1-decanol, isooctane, decane, dodecane and hexadecane, respectively.     

Cloning, expression, and characterization of a lipolytic enzyme gene (lip8) from Pseudomonas aeruginosa LST-03

A lipolytic enzyme gene (lip8) was cloned from organic solvent-tolerant Pseudomonas aeruginosa LST-03 and sequenced. In the sequenced nucleotides, an open reading frame consisting of 1,173 nucleotides and encoding 391 amino acids was found. Lip8 is considered to belong to the family VIII of lipolytic enzymes whose serine in the consensus sequence of -Ser-Xaa-Xaa-Lys- acts as catalytic nucleophile. The gene was expressed in Escherichia coli and purified by a combination of ammonium sulfate fractionation and hydrophobic interaction and ion-exchange chromatographies to homogeneity on SDS-PAGE analysis. The optimum temperature and heat stability of Lip8 were not as high as those of Lip3 and LST-03 lipase, two other lipolytic enzymes from the same strain. Addition of glycerol to a solution containing Lip8 stabilized this enzyme. By measuring the activities against various triacylglycerols and fatty acid methyl esters having carbon chains of different lengths, Lip8 was categorized as an esterase which has higher activities against fatty acid methyl esters with short-chain fatty acids.     

Affinity-based isolation of a bacterial lipase through steric chaperone interactions

Lipases are important as additives in detergent formulations but their biocatalytic potential is increasingly exploited in the synthesis of high-added value chemicals, in fine-chemical production and in the pharmaceutical industry. Traditionally, conventional purification schemes comprise several chromatographic steps. Here we report a new purification procedure of the lipase (LipA) that is endogenously secreted by the Gram-negative bacterium Burkholderia glumae. This affinity purification combines the specific binding scaffold of a lipase-specific foldase (Lif) and the intrinsic resistance to chemical denaturation of LipA. The newly devised method is less labor-intensive, is fast, leads to a homogeneous preparation and can be easily scaled up. The novel and the conventional purification strategies were evaluated in parallel and characteristics of the B. glumae lipase were analyzed via CD spectroscopy. Lipopolysaccharide (LPS) was still present in the samples purified via the conventional purification scheme and was shown to increase the thermostability of the lipase.     

Pentachlorophenol degradation by Pseudomonas aeruginosa

Five Pseudomonas species were tested for ability to degrade pentachlorophenol (PCP). Pseudomonas aeruginosa completely degraded PCP up to 800 mg/l in 6 days with glucose as co-substrate. With 1000 mg PCP/l, 53% was degraded. NH₄ ⁺ salts were better at enhancing degradation than organic nitrogen sources and shake-cultures promoted PCP degradation compared with surface cultures. Degradation was maximal at pH 7.6 to 8.0 and at 30 to 37°C. Only PCP induced enzymes that degraded PCP and chloramphenicol inhibited this process. The PCP was degraded to CO₂, with release of Cl^-.The authors are with the Bacteriology Laboratory, Central Leather Research Institute, Madras-600 020, India.     

Molecular cloning and expression of perhydrolase genes from Pseudomonas aeruginosa and Burkholderia cepacia in Escherichia coli

Two bacterial perhydrolase genes, perPA and perBC, were cloned from Pseudomonas aeruginosa and Burkholderia cepacia, respectively, using PCR amplification with primers designed to be specific for conserved amino acid sequences of the already-known perhydrolases. The amino acid sequence of PerPA was identical to a putative perhydrolase of P. aeruginosa PAO1 genome sequences, whereas PerBC of B. cepacia was a novel bacterial perhydrolase showing similarity of less than 80% with all other existing perhydrolases. Most importantly, the perPA gene was expressed as a soluble intracellular form to an extent of more than 50% of the total protein content in Escherichia coli. Two perhydrolase enzymes were confirmed to exhibit the halogenation activity towards Phenol Red and monochlorodimedone. These results suggested that we successfully obtained the newly identified members of the bacterial perhydrolase family, expanding the pool of available perhydrolases.     

Staphylolytic enzyme from Pseudomonas aeruginosa: characterization and immunocytochemical localization

Staphylolytic enzyme, a specific peptidase produced by Pseudomonas aeruginosa, has been characterized by using immunochemical procedures. Lytic activity was detected in the extracellular medium of Pseudomonas cultures at the beginning of the stationary growth phase. No activity was detected in bacterial cells. However, lytic protein antigen was present in periplasmic and cytoplasmic fractions, suggesting that staphylolytic enzyme is synthesized as an inactive precursor which becomes active during translocation to the extracellular broth. Results obtained in immunolocalization experiments indicate the presence of the precursor in the outer part of cells. The export pathway of staphylolytic enzyme through the periplasmic space is proposed.Abbreviations DCE dialyzed crude extract - CFU colonies forming units - LU lytic unit     

Nucleotide sequence analysis and comparison of the lexA genes from Salmonella typhimurium, Erwinia carotovora, Pseudomonas aeruginosa and Pseudomonas putida.

Summary The complete nucleotide sequences of the lexA genes from Salmonella typhimurium, Erwinia carotovora, Pseudomonas aeruginosa and Pseudomonas putida were determined; the DNA sequences of the lexA genes from these bacteria were 86%, 76%, 61% and 59% similar, respectively, to the Escherichia coli K12 gene. The predicted amino acid sequences of the S. typhimurium, E. carotovora and P. putida LexA proteins are 202 residues long whereas that of P. aeruginosa is 204. Two putative LexA repressor binding sites were localized upstream of each of the heterologous genes, the distance between them being 5 by in S. typhimurium and E. carotovora, as in the lexA gene of E. coli, and 3 by in P. putida and P. aeruginosa. The first lexA site present in the lexA operator of all five bacteria is very well conserved. However, the second lexA box is considerably more variable. The Ala-84 — Gly-85 bond, at which the LexA repressor of E. coli is cleaved during the induction of the SOS response, is also found in the LexA proteins of S. typhimurium and E. carotovora. Likewise, the amino acids Ser-119 and Lys-156 are present in all of these three LexA repressors. These residues also exist in the LexA proteins of P. putida and P. aeruginosa, but they are displaced by 4 and 6 residues, respectively. Furthermore, the structure and sequence of the DNA-binding domain of the LexA repressor of E. coli are highly conserved in the S. typhimurium, E. carotovora, P. aeruginosa and P. putida LexA proteins.     

The stereoisomers of pyochelin, a siderophore of Pseudomonas aeruginosa

The Pseudomonas aeruginosa siderophore pyochelin is obtained from the bacterial culture medium as a mixture of two epimers. Chromatically isolated pure stereoisomers equilibrate readily in most solvents. Experiments will be reported which allow to isolate one of the isomers in pure form and which shed some additional light on the epimerization reaction.     

Detection of Pseudomonas aeruginosa carried a new array of gene cassettes within class 1 integron isolated from a teaching hospital in Nanjing, China

We report here novel array of gene cassettes found in single variable region of class 1 integron disseminated in Pseudomonas aeruginosa isolated from a teaching hospital in Nanjing, Jiangsu Province, China. 29 of 47 (61%) P. aeruginosa strains were confirmed haboured class 1 integron, and all the positive strains have the same variable region confirmed by PCR and RFLP methods. The variable region contained an unreported order of four gene cassettes aac(6′)-II-aadA13-cmlA8-oxa-10. Of those, cmlA8 gene was a variant of cmlA5 encoding non-enzymatic protein which putatively confer resistance to chloramphenicol. Susceptibility testing revealed multidrug-resistant mechanisms were involved in the class 1 integron positive clinical isolates. And the class 1 integron located on an about 15 kb transferable plasmid was certified by conjugation experiment and plasmid DNA analysis. The macro restriction profile indicated those clinical strains were clonally related. These authors contributed equally to this work.     

Cloning,expression, purification,and characterization of recombinant flagellin isolated from <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis>

Pseudomonas aeruginosa as an opportunistic pathogen causes lethal infections in immunocompromised individuals. This bacterium possesses a polar flagellum made up of flagellin subunits. Flagella have important roles in motility, chemotaxis, and establishment of P. aeruginosa in acute phase of infections. Isolation, cloning, and expression of flagellin were aimed at in this study. Flagellin gene (fliC) of P. aeruginosa strain 8821M was isolated by PCR and cloned into a pET expression vector. The recombinant flagellin (46 kDa) was overexpressed as inclusion bodies (IBs). IBs were solubilized in guanidine hydrochloride (GuHCl) followed by affinity-purification and renatured using Ni²⁺-Sepharose resin. Recombinant flagellins reacted with the serum from a rabbit previously immunized with native flagellin. In addition, polyclonal antiserum raised against the recombinant flagellin was shown to significantly inhibit the cell motility of P. aeruginosa strain 8821M in vitro.     

Cloning and expression of a novel lipase gene from Pseudomonas fluorescens B52

Here we describe an advanced polymerase chain reaction (PCR) technique, the compatible ends ligation inverse PCR (CELI-PCR) for chromosome walking. In CELI-PCR, several restriction enzymes, which produce compatible cohesive ends, were used to digest target DNA simultaneously or sequentially to produce DNA fragments of suitable size. DNA fragments were then easily circularized and PCR amplification could be carried out efficiently. The previous limitations of inverse PCR were overcome, such as unavailable restriction sites, poor template DNA circularization, and low amplification efficiency. Therefore, successive chromosome walking was performed successfully. Our work, isolating a 11,395-bp fragment from Gossypium hirsutum, was presented as an example to describe how CELI-PCR was carried out.