Structure of Semliki Forest virus core protein

Alphaviruses are enveloped, insect-borne viruses, which contain a positive-sense RNA genome. The protein capsid is surrounded by a lipid membrane, which is penetrated by glycoprotein spikes. The structure of the Sindbis virus (SINV) (the type virus) core protein (SCP) was previously determined and found to have a chymotrypsin-like structure. SCP is a serine proteinase which cleaves itself from a polyprotein. Semliki Forest virus (SFV) is among the most distantly related alphaviruses to SINV. Similar to SCP, autocatalysis is inhibited in SFCP after cleavage of the polyprotein by leaving the carboxy-terminal tryptophan in the specificity pocket. The structures of two different crystal forms (I and II) of SFV core protein (SFCP) have been determined to 3.0 Å and 3.3 Å resolution, respectively. The SFCP monomer backbone structure is very similar to that of SCP. The dimeric association between monomers, A and B, found in two different crystal forms of SCP is also present in both crystal forms of SFCP. However, a third monomer, C, occurs in SFCP crystal form I. While monomers A and B make a tail-to-tail dimer contact, monomers B and C make a head-to-head dimer contact. A hydrophobic pocket on the surface of the capsid protein, the proposed site of binding of the E2 glycoprotein, has large conformational differences with respect to SCP and, in contrast to SCP, is found devoid of bound peptide. In particular, Tyr184 is pointing out of the hydrophobic pocket in SFCP, whereas the equivalent tyrosine in SCP is pointing into the pocket. The conformation of Tyr184, found in SFCP, is consistent with its availability for iodination, as observed in the homologous SINV cores. This suggests, by comparison with SCP, that E2 binding to cores causes major conformational changes, including the burial of Tyr184, which would stabilize the intact virus on budding from an infected cell. The head-to-tail contacts found in the pentameric and hexameric associations within the virion utilize the same monomer surface regions as found in the crystalline dimer interfaces. Proteins 27:345–359, 1997. © 1997 Wiley-Liss, Inc.     

The effect of mutation at valine-45 on the stability and redox potentials of trypsin-cleaved cytochrome b5

In an attempt to elucidate the determinants of redox potential and protein stability in cytochrome b5, three mutants at a highly conserved residue Val45, which is a member of heme hydrophobic pocket residues have been characterized. The V45Y mutant was designed to introduce a bulkier residue and a hydroxyl group to the heme pocket. The mutants V45H and V45E were constructed to test the effect of positive and negative charge on the stability and redox potential of proteins. The influence of these mutants on the protein stability towards thermal, urea, acid, ethanol and on the redox potential were studied. It is concluded that the decrease of hydrophobic free energy and the larger volume of the tyrosine make the phenylhydroxyl group of tyrosine still sitting inside the hydrophobic pocket, while the side chain of the mutant V45E and V45H shift away from the heme pocket. The redox potentials of mutants V45Y, V45H, V45E and wild-type of cytochrome b5 are -35 mV, 8 mV, -26 mV and -3 mV, respectively. The bigger change of the V45Y on redox potential is due to the close contact between the hydroxyl group and the heme, while the changes of the V45E and V45H result from the alteration of charge density and distribution around the heme. Different relative stability of these mutants towards heat have been observed with the order: WT > V45Y-V45H > V45E being both in the oxidized and reduced state. The relative stability induced by addition of urea decreases in the order: WT > V45Y > V45H > V45E. These results suggest that the difference in the hydrophobic free energy is a major factor contributing to the stability of the Val45 mutants. Also the loose of the helix III in the mutant V45E makes it more unstable. These results indicate that residue Val45 plays an important role in the stability and redox potential of the protein.     

Biophysical and enzymatic properties of aminoglycoside adenylyltransferase AadA6 from Pseudomonas aeruginosa

The gene coding for the aminoglycoside adenylyltransferase (aadA6) from a clinical isolate of Pseudomonas aeruginosa was cloned and expressed in Escherichia coli strain BL21(DE3)pLysS. The overexpressed enzyme (AadA6, 281 amino-acid residues) and a carboxy-terminal truncated variant molecule ([1-264]AadA6) were purified to near homogeneity and characterized. Light scattering experiments conducted under low ionic strength supported equilibrium between monomeric and homodimeric arrangements of the enzyme subunits. Circular Dichroism spectropolarimetry indicated a close structural relation to adenylate kinases. Both forms modified covalently the aminoglycosides streptomycin and spectinomycin. The enzyme required at least 5 mM MgCl₂ for normal Michaelis–Menten kinetics. Streptomycin exhibited a strong substrate inhibition effect at 1 mM MgCl₂. The truncated 17 residues at the C-terminus have little influence on protein folding, whereas they have a positive effect on the enzymic activity and stabilize dimers at high protein concentrations (>100 μM). Homology modelling and docking based on known crystal structures yielded models of the central ternary complex of monomeric AadA6 with ATP and streptomycin or spectinomycin.     

Three-dimensional structure and function study on the active region in the extracellular ligand-binding domain of human IL-6 receptor

In this study the three-dimensional (3-D) model of the ligand-binding domain (V106-P322) of human interleukin-6 receptor (hIL-6 R) was constructed by computer-guided homology modeling technique using the crystal structure of the ligand-binding domain (K52-L251) of human growth hormone receptor (hGHR) as templet. Furthermore, the active binding region of the 3-D model of hIL-6R with the ligand (hIL-6) was predicted. In light of the structural characteristics of the active region, a hydrophobic pocket shielded by two hydrophilic residues (E115 and E505) of the region was identified by a combination of molecular modelling and the site-directed or double-site mutation of the twelve crucial residues in the ligand-binding domain of hIL-6R (V106-P322). We observed and analyzed the effects of these mutants on the spatial conformation of the pocket-like region of hIL-6 R. The results indicated that any site-directed mutation of the five Cys residues (four conservative Cys residues: Cys121, Cys132, Cys165, Cys176; near membrane Cys residue: Cys193) or each double-site mutation of the five residues in WSEWS motif of hIL-6R (V106-P322) makes the corresponding spatial conformation of the pocket region block the linkage between hIL-6 R and hIL-6. However, the influence of the site-directed mutation of Cys211 and Cys277 individually on the conformation of the pocket region benefits the interaction between hIL-6R and hIL-6. Our study suggests that the predicted hydrophobic pocket in the 3-D model of hIL-6R (V106-P322) is the critical molecular basis for the binding of hIL-6R with its ligand, and the active pocket may be used as a target for designing small hIL-6R-inhibiting molecules in our further study.     

Three-dimensional structure and function study on the active region in the extracellular ligand-binding domain of human IL-6 receptor

In this study the three-dimensional (3-D) model of the ligand-binding domain (V106-P322) of human interleukin-6 receptor (hlL-6 R) was constructed by computer-guided ho-mology modeling technique using the crystal structure of the ligand-binding domain (K52-L251) of human growth hormone receptor (hGHR) as templet. Furthermore, the active binding region of the 3-D model of hlL-6R with the ligand (hlL-6) was predicted. In light of the structural characteristics of the active region, a hydrophobic pocket shielded by two hydrophilic residues (E115 and E505) of the region was identified by a combination of molecular modelling and the site-directed or double-site mutation of the twelve crucial residues in the ligand-binding domain of hIL-6R (V106-P322). We observed and analyzed the effects of these mutants on the spatial conformation of the pocket-like region of hlL-6 R. The results indicated that any site-directed mutation of the five Cys residues (four conservative Cys residues: Cyst 21, Cys132, Cys165, Cys1     

Crystal Structure of Aura Virus Capsid Protease and Its Complex with Dioxane: New Insights into Capsid-Glycoprotein Molecular Contacts

The nucleocapsid core interaction with endodomains of glycoproteins plays a critical role in the alphavirus life cycle that is essential to virus budding. Recent cryo-electron microscopy (cryo-EM) studies provide structural insights into key interactions between capsid protein (CP) and trans-membrane glycoproteins E1 and E2. CP possesses a chymotrypsin-like fold with a hydrophobic pocket at the surface responsible for interaction with glycoproteins. In the present study, crystal structures of the protease domain of CP from Aura virus and its complex with dioxane were determined at 1.81 and 1.98 Å resolution respectively. Due to the absence of crystal structures, homology models of E1 and E2 from Aura virus were generated. The crystal structure of CP and structural models of E1 and E2 were fitted into the cryo-EM density map of Venezuelan equine encephalitis virus (VEEV) for detailed analysis of CP-glycoprotein interactions. Structural analysis revealed that the E2 endodomain consists of a helix-loop-helix motif where the loop region fits into the hydrophobic pocket of CP. Our studies suggest that Cys397, Cys418 and Tyr401 residues of E2 are involved in stabilizing the structure of E2 endodomain. Density map fitting analysis revealed that Pro405, a conserved E2 residue is present in the loop region of the E2 endodomain helix-loop-helix structure and makes intermolecular hydrophobic contacts with the capsid. In the Aura virus capsid protease (AVCP)-dioxane complex structure, dioxane occupies the hydrophobic pocket on CP and structurally mimics the hydrophobic pyrollidine ring of Pro405 in the loop region of E2.     

Crystal structure of the Psb28 accessory factor of Thermosynechococcus elongatus photosystem II at 2.3 Å

Members of the Psb28 family of proteins are accessory factors implicated in the assembly and repair of the photosystem II complex. We present here the crystal structure of the Psb28 protein (Tlr0493) found in the thermophilic cyanobacterium Thermosynechococcus elongatus at a resolution of 2.3 Å. Overall the crystal structure of the Psb28 monomer is similar to the solution structures of C-terminally His-tagged Psb28-1 from Synechocystis sp. PCC 6803 obtained previously by nuclear magnetic resonance spectroscopy. One new aspect is that Escherichia coli-expressed T. elongatus Psb28 is able to form dimers in solution and packs as a dimer of dimers in the crystal. Analysis of wild type and mutant strains of Synechocystis 6803 by blue native-polyacrylamide gel electrophoresis suggests that Psb28-1, the closest homologue to T. elongatus Psb28 in this organism, also exists as an oligomer in vivo, most likely a dimer. In line with the prediction based on the crystal structure of T. elongatus Psb28, the addition of a 3× Flag-tag to the C-terminus of Synechocystis 6803 Psb28-1 interferes with the accumulation of the Psb28-1 oligomer in vivo. In contrast, the more distantly related Psb28-2 protein found in Synechocystis 6803 lacks the residues that stabilize dimer formation in the T. elongatus Psb28 crystal and is detected as a monomer in vivo. Overall our data suggest that the dimer interface in the Psb28 crystal might be physiologically relevant.     

Structural analysis of the essential resuscitation promoting factor YeaZ suggests a mechanism of nucleotide regulation through dimer reorganization

Background

The yeaZ gene product forms part of the conserved network YjeE/YeaZ/YgjD essential for the survival of many Gram-negative eubacteria. Among other as yet unidentified roles, YeaZ functions as a resuscitation promoting factor required for survival and resuscitation of cells in a viable but non-culturable (VBNC) state.

Methodology/Principal Findings

In order to investigate in detail the structure/function relationship of this family of proteins we have performed X-ray crystallographic studies of Vibrio parahaemolyticus YeaZ. The YeaZ structure showed that it has a classic actin-like nucleotide-binding fold. Comparisons of this crystal structure to that of available homologues from E. coli, T. maritima and S. typhimurium revealed two distinctly different modes of dimer formation. In one form, prevalent in the absence of nucleotide, the putative nucleotide-binding site is incomplete, lacking a binding pocket for a nucleotide base. In the second form, residues from the second subunit complete the nucleotide-binding site. This suggests that the two dimer architectures observed in the crystal structures correspond to a free and a nucleotide-bound form of YeaZ. A multiple sequence alignment of YeaZ proteins from different bacteria allowed us to identify a large conserved hydrophobic patch on the protein surface that becomes exposed upon nucleotide-driven dimer re-arrangement. We hypothesize that the transition between two dimer architectures represents the transition between the ‘on’ and ‘off’ states of YeaZ. The effect of this transition is to alternately expose and bury a docking site for the partner protein YgjD.

Conclusions/Significance

This paper provides the first structural insight into the putative mechanism of nucleotide regulation of YeaZ through dimer reorganization. Our analysis suggests that nucleotide binding to YeaZ may act as a regulator or switch that changes YeaZ shape, allowing it to switch partners between YjeE and YgjD.     

Site-Directed Mutagenesis Identifies the Positively Charged Residue Lysine-46 Essential for the Function of the Immunity Protein PedB

The immunity proteins of pediocin-like bacteriocins possess a positively charged region which is located at the C-terminus in all three subclasses. It has been suggested that this region may be involved in directing the immunity protein to the surface of the bacterial cell membrane. The aim of this study was to determine whether the positively charged residue lysine-46 (K46) around the hydrophobic pocket played a key role for immunity activity of subgroup A immunity protein PedB. At first, heterologous expression of the immune gene pedB from Lactobacillus plantarum BM-1 rendered the sensitive Lactobacillus plantarum WQ0815 resistant to bacteriocin BM-1. Then, using site-directed mutagenesis, the residue K46 was replaced by five different amino-acid residues, including arginine (R), aspartate (D), glutamate (E), glutamine (Q), and threonine (T). Western blot analysis confirmed that all mutated pedB genes were successfully expressed in the host L. plantarum WQ0815. Bacteriocin activity assays subsequently showed that any substitution of the K46 residue significantly reduced its immunity activity. Our present results indicated that the positively charged residue K46 located near the hydrophobic pocket was essential for the functionality of the immunity protein PedB.     

Domain Structure of the ATP-Binding-Cassette Protein MalK of Salmonella typhimurium as Assessed by Coexpressed Half Molecules and LacK′-′MalK Chimeras

ATP-binding-cassette (ABC) subunit MalK of the binding protein-dependent transport system for maltose of Salmonella typhimurium and Escherichia coli is crucial to the transport process but also exhibits a repressing activity on other genes of the maltose regulon. The latter function has been attributed to a carboxy-terminal extension by which MalK differs in length from a prototype ABC protein. In order to define the boundaries of putative functional domains of MalK, we have analyzed pairs of N- and C-terminally truncated MalK proteins of S. typhimurium. Coexpressed half molecules of about equal lengths (MalKN1: residues 1 to 179; MalKC1: residues 179 to 369) restored the transport activity of a malK strain and displayed substantial regulatory activity. The same regulatory activity was obtained when malKC1 was expressed separately. These results indicate that a covalent linkage is not absolutely essential for function and that the protein might be composed of two structurally distinct entities. To elucidate further the minimal structural requirements for the regulatory function of MalK, we have studied chimeric proteins that have C-terminal portions of MalK fused to the corresponding amino-terminal fragments of its close homolog LacK. Functional analyses revealed that a fusion containing only the C-terminal extension of MalK (Q263 to V369) is sufficient to display half-maximal regulatory activity. This activity increased with the lengths of the MalK portions present in the chimeras. Furthermore, the failure of two chimeras to support maltose transport suggests a structurally critical region between residues 243 and 264. In the absence of a crystal structure, this work contributes to the understanding of the multiple functions of MalK.     

Dimerization of Bacterial Diaminopimelate Epimerase Is Essential for Catalysis

Diaminopimelate (DAP) epimerase is involved in the biosynthesis of meso-DAP and lysine, which are important precursors for the synthesis of peptidoglycan, housekeeping proteins, and virulence factors in bacteria. Accordingly, DAP epimerase is a promising antimicrobial target. Previous studies report that DAP epimerase exists as a monomeric enzyme. However, we show using analytical ultracentrifugation, X-ray crystallography, and enzyme kinetic analyses that DAP epimerase from Escherichia coli exists as a functional dimer in solution and the crystal state. Furthermore, the 2.0-Å X-ray crystal structure of the E. coli DAP epimerase dimer shows for the first time that the enzyme exists in an open, active conformation. The importance of dimerization was subsequently probed by using site-directed mutagenesis to generate a monomeric mutant (Y268A). Our studies show that Y268A is catalytically inactive, thus demonstrating that dimerization of DAP epimerase is essential for catalysis. Molecular dynamics simulations indicate that the DAP epimerase monomer is inherently more flexible than the dimer, suggesting that dimerization optimizes protein dynamics to support function. Our findings offer insight into the development of novel antimicrobial agents targeting the dimeric antibiotic target DAP epimerase.     

Photo-oxidation of tyrosine in a bio-engineered bacterioferritin ‘reaction centre’—A protein model for artificial photosynthesis

The photosynthetic reaction centre (RC) is central to the conversion of solar energy into chemical energy and is a model for bio-mimetic engineering approaches to this end. We describe bio-engineering of a Photosystem II (PSII) RC inspired peptide model, building on our earlier studies. A non-photosynthetic haem containing bacterioferritin (BFR) from Escherichia coli that expresses as a homodimer was used as a protein scaffold, incorporating redox-active cofactors mimicking those of PSII. Desirable properties include: a di-nuclear metal binding site which provides ligands for bivalent metals, a hydrophobic pocket at the dimer interface which can bind a photosensitive porphyrin and presence of tyrosine residues proximal to the bound cofactors, which can be utilised as efficient electron-tunnelling intermediates.     

Controlling tetramer formation,subunit rotation and DNA ligation during Hin-catalyzed DNA inversion

Two critical steps controlling serine recombinase activity are the remodeling of dimers into the chemically active synaptic tetramer and the regulation of subunit rotation during DNA exchange. We identify a set of hydrophobic residues within the oligomerization helix that controls these steps by the Hin DNA invertase. Phe105 and Met109 insert into hydrophobic pockets within the catalytic domain of the same subunit to stabilize the inactive dimer conformation. These rotate out of the catalytic domain in the dimer and into the subunit rotation interface of the tetramer. About half of residue 105 and 109 substitutions gain the ability to generate stable synaptic tetramers and/or promote DNA chemistry without activation by the Fis/enhancer element. Phe106 replaces Phe105 in the catalytic domain pocket to stabilize the tetramer conformation. Significantly, many of the residue 105 and 109 substitutions support subunit rotation but impair ligation, implying a defect in rotational pausing at the tetrameric conformer poised for ligation. We propose that a ratchet-like surface involving Phe105, Met109 and Leu112 within the rotation interface functions to gate the subunit rotation reaction. Hydrophobic residues are present in analogous positions in other serine recombinases and likely perform similar functions.     

Probing the Putative Active Site of YjdL: An Unusual Proton-Coupled Oligopeptide Transporter from E. coli

YjdL from E. coli is an unusual proton-coupled oligopeptide transporter (POT). Unlike prototypical POTs, dipeptides are preferred over tripeptides, in particular dipeptides with a positively charged C-terminal residue. To further understand this difference in peptide specificity, the sequences of YjdL and YdgR, a prototypical E. coli POT, were compared in light of the crystal structure of a POT from Shewanella oneidensis. Several residues found in the putative active site were mutated and the activities of the mutated variants were assessed in terms of substrate uptake assays, and changes in specificity in terms of uptake inhibition. Most strikingly, changing the YjdL specific Asp392 to the conserved Ser in YjdL obliterated the preference for a positively charged C-terminal residue. Based on this unique finding and previously published results indicating that the dipeptide N-terminus may interact with Glu388, a preliminary orientation model of a dipeptide in the YjdL cavity is presented. Single site mutations of particularly Ala281 and Trp278 support the presented orientation. A dipeptide bound in the cavity of YjdL appears to be oriented such that the N-terminal side chain protrudes into a sub pocket that opens towards the extracellular space. The C-terminal side chain faces in the opposite direction into a sub pocket that faces the cytoplasm. These data indicated a stabilizing effect on a bulky N-terminal residue by an Ala281Phe variant and on the dipeptide backbone by Trp278. In the presented orientation model, Tyr25 and Tyr58 both appear to be in proximity of the dipeptide backbone while Lys117 appears to be in proximity of the peptide C-terminus. Mutational studies of these conserved residues highlight their functional importance.     

Structure and function of the abasic site specificity pocket of an AP endonuclease from Archaeoglobus fulgidus

The major AP endonuclease in Escherichia coli Exonuclease III (ExoIII) is frequently used in gene technology due to its strong exonucleolytic activity. A thermostabilized variant of ExoIII or a homologous enzyme from thermophilic organisms could be most useful for further applications. For this purpose we characterized a nuclease from the hyperthermophilic archaeon Archaeoglobus fulgidus (Af_Exo), which shares 33% overall sequence identity and 55% similarity to ExoIII. The gene coding for this thermostable enzyme was cloned and expressed in E. coli. The purified protein shows a strong Mg²⁺-dependent nicking activity at AP-sites, nicking of undamaged double-stranded (ds) DNA and a weak exonucleolytic activity. A V217G variant of the enzyme was crystallized with decamer ds-DNA molecule, and the three-dimensional structure was determined to 1.7 Å resolution. Besides our goal to find or produce a thermostable exonuclease, the structural and catalytic data of Af_Exo and a series of mutant proteins, based on the crystal structure, provide new insight into the mechanism of abasic site recognition and repair. Each of the hydrophobic residues Phe 200, Trp 215 and Val 217, forming a binding pocket for the abasic deoxyribose in Af_Exo, were mutated to glycine or serine. By expanding the size of the binding pocket the unspecific endonucleolytic activity is increased. Thus, size and flexibility of the mostly hydrophobic binding pocket have a significant influence on AP-site specificity. We suggest that its tight fitting to the flipped-out deoxyribose allows for a preferred competent binding of abasic sites. In a larger or more flexible pocket however, intact nucleotides more easily bind in a catalytically competent conformation, resulting in loss of specificity. Moreover, with mutations of Phe 200 and Trp 215 we induced a strong exonucleolytic activity on undamaged DNA.     

Refined crystal structure of the potato inhibitor complex of carboxypeptidase A at 2.5 Å resolution

The exopeptidase carboxypeptidase A forms a tight complex with a 39 residue inhibitor protein from potatoes. We have determined the crystal structure of this complex, and refined the atomic model to a crystallographic R-factor of 0.196 at 2.5 Å resolution. The structure of the inhibitor protein is organized around a core of disulfide bridges. No α-helices or β-sheets are present in this protein, although there is one turn of 3₁₀ helix. The four carboxy-terminal residues of the inhibitor protein bind in the active site groove of carboxypeptidase A, defining binding subsites S′₁, S₁, S₂ and S₃ on the enzyme. The carboxy-terminal glycine of the inhibitor is cleaved from the remainder of the inhibitor in the complex, and remains trapped in the back of the active site pocket. Interactions between the inhibitor and residues Tyr248 and Arg71 of carboxypeptidase A resemble possible features of binding stages for substrates both prior and subsequent to peptide bond hydrolysis. Not all of these interactions would be available to different types of ester substrates, however, which may be in part responsible for the observed kinetic differences in hydrolysis between peptides and various classes of esters. With the exception of residues involved in the binding of the inhibitor protein (such as Tyr248), the structure of carboxypeptidase A as determined in the inhibitor complex is quite similar to the structure of the unliganded enzyme (Lipscomb et al., 1968), which was solved from an unrelated crystal form.     

The 2.2 A crystal structure of Hsp33: a heat shock protein with redox-regulated chaperone activity

BACKGROUND: One strategy that cells employ to respond to environmental stresses (temperature, oxidation, and pathogens) is to increase the expression of heat shock proteins necessary to maintain viability. Several heat shock proteins function as molecular chaperones by binding unfolded polypeptides and preventing their irreversible aggregation. Hsp33, a highly conserved bacterial heat shock protein, is a redox-regulated molecular chaperone that appears to protect cells against the lethal effects of oxidative stress. RESULTS: The 2.2 A crystal structure of a truncated E. coli Hsp33 (residues 1-255) reveals a domain-swapped dimer. The core domain of each monomer (1-178) folds with a central helix that is sandwiched between two beta sheets. The carboxyl-terminal region (179-235), which lacks the intact Zn binding domain of Hsp33, folds into three helices that pack on the other subunit. The interface between the two core domains is comprised of conserved residues, including a rare Glu-Glu hydrogen bond across the dyad axis. Two potential polypeptide binding sites that span the dimer are observed: a long groove containing pockets of conserved and hydrophobic residues, and an intersubunit 10-stranded beta sheet "saddle" with a largely uncharged or hydrophobic surface. CONCLUSIONS: Hsp33 is a dimer in the crystal structure. Solution studies confirmed that this dimer reflects the structural changes that occur upon activation of Hsp33 as a molecular chaperone. Patterns of conserved residues and surface charges suggest that two grooves might be potential binding sites for protein folding intermediates.     

Structure-guided reshaping of the acyl binding pocket of ‘TesA thioesterase enhances octanoic acid production in E. coli

Medium-chain fatty acids (C6–C10) have attracted much attention recently for their unique properties compared to their long-chain counterparts, including low melting points and relatively higher carbon conversion yield. Thioesterase enzymes, which can catalyze the hydrolysis of acyl-ACP (acyl carrier protein) to release free fatty acids (FAs), regulate both overall FA yields and acyl chain length distributions in bacterial and yeast fermentation cultures. These enzymes typically prefer longer chain substrates. Herein, seeking to increase bacterial production of MCFAs, we conducted structure-guided mutational screening of multiple residues in the substrate-binding pocket of the E. coli thioesterase enzyme ‘TesA. Confirming our hypothesis that enhancing substrate selectivity for medium-chain acyl substrates would promote overall MCFA production, we found that replacement of residues lining the bottom of the pocket with more hydrophobic residues strongly promoted the C8 substrate selectivity of ‘TesA. Specifically, two rounds of saturation mutagenesis led to the identification of the ‘TesA^RD−2 variant that exhibited a 133-fold increase in selectivity for the C8-ACP substrate as compared to C16-ACP substrate. Moreover, the recombinant expression of this variant in an E. coli strain with a blocked β-oxidation pathway led to a 1030% increase in the in vivo octanoic acid (C8) production titer. When this strain was fermented in a 5-L fed-batch bioreactor, it produced 2.7 g/L of free C8 (45%, molar fraction) and 7.9 g/L of total free FAs, which is the highest-to-date free C8 titer to date reported using the E. coli type II fatty acid synthetic pathway. Thus, reshaping the substrate binding pocket of a bacterial thioesterase enzyme by manipulating the hydrophobicity of multiple residues altered the substrate selectivity and therefore fatty acid product distributions in cells. Our study demonstrates the relevance of this strategy for increasing titers of industrially attractive MCFAs as fermentation products.     

Crystal structures of substrate and inhibitor complexes of ribose 5-phosphate isomerase A from <Emphasis Type="Italic">Vibrio vulnificus</Emphasis> YJ016

Ribose-5-phosphate isomerase A (RpiA) plays an important role in interconverting between ribose-5-phosphate (R5P) and ribulose-5-phosphate in the pentose phosphate pathway and the Calvin cycle. We have determined the crystal structures of the open form RpiA from Vibrio vulnificus YJ106 (VvRpiA) in complex with the R5P and the closed form with arabinose-5-phosphate (A5P) in parallel with the apo VvRpiA at 2.0 Å resolution. VvRpiA is highly similar to Eschericihia coliRpiA, and the VvRpiA-R5P complex strongly resembles the E. coli RpiA-A5P complex. Interestingly, unlike the E. coli RpiA-A5P complex, the position of A5P in the VvRpiA-A5P complex reveals a different position than the R5P binding mode. VvRpiA-A5P has a sugar ring inside the binding pocket and a phosphate group outside the binding pocket: By contrast, the sugar ring of A5P interacts with the Asp4, Lys7, Ser30, Asp118, and Lys121 residues; the phosphate group of A5P interacts with two water molecules, W51 and W82.