The IS1111 family members IS4321 and IS5075 have subterminal inverted repeats and target the terminal inverted repeats of Tn21 family transposons

IS5075 and IS4321 are closely related (93.1% identical) members of the IS1111 family that target a specific position in the 38-bp terminal inverted repeats of Tn21 family transposons and that are inserted in only one orientation. They are 1,327 bp long and have identical ends consisting of short inverted repeats of 12 bp with an additional 7 bp (TAATGAG) or 6 bp (AATGAG) to the left of the left inverted repeats and 3 bp (AGA) or 4 bp (AGAT) to the right of the right inverted repeat. Circular forms of IS5075 and IS4321 in which the inverted repeats are separated by abutting terminal sequences (AGATAATGAG) were detected. A similar circular product was found for the related ISPa11. Transposition of IS4321 into the 38-bp target site was detected, but a flanking duplication was not generated. The precisely reconstituted target site was also identified. Over 50 members of the IS1111 family were identified. They encode related transposases, have related inverted repeats, and include related bases that lie outside these inverted repeats. In some, the flanking bases number 5 or 6 on the left and 4 or 3 on the right. Specific target sites were found for several of these insertion sequence (IS) elements. IS1111 family members therefore differ from the majority of IS elements, which are characterized by terminal inverted repeats and a target site duplication, and from members of the related IS110 family, which do not have obvious inverted repeats near their termini.     

Chemical reactions in double-stranded nucleic acids. IX. Directed introduction of substituted pyrophosphate bonds into DNA structure

An effective synthesis of oligodeoxyribonucleotides containing a substituted pyrophosphate bond in the definite position of the sugar-phosphate backbone has been developed by template-directed condensation of two heptanucleotides. One of them containing 5'-phosphate group to be activated and 3'-phosphate group of the other being substituted with ethoxy-, buthylamino-, morpholino- or ethyl glycinate residues. Water-soluble carbodiimide (EDAC) proved to be more efficient in the phosphate group activation than N-hydroxybenzotriazole ester (yields of substituted pyrophosphates 35-80 and 10-15% respectively). The substituted pyrophosphate bong is quite stable in neutral aqueous solution. Mild conditions of selective cleavage of this bond yielding the initial oligonucleotides were found.     

Chemical reactions in double-stranded nucleic acids. The nature of the bond formed during chemical ligation using a cis-diol group

Chemical and enzymatic ligation between the 5'-terminal phosphate of one oligonucleotide and the 3'-terminal 2',3'-cis-diol group of the other oligonucleotide on a complementary template was studied. Carbodiimide, imidazolide and N-hydroxybenzotriazole ester methods were used for chemical activation of the phosphate group, and T4 DNA ligase for enzymatic ligation. All the chemical activation methods produced 3',5'- and 2',5'-phosphodiester bonds (40-45 and 55-60%, resp.), whereas enzymatic ligation gave the product only with 3',5'-phosphodiester bond.     

Chemical reactions in double-stranded nucleic acids. VI. N-hydroxybenzotriazole esters of oligonucleotides--reagents for synthesis of DNA-duplexes with modified sugar-phosphate backbone

With the aid of a new type of phosphorylating agents, N-hydroxybenzotriazole phosphodiesters of oligonucleotides, template-directed synthesis of DNA duplexes was carried out with ribonucleotide, aliphatic diamine or amino acid residues at a predetermined position of the sugar-phosphate backbone. Introduction of a ribonucleotide into an oligonucleotide strand gives rise to a mixture of 2'-5' and 3'-5' isomers, whose ratio depends on the condensation conditions. Residues of amino acids (lysine, serine, tyrosine) or aliphatic diamines were substituted for one or two mononucleotides in the duplex. Phosphoamide bonds with the participation of an aliphatic diamine or lysine are formed most efficiently in the presence of N-methylimidazole and if the reacting groups are in the close proximity to each other. Phosphodiester bond synthesis with the participation of hydroxy groups of serine or tyrosine proceeds less effectively. Oligonucleotide N-hydroxybenzotriazole esters exceeds previously used phosphoimidazolides in efficiency of the chemical ligation. An amino acid residue incorporated into the duplex may be used in construction of new compounds by joining the carboxyl with various groups.     

The terminal inverted repeats of IS911: requirements for synaptic complex assembly and activity

The bacterial insertion sequence IS911 transposes via a covalently closed circular intermediate. Circle formation involves transposase-mediated pairing of both insertion sequence ends. While full-length transposase, OrfAB, binds poorly in vitro to IS911 DNA fragments carrying a copy of the IS911 end, truncated protein derivatives carrying the first 135 (OrfAB[1-135]) or 149 (OrfAB[1-149]) amino acid residues bind efficiently. They generate a paired-end complex containing two such fragments which resembles that expected for the first synaptic complex. Shorter protein derivatives lacking a region involved in multimerisation do not form these complexes but modify the binding of OrfAB[1-135] and OrfAB[1-149]. DNaseI footprinting demonstrated that OrfAB[1-149] protects a sub-terminal (internal) region of the inverted repeats which includes two blocks of sequence (beta and gamma) conserved between the left (IRL) and right (IRR) ends. DNA binding assays in vitro and measurement of recombination activity in vivo of sequential deletion derivatives of the two inverted repeats suggested a model in which the N-terminal region of OrfAB binds the conserved boxes beta and gamma in a sequence-specific manner and anchors the two insertion sequence ends into a paired-end complex. The external region of the inverted repeat is proposed to contact the C-terminal transposase domain carrying the catalytic site.     

Recombination in recA cells between direct repeats of insertion element IS1.

The IS1 sequences that flank the Tn9 chloramphenicol acetyltransferase gene as direct repeats recombine after transformation into an Escherichia coli recA strain. The recombination requires the lambda pL promoter on the plasmid. A plasmid that contains mutant IS1 elements does not recombine. These results indicate that this recombination requires an IS1-specific gene product. The recombinational activity of IS1 may resolve transient cointegrates formed during the transposition of IS1. I discuss a possible role for the lambda pL promoter.     

Characterization of the terminal inverted repeats and their neighboring tandem repeats in the Chlorella CVK1 virus genome

A unique group of large icosahedral viruses that infect a unicellular green alga (Chlorella sp. NC64A) were isolated from freshwater sources in Japan. These viruses contain a linear double-stranded DNA (dsDNA) genome with hairpin ends. A physical map was constructed for the genomic DNA of CVK1 (Chlorella virus isolated in Kyoto, no. 1) by pulsed-field gel electrophoresis of restriction fragments. The nucleotide sequences around both termini of the CVK1 DNA revealed the presence of inverted terminal repeats (ITR) of approximately 1.0 kb. Adjacent to the ITR, unique sequence elements of 10 to 20 by were directly repeated 20 to 30 times in tandem array. Several copies of these repeat elements were deleted in virus mutants that were occasionally generated from Chlorella cells that were in a putative CVK1 carrier state. These repeats might represent a hot spot of rearrangement in the CVK1 genome.     

Binding sites for maize nuclear proteins in the terminal inverted repeats of the Mul transposable element

Summary Nuclear protein extracts from Mu-active, Mu-inactive and non-Mutator lines of maize were used to identify the binding sites for maize nuclear proteins in the terminal inverted repeats (TIR) of the Mul transposable element. We found binding activities of nuclear proteins that specifically interact with both TIRs of the Mu1 element. DNase I footprinting was performed to localize the binding sites. We found that the nuclear proteins from Mu-active lines and non-Mu lines bound to the Mu1 TIR at two different sites, i.e. a 13 by sequence (CGGGAACGGTAAA, designated as site I) and another 8 by sequence (CGGCGTCT, designated as site II). However, the nuclear proteins from Mu-inactive lines bound only one of these sites, i.e. site I. Mobility shift assays with synthetic oligonucleotides containing site I and 11 respectively confirmed the specificities of these binding activities. Site I was shown to be an imperfect direct repeat of a hexamer binding site (CGGGAA CGGTAA). Oligonucleotides containing either of the hexamers showed specific binding activity to nuclear protein from both Mu-active and Mu-inactive lines. The possible role of these proteins in Mu transposition is discussed.     

Characterization of the terminal inverted repeats and their neighboring tandem repeats in the Chlorella CVK1 virus genome

A unique group of large icosahedral viruses that infect a unicellular green alga (Chlorella sp. NC64A) were isolated from freshwater sources in Japan. These viruses contain a linear double-stranded DNA (dsDNA) genome with hairpin ends. A physical map was constructed for the genomic DNA of CVK1 (Chlorella virus isolated in Kyoto, no. 1) by pulsed-field gel electrophoresis of restriction fragments. The nucleotide sequences around both termini of the CVK1 DNA revealed the presence of inverted terminal repeats (ITR) of approximately 1.0 kb. Adjacent to the ITR, unique sequence elements of 10 to 20 by were directly repeated 20 to 30 times in tandem array. Several copies of these repeat elements were deleted in virus mutants that were occasionally generated from Chlorella cells that were in a putative CVK1 carrier state. These repeats might represent a hot spot of rearrangement in the CVK1 genome.     

The N-terminal domain of the insertion sequence 30 transposase interacts specifically with the terminal inverted repeats of the element

The gene for the insertion sequence (IS) 30 transposase is placed under the control of the tac promoter, and large quantities of transposase are expressed upon induction. The resulting protein precipitates inside the Escherichia coli cells in the form of inclusion bodies which, upon cell lysis, cannot be dissolved under nondenaturing conditions. In contrast, the N-terminal third of the transposase, a 17-kDa protein produced by a truncated gene, can be purified and is able to interact site specifically with the ends of the IS30 element. In DNase I footprint experiments, regions of 26 nucleotides on one DNA strand and 19 nucleotides on the other strand at either end of the element are protected from nuclease digestion. It is concluded that a functional DNA-binding domain can be formed by expression of only one-third of the complete IS30 transposase. Sequence comparison shows a homology of the IS30 ends to the ends of IS4351 and to the L1 end of bacteriophage Mu.     

Structure-function analysis of the inverted terminal repeats of the sleeping beauty transposon

Translocation of Sleeping Beauty (SB) transposon requires specific binding of SB transposase to inverted terminal repeats (ITRs) of about 230 bp at each end of the transposon, which is followed by a cut-and-paste transfer of the transposon into a target DNA sequence. The ITRs contain two imperfect direct repeats (DRs) of about 32 bp. The outer DRs are at the extreme ends of the transposon whereas the inner DRs are located inside the transposon, 165-166 bp from the outer DRs. Here we investigated the roles of the DR elements in transposition. Although there is a core transposase-binding sequence common to all of the DRs, additional adjacent sequences are required for transposition and these sequences vary in the different DRs. As a result, SB transposase binds less tightly to the outer DRs than to the inner DRs. Two DRs are required in each ITR for transposition but they are not interchangeable for efficient transposition. Each DR appears to have a distinctive role in transposition. The spacing and sequence between the DR elements in an ITR affect transposition rates, suggesting a constrained geometry is involved in the interactions of SB transposase molecules in order to achieve precise mobilization. Transposons are flanked by TA dinucleotide base-pairs that are important for excision; elimination of the TA motif on one side of the transposon significantly reduces transposition while loss of TAs on both flanks of the transposon abolishes transposition. These findings have led to the construction of a more advanced transposon that should be useful in gene transfer and insertional mutagenesis in vertebrates.     

Protein-primed DNA replication: role of inverted terminal repeats in the Escherichia coli bacteriophage PRD1 life cycle.

Escherichia coli bacteriophage PRD1 and its relatives contain linear double-stranded DNA genomes, the replication of which proceeds via a protein-primed mechanism. Characteristically, these molecules contain 5'-covalently bound terminal proteins and inverted terminal nucleotide sequences (inverted terminal repeats [ITRs]). The ITRs of each PRD1 phage species have evolved in parallel, suggesting communication between the molecule ends during the life cycle of these viruses. This process was studied by constructing chimeric PRD1 phage DNA molecules with dissimilar end sequences. These molecules were created by combining two closely related phage genomes (i) in vivo by homologous recombination and (ii) in vitro by ligation of appropriate DNA restriction fragments. The fate of the ITRs after propagation of single genomes was monitored by DNA sequence analysis. Recombinants created in vivo showed that phages with nonidentical genome termini are viable and relatively stable, and hybrid phages made in vitro verified this observation. However, genomes in which the dissimilar DNA termini had regained identical sequences were also detected. These observations are explained by a DNA replication model involving two not mutually exclusive pathways. The generality of this model in protein-primed DNA replication is discussed.     

Terminal inverted repeats of insertion sequence IS30 serve as targets for transposition.

In the present study, we demonstrate that the terminal inverted repeats of the Escherichia coli insertion sequence IS30 are functional target sites for the transposition of the (IS30)2 dimer, which represents an intermediate structure in the transposition of IS30. Comparative analysis of various target regions revealed that the left and right ends differ in their "attractivity." In our experiments, the joined left and right ends, i.e., the (IS30)2 intermediate structure, was found to be the most preferred target. It was also shown that flanking sequences can influence the target activity of the terminal repeats. The functional part of the target region was localized in the inverted repeats by means of mutational analysis, and it corresponds to the binding site of IS30 transposase. Insertion of 1 bp into the right inverted repeat resulted in unusual target duplication accompanied by gene conversion. The choice of the terminal inverted repeats as targets in transposition leads to the reconstruction of the (IS30)2 structure, which may induce a cascade of further rearrangements. Therefore, this process can play a role in the evolution of the genome.     

Statistical mechanical deconvolution of thermal transitions in macromolecules. III. Application to double-stranded to single-stranded transitions of nucleic acids

The statistical mechanical deconvolution theory for macromolecular conformational transitions is extended to the case of nucleic acids transitions involving strand separation. It is demonstrated that the partition function, Q, as well as all the relevant thermodynamic quantities of the system, can be calculated from experimental scanning calorimetric data. In particular, it is shown that important thermodynamic parameters such as the size of the average cooperative unit during strand separation, the mean helical segment length, and the mean coil-segment length can be calculated from the average excess enthalpy function 〈ΔH〉. The theory is applied to the double-stranded to single-stranded transition of the system poly(A)·poly(U) at different salt concentrations. It is shown that the mean helical segment length is a monotonically decreasing function of the temperature well before strand separation occurs. On the other hand, the mean coil segment length remains practically constant until temperatures very close to T_m. Both experimental findings clearly indicate that the unfolding of poly(A)·poly(U) proceeds through the formation of many short helical sequences. The cooperative unit for the strand separation is calculated to be about 120 base pairs and essentially independent of the salt concentration. The existence of a minimum helical segment length of 10 ± 2 base pairs within the double-stranded form is calculated.     

Nucleotide sequence analysis of the unusually long terminal inverted repeats of a giant linear plasmid, SCP1.

SCP1 is a giant linear plasmid of 350 kb coding for the methylenomycin biosynthetic genes in Streptomyces coelicolor. The unusually long terminal inverted repeats present on both ends of SCP1 were analyzed on the nucleotide sequence level. Analysis of six clones containing the terminal 0.35-kb XbaI fragment revealed a slight heterogeneity in the nucleotide sequences of the SCP1 ends. Moreover, it was indicated that this fragment contained seven palindromic inverted repeats and a GT-rich region in the 5'-end strand. The size of the terminal inverted repeats was determined to be 81 kb by the cloning and sequencing of their end-points. An insertion sequence, IS466 was shown to be present just at the end of the right terminal inverted repeat.     

Interaction of the antineoplastic agent mitoxantrone with double-stranded nucleic acids

The binding of mitoxantrone with double-helical nucleic acids was investigated by the methods of isothermal microcalorimetry, circular dichroism and absorption at the ionic strength mu = 0.11 and 0.011 M NaCl at temperature region of 30 divided by 60 degrees C. The investigation shows, that at mu = 0.11 M NaCl mitoxantrone interacts with double-helical nucleic acids in one way only. For such conditions using spectrophotometric titration data Scatchard plots for the binding of mitoxantrone with double-helical nucleic acids were constructed. The calculations show that the saturation stoichiometry is one mitoxantrone molecule per 2 divided by 3 base pairs DNA and 6 divided by 8 base pairs RNA. The dependence of binding constant from GC-content is observed. It is shown that the binding enthalpy of mitoxantrone with DNA and RNA increases linearly and reaches -(3.0 +/- 0.5) kkal per 1 mol mitoxantrone. It is shown that a binding mitoxantrone with double-helical nucleic acids, besides the intercalation of rings, a determinate contribution in the binding is given also by electrostatic interaction of side chains mitoxantrone with nucleic acids.     

Detection of an IS2-encoded 46-kilodalton protein capable of binding terminal repeats of IS2.

The genome of the transposable element IS2 contains five open reading frames that are capable of encoding proteins greater than 50 amino acids; however, only one IS2 protein of 14 kDa had been detected. By replacing the major IS2 promoter located in the right terminal repeat of IS2 with the T7 promoter to express IS2 genes, we have detected another IS2 protein of 46 kDa. This 46-kDa protein was designated InsAB'. Analyses of the InsAB' sequence revealed motifs that are characteristic of transposases of other transposable elements. InsAB' has the ability to bind both terminal repeat sequences of IS2. It was shown to bind a 27-bp sequence (5'-GTTAAGTGATAACAGATGTCTGGAAAT-3', positions 1316 to 1290 by our numbering system [16 to 42 by the previous numbering system]) located at the inner end of the right terminal repeat and a 31-bp sequence (5'-TTATTTAAGTGATATTGGTTGTCTGGAGATT-3', positions 46 to 16 [1286 to 1316]), including the last 27 bp of the inner end and the adjacent 4 bp of the left terminal repeat of IS2. This result suggests that InsAB' is a transposase of IS2. Since there is no open reading frame capable of encoding a 46-kDa protein in the entire IS2 genome, this 46-kDa protein is probably produced by a translational frameshifting mechanism.     

Intraspecific variability of the terminal inverted repeats of the linear chromosome of Streptomyces ambofaciens

The sequences of the terminal inverted repeats (TIRs) ending the linear chromosomal DNA of two Streptomyces ambofaciens strains, ATCC23877 and DSM40697 (198 kb and 213 kb, respectively), were determined from two sets of recombinant cosmids. Among the 215 coding DNA sequences (CDSs) predicted in the TIRs of strain DSM40697, 65 are absent in the TIRs of strain ATCC23877. Reciprocally, 45 of the 194 predicted CDSs are specific to the ATCC23877 strain. The strain-specific CDSs are located mainly at the terminal end of the TIRs. Indeed, although TIRs appear almost identical over 150 kb (99% nucleotide identity), large regions of DNA of 60 kb (DSM40697) and 48 kb (ATCC23877), mostly spanning the ends of the chromosome, are strain specific. These regions are rich in plasmid-associated genes, including genes encoding putative conjugal transfer functions. The strain-specific regions also share a G+C content (68%) lower than that of the rest of the genome (from 71% to 73%), a percentage that is more typical of Streptomyces plasmids and mobile elements. These data suggest that exchanges of replicon extremities have occurred, thereby contributing to the terminal variability observed at the intraspecific level. In addition, the terminal regions include many mobile genetic element-related genes, pseudogenes, and genes related to adaptation. The results give insight into the mechanisms of evolution of the TIRs: integration of new information and/or loss of DNA fragments and subsequent homogenization of the two chromosomal extremities.