Iridium(III)-vinylidene chemistry: Conversion of an iridacyclopentadiene-chlorido complex and terminal alkynes to iridacyclopentadiene-vinyl complexes

The reactions of [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(Cl) (9, R = CO₂Me) with propargyl alcohol derivatives (2-propyn-1-ol, 2-methyl-3-butyn-2-ol, 1-ethynylcyclopentanol, and 1-ethynylcyclooctanol), in the presence of water leads to the formation of iridium(III)-vinyl complexes bearing the general structure [κ²(C¹,C⁴)-CRCRCRCR](PPh₃)₂Ir(CO)(κ¹-vinyl) where vinyl = -CHCH₂, -(E)-CHCHMe, -CHC(CH₂)₄, or -CHC(CH₂)₇. In these, the CO ligand was derived from the terminal carbon of the starting alkyne and the oxygen atom from water. Under anhydrous conditions, 9 undergoes reaction with 2-propyn-1-ol to give trimethyl 1,3-dihydro-3-oxo-4,5,6-isobenzofurantricarboxylate, the result of a cycloaromatization/transesterification involving the buta-1,3-dien-1,4-diyl ligand in 9 and 2-propyn-1-ol.     

Oxidovanadium(IV) complexes containing ligands derived from dithiocarbazates - Models for the interaction of VO with thiofunctional ligands

The tetragonal-pyramidal VO²⁺ complexes [VO{(RSC-S)N-NX}₂] (1-6) were synthesised by the reactions of VO(OCHMe₂)₃ with the dithiocarbazate ligands RSC(S)-NH-NX, where X = cyclo-pentyl, cyclo-hexyl or 4-Me₂N-C₆H₄-CH, and R = CH₃ or CH₂C₆H₅. The compounds were characterised by elemental analysis, IR- and mass spectrometries, and in cases of compounds 1, 3, 4 and 5, by X-ray diffraction. The chiral compound 4 (X = cyclo-hexyl, R = CH₂C₆H₅) crystallises in the C configuration. In compound 5, the VO moiety is disordered (83.3:16.7%) with respect to the plane spanned by the four equatorial ligand functions.     

Diphosphinoazine rhodium(III) and iridium(III) octahedral complexes

Rhodium(III) and iridium(III) octahedral complexes of general formula [MCl₃{R₂PCH₂C(Bu^t)NNC(Bu^t)CH₂PR₂}] (M = Rh, Ir; R = Ph, c-C₆H₁₁, Prⁱ, Bu^t; not all the combinations) were prepared either from the corresponding diphosphinoazines and RhCl₃ · 3H₂O or by the oxidation of previously reported bridging complexes [{MCl(1,2-η:5,6-η-CHCHCH₂CH₂CHCHCH₂CH₂)}₂{μ-R₂PCH₂C(Bu^t)NNC(Bu^t)CH₂PR₂}] with chlorine-containing solvents. Depending on the steric properties of the ligands, complexes with facial or meridional configuration were obtained. Crystal and molecular structures of three facial and two meridional complexes were determined by X-ray diffraction. Hemilability of ligand in the complex fac-[RhCl₃{(C₆H₁₁)₂PCH₂C(Bu^t)NNC(Bu^t)CH₂P(C₆H₁₁)₂}] consisting in reversible decoordination of the phosphine donor group in the six-membered ring was observed as the first step of isomerization between fac and mer isomers.     

Ferrocenyl-substituted allenylidene complexes of chromium, molybdenum and tungsten: Synthesis, structure and reactivity

Bis(ferrocenyl)-substituted allenylidene complexes, [(CO)₅MCCCFc₂] (1a-c, Fc = (C₅H₄)Fe(C₅H₅), M = Cr (a), Mo (b), W (c)) were obtained by sequential reaction of Fc₂CO with Me₃Si-CCH, KF/MeOH, n-BuLi, and [(CO)₅M(THF)]. For the synthesis of related mono(ferrocenyl)allenylidene chromium complexes, [(CO)₅CrCCC(Fc)R] (R = Ph, NMe₂), three different routes were developed: (a) reaction of the deprotonated propargylic alcohol HCCC(Fc)(Ph)OH with [(CO)₅Cr(THF)] followed by desoxygenation with Cl₂CO, (b) Lewis acid induced alcohol elimination from alkenyl(alkoxy)carbene complexes, [(CO)₅CrC(OR)CHC(NMe₂)Fc], and (c) replacement of OMe in [(CO)₅CrCCC(OMe)NMe₂] by Fc. Complex 1a was also formed when the mono(ferrocenyl)allenylidene complex [(CO)₅CrCCC(Fc)NMe₂] was treated first with Li[Fc] and the resulting adduct then with SiO₂. The replacement route (c) was also applied to the synthesis of an allenylidene complex (7a) with a CC spacer in between the ferrocenyl unit and C_γ of the allenylidene ligand, [(CO)₅CrCCC(NMe₂)-CCFc]. The related complex containing a CHCH spacer (9a) was prepared by condensation of [(CO)₅CrCCC(Me)NMe₂] with formylferrocene in the presence of NEt₃. The bis(ferrocenyl)-substituted allenylidene complexes 1a-c added HNMe₂ across the C_α-C_β bond to give alkenyl(dimethylamino)carbene complexes and reacted with diethylaminopropyne by regioselective insertion of the CC bond into the C_β-C_γ bond to afford alkenyl(diethylamino)allenylidene complexes, [(CO)₅MCCC(NEt₂)CMeCFc₂]. The structures of 5a, 7a, and 9a were established by X-ray diffraction studies.     

Alkoxy-substituted group 6 allenylidene complexes - Synthesis and properties

Bis(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)OR], as well as mono(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR′)Ph], of chromium and tungsten are accessible from propynones [HCCC(O)Ph] or propynoic acid esters [HCCC(O)OR; R = Et, (−)-menthyl, endo-bornyl] by the following reaction sequence: (a) deprotonation of the alkynes, (b) reaction with [(CO)₅M-THF] (M = Cr, W), and (c) alkylation of the resulting alkynyl metallate, [(CO)₅MCCC(O)R], with Meerwein salts. Vinylidene complexes, [(CO)₅MCC(R′)C(O)OR], are formed as a by-product by C_β-alkylation of the alkynyl metallate. Dimethylamine displaces one alkoxy substituent of the bis(alkoxy)allenylidene complexes to give dimethylamino(alkoxy)allenylidene complexes, [(CO)₅MCCC(OR)NMe₂]. The analogous reaction of dimethylamine with a mono(alkoxy)-substituted allenylidene complex affords the aminoallenylidene complex [(CO)₅CrCCC(NMe₂)Ph]. When the amine is used in large excess, the α,β-unsaturated aminocarbene complex [(CO)₅CrC(NMe₂)C(H)C(NMe₂)Ph] is additionally formed by addition of the amine across the C_αC_β-bond of the allenylidene ligand. The reaction of [(CO)₅MCCC(OEt)₂] with dimethyl ethylenediamine offers access to bis(amino)allenylidene complexes, in which C_γ is part of a five-membered heterocycle. Photolysis of bis(alkoxy)allenylidene complexes in the presence of triphenylphosphine yields tetracarbonyl- and tricarbonyl{bis(phosphine)}allenylidene complexes. Diethylaminopropyne inserts into the C_βC_γ bond of [(CO)₅MCCC(OEt)OMethyl] to give alkenylallenylidene complexes. Subsequent acid-catalyzed intramolecular cyclization affords a pyranylidene complex.     

Synthesis and reactivity of gold(III) complexes containing cycloaurated iminophosphorane ligands

Transmetallation reactions of ortho-mercurated iminophosphoranes (2-ClHgC₆H₄)Ph₂PNR with [AuCl₄]⁻ gives new cycloaurated iminophosphorane complexes of gold(III) (2-Cl₂AuC₆H₄)Ph₂PNR [R = (R,S)- or (S)-CHMePh, p-C₆H₄F, ^tBu], characterised by NMR and IR spectroscopies, ESI mass spectrometry and an X-ray structure determination on the chiral derivative R = (S)-CHMePh. The chloride ligands of these complexes can be readily replaced by the chelating ligands thiosalicylate and catecholate; the resulting derivatives show markedly higher anti-tumour activity versus P388 murine leukaemia cells compared to the parent chloride complexes. Reaction of (2-Cl₂AuC₆H₄)Ph₂PNPh with PPh₃ results in displacement of a chloride ligand giving the cationic complex [(2-Cl(PPh₃)AuC₆H₄)Ph₂PNPh]⁺, indicating that the PN donor is strongly bonded to the gold centre.     

Gas-phase molecular structures of substituted 1,3-bisketenes: A challenge for theory and experiment

Molecular structures of dimethylbis(trimethylsilylketyl)silane (Me₂Si[C(SiMe₃)CO]₂), dimethylbis(trimethylgermylketyl)silane (Me₂Si[C(GeMe₃)CO]₂), and dimethylbis(trimethylstannylketyl)germane (Me₂Ge[C(SnMe₃)CO]₂) have been studied in the gas phase by electron diffraction accompanied by high level ab initio and DFT calculations. Extensive theoretical conformational analyses of the molecules in the vapour predicted a possibility of existence of two types of conformers with small energy differences. The first type had gauche-gauche arrangements of the ketenyl groups in the central C(CO)XC(CO) fragments directed away from each other. The second type had nearly syn-gauche arrangements of the ketenyl groups. In addition, the energy differences were found to depend on the level of computations used. The experimental analysis, in turn, was unable to distinguish between different conformers due to the large number of similar overlapping distances. The experimental data were fitted by an averaged single-conformer model, which nevertheless allowed reliable determination of bonds and bonded angles in the molecules. Main experimental (r_h1) structural parameters for Me₂Si[C(SiMe₃)CO]₂, Me₂Si[C(GeMe₃)CO]₂, and Me₂Ge[C(SnMe₃)CO]₂, i.e. Me₂X[C(YMe₃)CO]₂ (X,Y = Si, Ge, Sn), are (X-C)_mean 187.7(1) pm, 194.6(2) pm, 216.1(3) pm; (Y-C)_mean, 187.7(1) pm, 188.8(8) pm, 194.6(4) pm; (CC)_mean, 135.3(5) pm, 131.6(5) pm, 131.5(13) pm; (CO)_mean, 117.0(7) pm, 117.4(7) pm, 119.0(11) pm; (C-H)_mean, 110.6(7) pm, 110.0(4) pm, 109.1(13) pm; (X(Y)-CC)_mean, 114.4(2)°, 115.6(1)°, 115.6(2)°; (C-X(Y)-C_Me)_mean, 108.3(3)°, 108.4(3)°, 108.9(13)°; C(2)-C(1)-Y(4)-C(10), −19(6)°, 5(4)°, −9(10)°; C(7)-C(6)-Y(9)-C(38),−22(7)°, −32(3)°, −9(10)°; C(2)-C(1)-X(5)-C(6), 128(4)°, 142(1)°, 108(9)°; C(7)-C(6)-X(5)-C(1), 92(6)°, 115(2)°, 108(9)°, respectively.     

Reactivity of alkynyl Pd(II) azido complexes toward organic isocyanides, isothiocyanates, and nitriles

Alkynyl Pd(II) azido complexes of the type [Pd(N₃)(CCR)L₂] (1-3) were obtained by reactions of aqueous NaN₃ with [Pd(Cl)(CCR)L₂] (R = Ph or C(O)OMe). Treating compounds 1-3 with organic isocyanides (R-NC) afforded novel complexes, trans-[Pd(CCPh)(NCNR)(PMe₃)₂] (R = 2,6-Me₂C₆H₃ (4) or 2,6-Et₂C₆H₃ (5)) and trans-[Pd(CCR)(CN₄-t-Bu)L₂] (6: L = PMe₃, R = Ph; 7: L = PEt₃, R = C(O)OMe; 8: L = PMe₃, R = C(O)OMe), which contain either a carbodiimido or a C-coordinated tetrazolato group. Reactions of compounds 1 and 2 with R-NCS (R = 2,6-Me₂C₆H₃ or CH₂CH₃) and 1,4-phenylene diisothiocyanate (C₆H₄(NCS)₂) smoothly proceeded to give tetrazole-thiolato complexes, trans-[Pd(CCPh)(SCN₄-R)L₂] (L = PMe₃, R = Et (9) or 2,6-Me₂C₆H₃ (10); L = PEt₃, R = 2,6-Me₂C₆H₃ (11)), and a phenylene-bridged dinuclear Pd(II) tetrazole-thiolato complex, [(PEt₃)₂(CCPh)Pd(SCN₄-(μ-C₆H₄)-SCN₄)Pd(CCPh)(PEt₃)₂] (12), respectively. Complexes 9-12 contain the Pd-S bond that is formed by the dipolar cycloaddition of the organic isothiocyanate to the Pd-azido bond. In contrast, the corresponding reactions of compounds 1and 2 with C₆F₅CN and Me₃SiCN (organic nitriles, R-CN) gave an N-coordinated Pd(II)-tetrazolato compound {trans-[Pd(CCPh)(N₄C-C₆F₅)(PMe₃)₂] (13)} and a mixture of Pd(II)-cyano complexes {trans-[Pd(CCPh)(CN)(PEt₃)₂] (14) and [Pd(CN)₂(PEt₃)₂] (15)}, respectively. Bis(phosphine) bis(cyano) complexes of Pd and Ni, [M(CN)₂L₂] (L = PEt₃, PMe₃; L₂ = DEPE), could be obtained independently by the reactions of [M(N₃)₂L₂] with excess Me₃SiCN in organic solvents.     

Synthesis and solid-state structures of (triphos)iridacyclopentadiene complexes as models for vinylidene intermediates in the [2 + 2 + 1] cyclotrimerization of alkynes

The iridium 1,1,1-tris(diphenylphosphinomethyl)ethane (triphos) complexes [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(NCMe)]BF₄ (2-NCMe, R = CO₂Me) and [{κ²(C¹,C⁴)-CRCRCRCR}{CH₃C(CH₂PPh₂)₃}Ir(CO)]BF₄ (2-CO, R = CO₂Me) serve as models for proposed iridium-vinylidene intermediates of relevance to the [2 + 2 + 1] cyclotrimerization of alkynes. The solid-state structures of 2-NCMe, 2-CO, and [κ²(C¹,C⁴)-CRCRCRCR]{CH₃C(CH₂PPh₂)₃}Ir(Cl) (2-Cl), were determined by X-ray crystallography.     

A closer look at the phosphorus-phosphorus double bond lengths in meta-terphenyl substituted diphosphenes

The single crystal X-ray structure of DmpPPDmp (1, Dmp = 2,6-Mes₂C₆H₃), which was previously reported to have a relatively short PP bond distance of 1.985(2) Å at room temperature, has been reexamined at variable temperatures. Crystallographic analyses of 1 at 100 K allow for resolution of disorder of the two phosphorus atoms (which is unresolvable from room temperature diffraction data), and for determination of a more conventional PP bond length of 2.029(1) Å. Single crystals of the closely related diphosphene DxpPPDxp (2, Dxp = 2,6-(2,6-Me₂C₆H₃)₂C₆H₃) show similar disorder in one of two crystallographically independent molecules in the unit cell. A value of 2.0276(4) Å is found for the non-disordered PP bonds at 100 K for 2. A new diphosphene Ar′PPAr′ (3, Ar′ = 2,6-Mes₂-4-OMe-C₆H₃) has been prepared and its structure has also been examined. The PP bond length for 3 was determined to be 2.0326(9) Å and relatively free of the effects of disorder.     

Addition of protic nucleophiles to alkynyl methoxy carbene ligands in diiron complexes

Different protic nucleophiles (i.e.Ph₂CNH, PhSH, MeCO₂H, PhOH) can be added to the CC bond of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(OMe)CCTol}(Cp)₂][SO₃CF₃] (1), affording new diiron alkenyl methoxy carbene complexes.The additions of Ph₂CNH and MeCO₂H are regio and stereoselective, resulting in the formation of the 5-aza-1-metalla-1,3,5-hexatriene [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(NCPh₂)}(Cp)₂][SO₃CF₃] (2), and the 2-(acyloxy)alkenyl methoxy carbene complex [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)OC(O)Me)}(Cp)₂][CF₃SO₃] (5); the E isomer of the former and the Z of the latter are formed exclusively.Conversely, the addition of PhSH is regio but not stereoselective; thus, both the E and Z isomers of [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(OMe)C_βHC_γ(Tol)(SPh)}(Cp)₂][SO₃CF₃] (3) are formed in comparable amounts.Compounds 3 and 5 are demethylated upon chromatography through Al₂O₃, resulting in the formation of the acyl complexes [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)(SPh)}(Cp)₂] (4) and [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C_α(O)C_βHC_γ(Tol)OC(O)Me}(Cp)₂] (6), respectively, both with a Z configured C_βC_γ bond.Finally, the reaction of 1 with PhOH proceeds only in the presence of an excess of Et₃N affording the 2-(alkoxy)alkenyl acyl complex [Fe₂{μ-CN(Me)(Xyl)}(μ- CO)(CO){C_α(O)C_βHC_γ(Tol)(OPh)}(Cp)₂] (7). The crystal structures of 4 · CH₂Cl₂ and 7 · 0.5CH₂Cl₂ have been determined by X-ray diffraction experiments.     

Ketimine synthesis in the coordination sphere of thallium (I)

[AuTl(C₆F₅)₂(en)] (en = ethylenediamine) reacts with cyclic ketones as cyclopentanone (Cy⁵O), cyclohexanone (Cy⁶O) or cycloheptanone (Cy⁷O) in 1:1 or 1:2 molar ratio leading to products of stoichiometry [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NH₂}] (x = 5 1, 6 2 or 7 3), or [AuTl(C₆F₅)₂{Cy^xN(CH₂)₂NCy^x}] (x = 5 4, 6 5 or 7 6). Addition of ethylenediamine to the ketimine complexes in chloroform regenerates [AuTl(C₆F₅)₂(en)], the starting material, and the free ketimines, as their NMR and mass spectra evidenced. The ketimine complexes display luminescence in solid state at room temperature and at 77 K at higher wavelengths than the diamine starting product (505 nm). The excited states responsible for this behaviour are assigned to orbitals due to the gold-thallium interactions.     

Modification of aminoallenylidene complexes of chromium via exchange of the C3-bound amino group

The aminoallenylidene(pentacarbonyl)chromium complexes [(CO)₅CrCCC(NR¹R²)Ph] (1a-c) react with dimethylamine by addition of the amine to the C1C2 bond of the allenylidene ligand to give alkenyl(amino)carbene complexes [(CO)₅CrC(NMe₂)CHC(NR¹R²)Ph] (2a-c) (R¹ = Me: R² = Me (a), Ph (b); R¹ = Et: R² = Ph (c)). In contrast, addition of a large excess (usually 20 equivalents) of ammonia or primary amines, H₂NR, to solutions of [(CO)₅CrCCC(NMe₂)Ph] (1a) affords the aminoallenylidene complexes [(CO)₅CrCCC(NHR)Ph] (1d-w) in which the dimethylamino group is replaced by NH₂ or NHR, respectively. In addition to simple amines such as methylamine, butylamine, and aniline, amines carrying a functional group (allylamine, propargylamine) and amino acid esters as well as amino terpenes and amino sugars can be used to displace the NMe₂ substituent. Usually the Z isomer (with respect to the partial C3-N double bond) is formed exclusively. Products derived from addition of H₂NR to the C1C2 bond of 1a are not observed. The amino group in 1d-w is rapidly deprotonated by excess of amine to form iminium alkynyl chromates [1d-w]⁻, thus protecting 1d-w from addition of free amine to either C3 or across the C1C2 bond. The iminium alkynyl chromates are readily reprotonated by acids or by chromatography on wet SiO₂ to reform 1d-w.     

Ruthenium hydride and vinyl complexes supported by nitrogen-oxygen mixed-donor ligands

The Schiff base, 2-chlorophenylsalicylaldimine (HL₁), is formed readily from salicylaldehyde and 2-chloroaniline. After deprotonation, this ligand is found to react as a bidentate mixed-donor chelate with the complexes [RuRCl(CO)(BTD)(PPh₃)₂] (R = H, CHCHC₆H₅, CHCHC₆H₄Me-4, CHCH^tBu, CCCPhCHPh; BTD = 2,1,3-benzothiadiazole) to form the compounds [RuR(L₁)(CO)(PPh₃)₂] through displacement of the chloride and BTD ligands. An analogous reaction occurs with the osmium complex [OsHCl(CO)(BTD)(PPh₃)₂] to provide [OsH(L₁)(CO)(PPh₃)₂]. The compound [Ru(CHCHC₆H₄Me-4)(L₂)(CO)(PPh₃)₂] is formed through reaction of salicylaldehyde (HL₂) with [Ru(CHCHC₆H₄Me-4)Cl(CO)(BTD)(PPh₃)₂] in the presence of base. Two further ligands were investigated to extend the study to encompass 5- and 4-membered chelates; 8-hydroxyquinoline (HL₃) and 2-hydroxy-4-methylquinoline (HL₄) react with [Ru(CHCHPh)Cl(CO)(BTD)(PPh₃)₂] and [Ru(CHCHC₆H₄Me-4)Cl(CO)(BTD)(PPh₃)₂] in the presence of base to yield the complexes [Ru(CHCHPh)(L₃)(CO)(PPh₃)₂] and [Ru(CHCHC₆H₄Me-4)(L₄)(CO)(PPh₃)₂], respectively. The crystal structure of [Ru(CHCHC₆H₄Me-4)(L₁)(CO)(PPh₃)₂] is reported.     

Synthesis and coordination of the bifunctionalized ylides Ph2P(CH2)n(Ph)2PCHCOOMe (n = 1, 2) and ketenylidene Ph2P(CH2)2(Ph)2PCCO to Pd and Pt complexes

In this paper it is reported the synthesis of the phosphonium salts [Ph₂P(CH₂)_n(Ph)₂PCH₂COOMe]Br (n = 1 (1), 2 (2)) and [Ph₂P(CH₂COOMe)(CH₂)_n(Ph)₂PCH₂COOMe]Br₂ (n = 3 (3)) derived from the reactions of the diphosphines dppm, dppe and dppp with methyl bromoacetate. By reaction of the monophosphonium salt of dppm and dppe with the strong base Na[N(SiMe₃)₂] the corresponding carbonyl stabilized ylides Ph₂P(CH₂)_n(Ph)₂PCHCOOMe (n = 1 (4), 2 (5)) were obtained. The Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide was reacted with Pd(II) and Pt(II) substrates. From these reactions were isolated exclusively complexes in which the ylide was chelated to the metal through the free phosphine group and the ylidic carbon atom. A further reaction of the Ph₂P(CH₂)₂(Ph)₂PCHCOOMe (5) ylide with 1.5 equiv. of Na[N(SiMe₃)₂] gives the bifunctionalized ketenylidene Ph₂P(CH₂)₂(Ph)₂PCCO (6) system. This cumulenic ylide reacts with Pt(II) complexes to form a chelated derivative in which IR and NMR spectra suggest the breaking of the CC bond of the -CCO group.     

Synthesis and structural investigations of Ni(II)- and Pd(II)-coordinated α-diimines with chlorinated backbones

Novel square planar Pd(II) α-diimines [PdX₂{ArNC(Cl)}₂], where Ar = C₆H₅, (2,6-Me₂C₆H₃), (2,6-ⁱPr₂C₆H₃) and X = Cl or Br, and the octahedral Ni(II) complex [NiBr₂{(C₆H₅)NC(Cl)}₂(THF)₂] have been prepared and characterised by spectroscopic methods. For two of the Pd(II) complexes and the Ni(II) complex the crystal structures were determined by X-ray crystallography. A further insight into the geometry and electronic structure of [PdBr₂{(2,6-Me₂C₆H₃)NC(Cl)}₂] was gained using density functional theoretical calculations (DFT). This compound resembles structurally and electronically typical olefin polymerisation pre-catalysts supported by α-diimines incorporating methyl- and 1,8-naphtalenyl substituents at the ligand backbone. The chlorine-substituted backbone of the free ligand [2,6-Me₂C₆H₃NC(Cl)]₂ can be employed in further alkylation reactions to generate new multifunctional ligand prototypes with potential uses as ansa-metallocene/diimines building blocks for catalytic applications of heterobimetallic complexes.     

Switching between penta- and hexacoordination with salen-silicon-complexes

The reaction between phenyltrichlorosilane and the tetradentate ligands o-HO-C₆H₄-C(CH₃)N-(CH₂)_n-NC(CH₃)-o-C₆H₄-OH (n = 2, 3, 4), supported by an amine base, yields pentacoordinate silicon complexes (C₆H₅)Si-[o-O-C₆H₄-C(CH₃)N-(CH₂)_n-N-C(CH₂)-o-C₆H₄-O] with enamine functionalized ligands. This reaction pattern can be transferred onto various ligands of 2-iminomethylphenolate-type. The resulting pentacoordinate silicon complexes react with a variety of Brønsted acids HY to yield hexacoordinate salen silicon complexes (C₆H₅)(Y)Si-[o-O-C₆H₄-C(CH₃)N-(CH₂)_n-NC(CH₃)-o-C₆H₄-O] (Y = benzoate, picrate, 8-oxyquinolinate, 2-oxy-1,4-naphthoquinonate, p-tert-butylphenolate, (5-phenyltetrazol)-2-ide, fluoride, tetrafluoroborate). Hexacoordination of their Si-atoms was confirmed by ²⁹Si NMR spectroscopy and, in some cases, by X-ray crystal structure analysis. Examples for similarities and differences in the coordination behavior of the silicon atom and its heavier congeners (Ge, Sn) in the salen-type coordination sphere as well as data regarding the nucleophilicity of some of these novel enamine complexes are presented.     

Complexation associated rearrangement of iminobiphosphines to diphosphinoamines

The reaction of the iminobiphosphines RNPPh₂-PPh₂, where R = C₆H₄(p-CN), C₆H₄(m-CN), C₆H₄(o-C₆H₅), C₆F₅ or C₆H₄(o-CF₃), with one molecular equivalent of M(cod)Cl₂ (M = Pd or Pt) results in a rearrangement of the NPP unit to the more commonly encountered P-N-P unit, forming mono-chelating complexes of general formula M{RN(PPh₂)₂}Cl₂. The related reaction of the same range of iminobiphosphines with Pt(cod)Cl₂ (but not Pd(cod)Cl₂) in 2:1 ratio affords complexes of general formula [Pt{RN(PPh₂)₂}₂]2Cl. All 15 complexes are isolated in moderate to high yield and they have been fully characterised by spectroscopic methods. Six complexes, viz. [M{C₆H₄(p-CN)N(PPh₂)₂}Cl₂], [M{C₆H₄(m-CN)N(PPh₂)₂}Cl₂] and [M{C₆H₄(o-C₆H₅)N(PPh₂)₂}Cl₂] (M = Pd and Pt), have been characterised in the solid state by single crystal X-ray diffraction analysis.     

Synthesis and characterisation of isomeric cycloaurated complexes derived from the iminophosphorane Ph3PNC(O)Ph

Using different organomercury substrates, two isomeric cycloaurated complexes derived from the stabilised iminophosphorane Ph₃PNC(O)Ph were prepared. Reaction of Ph₃PNC(O)Ph with PhCH₂Mn(CO)₅ gave the manganated precursor (CO)₄Mn(2-C₆H₄C(O)NPPh₃), metallated on the C(O)Ph substituent, which yielded the organomercury complex ClHg(2-C₆H₄C(O)NPPh₃) by reaction with HgCl₂ in methanol. Transmetallation of the mercurated derivative with Me₄N[AuCl₄] gave the cycloaurated iminophosphorane AuCl₂(2-C₆H₄C(O)NPPh₃) with an exo PPh₃ substituent. The endo isomer AuCl₂(2-C₆H₄Ph₂PNC(O)Ph) [aurated on a PPh₃ ring] was obtained by an independent reaction sequence, involving reaction of the diarylmercury precursor Hg(2-C₆H₄P(NC(O)Ph)Ph₂)₂ [prepared from the known compound Hg(2-C₆H₄PPh₂)₂ and PhC(O)N₃] with Me₄N[AuCl₄]. Both of the isomeric iminophosphorane derivatives were structurally characterised, together with the precursors (2-HgClC₆H₄)C(O)NPPh₃ and (CO)₄Mn(2-C₆H₄C(O)NPPh₃). The utility of ³¹P NMR spectroscopy in monitoring reaction chemistry in this system is described.     

Synthesis and structures of bimetallic silicon-containing imido alkylidene complexes of molybdenum Me2Si[CHMo(NAr)(ORF3)2]2 and PhVinSi[CHMo(NAr)(ORF3)2]2

Bimetallic alkylidene complexes of molybdenum (R_F3O)₂(ArN)MoCH-SiMe₂-CHMo(NAr)(OR_F3)₂ (1) and (R_F3O)₂(ArN)MoCH-SiPhVin-CHMo(NAr)(OR_F3)₂ (2) (Ar = 2,6-C₆H₃; R_F3 = CMe₂CF₃) have been prepared by the reactions of vinyl silicon reagents Me₂Si(CHCH₂)₂ and PhSi(CHCH₂)₃ with known alkylidene compound PhMe₂C-CHMo(NAr)(OR_F3)₂. Complexes 1 and 2 were structurally characterized. Ring opening metathesis polymerization (ROMP) of cyclooctene using compounds 1 and 2 as initiators led to the formation of high molecular weight polyoctenamers with predominant trans-units content in the case of 1 and predominant cis-units content in the case of 2.