The structural definition of adducts of stoichiometry MX:dpex (2:3)(∞), M = Cu, Ag, X = simple anion, dpex = Ph2E(CH2)xEPh2, E = P, As

Single crystal X-ray structural characterizations are recorded for a number of adducts of MX:dpex (2:3) stoichiometry (MX = simple univalent copper or silver salt; dpex = Ph₂E(CH₂)_xEPh₂ (E = P, As)). CuX:dppe (2:3) (X = Cl, Br, I, CN) are binuclear [(dppe-P,P′)CuX(P-dppe-P′)CuX(P,P′-dppe)], all centrosymmetric. AgX:dpex (2:3) (dpex = ‘dpae’ (Ph₂As(CH₂)₂AsPh₂), X = Br, F₃CCO₂ (= ‘tfa’), F₃CSO₃ (≡ ‘tfs’); dpex = ‘dpape’ (Ph₂As(CH₂)₂PPh₂), X = CN, SCN, OClO₃) are one-dimensional polymers ?-E′)₁AgX(E-dpex-E′)₂-AgX(E-dpex-E′)₁AgX?, P, As sites scrambled in the latter. AgNO₃:dpam (2:3) is also a one-dimensional polymer, ?AgO·NO·OAg(As-dpam-As)AgO·NO·OAg? (‘dpam’ ≡ Ph₂As(CH₂)₂AsPh₂). AgX:dpae (2:3) (X = I, CN, ClO₄, NO₃) and AgX:dpape (2:3) (X = Br, I, NO₃) are two-dimensional polymers with large 30-membered macrocyclic rings; similar webs are found for dppx ligands in AgOH:dppb (2:3) and AgNCO, Agtfa:dpph (2:3) with 42- and 54-membered rings. Complexes AgX:dpape (1:3) (X = Cl, Br) are defined as mono-nuclear [XAg(Ph₂P(CH₂)₂AsPh₂)₃] arrays, the unidentate ligands predominantly P-bound. Synthetic procedures for the adducts are reported, selected compounds being characterized both in solution (¹H, ³¹P NMR, ESI MS) and in the solid state (IR).     

Synthesis and structural characterization of dinuclear iridium hydrido complex with 3,6-bis(2-pyridyl)tetrazine, [Ir2(H)4(PPh3)4(bptz)](PF6)2 · 4CH2Cl2

Reaction of the precursor Ir complex [Ir(H)₂(PPh₃)₂(Me₂CO)₂]PF₆ with 3,6-bis(2-pyridyl)tetrazine (bptz) in CH₂Cl₂ gave a novel dinuclear Ir hydrido complex [Ir₂(H)₄(PPh₃)₄(bptz)](PF₆)₂ · 4CH₂Cl₂. Crystallographic study described an interesting coordination environment having a π-π interaction and ¹H NMR study showed unique upfield shifts of pyridyl rings that are likely induced by the ring current effect of neighboring PPh₃ ligands.     

Preparation, crystal structure and magnetic property of a binuclear oxalate-bridged iron(III) compound: Fe2(C2O4)Cl4(DMF)4 (DMF = dimethylformamide)

An oxalato-bridged binuclear iron(III) compound, Fe₂(C₂O₄)Cl₄(DMF)₄ (DMF = dimethylformamide), was obtained by electrocrystallization for three weeks at 3.4 V and it displays a strong antiferromagnetic interaction of J = −6.74(4) cm⁻¹.     

Ni[TCNE]2 · zCH2Cl2 (Tc = 13 K) and VxNi1 − x[TCNE]y · zCH2Cl2 solid solution room temperature magnets

Magnetically ordered Ni[TCNE]₂ · zCH₂Cl₂ (T_c = 13 K) is reported for the first time from the reaction of Ni(CO)₄ with tetracyanoethylene (TCNE). A family of new solid solution room temperature magnets of V_xNi_1 − x[TCNE]_y · zCH₂Cl₂ (0 ? x < 1; y ? 2) composition has been characterized by IR spectrometry, elemental analysis, and magnetic measurements (ac and dc susceptibility). Substitution of Ni^II for V^II in V[TCNE]_y · zCH₂Cl₂ does not alter the T_c significantly for x ? 0.05 and does not alter H_cr significantly for x > 0; however, the magnitude of M increases with x, as does the broadness of the peaks in the χ′(T) and χ″(T) ac susceptibilities. Hence, the magnetic properties of the room temperature V[TCNE]_y · zCH₂Cl₂ magnet can be finely tuned via synthetic chemistry methodology, making this material more amenable in future technologies.     

Octahedral rhenium cluster complexes with organic ligands: Synthesis, structure and properties of [Re6Q8(3,5-Me2PzH)6]Br2 · 2(3,5-Me2PzH) (Q = S, Se)

Two new octahedral cluster complexes - [Re₆S₈(3,5-Me₂PzH)₆]Br₂ · 2(3,5-Me₂PzH) (1) and [Re₆Se₈(3,5-Me₂PzH)₆]Br₂ · 2(3,5-Me₂PzH) (2), where 3,5-Me₂PzH is 3,5-dimethylpyrazole, have been synthesized using reaction of rhenium chalcobromide complexes Cs₄[Re₆S₈Br₆] · 2H₂O and Cs₃[Re₆Se₈Br₆] · H₂O, respectively, with molten 3,5-dimethylpyrazole. Both compounds synthesized were characterized by X-ray single-crystal diffraction and chemical analysis, IR and luminescent spectra.     

The structural definition of adducts of stoichiometry AgX:dppf (1:1)(n), X = simple anion, dppf = bis(diphenylphosphino)ferrocene

Single crystal X-ray structural characterizations are recorded for an array of adducts of the form AgX:dppf (1:1)_(n), X = simple (pseudo-)halide or oxy-anion, ‘dppf’ = bis(diphenyl phosphino)ferrocene, for adducts X = Cl (new phase), Br, I, SCN, OCN, CN, NO₃ (new phase), O₂CCH₃, n = 2, the form being dimeric [(dppf-P,P′)Ag(μ-X)₂Ag(P,P′-dppf)], for X = I, SCN, [Ag(μ-X)₂(P-dppf-P′)₂Ag′]; for X = O₂CCF₃, n = ∞, the form is an extended polymer: ?Ag(O · CO · CF₃)(P-dppf-P′)Ag′(O?. A dichloromethane solvate phase of CuI:dppf (1:1)₂ (also centrosymmetric) is also recorded. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR). The topology of the structures in the solid state was found to depend on the nature of the counterion.     

Complexes of the {ReOX2} (X = Cl, Br) core with single amino acid chelate derivatives

The reactions of 1 equiv. of the ligand 3-(ethoxycarbonylmethyl-pyridin-2-ylmethyl-amino)-propionic acid methyl ester (2) with the Re(V) starting materials [ReOX₃(PPh₃)₂] (X = Cl, Br) in refluxing chloroform yielded the Re(V)-oxo dihalide complexes [ReOX₂{(C₅H₄NCH₂)N(CH₂CO₂)(C₂H₄CO₂CH₃)}] (X = Cl, 3; X = Br, 4). The complexes were characterized by elemental analysis, NMR and IR spectroscopy, cyclic voltammetry and X-ray crystallography. Complex 3 displays distorted octahedral coordination geometry with the tridentate ligand coordinating facially to the Re(V) center. The carboxylate oxygen atom occupies an axial site trans to the ReO bond. The two chlorine atoms consequently adopt a cis configuration.     

Preparation, crystal structures and spectroscopic properties of novel [MCl3 − n(P)3 + n] (M = Co, Rh; n = 0, 1, 2 or 3) series of complexes containing tripodal tridentate phosphine, 1,1,1-tris(dimethylphosphinomethyl)ethane

Cobalt(III) and rhodium(III) complexes of the series of [M^IIICl_3 − n(P)_3 + n]ⁿ⁺ (M = Co or Rh; n = 0, 1, 2 or 3) have been prepared with the use of 1,1,1-tris(dimethylphosphinomethyl)ethane (tdmme) and mono- or didentate phosphines. The single-crystal X-ray analyses of both series of complexes revealed that the M-P and M-Cl bond lengths were dependent primarily on the strong trans influence of the phosphines, and secondarily on the steric congestion around the metal center resulting from the coordination of several phosphine groups. In fact, the M-P(tdmme) bonds became longer in the order of [MCl₃(tdmme)] < [MCl₂(tdmme)(PMe₃)]⁺ < [MCl(tdmme)(dmpe)]²⁺ (dmpe = 1,2-bis(dimethylphosphino)ethane) < [M(tdmme)₂]³⁺ for both Co^III and Rh^III series of complexes, while the M-Cl bond lengths were shortened in this order (except for [M(tdmme)₂]³⁺). Such a steric congestion around the metal center can also account for the structural and spectroscopic characteristics of the series of complexes, [MCl(tdmme)(dmpm, dmpe or dmpp)]²⁺ (dmpm = bis(dimethylphosphino)methane, dmpp = 1,3-bis(dimethylphosphino)propane). The X-ray analysis for [CoCl(tdmme)(dmpm or dmpe)](BF₄)₂ showed that all Co-P bonds in the dmpm complex were shorter by 0.03-0.04 Å than those in the dmpe complex. Furthermore, the first d-d transition energy of the Co^III complexes and the ¹J_Rh-P(tdmme) coupling constants observed for the Rh^III complexes indicated an unusual order in the coordination bond strengths of the didentate diphosphines, i.e., dmpm > dmpe > dmpp.     

Synthesis and structural characterization of trans-[Mo2(H2DMepyF)2(CH3CN)4](BF4)6 (HDMepyF=N,N-di(6-methyl-2-pyridyl)formamidine)

Reaction of Mo₂(O₂CCH₃)₂(DMepyF)₂ (HDMepyF=N,N^′-di(6-methyl-2-pyridyl)formamidine) with HBF₄ in CH₂Cl₂/CH₃CN afforded the complex trans-[Mo₂(H₂DMepyF)₂(CH₃CN)₄](BF₄)₆ (1), which crystallized in two forms, trans-[Mo₂(H₂DMepyF)₂(CH₃CN)₄](ax-CH₃CN)₂(BF ₄)₆ · 2CH₃CN (1a), and trans- [Mo₂(H₂DMepyF)₂(CH₃CN)₄](ax-BF₄) ₂(BF₄)₄ · 2CH₃CN (1b). The molecular structures of complexes (1) consist of two quadruply bonded molybdenum atoms, which are spanned by two trans-bridging formamidinate ligands and coordinated by four trans-CH₃CN. Each H₂DMepyF⁺ ligand adopts an s-cis,s-cis- conformation. The difference between 1a and 1b is that complex 1a contains two CH₃CN molecules as axial ligands, while 1b contains two BF₄⁻ anions as axial ligands. Complex 1 is the first dimolybdenum complex containing a pair of trans bridging ligands and two pairs of trans-CH₃CN ligands.     

Novel reactivity aspects of cis-bis(1-alkenyl)platinum(II) compounds of the type Pt(CH2(CH2)nCHCH2)2L2 (where L2 = dppp, dppe, dppm and n = 1, 2)

We describe the synthesis, structure and reactivity of novel bis(1-alkenyl)platinum(II) complexes, Pt[CH₂(CH₂)_nCHCH₂]₂L₂ (where L₂ = dppp, dppe, dppm and n = 1, 2). The stability of the title complexes with the different ligands is discussed. The steric, chelating and electronic properties of the ligands have a significant impact on the structure as well as on the reactivity of the complexes. Novel reactions with elemental sulfur and carbon dioxide are described and discussed.     

Syntheses and structures of adducts of stoichiometry MX:dpex (2:1)(n), M = Cu, Ag, X = (pseudo-) halogen, dppx = Ph2E(CH2)xEPh2, E = P, As

Single crystal X-ray studies have defined the structures of a number of adducts of the form MX:dpex (2:1), M = univalent coinage metal (Cu, Ag), X = (pseudo-)halide, dpex = bis(diphenylpnicogeno)alkane, Ph₂E(CH₂)_xEPh₂, E = P, As, of diverse types, some novel. The adducts of AgCl,Br:dppm and AgNCO:dpem (x = 1) are tetranuclear as is the AgNO₃:dppp (x = 3) array, all derivative of the familiar ‘step’ structure while the combination CuCN:dppm yields a two-dimensional web of twenty-membered macro/metallacycles. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR).     

Electrochemical oxidation of Mo(CO)4(LL) and Mo(CO)3(LL)(CH3CN): Generation, infrared characterization, and reactivity of [Mo(CO)4(LL)] and [Mo(CO)3(LL)(CH3CN)] (LL = 2,2′-bipyridine, 1,10-phenanthroline and related ligands)

Mo(CO)₄(LL) complexes, where LL = polypyridyl ligands such as 2,2′-bipyridine and 1,10-phenanthroline, undergo quasi-reversible, one-electron oxidations in methylene chloride yielding the corresponding radical cations, [Mo(CO)₄(LL)]⁺. These electrogenerated species undergo rapid ligand substitution in the presence of acetonitrile, yielding [Mo(CO)₃(LL)(CH₃CN)]⁺; rate constants for these substitutions were measured using chronocoulometry and were found to be influenced by the steric and electronic properties of the polypyridyl ligands. [Mo(CO)₃(LL)(CH₃CN)]⁺ radical cations, which could also be generated by reversible oxidation of Mo(CO)₃(LL)(CH₃CN) in acetonitrile, can be irreversibly oxidized yielding [Mo(CO)₃(LL)(CH₃CN)₂]²⁺ after coordination by an additional acetonitrile. Infrared spectroelectrochemical experiments indicate the radical cations undergo ligand-induced net disproportionations that follow first-order kinetics in acetonitrile, ultimately yielding the corresponding Mo(CO)₄(LL) and [Mo(CO)₂(LL)(CH₃CN)₃]²⁺ species. Rate constants for the net disproportionation of [Mo(CO)₃(LL)(CH₃CN)]⁺ and the carbonyl substitution reaction of [Mo(CO)₃(LL)(CH₃CN)₂]²⁺ were measured. Thin-layer bulk oxidation studies also provided infrared characterization data of [Mo(CO)₄(ncp)]⁺ (ncp = neocuproine), [Mo(CO)₃(LL)(CH₃CN)]⁺, [Mo(CO)₃(LL)(CH₃CN)₂]²⁺ and [Mo(CO)₂(LL)(CH₃CN)₃]²⁺ complexes.     

Ln2(O2CCH2PO3)2(H2O)3 · H2O (Ln = La, Pr, Nd, Sm): Layered lanthanide phosphonoacetates containing two-dimensional -Ln-O- linkages

Four novel isostructural lanthanide phosphonate compounds with formula Ln₂(O₂CCH₂PO₃)₂(H₂O)₃ · H₂O [Ln = La (1), Pr (2), Nd (3), Sm (4)] have been prepared through hydrothermal reactions of phosphonoacetate acid and lanthanide nitrates. All show layered structures made up of {LnO₉} polyhedra and {CPO₃} tetrahedra with the lattice water molecules locating between the layers. Within the layer, chains of edge-sharing {LnO₉} polyhedra are connected via corner-sharing by phosphonate oxygens forming a two-dimensional -Ln-O- linkage. Thermal analyses and XRD measurements reveal that the framework structures can be maintained up to 400 °C.     

Synthesis and characterization of Pd(II) and Pt(II) complexes with triazolopyrimidine derivatives: The crystal structure of [Pd2L2Cl4] where L = 5,7-dimethyl-1,2,4-triazolo[1,5-a]pyrimidine

The Pd(II) and Pt(II) complexes with triazolopyrimidine C-nucleosides L¹ (5,7-dimethyl-3-(2′,3′,5′-tri-O-benzoyl-β-d-ribofuranosyl-s-triazolo)[4,3-a]pyrimidine), L² (5,7-dimethyl-3-β-d-ribofuranosyl-s-triazolo[4,3-a]pyrimidine) and L³ (5,7-dimethyl[1,5-a]-s-triazolopyrimidine), [Pd(en)(L¹)](NO₃)₂, [Pd(bpy)(L¹)](NO₃)₂, cis-Pd(L³)₂Cl₂, [Pd₂(L³)₂Cl₄] · H₂O, cis-Pd(L²)₂Cl₂ and [Pt₃(L¹)₂Cl₆] were synthesized and characterized by elemental analysis and NMR spectroscopy. The structure of the [Pd₂(L³)₂Cl₄] · H₂O complex was established by X-ray crystallography. The two L³ ligands are found in a head to tail orientation, with a Pd?Pd distance of 3.1254(17) Å. L¹ coordinates to Pd(II) through N8 and N1 forming polymeric structures. L² coordinates to Pd(II) through N8 in acidic solutions (0.1 M HCl) forming complexes of cis-geometry. The Pd(II) coordination to L² does not affect the sugar conformation probably due to the high stability of the C-C glycoside bond.     

Syntheses and structures of heterobimetallic complexes derived from [Ga(edt)2] as a metalloligand (edt = SC2H4S): Potential precursors for ternary materials MGaS2 (M = Cu or Ag)

Metathesis reaction between equimolar amount of [Et₄N][GaCl₄] and Na₂edt in methanol resulted in the formation of the dichloro complex [Et₄N][Ga(edt)Cl₂] (1), whereas reaction of [Et₄N][GaCl₄] with two equivalents of Na₂edt in methanol gave the complex [Et₄N][Ga(edt)₂] (2) which can act as a metalloligand. Treatment of 2 with M(PPh₃)₂NO₃ in DMF/CH₂Cl₂ afforded the heterobimetallic complexes [Ga(edt)₂M-(PPh₃)₂] (M = Cu 3, Ag 4) in moderate yields. The structures of 1-4 were determined by single-crystal X-ray diffraction analyses. Both [Ga(edt)Cl₂]⁻ and [Ga(edt)₂]⁻ anions have a distorted tetrahedral geometry. The former consists of one five-membered ring formed by chelating dithiolate and two terminal chloride atoms while the latter consists of two five-membered rings formed by two the chelating dithiolates. Complexes 3 and 4 consist of metalloligand [Ga(edt)₂]⁻ anion chelated to [M(PPh₃)₂]⁺via the sulfur atoms. Both tetrahedrally coordinated Ga and Cu(Ag) atoms are bridged by two sulfur atoms, forming a planar “GaS₂M” (M = Cu, Ag) core. Thermogravimetry analysis revealed that heterobimetallic complexes 3 and 4 decomposed to give the corresponding ternary metal sulfide materials.     

Analysis of the main structural trends for biscyclometalated dinuclear rhodium compounds of general formula Rh2(O2CR)2(PC)2 · 2H2O

A new series of biscyclometalated dinuclear rhodium (II) compounds with the general formula Rh₂(O₂CR)₂(PC)₂ · 2H₂O, being PC = (C₆H₄)P(C₆H₅)₂, R = CH₃ (1 · 2H₂O), PC = [(p-CH₃ OC₆H₃)P(p-CH₃ OC₆H₄)₂], R = CF₃ (2 · 2H₂O), PC = (C₆H₄)P[CH(CH₃)₂]₂, R = CH₃ (3 · 2H₂O) and PC = (C₆H₄)P(C₆H₅)₂, R = C₆F₅ (4 · 2H₂O) has been obtained. The crystal structures for these compounds have been determined by X-ray diffraction and the main structural trends, bond lengths, bond angles and torsion angles have been analyzed, and have also been compared with the structural parameters for different analogous complexes described previously in the literature.     

Syntheses, spectroscopic and structural characterization of some (solvated) binuclear adducts of the form Ag(oxyanion):dpem(:S) (1:1(:x))2 (oxyanion = ClO4, F3CCO2, F3CSO3; dpem = Ph2E(CH2)EPh2 (E = P, As))

Syntheses, spectroscopic (IR, NMR and ESI MS) and single crystal X-ray structural characterizations are reported for a wide variety of adducts of Ag(oxyanion):dpem(:S) (1:1(:n))₂ (oxyanion = ClO₄, F₃CCO₂ (tfa) F₃CSO₃ (tfs); dpem = Ph₂E(CH₂)EPh₂) stoichiometry among which the basic Ag(Ph₂E(CH₂)EPh₂)₂Ag core is diversely perturbed by interactions with anions and solvent molecules. ESI MS and ³¹P NMR spectroscopy indicated that dinuclear species also exist in solution.     

Complexes of N-thiophosphorylthioureas RNHC(S)NHP(S)(OiPr)2 (HL) (R = pyridin-2-yl, pyridin-3-yl, 6-amino-pyridin-2-yl) with copper(I): Crystal structures of Cu(PPh3)nL (n = 1, 2)

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RNHC(S)NHP(S)(OiPr)₂ [R = pyridin-2-yl (HL^a), pyridin-3-yl (HL^b), 6-amino-pyridin-2-yl (HL^c)] with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to mononuclear [Cu(PPh₃)₂L^a,b-S,S′] (1, 2) and [Cu(PPh₃)L^c-S,S′] (3) complexes. Using copper(I) iodide instead of Cu(PPh₃)₃I, polynuclear complexes [Cu_n(L-S,S′)_n] (4-6) were obtained. The structures of these compounds were investigated by IR, ¹H, ³¹P{¹H} NMR spectroscopy, ES-MS and elemental analyses. The crystal structures of Cu(PPh₃)₂L^b (2) and Cu(PPh₃)L^c (3) were determined by single-crystal X-ray diffraction.     

Vibrational and structural mapping of [Os(bpy)3] and [Os(phen)3]

Structural changes between [Os^IIL₃]²⁺ and [Os^IIIL₃]³⁺ (L: 2,2′-bipyridine; 1,10-phenanthroline) and molecular and electronic structures of the Os^III complexes [Os^III(bpy)₃]³⁺ and [Os^III(phen)₃]³⁺ are discussed in this paper. Mid-infrared spectra in the ν(bpy) and ν(phen) ring stretching region for [Os^II(bpy)₃](PF₆)₂, [Os^III(bpy)₃](PF₆)₃, [Os^II(phen)₃](PF₆)₂, and [Os^III(phen)₃](PF₆)₃ are compared, as are X-ray crystal structures. Absorption spectra in the UV region for [Os^III(bpy)₃](PF₆)₃ and [Os^III(phen)₃](PF₆)₃ are dominated by very intense absorptions (ε = 40 000-50 000 M⁻¹ cm⁻¹) due to bpy and phen intra-ligand π → π^∗ transitions. In the visible region, relatively narrow bands with vibronic progressions of ∼1500 cm⁻¹ appear, and have been assigned to bpy or phen-based, spin-orbit coupling enhanced, ¹π → ³π^∗ electronic transitions. Also present in the visible region are ligand-to-metal charge transfer bands (LMCT) arising from π(bpy) → t_2g(Os^III) or π(phen) → t_2g(Os^III) transitions. In the near infrared, two broad absorption features appear for oxidized forms [Os^III(bpy)₃](PF₆)₃ and [Os^III(phen)₃](PF₆)₃ arising from dπ-dπ interconfigurational bands characteristic of dπ⁵Os^III. They are observed at 4580 and 5090 cm⁻¹ for [Os^III(bpy)₃](PF₆)₃ and at 4400 and 4990 cm⁻¹ for [Os^III(phen)₃](PF₆)₃. The bpy and phen infrared vibrational bands shift to higher energy upon oxidation of Os(II) to Os(III). In the cation structure in [Os^III(bpy)₃](PF₆)₃, the Os^III atom resides at a distorted octahedral site, as judged by ∠N-Os-N, which varies from 78.78(22)° to 96.61(22)°. Os-N bond lengths are also in general longer for [Os^III(bpy)₃](PF₆)₃ compared to [Os^II(bpy)₃](PF₆)₂ (0.010 Å), and for [Os^III(phen)₃](PF₆)₃ compared to [Os^II(phen)₃](PF₆)₂ (0.014 Å). Structural changes in the ligands between oxidation states are discussed as originating from a combination of dπ(Os^II) → π^∗ (bpy or phen) backbonding and charge redistribution on the ligands as calculated by natural population analysis.     

Two-dimensional oxides constructed from octamolybdate clusters and M/tetrapyridylpyrazine subunits (M = Co, Ni: n = 2; M = Cu: n = 1)

The hydrothermal reactions of MoO₃, tetra-2-pyridylpyrazine (tpyprz) and M(CH₃CO₂)₂ · 2H₂O (M = Co, Ni) yielded the two-dimensional oxides [M₂(tpyprz)(H₂O)₂Mo₈O₂₆] · xH₂O [M = Co, x = 1.8 (1); M = Ni, x = 0.6 (2)]. However, the reaction of (NH₄)₆Mo₇O₂₄ · 4H₂O, tpyprz and Cu(CH₃CO₂)₂ · H₂O produced [{Cu₂(tpyprz)}₂Mo₈O₂₆] · 2H₂O (3 · 2H₂O). The isomorphous structures of 1 and 2 are constructed from clusters linked through {M₂(tpyprz)(H₂O)₂}⁴⁺ subunits into two-dimensional networks. While the structure of 3 is also two-dimensional, the molybdate building block is present as the δ-isomer and the secondary-metal/ligand component consists of a one-dimensional chain. The structure of 3 is compared to that of the previously reported three-dimensional material [{Cu₂(tpyprz)}₂Mo₈O₂₆] · 7H₂O which contains clusters and structurally distinct chains.