How to Report Record Open‐Circuit Voltages in Lead‐Halide Perovskite Solar Cells

Open‐circuit voltages of lead‐halide perovskite solar cells are improving rapidly and are approaching the thermodynamic limit. Since many different perovskite compositions with different bandgap energies are actively being investigated, it is not straightforward to compare the open‐circuit voltages between these devices as long as a consistent method of referencing is missing. For the purpose of comparing open‐circuit voltages and identifying outstanding values, it is imperative to use a unique, generally accepted way of calculating the thermodynamic limit, which is currently not the case. Here a meta‐analysis of methods to determine the bandgap and a radiative limit for open‐circuit voltage is presented. The differences between the methods are analyzed and an easily applicable approach based on the solar cell quantum efficiency as a general reference is proposed.     

Disorder‐Induced Open‐Circuit Voltage Losses in Organic Solar Cells During Photoinduced Burn‐In

The photoinduced open‐circuit voltage (V_oc) loss commonly observed in bulk heterojunction organic solar cells made from amorphous polymers is investigated. It is observed that the total charge carrier density and, importantly, the recombination dynamics are unchanged by photoinduced burn‐in. Charge extraction is used to monitor changes in the density of states (DOS) during degradation of the solar cells, and a broadening over time is observed. It is proposed that the V_oc losses observed during burn‐in are caused by a redistribution of charge carriers in a broader DOS. The temperature and light intensity dependence of the V_oc losses can be described with an analytical model that contains the amount of disorder broadening in a Gaussian DOS as the only fit parameter. Finally, the V_oc loss in solar cells made from amorphous and crystalline polymers is compared and an increased stability observed in crystalline polymer solar cells is investigated. It is found that solar cells made from crystalline materials have a considerably higher charge carrier density than those with amorphous materials. The effects of a DOS broadening upon aging are suppressed in solar cells with crystalline materials due to their higher carrier density, making crystalline materials more stable against V_oc losses during burn‐in.     

Molecular Understanding of the Open‐Circuit Voltage of Polymer:Fullerene Solar Cells

The origin of open‐circuit voltage (V_OC) was studied for polymer solar cells based on a blend of poly(3‐hexylthiophene) (P3HT) and seven fullerene derivatives with different LUMO energy levels and side chains. The temperature dependence of J–V characteristics was analyzed by an equivalent circuit model. As a result, V_OC increased with the decrease in the saturation current density J₀ of the device. Furthermore, J₀ was dependent on the activation energy E_A for J₀, which is related to the HOMO–LUMO energy gap between P3HT and fullerene. Interestingly, the pre‐exponential term J₀₀ for J₀ was larger for pristine fullerenes than for substituted fullerene derivatives, suggesting that the electronic coupling between molecules also has substantial impact on V_OC. This is probably because the recombination is non‐diffusion‐lmilited reaction depending on electron transfer at the P3HT/fullerene interface. In summary, the origin of V_OC is ascribed not only to the relative HOMO–LUMO energy gap but also to the electronic couplings between fullerene/fullerene and polymer/fullerene.     

Impact of Triplet Excited States on the Open‐Circuit Voltage of Organic Solar Cells

The best organic solar cells (OSCs) achieve comparable peak external quantum efficiencies and fill factors as conventional photovoltaic devices. However, their voltage losses are much higher, in particular those due to nonradiative recombination. To investigate the possible role of triplet states on the donor or acceptor materials in this process, model systems comprising Zn‐ and Cu‐phthalocyanine (Pc), as well as fluorinated versions of these donors, combined with C₆₀ as acceptor are studied. Fluorination allows tuning the energy level alignment between the lowest energy triplet state (T₁) and the charge‐transfer (CT) state, while the replacement of Zn by Cu as the central metal in the Pcs leads to a largely enhanced spin–orbit coupling. Only in the latter case, a substantial influence of the triplet state on the nonradiative voltage losses is observed. In contrast, it is found that for a large series of typical OSC materials, the relative energy level alignment between T₁ and the CT state does not substantially affect nonradiative voltage losses.     

Thieno[3,4‐c]Pyrrole‐4,6‐Dione‐Based Polymer Acceptors for High Open‐Circuit Voltage All‐Polymer Solar Cells

While polymer acceptors are promising fullerene alternatives in the fabrication of efficient bulk heterojunction (BHJ) solar cells, the range of efficient material systems relevant to the “all‐polymer” BHJ concept remains narrow, and currently limits the perspectives to meet the 10% efficiency threshold in all‐polymer solar cells. This report examines two polymer acceptor analogs composed of thieno[3,4‐c ]pyrrole‐4,6‐dione (TPD) and 3,4‐difluorothiophene ([2F]T) motifs, and their BHJ solar cell performance pattern with a low‐bandgap polymer donor commonly used with fullerenes (PBDT‐TS1; taken as a model system). In this material set, the introduction of a third electron‐deficient motif, namely 2,1,3‐benzothiadiazole (BT), is shown to (i) significantly narrow the optical gap (E _opt) of the corresponding polymer (by ≈0.2 eV) and (ii) improve the electron mobility of the polymer by over two orders of magnitude in BHJ solar cells. In turn, the narrow‐gap P2TPDBT[2F]T analog (E _opt = 1.7 eV) used as fullerene alternative yields high open‐circuit voltages (V _OC) of ≈1.0 V, notable short‐circuit current values (J _SC) of ≈11.0 mA cm⁻², and power conversion efficiencies (PCEs) nearing 5% in all‐polymer BHJ solar cells. P2TPDBT[2F]T paves the way to a new, promising class of polymer acceptor candidates.     

Terpene Conjugates of the Nigella sativa Seed‐Oil Constituent Thymoquinone with Enhanced Efficacy in Cancer Cells

Thymoquinone (TQ; 1 ) is a weak anticancer constituent of black seed oil. Derivatives bearing terpene‐terminated 6‐alkyl residues were tested in cells of human HL‐60 leukemia, 518A2 melanoma, multidrug‐resistant KB‐V1/Vbl cervix, and MCF‐7/Topo breast carcinomas, as well as in non‐malignant human foreskin fibroblasts. Derivatives with a short four‐atom spacer between quinone and cyclic monoterpene moieties were more antiproliferative than analogues with longer spacers. 6‐(Menthoxybutyryl)thymoquinone ( 3a ) exhibited single‐digit micromolar IC₅₀ (72 h) values in all four cell lines. It was seven times more active than TQ ( 1 ) in 518A2 melanoma cells and four times in KB‐V1/Vbl cervix carcinoma cells, while only half as toxic in the fibroblasts. Compound 3a was also not a substrate for the P‐gp and BCRP drug transporters of the resistant cancer cells. The caryophyllyl and germacryl conjugates 3e and 3f specifically inhibited the growth of the resistant MCF‐7 breast carcinoma cells. Conjugation of TQ with the triterpene betulinic acid via the OH group as in 3g led to a loss in activity, while conjugation via the carboxylic acid afforded compound 4 with nanomolar IC₅₀ (72 h) activity against HL‐60 cells. All anticancer‐active derivatives of TQ ( 1 ) induced apoptosis associated with DNA laddering, a decrease in mitochondrial membrane potential and a slight increase in reactive oxygen species.     

Record Open‐Circuit Voltage Wide‐Bandgap Perovskite Solar Cells Utilizing 2D/3D Perovskite Heterostructure

In this work, the authors realize stable and highly efficient wide‐bandgap perovskite solar cells that promise high power conversion efficiencies (PCE) and are likely to play a key role in next generation multi‐junction photovoltaics (PV). This work reports on wide‐bandgap (≈1.72 eV) perovskite solar cells exhibiting stable PCEs of up to 19.4% and a remarkably high open‐circuit voltage (V_OC) of 1.31 V. The V_OC‐to‐bandgap ratio is the highest reported for wide‐bandgap organic?inorganic hybrid perovskite solar cells and the V_OC also exceeds 90% of the theoretical maximum, defined by the Shockley–Queisser limit. This advance is based on creating a hybrid 2D/3D perovskite heterostructure. By spin coating n‐butylammonium bromide on the double‐cation perovskite absorber layer, a thin 2D Ruddlesden–Popper perovskite layer of intermediate phases is formed, which mitigates nonradiative recombination in the perovskite absorber layer. As a result, V_OC is enhanced by 80 mV.     

Three‐Dimensional Nanostructured Indium‐Tin‐Oxide Electrodes for Enhanced Performance of Bulk Heterojunction Organic Solar Cells

A three‐dimensional indium tin oxide (ITO) nanohelix (NH) array is presented as a multifunctional electrode for bulk heterojunction organic solar cells for simultaneously improving light absorption and charge transport from the active region to the anode. It is shown that the ITO NH array, which is easily fabricated using an oblique‐angle‐deposition technique, acts as an effective antireflection coating as well as a light‐scattering layer, resulting in much enhanced light harvesting. Furthermore, the larger interfacial area between the electrode and the active layer, together with the enhanced carrier mobility through highly conductive ITO NH facilitate transport and collection of charge carriers. The optical and electrical improvements enabled by the ITO NH electrode result in a 10% increase in short‐circuit current density and power‐conversion efficiency of the solar cells.     

Hot‐Substrate Deposition of Hole‐ and Electron‐Transport Layers for Enhanced Performance in Perovskite Solar Cells

Charge transport layers play an important role in determining the power conversion efficiencies (PCEs) of perovskite solar cells (PSCs). However, it has proven challenging to produce thin and compact charge transport layers via solution processing techniques. Herein, a hot substrate deposition method capable of improving the morphology of high‐coverage hole‐transport layers (HTLs) and electron‐transport layers (ETLs) is reported. PSC devices using HTLs deposited on a hot substrate show improvement in the open‐circuit voltage (V_oc) from 1.041 to 1.070 V and the PCE from 17.00% to 18.01%. The overall device performance is then further enhanced with the hot substrate deposition of ETLs as the V_oc and PCE reach 1.105 V and 19.16%, respectively. The improved performance can be explained by the decreased current leakage and series resistance, which are present in PSCs with rough and discontinuous HTLs and ETLs.     

Oxygenated CdS Buffer Layers Enabling High Open‐Circuit Voltages in Earth‐Abundant Cu2BaSnS4 Thin‐Film Solar Cells

Earth‐abundant Cu₂BaSnS₄ (CBTS) thin films exhibit a wide bandgap of 2.04–2.07 eV, a high absorption coefficient > 10⁴ cm^?1, and a p‐type conductivity, suitable as a top‐cell absorber in tandem solar cell devices. In this work, sputtered oxygenated CdS (CdS:O) buffer layers are demonstrated to create a good p–n diode with CBTS and enable high open‐circuit voltages of 0.9–1.1 V by minimizing interface recombination. The best power conversion efficiency of 2.03% is reached under AM 1.5G illumination based on the configuration of fluorine‐doped SnO₂ (back contact)/CBTS/CdS:O/CdS/ZnO/aluminum‐doped ZnO (front contact).     

Achieving High Open‐Circuit Voltages up to 1.57 V in Hole‐Transport‐Material‐Free MAPbBr3 Solar Cells with Carbon Electrodes

An open‐circuit voltage (V_oc) of 1.57 V under simulated AM1.5 sunlight in planar MAPbBr₃ solar cells with carbon (graphite) electrodes is obtained. The hole‐transport‐material‐free MAPbBr₃ solar cells with the normal architecture (FTO/TiO₂/MAPbBr₃/carbon) show little hysteresis during current–voltage sweep under simulated AM1.5 sunlight. A solar‐to‐electricity power conversion efficiency of 8.70% is achieved with the champion device. Accordingly, it is proposed that the carbon electrodes are effective to extract photogenerated holes in MAPbBr₃ solar cells, and the industry‐applicable carbon electrodes will not limit the performance of bromide‐based perovskite solar cells. Based on the analysis of the band alignment, it is found that the voltage (energy) loss across the interface between MAPbBr₃ and carbon is very small compared to the offset between the valence band maximum of MAPbBr₃ and the work function of graphite. This finding implies either Fermi level pinning or highly doped region inside MAPbBr₃ layer exists. The band‐edge electroluminescence spectra of MAPbBr₃ from the solar cells further support no back‐transfer pathways of electrons across the MAPbBr₃/TiO₂ interface.     

On the Relation between the Open‐Circuit Voltage and Quasi‐Fermi Level Splitting in Efficient Perovskite Solar Cells

Today's perovskite solar cells (PSCs) are limited mainly by their open‐circuit voltage (V_OC) due to nonradiative recombination. Therefore, a comprehensive understanding of the relevant recombination pathways is needed. Here, intensity‐dependent measurements of the quasi‐Fermi level splitting (QFLS) and of the V_OC on the very same devices, including pin‐type PSCs with efficiencies above 20%, are performed. It is found that the QFLS in the perovskite lies significantly below its radiative limit for all intensities but also that the V_OC is generally lower than the QFLS, violating one main assumption of the Shockley‐Queisser theory. This has far‐reaching implications for the applicability of some well‐established techniques, which use the V_OC as a measure of the carrier densities in the absorber. By performing drift‐diffusion simulations, the intensity dependence of the QFLS, the QFLS‐V_OC offset and the ideality factor are consistently explained by trap‐assisted recombination and energetic misalignment at the interfaces. Additionally, it is found that the saturation of the V_OC at high intensities is caused by insufficient contact selectivity while heating effects are of minor importance. It is concluded that the analysis of the V_OC does not provide reliable conclusions of the recombination pathways and that the knowledge of the QFLS‐V_OC relation is of great importance.     

Enhanced Near‐Bandgap Response in InP Nanopillar Solar Cells

The effect of nanopillar texturing on the performance of InP solar cells is investigated. Maskless, lithography‐free reactive ion etching of InP nanopillars improves the open‐circuit voltage, reduces reflectance over a broad spectral range, and enhances the near‐bandgap response compared to a flat, non‐textured cell with comparable reflectance in the infrared. Electron‐beam induced current measurements indicate an increased effective minority carrier collection length. The response at short wavelengths decreases due to the formation of a defective surface layer with strong non‐radiative recombination. Plasma oxidation and wet etching partially restore the blue response resulting in a power conversion efficiency of 14.4%.     

Device Architectures for Enhanced Photon Recycling in Thin‐Film Multijunction Solar Cells

Multijunction (MJ) solar cells have the potential to operate across the entire solar spectrum, for ultrahigh efficiencies in light to electricity conversion. Here an MJ cell architecture is presented that offers enhanced capabilities in photon recycling and photon extraction, compared to those of conventional devices. Ideally, each layer of a MJ cell should recycle and re‐emit its own luminescence to achieve the maximum possible voltage. This design involves materials with low refractive indices as interfaces between sub‐cells in the MJ structure. Experiments demonstrate that thin‐film GaAs devices printed on low‐index substrates exhibit improved photon recycling, leading to increased open‐circuit voltages (V _oc), consistent with theoretical predictions. Additional systematic studies reveal important considerations in the thermal behavior of these structures under highly concentrated illumination. Particularly when combined with other optical elements such as anti‐reflective coatings, these architectures represent important aspects of design for solar cells that approach thermodynamic efficiency limits for full spectrum operation.