Single- and double-SSR primer combined analyses in rice

Polymerase chain reaction (PCR) is the foundation of SSR molecular marker technology. We used sib rice varieties J518, XD1 and SD23 as experimental materials, selecting 30 pairs of SSR primers, including RM127, RM337 and RM5172, covering the rice genome, and performed single- and double-SSR primer combined analyses. We found that under the same PCR system and conditions, a single primer of the SSR primer pairs could amplify the same fragments as double primers do. The sequencing results demonstrated that some amplified fragments that we previously believed to come from double primers were actually produced by a single primer. The use of this kind of primer, such as the RM127 primer pair, for marker-assisted breeding will therefore be misleading. Additionally, using the same PCR system and conditions, some single primers that are part of SSR primer pairs can amplify many more specific fragments than double-SSR primers. For instance, in the case of the RM5172 primer pair, a single primer P1 amplified approximately three times the number of fragments as the double primer. This information can contribute to research on genetic diversity of species, understanding of genetic relationships and identification of germplasm resources. Accordingly, combined analyses of single- and double-primer amplification products not only can remove single-primer amplification fragments and false-positives from double-primer amplification products in order to improve test accuracy, but also can facilitate research on genetic diversity, exploration of phylogenetic relationships and identification of germplasm resources. We define this method as "single- and double-SSR primer combined analyses".     

Deconstructing the Polymerase Chain Reaction: Understanding and Correcting Bias Associated with Primer Degeneracies and Primer-Template Mismatches

The polymerase chain reaction (PCR) is sensitive to mismatches between primer and template, and mismatches can lead to inefficient amplification of targeted regions of DNA template. In PCRs in which a degenerate primer pool is employed, each primer can behave differently. Therefore, inefficiencies due to different primer melting temperatures within a degenerate primer pool, in addition to mismatches between primer binding sites and primers, can lead to a distortion of the true relative abundance of targets in the original DNA pool. A theoretical analysis indicated that a combination of primer-template and primer-amplicon interactions during PCR cycles 3–12 is potentially responsible for this distortion. To test this hypothesis, we developed a novel amplification strategy, entitled “Polymerase-exonuclease (PEX) PCR”, in which primer-template interactions and primer-amplicon interactions are separated. The PEX PCR method substantially and significantly improved the evenness of recovery of sequences from a mock community of known composition, and allowed for amplification of templates with introduced mismatches near the 3’ end of the primer annealing sites. When the PEX PCR method was applied to genomic DNA extracted from complex environmental samples, a significant shift in the observed microbial community was detected. Furthermore, the PEX PCR method provides a mechanism to identify which primers in a primer pool are annealing to target gDNA. Primer utilization patterns revealed that at high annealing temperatures in the PEX PCR method, perfect match annealing predominates, while at lower annealing temperatures, primers with up to four mismatches with templates can contribute substantially to amplification. The PEX PCR method is simple to perform, is limited to PCR mixes and a single exonuclease step which can be performed without reaction cleanup, and is recommended for reactions in which degenerate primer pools are used or when mismatches between primers and template are possible.     

A New PCR Method: One Primer Amplification of PCR-CTPP Products

Polymerase chain reaction with confronting two-pair primers (PCR-CTPP) is a convenient method for genotyping single nucleotide polymorphisms, saving time, and costs. It uses four primers for PCR; F1 and R1 for one allele, and F2 and R2 for the other allele, by which three different sizes of DNA are amplified; between F1 and R1, between F2 and R2, and between F1 and R2. To date, we have applied PCR-CTPP successfully for genotyping more than 60 polymorphisms. However, it is not rare that PCR does not produce balanced amplification of allele specific bands. Accordingly, the method was modified by attaching a common sequence at the 5' end of two-pair primers and adding another primer with the common sequence in PCR, in total five different primers in a tube for PCR. The modification allowed one primer amplification for the products of initial PCR with confronting two-pair primers, named as one primer amplification of PCR-CTPP products (OPA-CTPP). This article demonstrates an example for an A/G polymorphism of paraoxonase 1 (PON1) Gln192Arg (rs662). PCR-CTPP failed clear genotyping for the polymorphism, while OPA-CTPP successfully produced PCR products corresponding to the allele. The present example indicated that the OPA-CTPP would be useful in the case that PCR-CTPP failed to produce balanced PCR products specific to each allele.     

DNA analysis with multiplex microarray-enhanced PCR

We have developed a highly sensitive method for DNA analysis on 3D gel element microarrays, a technique we call multiplex microarray-enhanced PCR (MME-PCR). Two amplification strategies are carried out simultaneously in the reaction chamber: on or within gel elements, and in bulk solution over the gel element array. MME-PCR is initiated by multiple complex primers containing gene-specific, forward and reverse, sequences appended to the 3′ end of a universal amplification primer. The complex primer pair is covalently tethered through its 5′ end to the polyacryl- amide backbone. In the bulk solution above the gel element array, a single pair of unattached universal primers simultaneously directs pseudo-monoplex PCR of all targets according to normal solution-phase PCR. The presence of a single universal PCR primer pair in solution accelerates amplification within gel elements and eliminates the problem of primer interference that is common to conventional multiplex PCR. We show 10⁶-fold amplification of targeted DNA after 50 cycles with average amplification efficiency 1.34 per cycle, and demonstrate specific on-chip amplification of six genes in Bacillus subtilis. All six genes were detected at 4.5 pg of bacterial genomic DNA (equivalent to 10³ genomes) in 60 independent amplification reactions performed simultaneously in single reaction chamber.     

Primer design versus PCR bias in methylation independent PCR amplifications

Many protocols in methylation studies utilize one primer set to generate a PCR product from bisulfite modified template regardless of its methylation status (methylation independent amplification MIP). However, proportional amplification of methylated and unmethylated alleles is hard to achieve due to PCR bias favoring amplification of unmethylated relatively GC poor sequence. Two primer design systems have been proposed to overcome PCR bias in methylation independent amplifications. The first advises against including any CpG dinucleoteides into the primer sequence (CpG-free primers) and the second, recently published by us, is based on inclusion of a limited number of CpG sites into the primer sequence. Here we used the Methylation Sensitive High Resolution Melting (MS-HRM) technology to investigate the ability of primers designed according to both of the above mentioned primer design systems to proportionally amplify methylated and unmethylated templates. Ten “CpG-free” primer pairs and twenty primers containing limited number of CpGs were tested. In reconstruction experiments the “CpG-free” primers showed primer specific sensitivity and allowed us to detect methylation levels in the range from 5 to 50%. Whereas while using primers containing limited number of CpG sites we were able to consistently detect 1–0.1% methylation levels and effectively control PCR amplification bias. In conclusion, the primers with limited number of CpG sites are able to effectively reverse PCR bias and therefore detect methylated templates with significantly higher sensitivity than CpG free primers.     

Simultaneous PCR Detection of the Two Major Bacterial Pathogens of Geranium

Xanthomonas campestris pv. pelargonii ( Xcp ) and Ralstonia solanacearum ( Rs ) are the two most important bacterial pathogens of commercially cultivated geraniums ( Pelargonium spp.), both causing bacterial wilt and leaf spot. Asymptomatic infections are important reservoirs of infections in commercial growing facilities. Our objective was to design a multiplex PCR (Polymerase Chain Reaction) assay to detect infection by either or both of these pathogens. We used a previously characterized PCR primer pair for Xcp that amplifies a region of 200 bp. In addition, we designed a new primer pair specific for Rs that amplifies a region of 822 bp. With these two primer pairs, we could detect either or both pathogens. As geranium tissue extracts frequently contain inhibitors of the PCR process, a negative PCR could result from either an accurate indication that the plant was pathogen-free or from a false negative assay. We therefore designed `amplification competence' primers, targeting a portion of the geranium 18 s rRNA gene, and generating a 494-bp amplification product that confirms amplification competence and validates a negative assay result. Thus, the triple primer pair multiplex PCR screens for the two most important bacterial pathogens of geraniums simultaneously confirms amplification competence for each geranium sample.     

A simple and efficient method to determine the terminal sequences of restriction fragments containing known sequences.

We present an improvement of the inverse PCR method for the determination of end sequences of restriction fragments containing unknown DNA sequences flanked by known segments. In this approach, a short "bridge" DNA is inserted during the self-ligation step of the inverse PCR technique. This bridge DNA acts as primer annealing sites for amplification and subsequent direct sequencing. Successive PCR amplifications enable selective amplification of the unknown sequences from a complex mixture. Unlike previously described methods, our method does not require special materials, such as synthetic adapters or biotinylated primers that must be prepared each time to adapt the target. Furthermore, no complex steps such as dephosphorylation or purification are needed. Our method can save time and reduce the cost of cloning unknown sequences; it is ideal for routine, rapid gene walking. We applied this method to a GC-rich bacterial genome and succeeded in determining the end sequences of a 4.5-kb fragment.     

Multilocus markers for mouse genome analysis: PCR amplification based on single primers of arbitrary nucleotide sequence

Polymerase chain reaction (PCR) based on single primers of arbitrary nucleotide sequence provides a powerful marker system for genome analysis because each primer amplifies multiple products, and cloning, sequencing, and hybridization are not required. We have evaluated this typing system for the mouse by identifying optimal PCR conditions; characterizing effects of GC content, primer length, and multiplexed primers; demonstrating considerable variation among a panel of inbred strains; and establishing linkage for several products. Mg²⁺, primer, template, and annealing conditions were identified that optimized the number and resolution of amplified products. Primers with 40% GC content failed to amplify products readily, primers with 50% GC content resulted in reasonable amplification, and primers with 60% GC content gave the largest number of well-resolved products. Longer primers did not necessarily amplify more products than shorter primers of the same proportional GC content. Multiplexed primers yielded more products than either primer alone and usually revealed novel variants. A strain survey showed that most strains could be readily distinguished with a modest number of primers. Finally, linkage for seven products was established on five chromosomes. These characteristics establish single primer PCR as a powerful method for mouse genome analysis.     

Single nucleotide polymorphism genotyping using allele-specific PCR and fluorescence melting curves

We present a PCR method for identification of single nucleotide polymorphisms (SNPs), using allele-specific primers designed for selective amplification of each allele. Matching the SNP at the 3' end of the forward or reverse primer, and additionally incorporating a 3' mismatch to prevent amplification of the incorrect allele, results in selectivity of the allele-specific primers. DNA melting analysis with fluorescent SYBR Green affords detection of the PCR products. By incorporating a GC-rich sequence into one of the two allele-specific primers to increase the melting temperature, both alleles can be measured simultaneously at their respective melting temperatures. Applying the DNA melting analysis to SNPs in ApoE and ABCA1 yielded results identical to those obtained with other genotyping methods. This provides a cost-effective, high-throughput method for amplification and scoring of SNPs.     

Isolation of segments of homologous genes with only one conserved amino acid region via PCR

We present a method which allows the isolation of fragments from genes coding for homologous proteins via PCR when only one block of conserved amino acids is available. Sets of degenerated primers are defined by reverse translation of the conserved amino acids such that each set contains not more than 128 different sequences. The second primer binding site is provided by a special cassette that is designed such that it does not allow binding of the second primer prior to being copied by DNA synthesis. The cassette is ligated to partially-digested chromosomal DNA. The second primer is biotinylated to allow elimination of PCR products carrying degenerated primers on both sides via streptavidin binding. Fragments obtained after amplification and enrichment are cloned and sequenced. The feasibility of this method was demonstrated in a model experiment, where degenerated primers were deduced from six conserved amino acids within the family of homologs to the Escherichia coli Vsr protein.     

Universal primers for fluorescent labelling of PCR fragments--an efficient and cost-effective approach to genotyping by fluorescence

Directly labelling locus‐specific primers for microsatellite analysis is expensive and a common limitation to small‐budget molecular ecology projects. More cost‐effective end‐labelling of PCR products can be achieved through a three primer PCR approach, involving a fluorescently labelled universal primer in combination with modified locus‐specific primers with 5′ universal primer sequence tails. This technique has been widely used but has been limited largely due to a lack of available universal primers suitable for co‐amplifying large numbers of size overlapping loci and without requiring locus‐specific PCR conditions to be modified. In this study, we report a suite of four high‐performance universal primers that can be employed in a three primer PCR approach for efficient and cost‐effective fluorescent end‐labelling of PCR fragments. Amplification efficiency is maximized owing to high universal primer Tm values (approximately 60+ °C) that enhance primer versatility and enable higher annealing temperatures to be employed compared with commonly used universal primers such as M13. We demonstrate that these universal primers can be combined with multiple fluorophores to co‐amplify multiple loci efficiently via multiplex PCR. This method provides a level of multiplexing and PCR efficiency similar to microsatellite fluorescent detection assays using directly labelled primers while dramatically reducing project costs. Primer performance is tested using several alternative PCR strategies that involve both single and multiple fluorophores in single and multiplex PCR across a wide range of taxa.     

Multiplex degenerate PCR coupled with an oligo sorbent array for human endogenous retrovirus expression profiling

Human endogenous retroviruses (HERVs) can be divided into distinct families of tens to thousands of paralogous loci. The expression of HERV elements has been detected in all tissues tested to date, particularly germ cells, embryonic tissues and neoplastic tissues. Hence, the study of HERV expression could represent added value in cancer diagnosis. We developed a quantitative assay combining a multiplex degenerate PCR (MD-PCR) amplification, based on the relative conservation of the pol genes, and a colorimetric Oligo Sorbent Array (OLISA^®). Nine HERV families were selected and amplification primers and capture probes were designed for each family. The features required to achieve efficient amplification of most of the elements of each HERV family and balanced co-amplification of all HERV families were analyzed. We found that MD-PCR reliability, i.e. equivalence of amplification and dose-effect relationship, relied on the adjustment of three critical parameters: the primer degeneracy, the relative concentration of each primer and the total amount of primers in the amplification mixture. The analysis of tumoral versus normal tissues suggests that this assay could prove useful in tumor phenotyping.     

CODEHOP (COnsensus-DEgenerate Hybrid Oligonucleotide Primer) PCR primer design

We have developed a new primer design strategy for PCR amplification of distantly related gene sequences based on consensus-degenerate hybrid oligonucleotide primers (CODEHOPs). An interactive program has been written to design CODEHOP PCR primers from conserved blocks of amino acids within multiply-aligned protein sequences. Each CODEHOP consists of a pool of related primers containing all possible nucleotide sequences encoding 3-4 highly conserved amino acids within a 3' degenerate core. A longer 5' non-degenerate clamp region contains the most probable nucleotide predicted for each flanking codon. CODEHOPs are used in PCR amplification to isolate distantly related sequences encoding the conserved amino acid sequence. The primer design software and the CODEHOP PCR strategy have been utilized for the identification and characterization of new gene orthologs and paralogs in different plant, animal and bacterial species. In addition, this approach has been successful in identifying new pathogen species. The CODEHOP designer (http://blocks.fhcrc.org/codehop.html) is linked to BlockMaker and the Multiple Alignment Processor within the Blocks Database World Wide Web (http://blocks.fhcrc.org).     

Use of allele-specific sequencing primers is an efficient alternative to PCR subcloning of low-copy nuclear genes

Direct Sanger sequencing of polymerase chain reaction (PCR)-amplified nuclear genes leads to polymorphic sequences when allelic variation is present. To overcome this problem, most researchers subclone the PCR products to separate alleles. An alternative is to directly sequence the separate alleles using allele-specific primers. We tested two methods to enhance the specificity of allele-specific primers for use in direct sequencing: using short primers and amplification refractory mutation system (ARMS) technique. By shortening the allele-specific primer to 15-13 nucleotides, the single mismatch in the ultimate base of the primer is enough to hinder the amplification of the nontarget allele in direct sequencing and recover only the targeted allele at high accuracy. The deliberate addition of a second mismatch, as implemented in the ARMS technique, was less successful and seems better suited for allele-specific amplification in regular PCR rather than in direct sequencing.     

怀地黄SRAP扩增体系的建立与引物的筛选

为建立适合怀地黄SRAP-PCR分子标记技术体系,通过单因子实验分别研究了DNA模板浓度、TaqDNA聚合酶浓度、Mg2+浓度、引物浓度以及dNTP浓度对怀地黄SRAP扩增反应的影响,确立了适合怀地黄SRAP最佳反应体系为:在25μL的反应体系中,模板DNA量20ng/25μL、2.5mmol/LMg2+、0.32μmol/L的上下游引物、0.30μmol/L的dNTP以及2.5UTaq酶,并利用确定的体系从88个引物组合中筛选出12对适合怀地黄SRAP-PCR反应的引物。     

Linkage Analysis with Multiplexed Short Tandem Repeat Polymorphisms Using Infrared Fluorescence and M13 Tailed Primers

The use of short tandem repeat polymorphisms (STRPs) as marker loci for linkage analysis is becoming increasingly important due to their large numbers in the human genome and their high degree of polymorphism. Fluorescence-based detection of the STRP pattern with an automated DNA sequencer has improved the efficiency of this technique by eliminating the need for radioactivity and producing a digitized autoradiogram-like image that can be used for computer analysis. In an effort to simplify the procedure and to reduce the cost of fluorescence STRP analysis, we have developed a technique known as multiplexing STRPs with tailed primers (MSTP) using primers that have a 19-bp extension, identical to the sequence of an M13 sequencing primer, on the 5′ end of the forward primer in conjunction with multiplexing several primer pairs in a single polymerase chain reaction (PCR) amplification. The banding pattern is detected with the addition of the M13 primer-dye conjugate as the sole primer conjugated to the fluorescent dye, eliminating the need for direct conjugation of the infrared fluorescent dye tn the STRP primers. The use of MSTP for linkage analysis greatly reduces the number of PCR reactions. Up to five primer pairs can be multiplexed together in the same reaction. At present, a set of 148 STRP markers spaced at an average genetic distance of 28 cM throughout the autosomal genome can be analyzed in 37 sets of multiplexed amplification reactions. We have automated the analysis of these patterns for linkage using software that both detects the STRP banding pattern and determines their sizes. This information can then be exported in a user-defined format from a database manager for linkage analysis.     

RNA: a method to specifically inhibit PCR amplification of known members of a multigene family by degenerate primers

The polymerase chain reaction (PCR) is a versatile method to amplify specific DNA with oligonucleotide primers. By designing degenerate PCR primers based on amino acid sequences that are highly conserved among all known gene family members, new members of a multigene family can be identified. The inherent weakness of this approach is that the degenerate primers will amplify previously identified, in addition to new, family members. To specifically address this problem, we synthesized a specific RNA for each known family member so that it hybridized to one strand of the template, adjacent to the 3′-end of the primer, allowing the degenerate primer to bind yet preventing extension by DNA polymerase. To test our strategy, we used known members of the soluble, nitric oxide-sensitive guanylyl cyclase family as our templates and degenerate primers that discriminate this family from other guanylyl cyclases. We demonstrate that amplification of known members of this family is effectively and specifically inhibited by the corresponding RNAs, alone or in combination. This robust method can be adapted to any application where multiple PCR products are amplified, as long as the sequence of the desired and the undesired PCR product(s) is sufficiently distinct between the primers.     

Monoplex/multiplex linear-after-the-exponential-PCR assays combined with PrimeSafe and Dilute-'N'-Go sequencing

This protocol describes the design and execution of monoplex and multiplex linear-after-the-exponential (LATE)-PCR assays using a novel reagent, PrimeSafe, that suppresses all forms of mispriming. LATE-PCR is an advanced form of asymmetric amplification that uses a limiting primer and an excess primer for efficient exponential amplification of double-stranded DNA, followed by linear amplification of one strand. Each single-stranded amplicon can be quantitatively detected in real time or at end point. By separating primer annealing from product detection, LATE-PCR enables product analysis at low temperatures. Alternatively, each single strand can be sequenced by a convenient Dilute-'N'-Go procedure. Amplified samples are diluted with individual sequencing primers without the use of columns or spins. We have amplified and then sequenced 15 different single-stranded products generated in a single multiplexed LATE-PCR comprised of 15 pairs of unrelated primers. Dilute-'N'-Go dideoxy sequencing is more convenient, faster and less expensive than sequencing double-stranded amplicons generated via conventional symmetric PCR. The preparation of LATE-PCR products for Dilute-'N'-Go sequencing takes only 30 seconds.     

MegaPlex PCR: a strategy for multiplex amplification

'MegaPlex PCR' is a robust technology for highly multiplexed amplification of specific DNA sequences. It uses target-specific pairs of PCR primers that are physically separated by surface immobilization. Initial surface-based amplification cycles are then coupled to efficient solution-phase PCR using one common primer pair. We demonstrate this method by co-amplifying and genotyping 75 unselected human single-nucleotide polymorphism (SNP) loci.