A microbial biosensor system for dihalomethanes

A biosensor system able to measure dichloromethane (DCM) and other dihalomethanes has been developed. The analysis is based on Hyphomicrobium DM2 cells immobilized in alginate. A combination of transducers consisting of a flow-calorimeter followed by a chloride-sensitive electrode has been used. By this design it was possible to monitor different aspects of the cell metabolism from one and the same pulse of substrate. The detection limit for the biosensor was 0.1 µM dichloromethane. The biosensor system can be used for continuous measurements in a sample stream.     

A low temperature microbial biosensor using immobilised psychrophilic bacteria

A psychrophilic bacteria, Deinococcus radiodurans, was used to construct a biosensor to be used in a flow injection system. The transducer used was an O₂ electrode. The response of this cell-based electrode was studied towards a number of sugars. The temperature dependence of the electrode response correlated well with the behavior of the cells. Thus, the optimum temperature for measurement of glucose (0.55 mM) was about +5°C. Since the organism used is psychrophilic, a response time at this low temperature is similar to what is achieved with mesophilic organisms at room temperature. This is the first biosensor constructed using a psychrophilic microorganism.     

Microbial corrosion monitoring by an amperometric microbial biosensor developed using whole cell of Pseudomonas sp.

A microbial biosensor was developed for monitoring microbiologically influenced corrosion (MIC) of metallic materials in industrial systems. The Pseudomonas sp. isolated from corroded metal surface was immobilized on acetylcellulose membrane and its respiratory activity was estimated by measuring oxygen consumption. The microbial biosensor was used for the measurement of sulfuric acid in a batch culture medium contaminated by microorganisms. A linear relationship between the microbial sensor response and the concentration of sulfuric acid was observed. The response time of biosensor was 5 min and was dependent on the immobilized cell loading of Pseudomonas sp., pH, temperature and corrosive environments. The microbial biosensor response was stable, reproducible and specific for sensing of sulfur oxidizing bacterial activity.     

Mediated microbial biosensor using a novel yeast strain for wastewater BOD measurement

Two new yeast strains (SPT1 and SPT2) were isolated and immobilized on glassy carbon electrodes to form microbial biosensors for estimation of biochemical oxygen demand (BOD). Ferricyanide was proven to be the most efficient mediator to shuttle electrons from the redox center of reduced microbial enzymes to the electrode in the presence of excess glucose/glutamic acid (GGA). With a 3-fold greater metabolic assimilation capability and greater responses to various effluent samples, SPT1 was selected for sensor-BOD measurements. BOD estimations for the GGA standard resulted in an extended linear range: 2-100 mg/l. Response reproducibility was +/-10% for a GGA standard containing 10 mg BOD/l. For analysis of pulp mill effluents, the BOD detection limit was 2 mg/l with a response time of 5 min.     

The molecular size of N-methylglutamate dehydrogenase of Pseudomonas aminovorans.

N-Methylglutamate dehydrogenase, purified to a specific activity of 0.29 unit/mg of protein, gave one band on sodium dodecyl sulphate/polyacrylamide-gel electrophoresis, corresponding to a molecular weight of 130 000. Enzyme-Triton complexes were found to have a partial specific volume of 0.73 cm3/g, suggesting that the protein binds less than 0.1 g of Triton/g of protein. A molecular weight for the intact enzyme in the presence of 1% (w/v) Triton X-100 of 550 000 suggested that the enzyme may be a tetramer.     

A microbial biosensor for hydrogen sulfide monitoring based on potentiometry

In this study, a microbial biosensor for hydrogen sulfide (H₂S) detection based on Thiobacillus thioparus immobilized in a gelatin matrix was developed. The T. thioparus was immobilized via either surface adsorption on the gelatin matrix or entrapment in the matrix. The bacterial and gelatin concentration in the support were then varied in order to optimize the sensor response time and detection limit for both methods. The optimization was conducted by a statistical analysis of the measured biosensor response with various bacterial and polymer concentrations. According to our experiments with both immobilization methods, the optimized conditions for the entrapment method were found to be a gelatin concentration of 1% and an optical density of 82. For the surface adsorption method, 0.6% gelatin and an optical density of 88 were selected as the optimal conditions. A statistical model was developed based on the extent of the biosensor response in both methods of immobilization. The maximum change in the potential of the solution was 23.16 mV for the entrapment method and 34.34 mV for the surface absorption method. The response times for the entrapment and adsorption methods were 160 s and 105 s, respectively. The adsorption method is more advantageous for the development of a gas biosensor due to its shorter response time.     

A disposable microbial based biosensor for quality control in milk

The food industry needs suitable analytical methods for quality control, that is, methods that are rapid, reliable, specific and cost-effective as current wet chemistries and analytical practices are time consuming and may require highly skilled labor and expensive equipment. The need arises from heightened consumer concern about food composition and safety. The present study was carried out keeping in view the recently emerging concern of the presence of urea in milk, called "synthetic milk". The biocomponent part of the urea biosensor is an immobilized urease yielding bacterial cell biomass isolated from soil and is coupled to the ammonium ion selective electrode of a potentiometric transducer. The membrane potential of all types of potentiometric cell based probes is related to the activity of electrochemically detected product, and thus to the activity of the substrate by a form of the Nernst equation. Samples of milk were collected and analyzed for the presence of urea by the developed biosensor with a response time as low as 2 min. The results were in good correlation with the pure enzyme system.     

Amperometric microbial biosensor for p-nitrophenol using Moraxella sp.-modified carbon paste electrode

An amperometric microbial biosensor for highly specific, sensitive and rapid quantitative determination of p-nitrophenol was developed. The biosensor takes advantage of the ability of Moraxella sp. to specifically degrade p-nitrophenol to hydroquinone, a more electroactive compound than p-nitrophenol. The electrochemical oxidation current of hydroquinone formed in biodegradation of p-nitrophenol was measured at Moraxella sp.-modified carbon paste electrode and correlated to p-phenol concentrations. The optimum response was realized by electrode constructed using 15 mg of dry cell weight per 1 g of carbon paste and operating at 0.3 V (versus Ag/AgCl reference) in pH 7.5, 20 mM sodium phosphate buffer. Operating at these optimum conditions the biosensor had excellent selectivity against phenol derivatives and was able to measure as low as 20 nM (2.78 ppb) p-nitrophenol with very good accuracy and reproducibility. The biosensor was stable for approximately 3 weeks when stored at 4 degrees C. The applicability of the biosensor to measure p-nitrophenol in lake water was demonstrated.     

A steady-state kinetic study of the reaction catalysed by the secondary-amine mono-oxygenase of Pseudomonas aminovorans.

1. Secondary-amine mono-oxygenase (proposed EC group 1.14.99.-) was partially purified from trimethylamine-grown Pseudomonas aminovorans by (NH4)2SO4 fractionation, gel filtration, hydrophobic chromatography on 5-aminopentylamino-Sepharose, and affinity chromatography on Sepharose-bound NADH. 2. Some problems in the affinity-chromatography step are discussed. 3. A steady-state kinetic analysis varying substrate, oxygen and electron-donor concentrations was performed, which, over the concentration range studied, gave a series of families of approximately parallel double-reciprocal plots. From secondary and tertiary plots, Michaelis constants of 0.160 mM, 0.086 mM and 0.121 mM were obtained for dimethylamine, NADPH and oxygen respectively. 4. Product-inhibition studies supported the postulated Hexa Uni Ping Pong (triple-transfer) reaction mechanism.     

Pseudomonas putida A ATCC 12633 oxidizes trimethylamine aerobically via two different pathways

The present study examined the aerobic metabolism of trimethylamine in Pseudomonas putida A ATCC 12633 grown on tetradecyltrimethylammonium bromide or trimethylamine. In both conditions, the trimethylamine was used as a nitrogen source and also accumulated in the cell, slowing the bacterial growth. Decreased bacterial growth was counteracted by the addition of AlCl₃. Cell-free extracts prepared from cells grown aerobically on tetradecyltrimethylammonium bromide exhibited trimethylamine monooxygenase activity that produced trimethylamine N-oxide and trimethylamine N-oxide demethylase activity that produced dimethylamine. Cell-free extracts from cells grown on trimethylamine exhibited trimethylamine dehydrogenase activity that produced dimethylamine, which was oxidized to methanal and methylamine by dimethylamine dehydrogenase. These results show that this bacterial strain uses two enzymes to initiate the oxidation of trimethylamine in aerobic conditions. The apparent K_m for trimethylamine was 0.7 mM for trimethylamine monooxygenase and 4.0 mM for trimethylamine dehydrogenase, but both enzymes maintain similar catalytic efficiency (0.5 and 0.4, respectively). Trimethylamine dehydrogenase was inhibited by trimethylamine from 1 mM. Therefore, the accumulation of trimethylamine inside Pseudomonas putida A ATCC 12633 grown on tetradecyltrimethylammonium bromide or trimethylamine may be due to the low catalytic efficiency of trimethylamine monooxygenase and trimethylamine dehydrogenase.     

Immobilization of microbial cells on inner epidermis of onion bulb scale for biosensor application

Inner epidermis of onion bulb scales was used as a natural support for immobilization of microbial cells for biosensor application. A bacterium Sphingomonas sp. that hydrolyzes methyl parathion into a chromophoric product, p-nitrophenol (PNP), has been isolated and identified in our laboratory. PNP can be detected by electrochemical and colorimetric methods. Whole cells of Sphingomonas sp. were immobilized on inner epidermis of onion bulb scale by adsorption followed by cross-linking methods. Cells immobilized onion membrane was directly placed in the wells of microplate and associated with the optical transducer. Methyl parathion is an organophosphorus pesticide that has been widely used in the field of agriculture for insect pest control. This pesticide causes environmental pollution and ecological problem. A detection range 4-80 μM of methyl parathion was estimated from the linear range of calibration plot of enzymatic assay. A single membrane was reused for 52 reactions and was found to be stable for 32 days with 90% of its initial hydrolytic activity. The applicability of the cells immobilized onion membrane was also demonstrated with spiked samples.     

Solubilization, partial purification and properties of N-methylglutamate dehydrogenase from Pseudomonas aminovorans.

1. Extracts of amine-grown Pseudomonas aminovorans contained a particle-bound N-methylglutamate dehydrogenase (EC 1.5.99.5). The enzyme was not present in succinate-grown cells, and activity appeared before growth began in succinate-grown cells which had been transferred to methylamine growth medium. 2. Membrane-containing preparations from methylamine-grown cells catalysed an N-methylglutamate-dependent uptake of O2 or reduction of cytochrome c, which was sensitive to inhibitors of the electron-transport chain. 3. N-Methylglutamate dehydrogenase activity with phenazine methosulphate or 2,6-dichlorophenol-indophenol as electron acceptor could be solubilized with 1% (w/v) Triton X-100. The solubilized enzyme was much less active with cytochrome c as electron acceptor and did not sediment in 1 h at 150000g. Solubilization was accompanied by a change in the pH optimum for activity. 4. The solubilized enzyme was partially purified by Sepharose 4B and hydroxyapatite chromatograpy to yield a preparation 22-fold increased in specific activity over the crude extract. 5. The partially-purified enzyme was active with sarcosine, N-methylalanine and N-methylaspartate as well as with N-methylglutamate. Evidence suggesting activity with N-methyl D-amino acids as well as with the L-forms was obtained. 6. The enzyme was inhibited by p-chloromercuribenzoate, iodoacetamide and by both ionic and non-ionic detergents. 2-Oxoglutarate and formaldehyde were also inhibitors. 7. Kinetic analysis confirmed previous workers' observations of a group transfer (Ping Pong) mechanism. 8. Spectral observations suggested that the partially purified preparation contained flavoprotein and a b-type cytochrome. 9. The role of the enzyme in the oxidation of methylamine is discussed.     

The development of an amperometric microbial biosensor using Acetobacter pasteurianus for lactic acid

A microbial biosensor, using Acetobacter pasteurianus cells and an oxygen electrode, was developed for the determination of lactic acid. The bacterial cells were retained on a nylon membrane and attached to the surface of the oxygen electrode. In view of response time, stability and sensitivity, the biosensor performed best at 26°C and in pH 6 phthalate buffer containing magnesium sulfate. The activity of the retained cells was stable for approximately 170 h and was regenerable. The biosensor exhibited a hyperbolic response to both D- and L-lactic acid in the range of 10⁻⁴ M to 25 × 10⁻³ M. However, in the range 10⁻⁴ M to 15 × 10⁻⁴ M the response was linear. The microbial biosensor was applicable for detecting lactate concentration in yogurt and milk, since it was not sensitive to lactose, sucrose and glucose — three major components of such dairy products.     

Continuous determination of biochemical oxygen demand using microbial fuel cell type biosensor

A mediator-less microbial fuel cell (MFC) was used as a biochemical oxygen demand (BOD) sensor in an amperometric mode for real-time wastewater monitoring. At a hydraulic retention time of 1.05 h, BOD values of up to 100 mg/l were measured based on a linear relationship, while higher BOD values were measured using a lower feeding rate. About 60 min was required to reach a new steady-state current after the MFCs had been fed with different strength artificial wastewaters (Aws). The current generated from the MFCs fed with AW with a BOD of 100 mg/l was compared to determine the repeatability, and the difference was less than 10%. When the MFC was starved, the original current value was regained with a varying recovery time depending on the length of the starvation. During starvation, the MFC generated a background level current, probably due to an endogenous metabolism.