山茶科濒危植物猪血木的花器官发生

利用扫描电镜首次观察了山茶科极濒危植物猪血木(Euryodendron excelsum)的花器官发生过程。猪血木的花为两性完全花,萼片和花瓣均为2/5螺旋向心发生,单轮排列,且有逆时针和顺时针两种方式。雄蕊的形成是先形成一个环形分生组织,然后在环形分生组织上以2/5螺旋产生5束雄蕊原基,每一束雄蕊原基的第一雄蕊原基都是在对萼的位置产生,其它的雄蕊原基在其两侧产生。3心皮顺序发生,愈合成3室单子房,柱头平截不裂。猪血木与山茶亚科的花器官发生明显不同。     

Developmental study on the inflorescence and flower of Caldesia grandis Samuel (Alismataceae)

The inflorescence and floral development of Caldesia grandis Samuel is reported for the first time in this paper. The basic units of the large cymo‐thyrsus inflorescence are short panicles that are arranged in a pseudowhorl. Each panicle gives rise spirally to three bract primordia also arranged in a pseudowhorl. The branch primordia arise at the axils of the bracts. Each panicle produces spirally three bract primordia with triradiate symmetry (or in a pseudowhorl) and three floral primordia in the axils of the bract primordia. The apex of the panicle becomes a terminal floral primordium after the initiations of lateral bract primordia and floral primordia. Three sepal primordia are initiated approximately in a single whorl from the floral primordium. Three petal primordia are initiated alternate to the sepal primordia, but their subsequent development is much delayed. The first six stamen primordia are initiated as three pairs in a single whorl and each pair appears to be antipetalous as in other genera of the Alismataceae. The stamen primordia of the second whorl are initiated trimerously and opposite to the petals. Usually, 9–12 stamens are initiated in a flower. There is successive transition between the initiation of stamen and carpel primordia. The six first‐initiated carpel primordia rise simultaneously in a whorl and alternate with the trimerous stamens, but the succeeding ones are initiated in irregular spirals, and there are 15–21 carpels developed in a flower. Petals begin to enlarge and expand when anthers of stamens have differentiated microsporangia. Such features do not occur in C. parnassifolia. In the latter, six stamen primordia are initiated in two whorls of three, carpel primordia are initiated in 1–3 whorls, and there is no delay in the development of petals. C. grandis is thus considered more primitive and C. parnassifolia more derived. C. grandis shares more similarities in features of floral development with Alsma, Echinodorus, Luronium and Sagittaria. © 2002 The Linnean Society of London, Botanical Journal of the Linnean Society, 2002, 140 , 39–47.     

大戟科麻疯树属三种植物花器官发生

利用扫描电子显微镜观察了大戟科Euphorbiaceae麻疯树属Jatropha麻疯树J. curcas L.、佛肚树J. podagrica Hook.和棉叶麻疯树J. gossypifolia L.花器官发生。结果表明: 麻疯树、佛肚树和棉叶麻疯树花萼原基均为2/5型螺旋发生。在同一个种不同的花蕾中, 花萼的发生有两种顺序: 逆时针方向和顺时针方向。远轴面非正中位的1枚先发生。5枚花瓣原基几乎同时发生。雄花中雄蕊两轮, 外轮对瓣, 内轮对萼。研究的3种麻疯树属植物雄蕊发生方式有两种类型: 麻疯树亚属麻疯树的5枚外轮雄蕊先同时发生, 5枚内轮雄蕊后同时发生, 佛肚树亚属佛肚树和棉叶麻疯树雄蕊8-9枚, 排成两轮, 内外轮雄蕊同时发生。雌花的3枚心皮原基为同时发生。麻疯树属单性花, 雌花的子房膨大而雄蕊退化, 雄花的雄蕊正常发育, 子房缺失。根据雄蕊发生方式, 支持将麻疯树属分为麻疯树亚属subgen. Jatropha和佛肚树亚属subgen. Curcas。     

商陆属植物的花器官发生

为进一步研究商陆科的系统位置提供花器官发生和发育的证据,在扫描电子显微镜下观察了商陆Phytolacca acinosa、多雄蕊商陆P. polyandra和垂序商陆P. americana的花器官发生.结果表明: 商陆属植物花被的发生均为2/5型螺旋发生.在同一个种不同的花蕾中,花被的发生有两种顺序:逆时针方向和顺时针方向.远轴侧非正中位的1枚先发生.雄蕊发生于环状分生组织.在单轮雄蕊的种中8-10枚雄蕊为近同时发生;两轮雄蕊的种8枚内轮雄蕊先发生,6-8枚外轮雄蕊随后发生,内轮雄蕊为同时发生,外轮雄蕊发生次序不规则.心皮原基也发生于环状分生组织,8-10枚心皮原基为同时发生.在后来的发育过程中,商陆的心皮发育成近离生心皮雌蕊;其他2种心皮侧壁联合发育成合生心皮雌蕊.对商陆属植物花器官发生的类型及发育形态学做了分析,结果支持商陆科在石竹目系统发育中处于原始地位的观点.     

阔叶杨桐的花器官发生(山茶科)

利用扫描电镜首次观察了山茶科厚皮香亚科植物阔叶杨桐的花器官发生过程。阔叶杨桐的花被片和五束雄蕊都是2/5螺旋向心发生,且有逆时针和顺时针两种螺旋方式;五束雄蕊在环形雄蕊原基上产生,且每一束都是由中间向两端发生;由五心皮形成的中轴胎座内出现一衍生的可育胎座。阔叶杨桐的花器官发生过程与本亚科的猪血木明显不同,该研究为厚皮香亚科乃至山茶科的系统发育与演化提供花器官方面的依据。     

宽叶泽苔草的花器官发生

通过扫描电镜观察了宽叶泽苔草Caldesia grandisSamuel.的花器官发生。宽叶泽苔草 的萼片3枚,逆时针螺旋向心发生 ;花瓣3枚,呈一轮近同时发生,未观察到花瓣_雄蕊复合原基;雄蕊、心皮原基皆轮状向心 发生,最先近同时发生的6枚原基全部发育成雄蕊,随后发生的6枚原基早期并无差别,在发 育过程中逐渐出现形态差异,直至其中1－4枚发育成心皮,其余的发育成雄蕊;而后的几轮 心皮原基,6枚一轮,陆续向心相间发生。本文揭示了3枚萼片螺旋状的发生方式,并推测这种螺旋方式是泽泻科植物进化过程中保留下来     

青城细辛的花器官发生

利用扫描电镜观察了青城细辛(Asarum splendens)的花器官发生过程。青城细辛的花器官为轮状结构,向心发生,依次为两轮3基数的花被原基,两轮6基数的雄蕊原基和一轮6基数的心皮原基。两轮花被原基互生,只有外轮(先发生的一轮)花被原基完全发育,而内轮(后发生的一轮)花被原基在发育过程中逐渐退化。两轮雄蕊原基为离心发生:位于内侧的一轮雄蕊原基先发生,每两个原基正对第一轮发生的花被原基,外侧的一轮雄蕊原基后发生,与内轮雄蕊原基互生。心皮与内侧的一轮雄蕊互生。     

青城细辛的花器官发生

利用扫描电镜观察了青城细辛（Asarum splendens）的花器官发生过程。青城细辛的花器官为轮状结构,向心发生,依次为两轮3基数的花被原基,两轮6基数的雄蕊原基和一轮6基数的心皮原基。两轮花被原基互生,只有外轮（先发生的一轮）花被原基完全发育,而内轮（后发生的一轮）花被原基在发育过程中逐渐退化。两轮雄蕊原基为离心发生：位于内侧的一轮雄蕊原基先发生,每两个原基正对第一轮发生的花被原基,外侧的一轮雄蕊原基后发生,与内轮雄蕊原基互生。心皮与内侧的一轮雄蕊互生。     

FLORAL DEVELOPMENT OF HYDROCHARIS MORSUS-RANAE (HYDROCHARITACEAE)

In both male and female flowers of H. morsus-ranae the primordia of the floral appendages appear in an acropetal succession consisting of alternating trimerous whorls. In the male flower a whorl of sepals is followed by a whorl of petals, three whorls of stamens, and a whorl of filamentous staminodes. The mature androecial arrangement therefore consists of two antisepalous stamen whorls, an antipetalous whorl of stamens, and antipetalous staminodes. Shortly before anthesis, basal meristematic upgrowth between filaments of adjacent whorls produces paired stamens, joining Whorls 1 and 3, and Whorl 2 with the staminodial whorl. A central domelike structure develops between the closely appressed filaments of the inner stamen and staminodial whorl, giving the structure a lobed appearance. After petal inception in the female flower a whorl of antisepalous staminodes develop, each of which may bifurcate to form a pair of staminodes. During staminode development a girdling primordium arises by upgrowth at the periphery of the floral apex. The girdling primordium rapidly forms six gynoecial primordia, which then go on to produce six free styles with bifid stigmas. Intercalary meristem activity, below the point of floral appendage attachment, leads to the production of a syncarpous inferior ovary with six parietal placentae. The styles and carpels remain open along their ventral sutures. During the final stages of female floral development, several hundred ovules develop along the carpel walls, and three nectaries develop dorsally and basally on the three antipetalous styles.     

泽苔草的花器官发生

本文用扫描电镜观察了泽苔草的花器官发生过程,观察结果表明：花萼以螺旋状方式向心发生,花瓣以接近轮状方式近同时发生,不存在花瓣雄蕊复合原基。雄蕊和心皮均以轮状向心方式发生,6枚雄蕊分两轮分别在对萼和对瓣的位置先后发生,至发育的后期排成一轮,但仍分别处于对萼和对瓣的位置;随后发生的第一轮3个心皮原基与3枚萼片相对,第二、三轮心皮原基分别为1~3个,与前一轮心皮相间排列向心发生。本文首次揭示了泽苔草花被的外轮3个萼片螺旋状发生方式,这种螺旋状方式很可能是泽泻科植物的花部结构在进化过程中适应环境而保留下来的一种较原始的叶性特征。     

突脉金丝桃的花器官发生及其系统学意义

利用扫描电镜（SEM）观察了突脉金丝桃（Hypericum przewalskii）（金丝桃科）的花部器官发生发育过程。结果表明,突脉金丝桃2枚苞片原基首先发生,花原基在苞片原基的包裹中完成发育。在苞片原基发生后,5枚萼片原基沿2/5圆周依次发生。萼片原基发生近完成时,5枚雄蕊—花瓣共同原基在萼片原基之间的角隅处近同时发生,此后,雄蕊—花瓣共同原基下部向外伸展形成花瓣原基,上部向上凸起形成与花瓣原基相对的雄蕊原基,之后雄蕊原基由内向外依次分化发育产生次生雄蕊原基,随着次生雄蕊原基的发育和数目的增多,形成了5束雄蕊。次生雄蕊原基发生的同时,5枚心皮原基近同时发生。突脉金丝桃雄蕊束的发生方式表明,金丝桃属的雄蕊束可能起源于5基数的单轮雄蕊。金丝桃科与藤黄科植物花瓣及雄蕊原基发生方式的显著不同,支持了APG Ⅲ系统将金丝桃亚科从藤黄科中独立为金丝桃科的观点。     

Negative regulation of the Arabidopsis homeotic gene AGAMOUS by the APETALA2 product.

We characterized the distribution of AGAMOUS (AG) RNA during early flower development in Arabidopsis. Mutations in this homeotic gene cause the transformation of stamens to petals in floral whorl 3 and of carpels to another ag flower in floral whorl 4. We found that AG RNA is present in the stamen and carpel primordia but is undetectable in sepal and petal primordia throughout early wild-type flower development, consistent with the mutant phenotype. We also analyzed the distribution of AG RNA in apetela2 (ap2) mutant flowers. AP2 is a floral homeotic gene that is necessary for the normal development of sepals and petals in floral whorls 1 and 2. In ap2 mutant flowers, AG RNA is present in the organ primordia of all floral whorls. These observations show that the expression patterns of the Arabidopsis floral homeotic genes are in part established by regulatory interactions between these genes.     

FLORAL DEVELOPMENT IN MANGROVE RHIZOPHORACEAE

The flowers of mangrove Rhizophoraceae (tribe Rhizophoreae) are adapted to three different pollination mechanisms. Floral development of representative species of all four genera suggests that the ancestral flower of the tribe was unspecialized, with successively initiated whorls of separate sepals, petals, antisepalous stamens, and antipetalous stamens; at its inception, the gynoecium had a united, half-inferior ovary and separate stigmatic lobes. This developmental pattern is found in Rhizophora mangle (wind-pollinated) and Ceriops decandra (insect-pollinated). In Kandelia, all floral organs distal to the sepals are initiated simultaneously, and there has apparently been an evolutionary amplification in the number of stamens to about six times the number of petals. Explosive pollen release evolved independently in C. tagal and in Bruguiera. In the former, all stamens belong to one whorl and arise simultaneously upon a very weakly differentiated androecial ring primordium. In Bruguiera, the androecial ring is pronounced, and two whorls of stamens arise upon it; the primordia of the antisepalous whorl arise first but are closer to the center of the apex than the antipetalous stamen primordia. The antisepalous stamens bend toward and are enclosed by the petals early in development. In all genera, the inferior ovary develops by zonal growth of receptacular tissue; additional intercalary growth above the placenta occurs in Bruguiera. In general, floral specialization is accompanied by an increase in the width of the floral apex compared to the size of the primordia, increasing fusion of the stylar primordia, and decreasing prominence of the superior portion of the ovary. Apparent specializations of petal appendages for water storage, including the presence of sub-terminal hydathodes (previously unreported in any angiosperm), were found in two species in which flowers remain open during the day but were absent from two species normally pollinated at night or at dawn. Distinctive tribal characteristics that may aid in phylogenetic analysis include the mode of development of the inferior ovary; the aristate, bifid, usually fringed petals that individually enclose one or more stamens; the intrastaminal floral disc; and the initially subepidermal laticiferous cell layer in the sepals and ovary.     

Inflorescence and Flower Development of Globba barthei ( Zingiberaceae)

Inflorescence of Globba barthei is a thyrse . Primary bracts are initiated in a spiral phyllotactic pattern on the inflorescence apex . Cincinnus primordia are initiated in the axils of primary bracts . These promordia develop secondarybracts and floral primordia . The floral primordium continues to enlarge and produce a ring primordium . Sepals are initiated sequentially from the rounded corner of the primordium . The ring primordium separates three common primordium surrounding a central cavity . The adaxial common primordium is the first to separate . This primordium divides transversely and producespetal and fertile stamen . The remaining two common primordium transversely separate and produce respectively a petal and a petaloid . As the flower developing , the cavity of the floral cup becomes triangular . The angles of this triangle are the sites of outer androecial primordium . The abaxial androecia forms slightly earlier than the two adaxial ones, and then this primordium ceases growth soon . The two posterior primordia continue growth to produce the lateral petaloid staminodes . During this stage , gynoecia initiate from the floral cup and continue to fuse and develop into style and stigma. In addition ,Initiation of the bulbil primordium is observed at base of inflorescence axis during the early floral development . The bulbil primordium initiates in the axil of primary bract . The evolutionary significance of six androecia is discussed .     

观光木的花器官发生

在扫描电镜下观察了观光木(Tsoongiodendron odorum Chun)花器官的发生发育。观光木的花原基最初为近圆形,随着顶端分生组织的活动,花原基边缘处出现浅凹,形成第一轮花被片原基,此时,花原基呈三角形排列,后两轮花被片原基依次发生,与前一轮互生;在内轮花被片发生的后期,最初几枚雄蕊原基几乎同时出现,呈螺旋状向顶发生,最后排列成三角圆锥状;雄蕊原基发育后期,心皮原基开始发育,形状与发育初期的雄蕊原基相似,随后心皮原基进行侧向生长,在近轴面出现浅凹,进而发育为凹槽,形成腹缝线,最后腹缝线完全愈合。腹缝线愈合现象表明观光木具有进化特征,与含笑属的亲缘关系较近。     

毛舞花姜花器官的发生与发育

通过扫描电镜观察了毛舞花姜(Globba barthei Gagne p.)的花序及花器官的发生与发育。3枚萼片原基首先于花顶连续发生,随后花顶的中心凹陷形成环状原基,环状原基进一步分化形成三枚花瓣—雄蕊共同原基,并在花顶的中心形成花杯。共同原基分化形成花瓣和三枚内轮雄蕊,紧接着外轮雄蕊在花杯的顶点发生。远轴的两枚内轮雄蕊延伸生长并相互融合形成了唇瓣,近轴的一枚形成了可育雄蕊;近轴的两枚外轮雄蕊发育形成了成熟花结构中的侧生退化雄蕊,而远轴的一枚缺失。近轴的两枚外轮雄蕊原基起始的同时,3枚心皮原基也在中心花杯的内侧发生而后与外轮雄蕊相间排列。对毛舞花姜花序的发生和发育的观察发现,在花序轴的头几片初级苞片中产生的是珠芽原基而非蝎尾状小花序原基,其形态特征类似于早期的蝎尾状小花序原基,由此推测珠芽很可能是蝎尾状小花序的变异。     

Flower structure and development in Tupidanthus calyptratus (Araliaceae): an extreme case of polymery among asterids

Flowers of Tupidanthus show an extreme case of floral polymery among asterids. Floral development and gynoecium structure have been examined. The floral meristem has a complex folded shape. The tiny calyx is initiated as a continuous ring primordium. The corolla is initiated as a lobed ring and develops into a calyptra. All stamen primordia appear simultaneously as a single whorl. The carpels, also in a single whorl, tend to alternate with the stamens. Some Schefflera species related to Tupidanthus are also studied. The flower of Tupidanthus is interpreted as a result of fasciation. Further investigation should determine whether mutation(s) in gene(s) of the CLAVATA family are responsible for the fasciation here. The significance of Tupidanthus for understanding spatial pattern formation in flowers of Araliaceae, and both functional and developmental constraints in angiosperm flowers with a single polymerous carpel whorl are discussed.     

Floral ontogeny, pattern formation, and evolution in Hibbertia and Adrastaea (Dilleniaceae)

Floral development was compared with scanning electron microscopy in 12 Australian species of Hibbertia representing most of its morphological variation, and in the related Adrastaea (Dilleniaceae). Calyx and corolla arise in quincuncial helices in radially symmetrical species, while the petals initiate unidirectionally from one side in zygomorphic species. Stamen number (3-200+) proliferates by centrifugal addition of individual primordia or by innovations of common primordia and ring meristems. Common primordia arise in single-stamen positions alternately with petals, and each produces one to several stamens centrifugally that remain attached to a shared base and form a stamen fascicle. A ring meristem in Adrastaea initiates a whorl of five stamens, alternate with the first stamens but outside their whorl. In radially symmetrical species of Hibbertia, a first ring of stamens is supplemented centrifugally by additional stamens on a meristem ring. The first stamens in zygomorphic species of Hibbertia initiate as a terminal ridge on the floral apex, with subsequent stamens added centrifugally on one side and two carpels initiated on the opposite side. The carpels arise as a simultaneous ring in radially symmetrical flowers, or as a simultaneous pair in zygomorphic species. Staminodial presence is viewed as of minor significance. Four pollinator syndromes are proposed for Hibbertia, related to differing floral architecture.     

Inflorescence and flower development in the Hedychieae (Zingiberaceae): Hedychium coccineum Smith

The inflorescence of Hedychium coccineum Smith is thyrse, and the primary bracts are initiated in a spiral phyllotactic pattern on the sides of the inflorescence dome. Cincinnus primordia are initiated on the flank of the inflorescence apex, in the axils of primary bracts. This primordium subsequently develops a bract and a floral primordium. Then, the floral primordium enlarges, flattens apically, and becomes rounded. Sepals are initiated sequentially from the rounded corner of the primordium ring sepal initiation, and the floral primordium continues to enlarge and produces a ring primordium. Later, this ring primordium separates three common primordia surrounding a central cavity. The adaxial common primordium is the first separation. This primordium produces the posterior petal and the fertile stamen. The remaining two common primordia separate and produce respectively a petal and a petaloid, the inner androecial member. As the flower enlarges, the cavity of the floral cup becomes a rounded–triangular apex; these apices are the sites of outer androecial primordium initiation. The abaxial outer androecial member slightly forms before the two adaxial members develop. But this primordium ceases growth soon after initiation, while the two posterior primordia continue growth to produce the lateral petaloid staminodes. During this stage, gynoecial initiates in the floral cup and continues to grow until extending beyond the labellum.