Genetic and genomic analyses for economically important traits and their applications in molecular breeding of cultured fish

The traits of cultured fish must continually be genetically improved to supply high-quality animal protein for human consumption.Economically important fish traits are controlled by multiple gene quantitative trait loci(QTL),most of which have minor effects,but a few genes may have major effects useful for molecular breeding.In this review,we chose relevant studies on some of the most intensively cultured fish and concisely summarize progress on identifying and verifying QTLs for such traits as growth,disease and stress resistance and sex in recent decades.The potential applications of these major-effect genes and their associated markers in marker-assisted selection and molecular breeding,as well as future research directions are also discussed.These genetic and genomic analyses will be valuable for elucidating the mechanisms modulating economically important traits and to establish more effective molecular breeding techniques in fish.     

A Sequential Quantitative Trait Locus Fine-Mapping Strategy Using Recombinant-Derived Progeny

A thorough understanding of the quantitative trait loci(QTLs)that underlie agronomically important traits in crops would greatly increase agricultural productivity.Although advances have been made in QTL cloning,the majority of QTLs remain unknown because of their low heritability and minor contributions to phenotypic performance.Here we summarize the key advantages and disadvantages of current QTL fine-mapping methodologies,and then introduce a sequential QTL fine-mapping strategy based on both genotypes and phenotypes of progeny derived from recombinants.With this mapping strategy,experimental errors could be dramatically diminished so as to reveal the authentic genetic effect of target QTLs.The number of progeny required to detect QTLs atvarious R~2 values was calculated,and the backcross generation suitable to start QTL fine-mapping was also estimated.This mapping strategy has proved to be very powerful in narrowing down QTL regions,particularly minor-effect QTLs,as revealed by fine-mapping of various resistance QTLs in maize.Application of this sequential QTL mapping strategy should accelerate cloning of agronomically important QTLs,which is currently a substantial challenge in crops.     

Progress in the Study of Molecular Genetic Improvements of Poplar in China

The poplar is one of the most economically important and intensively studied tree species owing to its wide application in the timber industry and as a model material for the study of woody plants. The natural resource of poplars in China is replete. Over the past 10 years, the application of molecular biological techniques to genetic improvements in poplar species has been widely studied in China. Recent advances in molecular genetic improvements of poplar, including cDNA library construction, gene cloning and identification, genetic engineering, gene expression, genetic linkage map construction, mapping of quantitative trait loci （QTL） and molecular-assisted selection, are reviewed in the present paper. In addition, the application of modern biotechnology to molecular improvements in the genetic traits of the poplar and some unsolved problems are discussed.     

Fine mapping quantitative trait loci affecting milk production traits on bovine chromosome 6 in a Chinese Holstein population

To fine map the previously detected quantitative trait loci （QTLs） affecting milk production traits on bovine chromosome 6 （BTA6）, 15 microsatellite markers situated within an interval of 14.3 cM spanning from BMS690 to BM4528 were selected and 918 daughters of 8 sires were genotyped. Two mapping approaches, haplotype sharing based LD mapping and single marker regression mapping, were used to analyze the data. Both approaches revealed a quantitative trait locus （QTL） with significant effects on milk yield, fat yield and protein yield located in the segment flanked by markers BMS483 and MNB209, which spans a genetic distance of 0.6 cM and a physical distance of 1.5 Mb. In addition, the single marker regression mapping also revealed a QTL affecting fat percentage and protein percentage at marker DIK2291. Our fine mapping work will facilitate the cloning of candidate genes underlying the QTLs for milk production traits.     

Study on mapping Quantitative Trait Loci for animal complex binary traits using Bayesian-Markov chain Monte Carlo approach

It is a challenging issue to map Quantitative Trait Loci (QTL) underlying complex discrete traits,which usually show discontinuous distribution and less information,using conventional statisti-cal methods. Bayesian-Markov chain Monte Carlo (Bayesian-MCMC) approach is the key procedure in mapping QTL for complex binary traits,which provides a complete posterior distribution for QTL parameters using all prior information. As a consequence,Bayesian estimates of all interested vari-ables can be obtained straightforwardly basing on their posterior samples simulated by the MCMC algorithm. In our study,utilities of Bayesian-MCMC are demonstrated using simulated several ani-mal outbred full-sib families with different family structures for a complex binary trait underlied by both a QTL and polygene. Under the Identity-by-Descent-Based variance component random model,three samplers basing on MCMC,including Gibbs sampling,Metropolis algorithm and reversible jump MCMC,were implemented to generate the joint posterior distribution of all unknowns so that the QTL parameters were obtained by Bayesian statistical inferring. The results showed that Bayesian-MCMC approach could work well and robust under different family structures and QTL effects. As family size increases and the number of family decreases,the accuracy of the parameter estimates will be im-proved. When the true QTL has a small effect,using outbred population experiment design with large family size is the optimal mapping strategy.     

QTL molecular marker location of powdery mildew resistance in cucumber (Cucumis sativus L.)

The cucumber lines, S94 (Northern China open-field type, powdery mildew (PM) susceptible) and S06 (European greenhouse type, PM resistant), and their F6:7 populations were used to investigate PM re-sistance under seedling spray inoculation in 2005/Autumn and 2006/Spring. QTL analysis was under-taken based on a constructed molecular linkage map of the corresponding F6 population using com-posite interval mapping. A total of four QTLs (pm1.1, pm2.1, pm4.1 and pm6.1) for PM resistance were identified and located on LG 1, 2, 4 and 6, respectively, explaining 5.2%-21.0% of the phenotypic variation. Three consistent QTLs (pm1.1, pm2.1 and pm4.1) were detected under the two test conditions. The QTL pm6.1 was only identified in 2005/Autumn. The total phenotypic variation explained by the QTLs was 52.0% and 42.0% in 2005/Autumn and 2006/Spring, respectively. Anchor markers tightly linked to those loci (<5 cM) could lay a basis for both molecular marker-assisted breeding and map-based gene cloning of the PM-resistance gene in cucumber.     

水产动物遗传连锁图谱的研究现状及应用展望

综述了近年来遗传连锁图谱在水产生物中的研究现状,包括作图群体、作图方法等,并对连锁图谱的应用前景作了展望,指出其在分子标记辅助育种、基因定位与克隆及比较基因组学等方面的应用潜力。 Abstract:Constructing genetic linkage map is an essential tool to acknowledge genome in aquaculture species.This paper has reviewed the current status of genetic linkage map research,including mapping population,mapping method and molecular markers used to construct linkage map.Linkage map has great potential in marker assisted selection (MAS),gene locating and cloning,and comparative genome mapping.Genetic linkage map with high density and wide coverage of genome will allow cloning the genes which contribute to economically important traits.The ultimate aim of the constructing linkage map is the development of fast-growing,disease-resistant strains of the major aquaculture species.     

Quantitative Trait Loci Mapping of Leaf Morphological Traits and Chlorophyll Content in Cultivated Tetraploid Cotton

Genetic mapping provides a powerful tool for quantitative trait loci （QTL） analysis at the molecular level. A simple sequence repeat （SSR） genetic map containing 590 markers and a BCI population from two cultivated tetraploid cotton （Gossypium hirsutum L.） cultivars, namely TM-1 and Hai 7124 （G. barbadense L.）, were used to map and analyze QTL using the composite interval mapping （CIM） method. Thirty one QTLs, 10 for lobe length, 13 for lobe width, six for lobe angle, and two for leaf chlorophyll content, were detected on 15 chromosomes or linkage groups at logarithm of odds （LOD）≥2.0, of which 15 were found for leaf morphology at LOD≥3.0. The genetic effects of the QTL were estimated. These results are fundamental for marker-assisted selection （MAS） of these traits in tetraploid cotton breeding.     

Mapping QTLs for seed yield and drought susceptibility index in soy-bean（Glycine max L.） across different environments

Drought stress has long been a major constraint in maintaining yield stability of soybean （Glycine max （L.） Merr.） in rainfed ecosystems. The identification of consistent quantitative trait loci （QTL） involving seed yield per plant （YP） and drought susceptibility index （DSI） in a population across different environments would therefore be important in molecular marker-assisted breeding of soybean cultivars suitable for rainfed regions. The YP of a recombinant line population of 184 F2：7：11 lines from a cross of Kefengl and Nannong1138-2 was studied under water-stressed （WS） and well-watered （WW） conditions in field （F） and greenhouse （G） trials, and DSI for yield was calculated in two trials. Nineteen QTLs associated with YP-WS and YP-WW, and 10 QTLs associated with DSI, were identi- fied. Comparison of these QTL locations with previous findings showed that the majority of these regions control one or more traits re- lated to yield and other agronomic traits. One QTL on molecular linkage group （MLG） K for YP-F, and two QTLs on MLG C2 for YP-G, remained constant across different water regimes. The regions on MLG C2 for YP-WW-F and MLG H for YP-WS-F had a pleiotropic effect on DSI-F, and MLG A1 for YP-WS-G had a pleiotropic effect on DSI-G. The identification of consistent QTLs for YP and DSI across different environments will significantly improve the efficiency of selecting for drought tolerance in soybean.     

The Statistical Power of Inclusive Composite Interval Mapping in Detecting Digenic Epistasis Showing Common F2 Segregation Ratios

Epistasis is a commonly observed genetic phenomenon and an important source of variation of complex traits,which could maintain additive variance and therefore assure the long-term genetic gain in breeding.Inclusive composite interval mapping（ICIM） is able to identify epistatic quantitative trait loci（QTLs） no matter whether the two interacting QTLs have any additive effects.In this article,we conducted a simulation study to evaluate detection power and false discovery rate（FDR） of ICIM epistatic mapping,by considering F₂ and doubled haploid（DH） populations,different F₂ segregation ratios and population sizes.Results indicated that estimations of QTL locations and effects were unbiased,and the detection power of epistatic mapping was largely affected by population size,heritability of epistasis,and the amount and distribution of genetic effects.When the same likelihood of odd（LOD） threshold was used,detection power of QTL was higher in F₂ population than power in DH population;meanwhile FDR in F₂ was also higher than that in DH.The increase of marker density from 10 cM to 5 cM led to similar detection power but higher FDR.In simulated populations,ICIM achieved better mapping results than multiple interval mapping（MIM） in estimation of QTL positions and effect.At the end,we gave epistatic mapping results of ICIM in one actual population in rice（Oryza sativa L.）.