A sensitive enzyme assay for biotin, avidin, and streptavidin

Reciprocal enzyme assays are described for the vitamin biotin and for the biotin-binding proteins avidin and streptavidin. The assays are based on the following steps: (a) biotinylated bovine serum albumin is adsorbed onto microtiter plates; (b) streptavidin (or avidin) is bound to the biotin-coated plates; (c) biotinylated enzyme (in this case alkaline phosphatase) is then interacted with the free biotin-binding sites on the immobilized protein. For biotin assay, competition between the free vitamin and the biotinylated enzyme is carried out between steps (b) and (c). The method takes advantage of the four biotin-binding sites which characterize both avidin and streptavidin. The method is extremely versatile and accurate over a concentration range exceeding three orders of magnitude. The lower limits of detection are approximately 2 pg/ml (0.2 pg/sample) for biotin and less than 100 ng/ml (10 ng/sample) for either avidin or streptavidin.     

Imaging proteins in live mammalian cells with biotin ligase and monovalent streptavidin

This protocol describes a simple and efficient way to label specific cell surface proteins with biophysical probes on mammalian cells. Cell surface proteins tagged with a 15-amino acid peptide are biotinylated by Escherichia coli biotin ligase (BirA), whereas endogenous proteins are not modified. The biotin group then allows sensitive and stable binding by streptavidin conjugates. This protocol describes the optimal use of BirA and streptavidin for site-specific labeling and also how to produce BirA and monovalent streptavidin. Streptavidin is tetravalent and the cross-linking of biotinylated targets disrupts many of streptavidin's applications. Monovalent streptavidin has only a single functional biotin-binding site, but retains the femtomolar affinity, low off-rate and high thermostability of wild-type streptavidin. Site-specific biotinylation and streptavidin staining take only a few minutes, while expression of BirA takes 4 d and expression of monovalent streptavidin takes 8 d.     

Intracellular production of a soluble and functional monomeric streptavidin in Escherichia coli and its application for affinity purification of biotinylated proteins

Monomeric forms of avidin and streptavidin [(strept)avidin] have many potential applications. However, generation of monomeric (strept)avidin in sufficient quantity is a major limiting factor. We report the successful intracellular production of an improved version of monomeric streptavidin (M4) in a soluble and functional state at a level of approximately 70 mg/L of an Escherichia coli shake flask culture. It could be affinity purified in one step using biotin agarose with 70% recovery. BIAcore biosensor analysis using biotinylated bovine serum albumin confirmed its desirable kinetic properties. Two biotinylated proteins with different degrees of biotinylation (5.5 and 1 biotin per protein) pre-mixed with cellular extracts from Bacillus subtilis were used to examine the use of M4-agarose in affinity purification of protein. Both biotinylated proteins could be purified in high purity with 75-80% recovery. With the mild elution and matrix regeneration conditions, the M4-agarose had been reused four times without any detectable loss of binding capability. The relatively high-level overproduction and easy purification of M4, excellent kinetic properties with biotinylated proteins and mild procedure for protein purification make vital advancements in cost-effective preparation of monomeric streptavidin affinity matrix with desirable properties for purification of biotinylated molecules.     

Mutation of a critical tryptophan to lysine in avidin or streptavidin may explain why sea urchin fibropellin adopts an avidin-like domain

Sea urchin fibropellins are epidermal growth factor homologues that harbor a C-terminal domain, similar in sequence to hen egg-white avidin and bacterial streptavidin. The fibropellin sequence was used as a conceptual template for mutation of designated conserved tryptophan residues in the biotin-binding sites of the tetrameric proteins, avidin and streptavidin. Three different mutations of avidin, Trp-110-Lys, Trp-70-Arg and the double mutant, were expressed in a baculovirus-infected insect cell system. A mutant of streptavidin, Trp-120-Lys, was similarly expressed. The homologous tryptophan to lysine (W-->K) mutations of avidin and streptavidin were both capable of binding biotin and biotinylated material. Their affinity for the vitamin was, however, significantly reduced: from K(d) approximately 10(-15) M of the wild-type tetramer down to K(d) approximately 10(-8) M for both W-->K mutants. In fact, their binding to immobilized biotin matrices could be reversed by the presence of free biotin. The Trp-70-Arg mutant of avidin bound biotin very poorly and the double mutant (which emulates the fibropellin domain) failed to bind biotin at all. Using a gel filtration fast-protein liquid chromatography assay, both W-->K mutants were found to form stable dimers in solution. These findings may indicate that mimicry in the nature of the avidin sequence and fold by the fibropellins is not designed to generate biotin-binding, but may serve to secure an appropriate structure for facilitating dimerization.     

Bifunctional avidin with covalently modifiable ligand binding site

The extensive use of avidin and streptavidin in life sciences originates from the extraordinary tight biotin-binding affinity of these tetrameric proteins. Numerous studies have been performed to modify the biotin-binding affinity of (strept)avidin to improve the existing applications. Even so, (strept)avidin greatly favours its natural ligand, biotin. Here we engineered the biotin-binding pocket of avidin with a single point mutation S16C and thus introduced a chemically active thiol group, which could be covalently coupled with thiol-reactive molecules. This approach was applied to the previously reported bivalent dual chain avidin by modifying one binding site while preserving the other one intact. Maleimide was then coupled to the modified binding site resulting in a decrease in biotin affinity. Furthermore, we showed that this thiol could be covalently coupled to other maleimide derivatives, for instance fluorescent labels, allowing intratetrameric FRET. The bifunctional avidins described here provide improved and novel tools for applications such as the biofunctionalization of surfaces.     

Dual-affinity avidin molecules

A recently reported dual-chain avidin was modified further to contain two distinct, independent types of ligand-binding sites within a single polypeptide chain. Chicken avidin is normally a tetrameric glycoprotein that binds water-soluble d-biotin with extreme affinity (K(d) approximately 10(-15) M). Avidin is utilized in various applications and techniques in the life sciences and in the nanosciences. In a recent study, we described a novel avidin monomer-fusion chimera that joins two circularly permuted monomers into a single polypeptide chain. Two of these dual-chain avidins were observed to associate spontaneously to form a dimer equivalent to the wt tetramer. In the present study, we successfully used this scaffold to generate avidins in which the neighboring biotin-binding sites of dual-chain avidin exhibit two different affinities for biotin. In these novel avidins, one of the two binding sites in each polypeptide chain, the pseudodimer, is genetically modified to have lower binding affinity for biotin, whereas the remaining binding site still exhibits the high-affinity characteristic of the wt protein. The pseudotetramer (i.e., a dimer of dual-chain avidins) has two high and two lower affinity biotin-binding sites. The usefulness of these novel proteins was demonstrated by immobilizing dual-affinity avidin with its high-affinity sites. The sites with lower affinity were then used for affinity purification of a biotinylated enzyme. These "dual-affinity" avidin molecules open up wholly new possibilities in avidin-biotin technology, where they may have uses as novel bioseparation tools, carrier proteins, or nanoscale adapters.     

Ligand exchange between proteins. Exchange of biotin and biotin derivatives between avidin and streptavidin

We have studied the structural elements that affect ligand exchange between the two high affinity biotin-binding proteins, egg white avidin and its bacterial analogue, streptavidin. For this purpose, we have developed a simple assay based on the antipodal behavior of the two proteins toward hydrolysis of biotinyl p-nitrophenyl ester (BNP). The assay provided the experimental basis for these studies. It was found that biotin migrates unidirectionally from streptavidin to avidin. Conversely, the biotin derivative, BNP, is transferred in the opposite direction, from avidin to streptavidin. A previous crystallographic study (Huberman, T., Eisenberg-Domovich, Y., Gitlin, G., Kulik, T., Bayer, E. A., Wilchek, M., and Livnah, O. (2001) J. Biol. Chem. 276, 32031-32039) provided insight into a plausible explanation for these results. These data revealed that the non-hydrolyzable BNP analogue, biotinyl p-nitroanilide, was almost completely sheltered in streptavidin as opposed to avidin in which the disordered conformation of a critical loop resulted in the loss of several hydrogen bonds and concomitant exposure of the analogue to the solvent. In order to determine the minimal modification of the biotin molecule required to cause the disordered loop conformation, the structures of avidin and streptavidin were determined with norbiotin, homobiotin, and a common long-chain biotin derivative, biotinyl epsilon-aminocaproic acid. Six new crystal structures of the avidin and streptavidin complexes with the latter biotin analogues and derivatives were thus elucidated. It was found that extending the biotin side chain by a single CH(2) group (i.e. homobiotin) is sufficient to result in this remarkable conformational change in the loop of avidin. These results bear significant biotechnological importance, suggesting that complexes containing biotinylated probes with streptavidin would be more stable than those with avidin. These findings should be heeded when developing new drugs based on lead compounds because it is difficult to predict the structural and conformational consequences on the resultant protein-ligand interactions.     

Mild conditions for releasing mono and bis-biotinylated macromolecules from immobilized streptavidin

The high affinity (kd= approximately 10(-15)M) of streptavidin and avidin for biotin is key to a large number of biological applications and is essentially irreversible unless the complex is exposed to harsh conditions (e.g. heat (100 degrees C for 10 min)), detergents, and/or denaturants which damage macromolecules. Thus, high binding affinity becomes a disadvantage when a biotinylated target must be released for further processing. This work describes relatively mild conditions that release biotin and mono- and bis-biotinylated macromolecules from immobilized streptavidin on monodispersed magnetic beads.     

Affinity chromatography of DNA labeled with chemically cleavable biotinylated nucleotide analogs

DNA labeled with the chemically cleavable biotinylated nucleotide Bio-12-SS-dUTP was chromatographed on biotin cellulose affinity columns using either avidin or streptavidin as the affinity reagent. Although both proteins were equally effective in binding the Bio-12-SS-DNA to the affinity resin, two important differences were found. First, nonbiotinylated DNA bound to avidin, but not to streptavidin, in buffers containing 50 mM NaCl. Second, Bio-12-SS-DNA was released much more slowly from the streptavidin affinity column than from the avidin column upon washing with buffer containing dithiothreitol. This difficulty in reducing the disulfide bond of Bio-12-SS-DNA bound to streptavidin is most likely due to steric protection of the disulfide bond by the protein. This conclusion is supported by our finding that DNA labeled with another biotinylated nucleotide analog, Bio-19-SS-dUTP, is rapidly and efficiently recovered from a streptavidin column. In Bio-19-SS-DNA, the distance between the disulfide bond and the biotin group is approximately 10 A greater than that in Bio-12-SS-DNA. Therefore, Bio-19-SS-dUTP and streptavidin form the basis of an efficient affinity system for the isolation and subsequent recovery of biotinylated DNA in the presence of low ionic strength buffers.     

A plasmid expression system for quantitative in vivo biotinylation of thioredoxin fusion proteins in Escherichia coli.

The high affinity binding interaction of biotin to avidin or streptavidin has been used widely in biochemistry and molecular biology, often in sensitive protein detection or protein capture applications. However, in vitro chemical techniques for protein biotinylation are not always successful, with some common problems being a lack of reaction specificity, inactivation of amino acid residues critical for protein function and low levels of biotin incorporation. This report describes an improved expression system for the highly specific and quantitative in vivo biotinylation of fusion proteins. A short 'biotinylation peptide', described previously by Schatz, is linked to the N-terminus of Escherichia coli thioredoxin (TrxA) to form a new protein, called BIOTRX. The 'biotinylation peptide' serves as an in vivo substrate mimic for E. coli biotin holoenzyme synthetase (BirA), an enzyme which usually performs highly selective biotinylation of E.coli biotin carboxyl carrier protein (BCCP). A plasmid expression vector carrying the BIOTRX and birA genes arranged as a bacterial operon can be used to obtain high level production of soluble BIOTRX and BirA proteins and, under appropriate culture conditions, BIOTRX protein produced by this system is completely biotinylated. Fusions of BIOTRX to other proteins or peptides, whether these polypeptides are linked to the C-terminus or inserted into the BIOTRX active site loop, are also quantitatively biotinylated. Both types of BIOTRX fusion can be captured efficiently on avidin/streptavidin media for purification purposes or to facilitate interaction assays. We illustrate the utility of the system by measurements of antibody and soluble receptor protein binding to BIOTRX fusions immobilized on streptavidin-conjugated BIAcore chips.     

Design,production, and characterization of a monomeric streptavidin and its application for affinity purification of biotinylated proteins

To expand the application of the streptavidin-biotin technology for reversible affinity purification of biotinylated proteins, a novel form of monomeric streptavidin was engineered and produced using Bacillus subtilis as the expression host. By changing as little as two amino acid residues (T90 and D128) to alanine, the resulting mutant streptavidin designated DM3 was produced 100% in the monomeric form as a soluble functional protein via secretion. It remained in the monomeric state in the presence or absence of biotin. Interaction of purified monomeric streptavidin with biotin was studied by surface plasmon resonance-based BIAcore biosensor. Its on-rate is comparable to that of monomeric avidin while its off-rate is seven times lower. The dissociation constant was determined to be 1.3 x 10(-8)M. These properties make it an attractive agent for affinity purification of biotinylated proteins. An affinity matrix with immobilized DM3 mutein was prepared and applied to purify biotinylated cytochrome c from a crude extract. Biotinylated cytochrome c could be purified to homogeneity in one step and was shown to retain full biological activity. Advantages of using DM3 mutein over other traditional methods in the purification of biotinylated proteins are discussed.     

Identification and molecular characterisation of a biotin-binding protein distinct from avidin of chicken egg white and comparison with yolk biotin-binding protein

By immunological and biochemical methods a biotin-binding protein, distinct from avidin, has been shown to be present in chicken egg white. This vitamin-binding protein (Mr 67,000) bound [14C]biotin, displayed thermally induced biotin exchange reaction and exhibited gross immunological cross-reactivity with the purified yolk biotin-binding protein. In vitro labelling of soluble proteins with radioactive amino acids in the oviduct tissue explants from estrogenised chicks revealed that approx. 2% of the total radioactive proteins was immunoprecipitated with anti-yolk biotin-binding protein antibodies. The protein could be purified to homogeneity by employing ion-exchange chromatography on DEAE-cellulose and biotin-AH Sepharose affinity chromatography. The purified protein specifically bound [14C]biotin, and exhibited complete immunological homology with the yolk biotin-binding protein but not with avidin. Its electrophoretic mobility (at pH 8.3), acidic nature, biotin-binding characteristics, immunological cross-reactivity and tryptic peptide maps were very similar to that of yolk biotin-binding protein, and not avidin.     

Biochemical and Biological Characterization of a New Oxidized Avidin with Enhanced Tissue Binding Properties

Chicken avidin and bacterial streptavidin are widely employed in vitro for their capacity to bind biotin, but their pharmacokinetics and immunological properties are not always optimal, thereby limiting their use in medical treatments. Here we investigate the biochemical and biological properties of a new modified avidin, obtained by ligand-assisted sodium periodate oxidation of avidin. This method allows protection of biotin-binding sites of avidin from inactivation caused by the oxidation step and delay of avidin clearance from injected tissue by generation of aldehyde groups from avidin carbohydrate moieties. Oxidized avidin shows spectroscopic properties similar to that of native avidin, indicating that tryptophan residues are spared from oxidation damage. In strict agreement with these results, circular dichroism and isothermal titration calorimetry analyses confirm that the ligand-assisted oxidation preserves the avidin protein structure and its biotin binding capacity. In vitro cell binding and in vivo tissue residence experiments demonstrate that aldehyde groups provide oxidized avidin the property to bind cellular and interstitial protein amino groups through Schiff''s base formation, resulting in a tissue half-life of 2 weeks, compared with 2 h of native avidin. In addition, the efficient uptake of the intravenously injected ¹¹¹In-BiotinDOTA (ST2210) in the site previously treated with modified avidin underlines that tissue-bound oxidized avidin retains its biotin binding capacity in vivo. The results presented here indicate that oxidized avidin could be employed to create a stable artificial receptor in diseased tissues for the targeting of biotinylated therapeutics.     

Avidin-induced lysis of biotinylated erythrocytes by homologous complement via the alternative pathway depends on avidin's ability of multipoint binding with biotinylated membrane.

It was reported that avidin and streptavidin induce lysis of prebiotinylated red blood cells via the alternative pathway of both homologous and heterologous complement. Both of these proteins have four biotin-binding sites, providing a polyvalent interaction with biotinylated components of the erythrocyte membrane. We have compared the effects of mono- and multipoint avidin attachment on the sensitivity of biotinylated erythrocytes to lysis by the complement system. In the presence of anti-avidin antibody, avidin-bearing biotinylated erythrocytes were rapidly lysed by heterologous serum. This lysis was independent from the mode of avidin attachment, implying that complement activation by the classical pathway triggered by interaction between C1 and avidin-bound antibody on the erythrocyte surface is independent from the avidin's ability of polyvalent (multipoint) binding with biotinylated membrane components. In the absence of anti-avidin antibody, biotinylated erythrocytes bearing polyvalently attached avidin were lysed by homologous complement better than cells bearing avidin, which possesses reduced ability for multipoint binding with biotinylated erythrocyte. Two independent approaches to reduce avidin's ability of multipoint binding were used: decrease in surface density of biotin on the erythrocyte membrane and blockage of biotin-binding sites of avidin. Both methods result in reduced lysis of avidin-bearing erythrocytes as compared with erythrocytes bearing an equal amount of polyvalent-bound avidin. Thus the activation of homologous complement via the alternative pathway depends on avidin's ability to 'cross-link' to the biotinylated components of the erythrocyte membrane.     

Studies on the biotin-binding sites of avidin and streptavidin. A chemically induced dynamic nuclear polarization investigation of the status of tyrosine residues.

We applied the protein photochemically induced dynamic nuclear polarization (photo-c.i.d.n.p.) method to explore the conformation of the side chains of tyrosine, tryptophan and histidine residues in three biotin-binding proteins. The c.i.d.n.p. spectra of avidin, streptavidin and 'core' streptavidin were compared with those of their complexes with biotin and its derivatives. The data indicate that the single tyrosine residue (Tyr-33) of avidin is clearly inaccessible to the triplet flavin photo-c.i.d.n.p. probe. The same holds for all tryptophan and histidine side chains. Although the analogous Tyr-43 residue of streptavidin is also buried, at least three of the other tyrosine residues of this protein are exposed. The same conclusions apply to the truncated form of the protein, core streptavidin. As judged by the photo-c.i.d.n.p. results, complexing of avidin and streptavidin with biotin, N-epsilon-biotinyl-L-lysine (biocytin) or biotinyltyrosine has little or no effect on tyrosine accessibility in these proteins. Biotinyltyrosine can be used to probe the depth of the corresponding binding site. The accessibility of the tyrosine side chain of biotinyltyrosine in the complex demonstrates the exquisite fit of the biotin-binding cleft of avidin: only the biotin moiety appears to be accommodated, leaving the tyrosine side chain exposed.     

A monovalent streptavidin with a single femtomolar biotin binding site

Streptavidin and avidin are used ubiquitously because of the remarkable affinity of their biotin binding, but they are tetramers, which disrupts many of their applications. Making either protein monomeric reduces affinity by at least 10(4)-fold because part of the binding site comes from a neighboring subunit. Here we engineered a streptavidin tetramer with only one functional biotin binding subunit that retained the affinity, off rate and thermostability of wild-type streptavidin. In denaturant, we mixed a streptavidin variant containing three mutations that block biotin binding with wild-type streptavidin in a 3:1 ratio. Then we generated monovalent streptavidin by refolding and nickel-affinity purification. Similarly, we purified defined tetramers with two or three biotin binding subunits. Labeling of site-specifically biotinylated neuroligin-1 with monovalent streptavidin allowed stable neuroligin-1 tracking without cross-linking, whereas wild-type streptavidin aggregated neuroligin-1 and disrupted presynaptic contacts. Monovalent streptavidin should find general application in biomolecule labeling, single-particle tracking and nanotechnology.     

Bradavidin II from Bradyrhizobium japonicum: a new avidin-like biotin-binding protein

A gene encoding an avidin-like protein was discovered in the genome of B. japonicum. The gene was cloned to an expression vector and a protein, named bradavidin II, was produced in E. coli. Bradavidin II has an identity of 20-30% and a similarity of 30-40% with previously discovered bradavidin and other avidin-like proteins. It has biochemical characteristics close to those of avidin and streptavidin and binds biotin tightly. In contrast to other tetrameric avidin-like proteins studied to date, bradavidin II has no tryptophan analogous to the W110 in avidin (W120 in streptavidin), thought to be one of the most essential residues for tight biotin-binding. Homology modeling suggests that a proline residue may function analogously to tryptophan in this particular position. Structural elements of bradavidin II such as an interface residue pattern or biotin contact residues could be used as such or transferred to engineered avidin forms to improve or create new tools for biotechnological applications.     

Genetic engineering of streptavidin,a versatile affinity tag

Streptavidin, a tetrameric protein produced by Streptomyces avidinii, has been used as a useful, versatile affinity tag in a variety of biological applications. The efficacy of streptavidin is derived from its extremely high binding affinity for the vitamin biotin. For the last several years, we have used genetic engineering as a primary means to enhance the properties of streptavidin and to expand the application of streptavidin as an affinity tag. In this review, we describe several genetically engineered streptavidin variants, which include a streptavidin with a reduced biotin-binding affinity, a dimeric streptavidin, and a fusion protein between streptavidin and protein A, along with their potential applications in biological science.     

Applications of a peptide ligand for streptavidin: the Strep-tag

The Strep-tag constitutes a nine amino acid-peptide that binds specifically to streptavidin and occupies the same pocket where biotin is normally complexed. Since the Strep-tag participates in a reversible interaction it can be applied for the efficient purification of corresponding fusion proteins on affinity columns with immobilized streptavidin. Elution of the bound recombinant protein can be effected under mild buffer conditions by competition with biotin or a suitable derivative. In addition, Strep-tag fusion proteins can be easily detected in immunochemical assays, like Western blots or ELISAs, by means of commercially available streptavidin-enzyme conjugates. The Strep-tag/streptavidin system has been systematically optimized over the past years, including the engineering of streptavidin itself. Structural insight into the molecular mimicry between the peptide and biotin was furthermore gained from X-ray crystallographic analysis. As a result the system provides a reliable and versatile tool in recombinant protein chemistry. Exemplary applications of the Strep-tag are discussed in this review.     

Expression,Isolation, and Purification of Soluble and Insoluble Biotinylated Proteins for Nerve Tissue Regeneration

Recombinant protein engineering has utilized Escherichia coli (E. coli) expression systems for nearly 4 decades, and today E. coli is still the most widely used host organism. The flexibility of the system allows for the addition of moieties such as a biotin tag (for streptavidin interactions) and larger functional proteins like green fluorescent protein or cherry red protein. Also, the integration of unnatural amino acids like metal ion chelators, uniquely reactive functional groups, spectroscopic probes, and molecules imparting post-translational modifications has enabled better manipulation of protein properties and functionalities. As a result this technique creates customizable fusion proteins that offer significant utility for various fields of research. More specifically, the biotinylatable protein sequence has been incorporated into many target proteins because of the high affinity interaction between biotin with avidin and streptavidin. This addition has aided in enhancing detection and purification of tagged proteins as well as opening the way for secondary applications such as cell sorting. Thus, biotin-labeled molecules show an increasing and widespread influence in bioindustrial and biomedical fields. For the purpose of our research we have engineered recombinant biotinylated fusion proteins containing nerve growth factor (NGF) and semaphorin3A (Sema3A) functional regions. We have reported previously how these biotinylated fusion proteins, along with other active protein sequences, can be tethered to biomaterials for tissue engineering and regenerative purposes. This protocol outlines the basics of engineering biotinylatable proteins at the milligram scale, utilizing  a T7 lac inducible vector and E. coli expression hosts, starting from transformation to scale-up and purification.