Biological inactivation of adhering Listeria monocytogenes by listeriaphages and a quaternary ammonium compound.

The use of listeriaphages as a means of disinfecting contaminated stainless-steel and polypropylene surfaces was investigated. Surfaces artificially contaminated with L. monocytogenes 10401 and 8427 were sanitized with suspensions of listeriaphages (H387, H387-A, and 2671), all belonging to the Siphoviridae family. Phage suspensions at concentrations of up to 3.5 x 10(8) PFU/ml were at least as efficient as a 20 ppm solution of a quaternary ammonium compound (QUATAL) in reducing L. monocytogenes populations. A synergistic activity was observed when two or more phages were used in combination and when phages were suspended in QUATAL. The biological activity of the three phages was not affected by QUATAL concentrations of 50 ppm and a contact time of 4 h.     

Neutralisation of the antibacterial action of quaternary ammonium compounds with cyclodextrins

Abstract Cyclodextrins can be used to inactivate the antimicrobial activity of quaternary ammonium biocides. Their use offers several advantages over other methods which employ non-ionic detergents or phospholipids.     

Quantitation and purification of quaternary ammonium compounds from halophyte tissue

A simple and sensitive spectrophotometric assay for quaternary ammonium compounds (QACs) based on Dragendorff's reagent is described. Although not specific for a particular QAC, the assay allows for rapid survey of tissue for QAC content. A separation method for QACs in halophyte tissue containing high levels of cations was developed using ion exchange resins and ninhydrin to remove the amino acid fraction.     

Resistance of Staphylococcus aureus strains to quaternary ammonium compounds and chlorhexidine

The level of susceptibility of 90 different Staphylococcus aureus strains to chosen quaternary ammonium compounds: cetyltrimethyl ammonium bromide, benzalkonium chloride and benzethonium chloride as well as to chlorhexidine digluconate were examined. The examined strains consist of three groups: hospital originated MRSA, hospital originated MSSA and non-hospital MSSA. The significant differences between these groups were observed in they susceptibility to the investigated disinfectants. The obtained MIC values showed that the most resistant were hospital MRSA strains, where 55% was estimated as resistant to cetyltrimethyl ammonium bromide, 72% were resistant to benzalkonium chloride and benzethonium chloride and 7% were resistant to chlorhexidine digluconate. Among hospital originated MSSA 3% of strains were resistant to cetyltrimethyl ammonium bromide and 6% were resistant to benzalkonium chloride and benzethonium chloride. 14% non-hospital S. aureus strains were resistant to benzalkonium chloride and benzethonium chloride. None were resistant to chlorhexidine digluconate or cetyltrimethyl ammonium bromide.     

Tumor-specific hybrid polyhydroxybutyrate nanoparticle: surface modification of nanoparticle by enzymatically synthesized functional block copolymer

A new approach to functionalize the surface of hydrophobic nanocarrier through enzymatic polymerization was demonstrated. The effective coupling between the hydrophobic surface of PHB nanoparticle and PHB chain grown from the enzyme fused with a specific ligand provided a simple way of functionalizing nanoparticles with active protein layers in aqueous environment. PHB nanoparticles loaded with model drug molecule, Nile red, were prepared through oil-in-water emulsion solvent evaporation method and the surface of nanoparticles were functionalized with tumor-specific ligand, RGD4C, fused with PHA synthase that drove the coupling reaction. The functionalized PHB nanoparticles showed a specific affinity to MDA-MB 231 breast cancer cells indicating that the tumor-specific ligand, RGD4C, was effectively displayed on the surface of PHB nanoparticles through enzymatic modification and confers targeting capability on the drug carrier.     

Molecular modeling of surface modification of Wyoming and Cheto montmorillonite by methylene blue

The surface area of various types of montmorillonites (MMT) with different values of layer charge plays a very important role in surface arrangement of methylene blue cations (MB). Photoluminescence measurements can be strongly or partially influenced by this surface arrangement of cations. For these reasons and on the basis of our previous results, molecular simulations were performed for various types of montmorillonites covered with methylene blue cations. Adsorption of methylene blue cations on Na-Wyoming MMT surface is different from Ca-Cheto MMT. In the case of Wyoming with a lower layer charge, MB cations lie parallel to the silicate layer for all investigated samples. On the other hand, Cheto surface is covered with a higher amount of MB cations. The results obtained from molecular modeling indicate that MB lies parallel to low loading case and become tilted with respect to layer for a higher loading. Moreover, a higher amount of MB cations covering the silicate layer are much less energy-stable. A higher loading of MB cations leads to aggregates but at low loading MB cations degrade to monomers.     

Possible mechanism of long-term anti-arrhythmia and local anesthetic effect of quaternary ammonium compounds

In experiments with dialized neurons of L. stagnalis mollusc the recovery of Na-current (INa) after its depression by local anesthetic trimecaine and its quaternary derivative N-ethyltrimecaine (G-88) was studied. A full recovery of INa within tens of seconds after washing off trimecaine but not G-88 was observed. The half-time for vanishing of INa use-dependent depression by G-88 was 17 minutes, and there was no substantial vanishing of tonic INa block even after an hour of G-88 washing off. A hypothesis is advanced that the long recovery time of INa is one of the mechanisms providing long pharmacological action of quaternary antiarrhythmic and local anesthetic ammonium compounds.     

Interaction of infectious viral particles with a quaternary ammonium chlorid (QAC) surface

The antiviral activity of a surface-bonded quaternary ammonium chloride (QAC) was examined in this study. The mechanism of inactivation was elucidated by a combination of infectivity assay, radioactive labeling assay, and sedimentation analysis. Although the virions are still infectious when attached onto the chemically modified surface, we found these viruses are inactivated if they are eluted from the surface. The inactivation is caused by the disruption of the viral envelope with subsequent release of the nucleocapsid. No evidence indicates the released nucleocapsid is further disrupted. An enveloped virus shows a much higher affinity for the QAC-treated surface than a nonenveloped one due to hydrophobic interaction. The QAC-treated beads can effectively remove the enveloped viruses at low protein concentrations. The titer of herpes simplex virus was reduced by a factor of nearly 5 logarithm units in a 0.5 wt % bovine serum albumin solution with less that 10% protein loss. However, the presence of proteins in the solution reduced both the rate and capacity of this nonspecific adsorption-inactivation process. As a consequence, the removal efficiency is relatively poor in solutions with high protein content.     

The effect of quaternary ammonium compounds and amine oxides on spores of bacillus cereus

The effect of 1-dodecylpiperidine 1-oxide and N,N’-bis(dodecyldimethyl)-1,2-ethane diammonium dibromide on the spores ofBacillus cereus. particularly their binding to intact spores and spores with reduced cystine bonds, was investigated. The Langmuir type of binding is involved in both cases. Both compounds decreased the thermoresistance of spores. DPNO decreased the fraction of non-germinating spores, the effect of the drug increasing with increasing concentration. This phenomenon was associated with a faster release of dipicolinic acid to the medium. Only microgermination proceeded in the presence of BDED and dipicolinic acid was released only in substantially lower amounts. Both compounds also influenced respiration.     

Evaluation of antimicrobial interactions between chlorhexidine, quaternary ammonium compounds, preservatives and excipients

The antimicrobial interactions of 49 combinations of chlorhexidine, quaternary ammonium compounds, preservatives and excipients were evaluated by the method of Berenbaum and the checkerboard titration method, with Staphylococcus aureus CIP 53154 and Escherichia coli CIP 54127 as test strains. MIC determinations were carried out as a preliminary step, and relative growth intensity was used to describe the bacteriostatic activity of surface-active agents (Amonyl 380 BA®, Amonyl 671 SB®). In the study of combinations, results were interpreted with Fractional Inhibitory Concentration indexes and represented by isobolograms. A fair correlation was shown between the method of Berenbaum and the checkerboard titration method. Combinations between chlorhexidine, cetrimonium bromide and benzalkonium chloride were synergistic or additive; combinations of antiseptics and preservatives were generally not antagonistic. The methods were also well adapted to the study of interactions involving surface-active agents, a critical problem in the formulation of topical antimicrobial agents.