Quantitative trait loci affecting survival and fertility-related traits in Caenorhabditis elegans show genotype-environment interactions, pleiotropy and epistasis.

We have identified, using composite interval mapping, quantitative trait loci (QTL) affecting a variety of life history traits (LHTs) in the nematode Caenorhabditis elegans. Using recombinant inbred strains assayed on the surface of agar plates, we found QTL for survival, early fertility, age of onset of sexual maturity, and population growth rate. There was no overall correlation between survival on solid media and previous measures of survival in liquid media. Of the four survival QTL found in these two environments, two have genotype-environment interactions (GEIs). Epistatic interactions between markers were detected for four traits. A multiple regression approach was used to determine which single markers and epistatic interactions best explained the phenotypic variance for each trait. The amount of phenotypic variance accounted for by genetic effects ranged from 13% (for internal hatching) to 46% (for population growth). Epistatic effects accounted for 9-11% of the phenotypic variance for three traits. Two regions containing QTL that affected more than one fertility-related trait were found. This study serves as an example of the power of QTL mapping for dissecting the genetic architecture of a suite of LHTs and indicates the potential importance of environment and GEIs in the evolution of this architecture.     

Pleiotropic quantitative trait loci contribute to population divergence in traits associated with life-history variation in Mimulus guttatus

Evolutionary biologists seek to understand the genetic basis for multivariate phenotypic divergence. We constructed an F2 mapping population (N = 539) between two distinct populations of Mimulus guttatus. We measured 20 floral, vegetative, and life-history characters on parents and F1 and F2 hybrids in a common garden experiment. We employed multitrait composite interval mapping to determine the number, effect, and degree of pleiotropy in quantitative trait loci (QTL) affecting divergence in floral, vegetative, and life-history characters. We detected 16 QTL affecting floral traits; 7 affecting vegetative traits; and 5 affecting selected floral, vegetative, and life-history traits. Floral and vegetative traits are clearly polygenic. We detected a few major QTL, with all remaining QTL of small effect. Most detected QTL are pleiotropic, implying that the evolutionary shift between these annual and perennial populations is constrained. We also compared the genetic architecture controlling floral trait divergence both within (our intraspecific study) and between species, on the basis of a previously published analysis of M. guttatus and M. nasutus. Eleven of our 16 floral QTL map to approximately the same location in the interspecific map based on shared, collinear markers, implying that there may be a shared genetic basis for floral divergence within and among species of Mimulus.     

Does fructan have a functional role in physiological traits? Investigation by quantitative trait locus mapping

* The role of fructan in growth and drought-stress responses of perennial ryegrass (Lolium perenne) was investigated in an F(2) mapping family that segregates for carbohydrate metabolism. * A quantitative trait locus approach was used to compare the genetic control of traits. * Growth and drought-stress traits were extremely variable within the family. Most traits had high broad-sense heritability. Quantitative trait loci (QTL) were identified for most traits; the maximum number of QTL per trait was four. Between 11% and 75% of total phenotypic variation was explained. Few growth-trait QTL coincided with previously identified fructan QTL. A cluster of drought-trait QTL was close to two previously identified regions of the genome with tiller base fructan QTL in repulsion. * The high sugar parent contributed few alleles that increased 'reserve-driven' growth or performance during drought-stress. Correlation of growth and drought-stress traits with fructan content was low and increasing fructan content per se would not appear to improve drought resistance. Complex patterns of carbohydrate partitioning and metabolism within the cell may explain contradictory relationships between carbohydrate content and growth/stress-resistance traits.     

Quantitative trait loci for floral morphology in Arabidopsis thaliana

A central question in biology is how genes control the expression of quantitative variation. We used statistical methods to estimate genetic variation in eight Arabidopsis thaliana floral characters (fresh flower mass, petal length, petal width, sepal length, sepal width, long stamen length, short stamen length, and pistil length) in a cosmopolitan sample of 15 ecotypes. In addition, we used genome-wide quantitative trait locus (QTL) mapping to evaluate the genetic basis of variation in these same traits in the Landsberg erecta x Columbia recombinant inbred line population. There was significant genetic variation for all traits in both the sample of naturally occurring ecotypes and in the Ler x Col recombinant inbred line population. In addition, broad-sense genetic correlations among the traits were positive and high. A composite interval mapping (CIM) analysis detected 18 significant QTL affecting at least one floral character. Eleven QTL were associated with several floral traits, supporting either pleiotropy or tight linkage as major determinants of flower morphological integration. We propose several candidate genes that may underlie these QTL on the basis of positional information and functional arguments. Genome-wide QTL mapping is a promising tool for the discovery of candidate genes controlling morphological development, the detection of novel phenotypic effects for known genes, and in generating a more complete understanding of the genetic basis of floral development.     

Dissecting the regulation of fructan metabolism in perennial ryegrass (Lolium perenne) with quantitative trait locus mapping

Quantitative trait locus (QTL) mapping, which can be a useful tool for dissecting complex traits, has been used here to study the regulation of fructan metabolism in temperate forage grasses. An F2 mapping family, derived from a high water-soluble carbohydrate (WSC) x low WSC cross, was used to map fructans and the other components of WSC (sucrose, glucose and fructose) in leaves and tiller bases of perennial ryegrass (Lolium perenne) in spring and autumn. To characterize regions of the genome that control basic carbohydrate metabolism, a strategy to minimize the impact of genotype (G) x environment (E), and E-effects on the characterization of G-effects, was adopted. Most traits were highly variable within the family. There was also considerable year-to-year environmental variation. However, significant genetic effects were detected, and several traits had high broad-sense heritability. QTL were identified on chromosomes 1, 2, 5 and 6. Leaf and tiller base QTL did not coincide. Individual QTL explained between 8 and 59% of the total phenotypic variation in the traits. Fructan turnover, metabolism and their genetic control, and the effect of environment, are discussed in the context of the results.     

Genetic Mapping of Quantitative Trait Loci Controlling Growth and Wood Quality Traits in Eucalyptus Grandis Using a Maternal Half-Sib Family and Rapd Markers

Quantitative trait loci (QTL) mapping of forest productivity traits was performed using an open pollinated half-sib family of Eucalyptus grandis. For volume growth, a sequential QTL mapping approach was applied using bulk segregant analysis (BSA), selective genotyping (SG) and cosegregation analysis (CSA). Despite the low heritability of this trait and the heterogeneous genetic background employed for mapping. BSA detected one putative QTL and SG two out of the three later found by CSA. The three putative QTL for volume growth were found to control 13.7% of the phenotypic variation, corresponding to an estimated 43.7% of the genetic variation. For wood specific gravity five QTL were identified controlling 24.7% of the phenotypic variation corresponding to 49% of the genetic variation. Overlapping QTL for CBH, WSG and percentage dry weight of bark were observed. A significant case of digenic epistasis was found, involving unlinked QTL for volume. Our results demonstrate the applicability of the within half-sib design for QTL mapping in forest trees and indicate the existence of major genes involved in the expression of economically important traits related to forest productivity in Eucalyptus grandis. These findings have important implications for marker-assisted tree breeding.     

Quantitative trait locus mapping of yield-related components and oligogenic control of the cap color of the button mushroom, Agaricus bisporus

As in other crops, yield is an important trait to be selected for in edible mushrooms, but its inheritance is poorly understood. Therefore, we have investigated the complex genetic architecture of yield-related traits in Agaricus bisporus through the mapping of quantitative trait loci (QTL), using second-generation hybrid progeny derived from a cross between a wild strain and a commercial cultivar. Yield, average weight per mushroom, number of fruiting bodies per m(2), earliness, and cap color were evaluated in two independent experiments. A total of 23 QTL were detected for 7 yield-related traits. These QTL together explained between 21% (two-flushes yield) and 59% (earliness) of the phenotypic variation. Fifteen QTL (65%) were consistent between the two experiments. Four regions underlying significant QTL controlling yield, average weight, and number were detected on linkage groups II, III, IV, and X, suggesting a pleiotropic effect or tight linkage. Up to six QTL were identified for earliness. The PPC1 locus, together with two additional genomic regions, explained up to 90% of the phenotypic variation of the cap color. Alleles from the wild parent showed beneficial effects for some yield traits, suggesting that the wild germ plasm is a valuable source of variation for several agronomic traits. Our results constitute a key step toward marker-assisted selection and provide a solid foundation to go further into the biological mechanisms controlling productive traits in the button mushroom.     

Mapping quantitative trait loci for bean traits and ovule number in Theobroma cacao L.

Quantitative trait loci (QTL) mapping for bean traits and the number of ovules per ovary was carried out in cocoa (Theobroma cacao L.) using three test-cross progenies derived from crosses between a lower Amazon Forastero male parent (Catongo) and three female parents: one upper Amazon Forastero (IMC78) and two Trinitario (DR1 and S52). RFLP (restriction fragment length polymorphism), microsatellite, and AFLP (amplified fragment lengthpolymorphism) markers were used for mapping. Between one and six QTL for bean traits (length, weight, and shape index) and one and four QTL for the number of ovules per ovary were detected using composite interval mapping (CIM). Individual QTL explained between 5 and 24% of the phenotypic variation. QTL clusters were identified on several chromosomes, but particularly on chromosome 4. QTL related to bean traits were detected in the same region in both Trinitario parents and in a close region in the upper Amazon Forastero parent. In reference to a previous diversity study where alleles specific to Criollo and Forastero genotypes were identified, it was possible to speculate on the putative origin (Criollo or Forastero) of favorable QTL alleles segregating in both Trinitario studied.     

Quantitative trait loci for fertility traits in Finnish Ayrshire cattle

A whole genome scan was carried out to detect quantitative trait loci (QTL) for fertility traits in Finnish Ayrshire cattle. The mapping population consisted of 12 bulls and 493 sons. Estimated breeding values for days open, fertility treatments, maternal calf mortality and paternal non-return rate were used as phenotypic data. In a granddaughter design, 171 markers were typed on all 29 bovine autosomes. Associations between markers and traits were analysed by multiple marker regression. Multi-trait analyses were carried out with a variance component based approach for the chromosomes and trait combinations, which were observed significant in the regression method. Twenty-two chromosome-wise significant QTL were detected. Several of the detected QTL areas were overlapping with milk production QTL previously identified in the same population. Multi-trait QTL analyses were carried out to test if these effects were due to a pleiotropic QTL affecting fertility and milk yield traits or to linked QTL causing the effects. This distinction could only be made with confidence on BTA1 where a QTL affecting milk yield is linked to a pleiotropic QTL affecting days open and fertility treatments.     

Identification of quantitative trait loci for agronomically important traits and their association with genic-microsatellite markers in sorghum

The identification of quantitative trait loci (QTLs) affecting agronomically important traits enable to understand their underlying genetic mechanisms and genetic basis of their complex interactions. The aim of the present study was to detect QTLs for 12 agronomic traits related to staygreen, plant early development, grain yield and its components, and some growth characters by analyzing replicated phenotypic datasets from three crop seasons, using the population of 168 F₇ RILs of the cross 296B × IS18551. In addition, we report mapping of a subset of genic-microsatellite markers. A linkage map was constructed with 152 marker loci comprising 149 microsatellites (100 genomic- and 49 genic-microsatellites) and three morphological markers. QTL analysis was performed by using MQM approach. Forty-nine QTLs were detected, across environments or in individual environments, with 1–9 QTLs for each trait. Individual QTL accounted for 5.2–50.4% of phenotypic variance. Several genomic regions affected multiple traits, suggesting the phenomenon of pleiotropy or tight linkage. Stable QTLs were identified for studied traits across different environments, and genetic backgrounds by comparing the QTLs in the study with previously reported QTLs in sorghum. Of the 49 mapped genic-markers, 18 were detected associating either closely or exactly as the QTL positions of agronomic traits. EST marker Dsenhsbm19, coding for a key regulator (EIL-1) of ethylene biosynthesis, was identified co-located with the QTLs for plant early development and staygreen trait, a probable candidate gene for these traits. Similarly, such exact co-locations between EST markers and QTLs were observed in four other instances. Collectively, the QTLs/markers identified in the study are likely candidates for improving the sorghum performance through MAS and map-based gene isolations.     

Mapping quantitative trait loci for longitudinal traits in line crosses

Quantitative traits whose phenotypic values change over time are called longitudinal traits. Genetic analyses of longitudinal traits can be conducted using any of the following approaches: (1) treating the phenotypic values at different time points as repeated measurements of the same trait and analyzing the trait under the repeated measurements framework, (2) treating the phenotypes measured from different time points as different traits and analyzing the traits jointly on the basis of the theory of multivariate analysis, and (3) fitting a growth curve to the phenotypic values across time points and analyzing the fitted parameters of the growth trajectory under the theory of multivariate analysis. The third approach has been used in QTL mapping for longitudinal traits by fitting the data to a logistic growth trajectory. This approach applies only to the particular S-shaped growth process. In practice, a longitudinal trait may show a trajectory of any shape. We demonstrate that one can describe a longitudinal trait with orthogonal polynomials, which are sufficiently general for fitting any shaped curve. We develop a mixed-model methodology for QTL mapping of longitudinal traits and a maximum-likelihood method for parameter estimation and statistical tests. The expectation-maximization (EM) algorithm is applied to search for the maximum-likelihood estimates of parameters. The method is verified with simulated data and demonstrated with experimental data from a pseudobackcross family of Populus (poplar) trees.     

玉米杂交种掖单13号的SSR连锁图谱构建与叶夹角和叶向值的QTL定位与分析

为了增加单位面积产量, 玉米育种者已经开始了更密植更紧凑株型的选育。叶夹角和叶向值是评价玉米株型的重要指标。本研究以掖478×丹340的500个F2单株为作图群体, 构建了具有138个位点的SSR标记连锁图谱, 图谱总长度为1 394.9 cM, 平均间距10.1 cM。利用397个F2：3家系对叶夹角和叶向值进行QTL定位分析, 结果表明: 叶夹角和叶向值分别检测到6和8个QTL, 累计解释表型变异41.0%和60.8%, 单个QTL的贡献率在2.9%~13.6%之间。与叶夹角和叶向值有关的基因主要作用方式为加性和部分显性。此外两个性状共检测到9对上位性互作位点, 表明上位性互作在叶夹角和叶向值的遗传中也起较重要的作用。     

Multiple interval mapping for quantitative trait loci.

A new statistical method for mapping quantitative trait loci (QTL), called multiple interval mapping (MIM), is presented. It uses multiple marker intervals simultaneously to fit multiple putative QTL directly in the model for mapping QTL. The MIM model is based on Cockerham's model for interpreting genetic parameters and the method of maximum likelihood for estimating genetic parameters. With the MIM approach, the precision and power of QTL mapping could be improved. Also, epistasis between QTL, genotypic values of individuals, and heritabilities of quantitative traits can be readily estimated and analyzed. Using the MIM model, a stepwise selection procedure with likelihood ratio test statistic as a criterion is proposed to identify QTL. This MIM method was applied to a mapping data set of radiata pine on three traits: brown cone number, tree diameter, and branch quality scores. Based on the MIM result, seven, six, and five QTL were detected for the three traits, respectively. The detected QTL individually contributed from approximately 1 to 27% of the total genetic variation. Significant epistasis between four pairs of QTL in two traits was detected, and the four pairs of QTL contributed approximately 10.38 and 14.14% of the total genetic variation. The asymptotic variances of QTL positions and effects were also provided to construct the confidence intervals. The estimated heritabilities were 0.5606, 0.5226, and 0. 3630 for the three traits, respectively. With the estimated QTL effects and positions, the best strategy of marker-assisted selection for trait improvement for a specific purpose and requirement can be explored. The MIM FORTRAN program is available on the worldwide web (http://www.stat.sinica.edu.tw/chkao/).     

Quantitative trait loci controlling phenotypes related to the perennial versus annual habit in wild relatives of maize

We used quantitative trait locus/loci (QTL) mapping to study the inheritance of traits associated with perennialism in a cross between an annual (Zea mays ssp. parviglumis) and a perennial (Z. diploperennis) species of teosinte. The most striking difference between these species is that Z. diploperennis forms rhizomes, whereas Z. mays ssp. parviglumis lacks these over-wintering underground stems. An F₂ population of 425 individuals was genotyped at 95 restriction fragment length polymorphism marker loci and the association between phenotype and genotype was analyzed by composite interval mapping. We detected a total of 38 QTL for eight traits. The number of QTL found for each trait ranged from two for rhizome formation to nine for tillering. QTL for six of the traits mapped near each other on chromosome 2, and QTL for four traits mapped near each other on chromosome 6, suggesting that these regions play an important role in the evolution of the perennial habit in teosinte. Most of the 38 QTL had small effects, and no single QTL showed a strikingly large effect. The map positions that we determined for rhizome formation and other traits in teosinte may help to locate corresponding QTL in pasture and turf grasses used as forage for cattle and for erosion control in agro-ecosystems.     

Effectiveness of selective genotyping for detection of quantitative trait loci: an analysis of grain and malt quality traits in three barley populations.

Marker genotype data and grain and malt quality phenotype data from three barley (Hordeum vulgare L.) mapping populations were used to investigate the feasibility of selective genotyping for detection of quantitative trait loci (QTLs). With selective genotyping, only individuals with high and low phenotypic values for the trait of interest are genotyped. Here, genotyping of 10 to 70% of each population (i.e., 5 to 35% in each tail of the phenotypic distribution) was considered. Genomic positions detected by selective genotyping were compared to QTL position estimates from interval mapping analysis using marker genotype data from the entire population. Selective genotyping reliably detected almost all of the mapped QTLs, often with only 10% of the population genotyped. Selective genotyping also detected spurious QTLs in regions of the genome where no significant QTL had been mapped. Even with additional genotyping to verify putative QTLs, the total genotyping effort for detection of QTLs for a single trait by selective genotyping was usually less than 30% of that required for conventional interval mapping. Simultaneous investigation of two or more traits by selective genotyping would require additional genotyping effort, but could still be worthwhile.     

水稻穗部性状的QTL与环境互作分析

分别在两年收集珍汕97／明恢63的重组自交系群体的表现数据,运用混合线性模型的QTL定位方法,联合分析穗部5个性状的QTLs7及QTL与环境互作关系。每穗颖花数、每穗实粒数、结实率、穗长和穗着密度分别检测到10、3、6、8和7个QTLs分别解释各性状变异的29．13％、19．2％、29．46％、26．39％和35．76％。对于同一性状,高值亲本和低值亲本中均存在增效和减效QTL。相关性状QTL的位置表现相同或相似,高值亲本和低值亲本中均存在增效和减效QTL。相关性状QTL的位置表现相同或相似,成族分布。1个穗长QTL,2个每穗颖花数QTL3,3个结实率QTLs表现与环境显著互作,QTL与环境互作效应的贡献率比相应的QTL贡献率略大。遗传力稍高的每穗实粒数和穗着粒密度的DQTL与环境不互作。     

A statistical model for testing the pleiotropic control of phenotypic plasticity for a count trait

The differences of a phenotypic trait produced by a genotype in response to changes in the environment are referred to as phenotypic plasticity. Despite its importance in the maintenance of genetic diversity via genotype-by-environment interactions, little is known about the detailed genetic architecture of this phenomenon, thus limiting our ability to predict the pattern and process of microevolutionary responses to changing environments. In this article, we develop a statistical model for mapping quantitative trait loci (QTL) that control the phenotypic plasticity of a complex trait through differentiated expressions of pleiotropic QTL in different environments. In particular, our model focuses on count traits that represent an important aspect of biological systems, controlled by a network of multiple genes and environmental factors. The model was derived within a multivariate mixture model framework in which QTL genotype-specific mixture components are modeled by a multivariate Poisson distribution for a count trait expressed in multiple clonal replicates. A two-stage hierarchic EM algorithm is implemented to obtain the maximum-likelihood estimates of the Poisson parameters that specify environment-specific genetic effects of a QTL and residual errors. By approximating the number of sylleptic branches on the main stems of poplar hybrids by a Poisson distribution, the new model was applied to map QTL that contribute to the phenotypic plasticity of a count trait. The statistical behavior of the model and its utilization were investigated through simulation studies that mimic the poplar example used. This model will provide insights into how genomes and environments interact to determine the phenotypes of complex count traits.     

QTL for fibre-related traits in grain × sweet sorghum as a tool for the enhancement of sorghum as a biomass crop

Compared to maize and temperate grasses, sorghum has received less attention in terms of improving cell wall components. The objectives of this study were to identify quantitative trait loci (QTL) with main effects, epistatic and pleiotropic effects along with QTL × environment (QE) interactions controlling fibre-related traits in sorghum. Neutral detergent fibre (NDF), acid detergent fibre (ADF), acid detergent lignin (ADL), cellulose, hemicellulose, fresh leaf mass, stripped stalk mass, dry stalk mass, fresh biomass and dry biomass were analysed from a population of 188 grain × sweet sorghum recombinant inbred lines. A genetic map consisting of 157 DNA markers was constructed, and QTL were detected using composite interval mapping (CIM). CIM detected more than 5 additive QTL per trait explaining 7.1–24.7% of the phenotypic variation. Abundant co-localization of these QTL was observed across all chromosomes, and the highest cluster was identified on chromosome 6. Searching for candidate genes using the confidence interval of our QTL clusters reveals that these clusters might comprise a set of genes that are tightly linked. Some QTL showed multiple effects; however, the allele for each trait was favouring the parent with the increasing effect. QE interactions were observed for QTL showing multiple effects. Additive × additive interaction was observed for 7 out of 10 traits, indicating the importance of epistatic analysis. However, the phenotypic variation explained by digenic interactions was lower compared to the individual QTL. Our results indicate that various genetic components contribute to fibre-related traits and should be considered during the enhancement of sorghum for lignocellulosic biomass.     

Morphological traits defining species differences in wild relatives of maize are controlled by multiple quantitative trait loci

We analyzed the genetic basis of morphological differences between two wild species of teosinte (Zea diploperennis and Z. mays ssp. parviglumis), which are relatives of maize. These two species differ in a number of taxonomically important traits including the structure of the tassel (male inflorescence), which is the focus of this report. To investigate the genetic inheritance of six tassel traits, quantitative trait locus (QTL) mapping with 95 RFLP markers was employed on a population of 425 F2 plants. Each trait was analyzed by interval mapping (IM) and composite interval mapping (CIM) to identify and characterize the QTL controlling the differences in tassel morphology. We detected two to eight QTL for each trait. In total, 30 QTL with IM and 33 QTL with CIM were found for tassel morphology. QTL for several of the traits mapped near each other, suggesting pleiotropy and/or linkage of QTL. The QTL showed small to moderate magnitudes of effect. No QTL of exceptionally large effect were found as seen under domestication and in the case of some other natural species. Thus, the model involving major QTL of large effect seems not to apply to the traits and species analyzed. A mixture of QTL with positive and negative allelic effects was found for most tassel traits and may suggest a history of periodic changes in the direction of selection during the divergence of Z. diploperennis and Z. mays ssp. parviglumis or fixation of QTL alleles by random genetic drift rather than selection.     

Multiple-line cross quantitative trait locus mapping in sugar beet (Beta vulgaris L.)

Linkage mapping based on multiple-line crosses is a promising strategy for mapping quantitative trait loci (QTL) underlying important agronomic traits. The main goal of this survey was to study the advantages of QTL mapping across versus within biparental populations using experimental data from three connected sugar beet (Beta vulgaris L.) populations evaluated for beet yield and potassium and sodium content. For the combined analysis across populations, we used two approaches for cofactor selection. In Model A, we assumed identical cofactors for every segregating population. In contrast, in Model B we selected cofactors specific for every segregating population. Model A performed better than Model B with respect to the number of QTL detected and the total proportion of phenotypic variance explained. The QTL analyses across populations revealed a substantially higher number of QTL compared to the analyses of single biparental populations. This clearly emphasizes the potential to increase QTL detection power with a joint analysis across biparental populations.