Microplate-based filter paper assay to measure total cellulase activity

The standard filter paper assay (FPA) published by the International Union of Pure and Applied Chemistry (IUPAC) is widely used to determine total cellulase activity. However, the IUPAC method is not suitable for the parallel analyses of large sample numbers. We describe here a microplate-based method for assaying large sample numbers. To achieve this, we reduced the enzymatic reaction volume to 60 microl from the 1.5 ml used in the IUPAC method. The modified 60-microl format FPA can be carried out in 96-well assay plates. Statistical analyses showed that the cellulase activities of commercial cellulases from Trichoderma reesei and Aspergillus species determined with our 60-microl format FPA were not significantly different from the activities measured with the standard FPA. Our results also indicate that the 60-microl format FPA is quantitative and highly reproducible. Moreover, the addition of excess beta-glucosidase increased the sensitivity of the assay by up to 60%.     

Standardization of the filter paper activity assay for solid substrate fermentation

The conditions of the filter paper activity (FPA) assay were standardized for solid substrate fermentation (SSF). The FPA is a relative measure of the overall cellulose hydrolysing capacity of microbial cellulase preparations, thus reliable and comparable data may be obtained only under standardized conditions. The standardization developed for submerged fermentation (SF) cannot be translated directly to SSF. In SSF, the FPA is strongly dependent on the extraction volume and on the dilution of the enzyme in the assay. The optimal extraction volume was substrate dependent in SSF of corn fiber, spent brewing grains and wheat straw for cellulase production by Trichoderma reesei Rut C30. Other cellulolytic enzyme assays (endoglucanase, beta-glucosidase and xylanase) were much less sensitive to the extraction volume.     

秸秆纤维素分解菌的酶活力测定

目的:测定秸秆纤维素分解菌的酶活力。方法:从土壤中分离出具有分解纤维素能力的菌株,采用刚果红染色法进行粗选,得到7株透明圈较大的菌株。将这7株菌株液体发酵培养6d,再分别用滤纸分解度观察、羧甲基纤维素酶活法(CMC)、滤纸酶活法(FPA)和天然纤维素酶活法测定其酶活力。结果:在7株菌株中,F-1、F-2、F-3、F-5的酶活力测定结果与其溶解圈的测定结果、滤纸分解结果基本相同。且天然纤维素酶活力高的菌株,其CMC酶活、FPA酶活也高,滤纸分解效果也比较明显。结论:CMC法、FPA法和天然纤维素酶活法适于测定秸秆纤维素分解菌的酶活力。     

A simple and fast method for the determination of endo- and exo-cellulase activity in cellulase preparations using filter paper

This study describes a procedure for the selective determination of endo- (EG) and exo- (ExG) cellulase activities using filter paper as the sole substrate. The procedure is based on the enzymes mode of action whereby EG activity predominantly forms insoluble reducing sugars and ExG activity soluble reducing sugars. The procedure was developed using filter paper as substrate for hydrolysis with three cellulase preparations of Hypocrea jecorina containing either endoglucanase (EG), predominantly exoglucanase (ExG) or both endo- and exoglucanase activities. Hydrolysis experiments, which were followed assessing the formation of total, soluble and insoluble reducing sugars (RS), showed that up to 30min of hydrolysis predominantly insoluble reducing sugars were formed, while after this initial hydrolysis stage soluble reducing sugar formation increased significantly, making it thus possible to measure separately EG and ExG activity. FPA activities obtained from the reaction products at different reaction times suggest that EG-activity (FPA(insol)) should be measured between 10 and 20min of hydrolysis. The proposed procedure allows to evaluate the EG and ExG activity contribution to total cellulase activity and to calculate the endo/exo activity ratio of any cellulase preparation.     

Cellulase production by Penicillium echinulatum on lactose

The inducer effect of lactose on cellulase activity in Penicillium echinulatum 9A02S1 was studied. Submerged cultivation was performed using different concentrations of lactose and cellulose, in which the pH, mycelial mass, soluble proteins, filter paper activity (FPA), and activity of β-glucosidases were measured. The cultures containing lactose only presented low FPAs (0.1 FPU/ml). The cultures with associated cellulose and lactose and those containing cellulose only presented similar enzymatic activities (1.5 FPU/ml), suggesting the possibility of up to 75% reduction in the cellulose concentration. In relation to the β-glucosidases, increasing the lactose/cellulose ratio results in a proportional increase of enzymatic activity. In the cultures using both inducers, there is a longer duration of the acid phase in relation to treatments using only cellulose or lactose, indicating diauxia and catabolic repression.     

Accessory enzymes influence cellulase hydrolysis of the model substrate and the realistic lignocellulosic biomass

The potential of cellulase enzymes in the developing and ongoing “biorefinery” industry has provided a great motivation to develop an efficient cellulase mixture. Recent work has shown how important the role that the so-called accessory enzymes can play in an effective enzymatic hydrolysis. In this study, three newest Novozymes Cellic CTec cellulase preparations (CTec 1/2/3) were compared to hydrolyze steam pretreated lignocellulosic substrates and model substances at an identical FPA loading. These cellulase preparations were found to display significantly different hydrolytic performances irrelevant with the FPA. And this difference was even observed on the filter paper itself when the FPA based assay was revisited. The analysis of specific enzyme activity in cellulase preparations demonstrated that different accessory enzymes were mainly responsible for the discrepancy of enzymatic hydrolysis between diversified substrates and various cellulases. Such the active role of accessory enzymes present in cellulase preparations was finally verified by supplementation with β-glucosidase, xylanase and lytic polysaccharide monooxygenases AA9. This paper provides new insights into the role of accessory enzymes, which can further provide a useful reference for the rational customization of cellulase cocktails in order to realize an efficient conversion of natural lignocellulosic substrates.     

Cellulase production in a new mutant strain of Penicillium decumbens ML-017 by solid state fermentation with rice bran

To produce cellulolytic enzyme efficiently, Penicillium decumbens strain L-06 was used to prepare mutants with ethyl methane sulfonate (EMS) and UV-irradiation. A mutant strain ML-017 is shown to have a higher cellulase activity than others. Box-Behnken's design (BBD) and response surface methodology (RSM) were adopted to optimize the conditions of cellulase (filter paper activity, FPA) production in strain ML-017 by solid-state fermentation (SSF) with rice bran as the substrate. And the result shows that the initial pH, moisture content and culture temperature all have significant effect on the production of cellulase. The optimized condition shall be initial pH 5.7, moisture content 72% and culture temperature 30°C. The maximum cellulase (FPA) production was obtained under the optimized condition, which is 5.76 IU g(-1), increased by 44.12% to its original strain. It corresponded well with the calculated results (5.15 IU g(-1)) by model prediction. The result shows that both BBD and RSM are the cellulase optimization methods with good prospects.     

Characterizing the Mechanical Variations of Human Femoropopliteal Artery During Aging Process

Vascular diseases during aging process are closely correlated to the age-related changes of mechanical stimuli for resident cells. Characterizing the variations of mechanical environments in vessel walls with advancing age is crucial for a better understanding of vascular remodeling and pathological changes. In this study, the mechanical stress, strain, and wall stiffness of the femoropopliteal arteries (FPAs) were compared among four different age groups from adolescent to young, middle-aged, and aged subjects. The material parameters and geometries adopted in the FPA models were obtained from published experimental results. It is found that high mechanical stress appears at different layers in young and old FPA walls respectively. The characteristics of the middle-aged FPA wall suggests that it is the most capable of resisting high blood pressures and maintaining a mechanical homeostasis during the entire life span. It is demonstrated that the variations of stress and strain rather than that of wall stiffness can be used as an indicator to illustrate the profile of FPA aging. Our results could serve as an age-specific mechanical reference for vascular mechanobiological studies, and allow further exploration of cellular dysfunctions in vessel walls during aging process.     

Cellulase production on glucose-based media by the UV-irradiated mutants of Trichoderma reesei

From 22,791 mutants of a cellulase hyper-producing strain of Trichoderma reesei (Hypocrea jecorina), ATCC66589, as the parent, we selected two mutants, M2-1 and M3-1, that produce cellulases in media containing both cellulose and glucose. The mutation enabled the mutants to produce cellulases, which were measured as p-nitrophenyl β-d-lactopyranoside-hydrolyzing activities, in media with glucose as a sole carbon source, although M2-1 exhibited different sensitivities to glucose from M3-1. When the mutants were grown for 8 days on a medium with cellulose as a sole carbon source, the filter-paper-degrading activities (FPAs) per gram of cellulose were 257 and 281 U for M2-1 and M3-1, respectively, values that were 1.1–1.2 times higher than that of the parental strain. Cellulase production by M2-1 and M3-1 on a medium with a continuously fed mixture of glucose and cellobiose resulted in 214 and 210 U of FPA/gram carbon sources, respectively, whereas less efficient production (140 U of FPA/gram carbon source) was achieved by the parental strain. The improved cellulase productivity of the mutants allows us to use glucose as a carbon source for efficient on-site production of cellulases with quality/quantity-controlled feeding of soluble carbon sources and inducers.     

Microplate-based assays for the evaluation of antibacterial effects of photocatalytic coatings

Three microplate-based viability assays for assessing the antibacterial effects of photocatalytic coatings were compared to the conventional colony count method. In the experimental design, cultured Escherichia coli were exposed to photocatalysis on various TiO₂ films in the presence of either UVA or visible light. The photocatalytic effects on the bacterial physiology were determined by real-time measurements of metabolic activity (XTT assay), biomass formation in the liquid medium (growth assay), and by assessing membrane integrity (with propidium iodide and SYTO 9 fluorescent nucleic acid binding dyes—BacLight assay). All three methods proved to be more sensitive and reproducible than colony count for the evaluation of the bactericidal effect of photocatalysis, XTT, and growth assay succeeded in detecting differences in both UVA and visible light-activated photocatalytic coatings. BacLight could efficiently detect the visible light-dependent photocatalytic effect on bacteria and identify membrane damage, but resulted inadequate for evaluating the UVA-dependent antibacterial effects. The described microplate-based evaluation methods proved being more effective and rapid than the colony count assay for assessing the antibacterial effect of various photocatalytic coatings.     

Effect of methylxanthines on production of cellulases by Penicillium echinulatum

AIM: In this work, the effect of supplementing liquid cellulase production media (CPM) with methylxanthines (aminophylline, caffeine and theophylline), with and without the addition of glucose, on the secretion of cellulases by Penicillium echinulatum strain 2HH (wild-type) and the derived mutant strain 9A02S1 was studied. METHODS AND RESULTS: When compared with unsupplemented CPM, both strains produced higher beta-glucosidase and filter paper activities (FPAs) in CPM supplemented with 1 micromol l(-1) of caffeine but lower activities with 5 micromol l(-1) of caffeine. With theophylline only, strain 9A02S1 produced higher beta-glucosidase and FPAs, while aminophylline produced no effect on the cellulase activity of either strain. Supplementation of CPM with 0.5% (w/v) of glucose plus caffeine resulted in higher beta-glucosidase and FPAs being produced by strain 2HH, but not strain 9A02S1, than in CPM supplemented with 0.5% (w/v) of glucose only. CONCLUSIONS: These results indicate that different concentrations of caffeine and theophylline can increase the beta-glucosidase and FPAs produced by P. echinulatum strains 2HH and 9A02S1. SIGNIFICANCE AND IMPACT OF THE STUDY: The results suggest that some methylxanthines, in adequate concentration, can be used as media components to increase cellulase production.     

The activity of postural asymmetry factors in symmetrical sections of the rat spinal cord

The distribution of the low-molecular weight and high-molecular weight postural asymmetry factors (FPA) activity in the left and right parts of the lumbal region of the rat spinal cord was studied. Low-molecular weight FPA induces flexion of the hind limb ipsilateral to the half of the spinal cord from which FPA was isolated, while high-molecular weight FPA induces contralateral flexion. The activities of the low- and high-molecular weight FPAs in each half of the spinal cord are comparable in normal rat. After the suction lesion of the motor areas in the left hemisphere the increase of the low-molecular weight FPA activity in the right half of the lumbal region of the spinal cord was observed.     

Response surface optimization of cellulase production from Aneurinibacillus aneurinilyticus BKT-9: An isolate of urban Himalayan freshwater

Due to their vast industrial potential, cellulases have been regarded as the potential biocatalysts by both the academicians and the industrial research groups. In the present study, culturable bacterial strains of Himalayan Urban freshwater lake were investigated for cellulose degrading activities. Initially, a total of 140 bacterial strains were isolated and only 45 isolates were found to possess cellulose degrading property. On the basis of preliminary screening involving cellulase activity assay on CMC agar (with clear zone of hydrolysis) and biosafety assessment testing, only single isolate named as BKT-9 was selected for the cellulase production studies. Strain BKT-9 was characterized at the molecular level using rRNA gene sequencing and its sequence homology analysis revealed its identity as Aneurinibacillus aneurinilyticus. Further, various physico-chemical parameters and culture conditions were optimized using one factor approach to enhance cellulase production levels in the strain BKT-9. Subsequently, RSM based statistical optimization led to formulation of cellulase production medium, wherein the bacterial strain exhibited ~60 folds increase in enzyme activity as compared to un-optimized culture medium. Further studies are being suggested to scale up cellulase production in A. aneurinilyticus strain BKT-9 so that it can be utilized for biomass saccharification at an industrial level.     

A Shortcut to the Optimization of Cellulase Production Using the Mutant Trichoderma reesei YC-108

Trichoderma reesei YC-108, a strain isolated by a kind of newly invented plate was found to over produce cellulase and it was then used as a cellulase producer. To get the maximum amount of cellulase, the combination of the medium ingredients, which has a profound influence on metabolic pathway was optimized using response surface methodology. The optimum composition was found to be 24.63 g/L wheat bran, 30.78 g/L avicel, and 19.16 g/L soya-bean cake powder. By using the optimized medium, the filter paper activity (FPA) increased nearly five times to 15.82 IU/mL in a 30 L stirred fermenter, carboxymethyl cellulase activity (CMCase) was increased from 83.02 to 628.05 IU/mL and the CMCase/FPA ratio was nearly doubled compared with the parent strain at initial medium.     

A continuous spectrophotometric assay for the determination of cellulase solubilizing activity

A cellulase assay was developed for the continuous measurement of colored cellulose oligosaccharides (total carbohydrates) released during enzymatic hydrolysis of dyed crystal-line cellulose. Several cellulosic substrates were uniformly dyed by Remalzol brilliant blue R salt without altering their physical properties. Dyed Avicel (6.5%, w/w) was selected as the most representative substrate for the assay procedure. The assay was performed continuously in a simple, thermally controlled apparatus designed for filtration of the reaction mixture via a 5-μm-pore-size nylon filter to retain the crystalline dyed cellulose while spectrophotometrically monitoring the absorbance at 595 nm of the reaction filtrate. Crude supernatant cellulase of Trichoderma viride QM9414 was used to test the assay procedure. The activity of cellulase on dyed Avicel as measured by ΔA_595nm correlated directly with the total carbohydrates formed. The initial reaction rate of cellulase solubilizing activity was readily determined with high sensitivity. The continuous assay has utility for the study of cellulase kinetics and for the comparison of activities from different microorganisms.     

Expression of a bifunctional cellulase with exoglucanase and endoglucanase activities to enhance the hydrolysis ability of cellulase from a marine Aspergillus niger

Low exoglucanase and endoglucanase activities of marine Aspergillus niger cellulase decreased the hydrolyzing ability of cellulase. To increase the activity of halostable cellulase obtained from a marine A. niger, a cellulase with endoglucanase and exoglucanase activity was efficiently expressed by constructing a vector with promoter glaA. Exoglucanase and endoglucanase activities increased from 0.21 and 4.51 U/ml of the original strain to 0.89 U/ml and 15.12 U/ml of the transformant, respectively. Filter paper activity (FPA) increased by 7.1 folds from 0.63 to 4.47 U/ml. The release of glucose by hydrolysis of wheat straw with cellulase from the transformant was 1.37 folds higher than that with cellulase from the original strain under high salinity condition. Cellulase with endoglucanase and exoglucanase activities could be well expressed in marine A. niger. The cellulase from the transformant not only showed higher activity, but also retained halostability. An appreciate proportion of β-glucosidase, exoglucanase, endgolucanasein cellulase was important for hydrolyzing cellulose.     

Evaluation of culture conditions for cellulase production by two Trichoderma reesei mutants under solid-state fermentation conditions

Response surface methodology (RSM) was used to evaluate the effects of fermentation parameters for cellulase production by Trichoderma reesei QM9414 and T. reesei MCG77 in solid-state fermentation using rice bran as substrate. Initial pH, moisture content and temperature were optimized using filter paper activity (FPA) as response. Statistical analysis of the results for T. reesei QM9414 showed that only moisture content had significant effect on cellulase activity and had a linear effect on enzyme activity (maximum enzyme activities were obtained at 70% moisture content). The results for T. reesei MCG77 showed that temperature and moisture content were the most significant parameters for cellulase activity. The optimum cellulase production was in the temperature range of 25-30 degrees C and moisture content between 55% and 70%. After the optimization, the FPA in T. reesei MCG77 was increased by 2.5 folds compared to that of T. reesei QM9414.     

三株丝状真菌分解樟子松凋落物酶活性

该研究以在樟子松凋落物层中高频出现的3株丝状真菌Alternaria sp.、Penicillium sp.和Pestalotiopsis sp.为供试菌株, 以樟子松新鲜落叶为作用底物, 通过发酵纯培养的方法, 测定了底物有机物质质量损失及发酵过程中产生的漆酶(Laccase)、锰过氧化物酶(MnP)、羧甲基纤维素酶(CMCase)和滤纸酶(FPA)酶活性变化, 并验证了酶活性与底物降解的关系。结果表明, Alternaria sp. 引起底物总有机物质质量损失最大, 且产生的漆酶、羧甲基纤维素酶和滤纸酶活性都较高; Penicillium sp. 产生的锰过氧化物酶活性最高。3株丝状真菌同属于真菌功能群中的木质纤维素分解者。     

腺苷三磷酸和环腺苷单磷酸对丝状真菌纤维素酶合成的调节

以虫荧光素酶法检验了四株丝状真菌在葡萄糖—无机盐液体培养过程中的胞内ATP含量。结果表明,只有当胞内ATP浓度低于10~(-S)mg/ml时,真菌才开始合成胞外纤维素酶(FPA)。以不同浓度的各种碳源培养时,菌体胞内ATP含量只要超过10~(-1)mg/ml,FPA的合成即发生阻遏。菌体胞内ATP含量与FPA合成呈显著负相关。以高效液相色谱(HPLC)法检测了菌体培养液中的cAMP含量。在非阻遏条件下,外源cAMP可以提高FPA的合成水平。但外源cAMP不能解除已经发生的酶合成阻遏。菌体ATP和cAMP水平是调节真菌纤维素酶合成的重要因子。