Engineered riboswitches: Expanding researchers' toolbox with synthetic RNA regulators

Riboswitches are natural RNA-based genetic switches that sense small-molecule metabolites and regulate in response the expression of the corresponding metabolic genes. Within the last years, several engineered riboswitches have been developed that act on various stages of gene expression. These switches can be engineered to respond to any ligand of choice and are therefore of great interest for synthetic biology. In this review, we present an overview of engineered riboswitches and discuss their application in conditional gene expression systems. We will provide structural and mechanistic insights and point out problems and recent trends in the development of engineered riboswitches.     

Direct selection of RNA beacon aptamers

A method for the direct selection of RNA molecules that can be easily converted into beacon aptamers is presented. Beacon aptamers are fluorescently labeled nucleic acids that signal the presence of a specific ligand through changes in fluorescence intensity. Typically, ligand binding causes an increase in fluorescence intensity by inducing a conformational change that separates a fluorophore/quencher pair. The method presented here simultaneously selects for ligand binding and induction of an appropriate conformational change. The method was tested by selecting RNA molecules that can detect the aminoglycoside antibiotic tobramycin. After 14 rounds of selection, two sequence families emerged. Upon conversion into beacon aptamers, representatives of the two selected sequence families specifically detected tobramycin, while a negative control RNA that did not survive the selection protocol did not function as a tobramycin beacon aptamer.     

RNA aptamers directed against release factor 1 from Thermus thermophilus

An in vitro selection/amplification (SELEX) was used to generate RNA aptamers that specifically bind Thermus thermophilus release factor 1 (RF1). From 31 isolated clones, two groups of aptamers with invariable sequences 5'-ACCU-3' and 5'-GAAAGC-3' were isolated. Chemical and enzymatic probing of the structure indicate that in both groups the invariable sequences are located in single-stranded regions of hairpin structures. Complex formations between RF1 and aptamers of both groups were identified by electrophoretic shift assay and chemical footprinting. Deletion of the invariable sequences did not effect the secondary structure of the aptamers but abolished their binding to RF1. RNA motifs matching the invariable sequences of the aptamers are present as consensus sequences in the peptidyl transferase center of 23S rRNAs. T. thermophilus RF1 recognizes UAG stop codons in an Escherichia coli in vitro translation system. Aptamers from both groups inhibited this RF1 activity.     

In silico selection of RNA aptamers

In vitro selection of RNA aptamers that bind to a specific ligand usually begins with a random pool of RNA sequences. We propose a computational approach for designing a starting pool of RNA sequences for the selection of RNA aptamers for specific analyte binding. Our approach consists of three steps: (i) selection of RNA sequences based on their secondary structure, (ii) generating a library of three-dimensional (3D) structures of RNA molecules and (iii) high-throughput virtual screening of this library to select aptamers with binding affinity to a desired small molecule. We developed a set of criteria that allows one to select a sequence with potential binding affinity from a pool of random sequences and developed a protocol for RNA 3D structure prediction. As verification, we tested the performance of in silico selection on a set of six known aptamer–ligand complexes. The structures of the native sequences for the ligands in the testing set were among the top 5% of the selected structures. The proposed approach reduces the RNA sequences search space by four to five orders of magnitude—significantly accelerating the experimental screening and selection of high-affinity aptamers.     

Selection and characterization of RNA aptamers to the RNA-dependent RNA polymerase from foot-and-mouth disease virus

Foot-and-mouth disease virus causes a highly contagious disease of agricultural livestock and is of enormous economic importance. Replication of the RNA genome of the virus, via negative strand intermediates, involves an RNA-dependent RNA polymerase (3Dpol). RNA aptamers specific to this enzyme have been selected and characterized. Some of these molecules inhibit enzymatic activity in vitro, with IC50 values of <20 nM and Ki values of 18-75 nM. Two of these show similarity, both with each other and with regions of the viral genome. Furthermore, truncated versions of one of the aptamers have been used to define the parts of the molecule responsible for its inhibitory activity.     

Construction of intragenic synthetic riboswitches for detection of a small molecule

Bacterial sensors, based on ligand-mediated genetic control systems, are promising for on-site chemical detection because sensing targets and generating signals do not require costly instrumentation. Here, we have constructed intragenic synthetic riboswitches without relying on high-throughput screening and demonstrated that the riboswitches can be harnessed to develop bacterial sensors displaying readily visible reporter signals in response to theophylline. In vivo imaging using the riboswitch showed target-specific changes in the expression of a green fluorescence protein reporter, which was visible even to the naked eye.     

Automated purification of synthetic oligonucleotides

We have automated the trityl-on purification of oligonucleotides by use of an XYZ axis robotic solid-phase extraction system. This greatly decreased the preparation time required for oligonucleotide purification. After about 15 min for set up of the samples and instrument, the oligonucleotides are automatically purified with a 15-min run time per sample. Thus, for example, the purification of 15 oligonucleotides requires only about 15 min of preparation time and 4 h of machine time. Yields and purity are equivalent to manual methods.     

Composite RNA aptamers as functional mimics of proteins

Individual RNA aptamers are often used to modulate the function of their target proteins, and multi-valent aptamers have been constructed to enhance their activity. To expand the utility of aptamers in manipulating and controlling biological processes, here we advance a general method for the design and construction of composite aptamers. The resulting molecular constructs resemble proteins in that they can form specific interactions with three or more different partners and be readily integrated into existing protein regulatory networks. As the first embodiment of this method, we created a tetra-valent aptamer that simultaneously binds to two molecules of the Drosophila protein B52 and two copies of streptavidin, thus mimicking the function of an antibody in immunochemical assays. We demonstrated that the performance of this ‘aptabody’ rivals that of a monoclonal antibody against B52 in these assays. While this study was performed in vitro and the composite aptamer we made was intended to mimic an existing protein, the same method can be used to accommodate arbitrary combinations of individual aptamers in composite molecular contexts, and these constructs can be delivered into living cells, where they are able to utilize existing cellular infrastructure for their production and processing.     

Development of RNA aptamers for detection of Salmonella Enteritidis

We developed and evaluated RNA aptamers to analyze their potential for use in detecting Salmonella Enteritidis. The selected aptamer was observed to specifically bind to Salmonella Enteritidis without any cross-reactivity to other Salmonella serovars. Thus, this study suggests that aptamers specific to Salmonella Enteritidis have a high potential for use in presumptive presumptive screening methods or alternative serotyping methods.     

Functional RNA microarrays for high-throughput screening of antiprotein aptamers

High-throughput methods for generating aptamer microarrays are described. As a proof-of-principle, the microarrays were used to screen the affinity and specificity of a pool of robotically selected antilysozyme RNA aptamers. Aptamers were transcribed in vitro in reactions supplemented with biotinyl-guanosine 5'-monophosphate, which led to the specific addition of a 5' biotin moiety, and then spotted on streptavidin-coated microarray slides. The aptamers captured target protein in a dose-dependent manner, with linear signal response ranges that covered seven orders of magnitude and a lower limit of detection of 1 pg/mL (70 fM). Aptamers on the microarray retained their specificity for target protein in the presence of a 10,000-fold (w/w) excess of T-4 cell lysate protein. The RNA aptamer microarrays performed comparably to current antibody microarrays and within the clinically relevant ranges of many disease biomarkers. These methods should also prove useful for generating other functional RNA microarrays, including arrays for genomic noncoding RNAs that bind proteins. Integrating RNA aptamer microarray production with the maturing technology for automated in vitro selection of antiprotein aptamers should result in the high-throughput production of proteome chips.     

Altering molecular recognition of RNA aptamers by allosteric selection

In a continuing effort to explore structural and functional dynamics in RNA catalysis, we have created a series of allosteric hammerhead ribozymes that are activated by theophylline. Representative ribozymes exhibit greater than 3000-fold activation upon effector-binding and cleave with maximum rate constants that are equivalent to the unmodified hammerhead ribozyme. In addition, we have evolved a variant allosteric ribozyme that exhibits an effector specificity change from theophylline to 3-methylxanthine. Molecular discrimination between the two effectors appears to be mediated by subtle conformational differences that originate from displacement of the phosphodiester backbone near the effector binding pocket. These findings reveal the importance of abstruse aspects of molecular recognition by nucleic acids that are likely to be unapproachable by current methods of rational design.     

High-performance liquid chromatography purification of chemically modified RNA aptamers

2′-Fluoro modified RNAs are useful as potential therapeutics and as special substrates for studying RNA function. 2′-Fluoro modified RNAs generally need to be purified after they are prepared either enzymatically or by solid-phase synthesis. Here we introduce a protocol by which 2′-fluoro modified RNAs with 57 and 58 nucleotides can be resolved and purified using ion-pair, reverse-phase high-performance liquid chromatography (HPLC). Because the size of our RNA samples is in the range of many known RNA aptamers of therapeutic values, our protocol should be generally useful.     

Selection of RNA aptamers specific to active prostate-specific antigen

A counter-SELEX procedure with recombinant purified active prostate specific antigen (PSA) was used to identify specific RNA aptamers against the active PSA. We developed two different kinds of counter-SELEX methods; one includes pre-clearance step with inactive proPSA protein, and the other with tagged GST protein. After 9 iterative selection cycles, several identical RNA aptamers can be identified from both counter-SELEX methods. Real-time PCR analysis and gel retardation experiment showed that the aptamers have a specific binding activity against the active PSA, but not for GST or proPSA. These aptamers could be of potential use as specific diagnostic, imaging and/or therapeutic agents against prostate cancer.     

Selection of RNA aptamers against mouse embryonic stem cells

Embryonic stem cells (ESCs) are capable of unlimited self-renewal and differentiation into multiple cell types. Recent large-scale analyses have identified various cell surface molecules on ESCs. Some of them are considered to be beneficial markers for characterization of cellular phenotypes and/or play an essential role for regulating the differentiation state. Thus, it is desired to efficiently produce affinity reagents specific to these molecules. In this study, to develop such reagents for mouse ESCs (mESCs), we selected RNA aptamers against intact, live mESCs using several selection strategies. The initial selection provided us with several anti-mESC aptamers of distinct sequences, which unexpectedly react with the same molecule on mESCs. Then, to isolate aptamers against different surface markers on mESCs, one of the selected aptamers was used as a competitor in the subsequent selections. In addition, one of the selections further employed negative selection against differentiated mouse cells. Consequently, we successfully isolated three classes of anti-mESC aptamers that do not compete with one another. The isolated aptamers were shown to distinguish mESCs from differentiated mouse cell lines and trace the differentiation process of mESCs. These aptamers could prove useful for developing molecular probes and manipulation tools for mESCs.