Amphiphilic triblock copolymers with PEGylated hydrocarbon structures as environmentally friendly marine antifouling and fouling-release coatings

The ideal marine antifouling (AF)/fouling-release (FR) coating should be non-toxic, while effectively either resisting the attachment of marine organisms (AF) or significantly reducing their strength of attachment (FR). Many recent studies have shown that amphiphilic polymeric materials provide a promising solution to producing such coatings due to their surface dual functionality. In this work, poly(ethylene glycol) (PEG) of different molecular weights (M_w?=?350, 550) was coupled to a saturated difunctional alkyl alcohol to generate amphiphilic surfactants (PEG-hydrocarbon-OH). The resulting macromolecules were then used as side chains to covalently modify a pre-synthesized PS₈?_K-b-P(E/B)₂₅?_K-b-PI₁₀?_K (SEBI or K3) triblock copolymer, and the final polymers were applied to glass substrata through an established multilayer surface coating technique to prepare fouling resistant coatings. The coated surfaces were characterized with AFM, XPS and NEXAFS, and evaluated in laboratory assays with two important fouling algae, Ulva linza (a green macroalga) and Navicula incerta, a biofilm-forming diatom. The results suggest that these polymer-coated surfaces undergo surface reconstruction upon changing the contact medium (polymer/air vs polymer/water), due to the preferential interfacial aggregation of the PEG segment on the surface in water. The amphiphilic polymer-coated surfaces showed promising results as both AF and FR coatings. The sample with longer PEG chain lengths (M_w?=?550?g?mol^?1) exhibited excellent properties against both algae, highlighting the importance of the chemical structures on ultimate biological performance. Besides reporting synthesis and characterization of this new type of amphiphilic surface material, this work also provides insight into the nature of PEG/hydrocarbon amphiphilic coatings, and this understanding may help in the design of future generations of fluorine-free, environmentally friendly AF/FR polymeric coatings.     

Comparison of laboratory and field testing performance evaluations of siloxane-polyurethane fouling-release marine coatings

A series of eight novel siloxane-polyurethane fouling-release (FR) coatings were assessed for their FR performance in both the laboratory and in the field. Laboratory analysis included adhesion assessments of bacteria, microalgae, macroalgal spores, adult barnacles and pseudobarnacles using high-throughput screening techniques, while field evaluations were conducted in accordance with standardized testing methods at three different ocean testing sites over the course of six-months exposure. The data collected were subjected to statistical analysis in order to identify potential correlations. In general, there was good agreement between the laboratory screening assays and the field assessments, with both regimes clearly distinguishing the siloxane-polyurethane compositions comprising monofunctional poly(dimethyl siloxane) (PDMS) (m-PDMS) as possessing superior, broad-spectrum FR properties compared to those prepared with difunctional PDMS (d-PDMS). Of the seven laboratory screening techniques, the Cellulophaga lytica biofilm retraction and reattached barnacle (Amphibalanus amphitrite) adhesion assays were shown to be the most predictive of broad-spectrum field performance.     

Poly(dimethyl siloxane) (PDMS) network blends of amphiphilic acrylic copolymers with poly(ethylene glycol)-fluoroalkyl side chains for fouling-release coatings. II. Laboratory assays and field immersion trials

Amphiphilic copolymers containing different amounts of poly(ethylene glycol)-fluoroalkyl acrylate and polysiloxane methacrylate units were blended with a poly(dimethyl siloxane) (PDMS) matrix in different proportions to investigate the effect of both copolymer composition and loading on the biological performance of the coatings. Laboratory bioassays revealed optimal compositions for the release of sporelings of Ulva linza, and the settlement of cypris larvae of Balanus amphitrite. The best-performing coatings were subjected to field immersion tests. Experimental coatings containing copolymer showed significantly reduced levels of hard fouling compared to the control coatings (PDMS without copolymer), their performance being equivalent to a coating based on Intersleek 700?. XPS analysis showed that only small amounts of fluorine at the coating surface were sufficient for good antifouling/fouling-release properties. AFM analyses of coatings under immersion showed that the presence of a regular surface structure with nanosized domains correlated with biological performance.     

Bioassays and field immersion tests: a comparison of the antifouling activity of copper-free poly(methacrylic)-based coatings containing tertiary amines and ammonium salt groups

This paper focuses on the activity spectrum of three dimethylalkyl tertiary amines as potential active molecules and the corresponding ammonium salt-based antifouling (AF) paints. Bioassays (using marine bacteria, microalgae and barnacles) and field tests were combined to assess the AF activity of coatings. Bioassay results demonstrated that the ammonium salt-based paints did not inhibit the growth of microorganisms (except the dimethyldodecylammonium-based coatings) and that the tertiary amines were potent towards bacteria, diatoms, and barnacle larvae at non-toxic concentrations (therapeutic ratio, LC₅₀/EC₅₀, < 1). The results from field tests indicated that the ammonium salt-based coatings inhibited the settlement of macrofouling and the dimethylhexadecylammonium-based coatings provided protection against slime in comparison with PVC blank panels. Thus, results from laboratory assays did not fully concur with the AF activity of the paints in the field trial.     

Amphiphilic block copolymer/poly(dimethylsiloxane) (PDMS) blends and nanocomposites for improved fouling-release

Amphiphilic diblock copolymers, Sz6 and Sz12, consisting of a poly(dimethylsiloxane) block (average degree of polymerisation = 132) and a PEGylated-fluoroalkyl modified polystyrene block (Sz, average degree of polymerisation = 6, 12) were prepared by atom transfer radical polymerization (ATRP). Coatings were obtained from blends of either block copolymer (1–10 wt%) with a poly(dimethylsiloxane) (PDMS) matrix. The coating surface presented a simultaneous hydrophobic and lipophobic character, owing to the strong surface segregation of the lowest surface energy fluoroalkyl chains of the block copolymer. Surface chemical composition and wettability of the films were affected by exposure to water. Block copolymer Sz6 was also blended with PDMS and a 0.1 wt% amount of multiwall carbon nanotubes (CNT). The excellent fouling-release (FR) properties of these new coatings against the macroalga Ulva linza essentially resulted from the inclusion of the amphiphilic block copolymer, while the addition of CNT did not appear to improve the FR properties.     

Poly(dimethyl siloxane) (PDMS) network blends of amphiphilic acrylic copolymers with poly(ethylene glycol)-fluoroalkyl side chains for fouling-release coatings. II. Laboratory assays and field immersion trials

Amphiphilic copolymers containing different amounts of poly(ethylene glycol)-fluoroalkyl acrylate and polysiloxane methacrylate units were blended with a poly(dimethyl siloxane) (PDMS) matrix in different proportions to investigate the effect of both copolymer composition and loading on the biological performance of the coatings. Laboratory bioassays revealed optimal compositions for the release of sporelings of Ulva linza, and the settlement of cypris larvae of Balanus amphitrite. The best-performing coatings were subjected to field immersion tests. Experimental coatings containing copolymer showed significantly reduced levels of hard fouling compared to the control coatings (PDMS without copolymer), their performance being equivalent to a coating based on Intersleek 700?. XPS analysis showed that only small amounts of fluorine at the coating surface were sufficient for good antifouling/fouling-release properties. AFM analyses of coatings under immersion showed that the presence of a regular surface structure with nanosized domains correlated with biological performance.     

A comparison of the antifouling performance of air plasma spray (APS) ceramic and high velocity oxygen fuel (HVOF) coatings for use in marine hydraulic applications

Maritime hydraulic components are often exposed to harsh environmental conditions which can lead to accelerated deterioration, reduced function, equipment failure and costly repair. Two leading causes of maritime hydraulic failure are biofouling accumulation and corrosion. This study examined the antifouling performance of three candidate replacement high velocity oxygen fuel (HVOF) coatings relative to the performance of the current baseline air plasma spray (APS) ceramic coating for protection of hydraulic actuators. Following 20 weeks immersion at tropical and temperate field exposure sites, the control APS ceramic accumulated significantly greater levels of biofouling compared to the HVOF coatings. More specifically, the magnitude of growth of real-world nuisance hard fouling observed on in-service hydraulic components (eg calcareous tubeworms and encrusting bryozoans) was significantly greater on the APS ceramic relative to HVOF coatings. Possible explanations for the observed patterns include differences in surface topography and roughness, the electrochemical potential of the surfaces and the colour/brightness of the coatings.     

Identification and field and laboratory tests of the sex pheromone of Cerconota anonella Sepp. (Lepidoptera: Oecophoridae)

The Annona fruit borer, Cerconota anonella Sepp., is a serious agricultural pest in many tropical areas of the world. The identification of an attractant for male C. anonella could offer new methods for pest detection and control. A mixture of compounds extracted from female C. anonella elicited antennal depolarization in the male borer. These compounds were identified as octadecanal, 1‐octadecanol, octadecyl acetate, (Z)‐octadec‐9‐enal (Z9‐18:Ald), (Z)‐octadec‐9‐en‐1‐ol (Z9‐18:OH) and [(Z)‐octadec‐9‐enyl] acetate (Z9‐18:Ac) by one‐ and two‐dimensional gas chromatography–mass spectrometry. In laboratory bioassays, synthetic individual compounds as well as synthetic mixtures were found to be attractive to males. In addition, field tests using Delta traps with 1 mg of the ternary mixture composed of Z9‐18:Ac, Z9‐18:Ald and Z9‐18:OH in the ratio of 1 : 3 : 5 caught as many males as traps containing virgin females. The ternary mixture of Z9‐18:Ac, Z9‐18:Ald and Z9‐18:OH was identified as attractant to C. anonella males and can be used to detect and control populations of this insect in Annonaceae plantations.     

Digestive enzymes in marine species. II. Amylase activities in gut from seabream (Sparus aurata), turbot (Scophthalmus maximus) and redfish (Sebastes mentella)

The amylase activity of the digestive tract of three carnivorous fish species (Sparus aurata, Scophthalmus maximus and Sebastes mentella) has been studied. The activity of seabream and turbot showed its maximum at neutral pH (7.0–7.5); meanwhile, the activity of redfish had an optimum pH at 4.5-5.0. The t° function ranged between 35 and 45°C for the three species. The Arrhenius plots of the intestinal activities of seabream and turbot showed breakpoints at temperatures close to those of their physiological activities. High saline concentrations inhibited the activity of seabream and turbot and activated the activity of redfish. Seabream activity was absolutely dependent on calcium ions. On the contrary, redfish activity was only detected in the absence of this metal. Studies carried out by using several effectors suggested that the activities found in these three species are different. Considering our results from a point of view of the environmental conditions of these species, it might be concluded that enzymatic digestion of dietary carbohydrates proceeds at very low rate. Physiological implications are discussed.     

Molecular evidence of a peripatric origin for two sympatric species of field crickets (Gryllus rubens and G. texensis) revealed from coalescent simulations and population genetic tests

Species pairs that differ primarily in characters involved in mating interactions and are largely sympatric raise intriguing questions about the mode of speciation. When species divergence is relatively recent, the footprint of the demographic history during speciation might be preserved and used to reconstruct the biogeography of species divergence. In this study, patterns of genetic variation were examined throughout the geographical range of two cryptic sister taxa of field crickets, Gryllus texensis and G. rubens; mitochondrial cytochrome oxidase I (COI) was sequenced in 365 individuals sampled from 48 localities. Despite significant molecular divergence between the species, they were not reciprocally monophyletic. We devised several analyses to statistically explore what historical processes might have given rise to this genealogical structure. The analyses indicated that the biogeographical pattern of genetic variation does not support a model of recent gene flow between species. Instead, coalescent simulations suggested that the genealogical structure within G. texensis, namely a deep split between two geographically overlapping clades, reflects historical substructure within G. texensis. Additional tests that consider the concentration of G. rubens haplotypes in one of the two G. texensis genetic clusters suggest a model of speciation in which G. rubens was derived from one lineage of a geographically subdivided ancestor. These results indicate that, despite the contemporary sympatry of G. texensis and G. rubens, the data are indicative of an peripatric origin in which G. rubens was derived from one of the two historical partitions in the species currently recognized as G. texensis. This proposed model of species divergence suggests how the interplay of geography and selection may give rise to new species, although this requires testing with multilocus data. Specifically, the model highlights how that geographical partitioning of ancestral variation in the past may augment the selectively driven divergence of characters involved in the reproductive isolation of the species today.     

Activity of organophosphorus insecticides in bacterial tests for mutagenicity and DNA repair--direct alkylation versus metabolic activation and breakdown. II. O,O-dimethyl-O-(1,2-dibromo-2,2-dichloroethyl)-phosphate and two O-ether derivatives of trichlorfon

The following organophosphates were tested for their ability to induce DNA damage in a rec-type repair test with Proteus mirabilis strains PG713 (rec- hcr-) and PG273 (wild-type) and point mutations in the his- strain TA100 of Salmonella typhimurium: O,O-dimethyl-O-(1,2-dibromo-2,2-dichloroethyl)-phosphate (NALED); trichlorfon-O-methyl ether (TCP-O-ME), O,O-dimethyl-(1-methoxy-2,2,2-trichlorethyl)-phosphonate; trichlorfon-O-methyl ether vinyl derivative (TCP-O-MEVD), O,O-dimethyl-(1-methoxy-2,2-dichlorovinyl)-phosphonate. All compounds were negative in the repair test but induced base pair substitutions in S. typhimurium. The mutagenicity of NALED is due to the direct alkylating ability of the parental molecule and to mutagenic metabolites generated by enzymatic splitting of the side chain. Glutathion-dependent enzymes in the S9-mix eliminate the mutagenic activity of NALED completely. Mutation induction by TCP-O-ME and TCP-O-MEVD is predominantly caused by the reactive O-methyl ether configuration of the side chain and is resistant to metabolic inactivation by NADPH- or glutathion-dependent enzymatic pathways in the S9-mix of mice.