Variations in the microbial community of biofilms under different near-wall hydraulic shear stresses in agricultural irrigation systems

Abstract

The hydraulic characteristics along agricultural irrigation pipelines directly affect the local near-wall hydraulic shear stress and biofilm accumulation. However, the variations in the microbial community during the process remain unknown. Based on the Couette-Taylor reactor, a device was developed to accurately control the hydraulic shear stress. The results indicated that the near-wall hydraulic shear stresses showed quadratic correlations with microbial contents (represented by phospholipid fatty acids r?>?0.77, p?<?0.05), and the maximum values were obtained under the shear stresses of 0.20-0.35?Pa. For two types of treated wastewater, the mutual operational taxonomic units among different shear stress treatments showed good consistency (>185). Their corresponding response in the microbial community was represented by the quantitative correlations between the near-wall hydraulic shear stresses and the polymorphism indices (r?>?0.82, p?<?0.05). Among the microorganisms, Firmicutes at the phylum level were significantly affected by the shear stress and significantly influenced the biofilm accumulation process.     

Roughness effects of diatomaceous slime fouling on turbulent boundary layer hydrodynamics

Abstract

Biofilm fouling significantly impacts ship performance. Here, the impact of biofilm on boundary layer structure at a ship-relevant, low Reynolds number was investigated. Boundary layer measurements were performed over slime-fouled plates using high resolution particle image velocimetry (PIV). The velocity profile over the biofilm showed a downward shift in the log-law region (ΔU⁺), resulting in an effective roughness height (k_s) of 8.8?mm, significantly larger than the physical thickness of the biofilm (1.7?±?0.5?mm) and generating more than three times as much frictional drag as the smooth-wall. The skin-friction coefficient, C_f, of the biofilm was 9.0?×?10^?3 compared with 2.9?×?10^?3 for the smooth wall. The biofilm also enhances turbulent kinetic energy (tke) and Reynolds shear stress, which are more heterogeneous in the streamwise direction than smooth-wall flows. This suggests that biofilms increase drag due to high levels of momentum transport, likely resulting from protruding streamers and surface compliance.     

The influence of chlorination timing and concentration on microbial communities in labyrinth channels: implications for biofilm removal

Chlorination is an effective method to control biofilm formation in enclosed pipelines. To date, very little is known about how to control biofilms at the mesoscale in complex pipelines through chlorination. In this study, the dynamic of microbial communities was examined under different residual chlorine concentrations on the biofilms attached to labyrinth channels for drip irrigation using reclaimed water. The results indicated that the microbial phospholipid fatty acids, extracellular polymeric substances, microbial dynamics, and the ace and Shannon microbial diversity indices showed a gradual decrease after chlorination. However, chlorination increased microbial activity by 0.5–19.2%. The increase in the relative abundances of chloride-resistant bacteria (Acinetobacter and Thermomonas) could lead to a potential risk of chlorine resistance. Thus, keeping a low chlorine concentration (0.83?mg l^?1 for 3?h) is effective for controlling biofilm formation in the labyrinth channels.     

Multi-species biofilms defined from drinking water microorganisms provide increased protection against chlorine disinfection

A model biofilm, formed of multiple species from environmental drinking water, including opportunistic pathogens, was created to explore the tolerance of multi-species biofilms to chlorine levels typical of water-distribution systems. All species, when grown planktonically, were killed by concentrations of chlorine within the World Health Organization guidelines (0.2–5.0?mg?l^?1). Higher concentrations (1.6–40-fold) of chlorine were required to eradicate biofilm populations of these strains, ～70% of biofilms tested were not eradicated by 5.0?mg?l^?1 chlorine. Pathogenic bacteria within the model multi-species biofilms had an even more substantial increase in chlorine tolerance; on average ～700–1100?mg?l^?1 chlorine was required to eliminate pathogens from the biofilm, 50–300-fold higher than for biofilms comprising single species. Confocal laser scanning microscopy of biofilms showed distinct 3D structures and multiple cell morphologies and arrangements. Overall, this study showed a substantial increase in the chlorine tolerance of individual species with co-colonization in a multi-species biofilm that was far beyond that expected as a result of biofilm growth on its own.     

Antimicrobial and antifouling polymeric coating mitigates persistence of Pseudomonas aeruginosa biofilm

Abstract

Food wasted due to food spoilage remains a global challenge to the environmental sustainability and security of food supply. In food manufacturing, post-processing contamination of food can occur due to persistent bacterial biofilms, which can be resistant to conventional cleaning and sanitization. The objective was to characterize the efficacy of a polymeric coating in reducing Pseudomonas aeruginosa biofilm establishment and facilitating its removal. Viable cell density of a 48?h biofilm was reduced by 2.10 log cfu cm^?2 on the coated surface, compared to native polypropylene. Confocal laser scanning and electron microscopy indicated reductions in mature biofilm viability and thickness on the coated material. The antifouling coating improved cleanability, with ～2.5 log cfu cm^?2 of viable cells remaining after 105?min cleaning by water at 65?°C, compared to 4.5 log cfu cm^?2 remaining on native polypropylene. Such coatings may reduce the persistence of biofilms in food processing environments, in support of reducing food spoilage and waste     

Characterization of planktonic and biofilm cells from two filamentous cyanobacteria using a shotgun proteomic approach

Abstract

Cyanobacteria promote marine biofouling with significant impacts. A qualitative proteomic analysis, by LC-MS/MS, of planktonic and biofilm cells from two cyanobacteria was performed. Biofilms were formed on glass and perspex at two relevant hydrodynamic conditions for marine environments (average shear rates of 4?s^?1 and 40?s^?1). For both strains and surfaces, biofilm development was higher at 4?s^?1. Biofilm development of Nodosilinea sp. LEGE 06145 was substantially higher than Nodosilinea sp. LEGE 06119, but no significant differences were found between surfaces. Overall, 377 and 301 different proteins were identified for Nodosilinea sp. LEGE 06145 and Nodosilinea sp. LEGE 06119. Differences in protein composition were more noticeable in biofilms formed under different hydrodynamic conditions than in those formed on different surfaces. Ribosomal and photosynthetic proteins were identified in most conditions. The characterization performed gives new insights into how shear rate and surface affect the planktonic to biofilm transition, from a structural and proteomics perspective.     

Inhibition and eradication of Salmonella Typhimurium biofilm using P22 bacteriophage,EDTA and nisin

Abstract

P22 phage >10⁵ PFU ml^?1 could be used to inhibit Salmonella Typhimurium biofilm formation by 55–80%. Concentrations of EDTA >1.25?mM and concentrations of nisin >1,200?µg ml^?1 were also highly effective in reducing S. Typhimurium biofilm formation (≥96% and ≥95% reductions were observed, respectively). A synergistic effect was observed when EDTA and nisin were combined whereas P22 phage in combination with nisin had no synergistic impact on biofilm formation. Triple combination of P22 phage, EDTA and nisin could be also used to inhibit biofilm formation (≥93.2%) at a low phage titer (10² PFU ml^?1), and low EDTA (1.25?mM) and nisin (9.375?µg ml^?1) concentrations. A reduction of 70% in the mature biofilm was possible when 10⁷ PFU ml^?1 of P22 phage, 20?mM of EDTA and 150?μg ml^?1 of nisin were used in combination. This study revealed that it could be possible to reduce biofilm formation by S. Typhimurium by the use of P22 phage, EDTA and nisin, either alone or in combination. Although, removal of the mature biofilm was more difficult, the triple combination could be successfully used for mature biofilm of S. Typhimurium.     

Impact of flow velocity on the dynamic behaviour of biofilm bacteria

Abstract

The impact of flow velocity (FV) on the growth dynamics of biofilms and bulk water heterotrophic plate count (HPC) bacteria in drinking water distribution systems was quantified and modeled by combining a logistic growth model with mass balance equations. The dynamic variations in the specific growth and release rates of biofilm bacteria were also quantified. The experimental results showed that the maximum biofilm biomass did not change when flow velocity was increased from 20 to 40 cm s^?1, but was significantly affected when flow velocity was further increased to 60 cm s^?1. Although the concentration of biofilm bacteria was substantially reduced by the higher shear stress, the concentration of bacteria in the bulk fluid was slightly increased. From this it is estimated that the specific growth rate and specific release rate of biofilm bacteria had doubled. The specific release (detachment) rate was dependent on the specific growth rate of the biofilm bacteria.     

Hyperbaric biofilms on engineering surfaces formed in the deep sea

Biofouling is a major problem for long-term deployment of sensors in the marine environment. This study showed that significant biofilm formation occurred on a variety of artificial materials (glass, copper, Delrin^? and poly-methyl methacrylate [PMMA]) deployed for 10?days at a depth of 4700?m in the Cayman Trough. Biofilm surface coverage was used as an indicator of biomass. The lowest biofilm coverage was on copper and PMMA. Molecular analyses indicated that bacteria dominated the biofilms found on copper, Delrin^? and PMMA with 75, 55 and 73% coverage, respectively. Archea (66%) were dominant on the glass surface simulating interior sensor conditions, whereas Eukarya comprised the highest percentage of microflora (75%) on the glass simulating the exterior of sensors. Analysis of Denaturing Gradient Gel Electrophoresis profiles indicated that copper and Delrin^? shared the same community diversity, which was not the case for glass and PMMA, or between PMMA and copper/Delrin^?. Sequence alignment matches belonged exclusively to uncultivable microorganisms, most of which were not further classified. One extracted sequence found on glass was associated with Cowellia sp., while another extracted from the PMMA surface was associated with a bacterium in the Alterominidaceae, both γ-proteobacteria. The results demonstrate the necessity of understanding biofilm formation in the deep sea and the potential need for mitigation strategies for any kind of long-term deployment of remote sensors in the marine environment.     

In vitro and ex vivo biofilms of dermatophytes: a new panorama for the study of antifungal drugs

Abstract

This study describes an ex vivo model that creates an environment for dermatophyte biofilm growth, with features that resemble those of in vivo conditions, designing a new panorama for the study of antifungal susceptibility. Regarding planktonic susceptibility, MIC ranges were 0.125-1?µg ml^?1 for griseofulvin and 0.000097-0.25?µg ml^?1 for itraconazole and terbinafine. sMIC50 ranges were 2->512?µg ml^?1 for griseofulvin and 0.25->64?µg ml^?1 for itraconazole and terbinafine. CLSM images demonstrated a reduction in the amount of cells within the biofilm, but hyphae and conidia were still observed and biofilm biomass was maintained. SEM analysis demonstrated a retraction in the biofilm matrix, but fungal structures and water channels were preserved. These results show that ex vivo biofilms are more tolerant to antifungal drugs than in vitro biofilms, suggesting that environmental and nutritional conditions created by this ex vivo model favor biofilm growth and robustness, and hence drug tolerance.     

Population diversity in model potable water biofilms receiving chlorine or chloramine residual

Abstract

Most water utilities use chlorine or chloramine to produce potable water. These disinfecting agents react with water to produce residual oxidants within a water distribution system (WDS) to control bacterial growth. While monochloramine is considered more stable than chlorine, little is known about the effect it has on WDS biofilms. Community structure of 10-week old WDS biofilms exposed to disinfectants was assessed after developing model biofilms from unamended distribution water. Four biofilm types were developed on polycarbonate slides within annular reactors while receiving chlorine, chloramine, or inactivated disinfectant residual. Eubacteria were identified through 16S rDNA sequence analysis. The model WDS biofilm exposed to chloramine mainly contained Mycobacterium and Dechloromonas sequences, while a variety of alpha- and additional beta-proteobacteria dominated the 16S rDNA clone libraries in the other three biofilms. Additionally, bacterial clones distantly related to Legionella were found in one of the biofilms receiving water with inactivated chlorine residual. The biofilm reactor receiving chloraminated water required increasing amounts of disinfectant after 2 weeks to maintain chlorine residual. In contrast, free chlorine residual remained steady in the reactor that received chlorinated water. The differences in bacterial populations of potable water biofilms suggest that disinfecting agents can influence biofilm development. These results also suggest that biofilm communities in distribution systems are capable of changing in response to disinfection practices.     

Antimicrobial effects of a pulsed electromagnetic field: an in vitro polymicrobial periodontal subgingival biofilm model

Abstract

The objective was to test the influence of a pulsed electromagnetic field (PEMF) on bacterial biofilm colonization around implants incorporated with healing abutments. Healing abutments with (test group) and without (control group) active PEMF devices were placed in a multispecies biofilm consisting of 31 different bacterial species. The biofilm composition and total bacterial counts (x10⁵) were analyzed by checkerboard DNA-DNA hybridization. After 96?h, the mean level of 7 out of the 31 bacterial species differed significantly between groups, namely Eubacterium nodatum, Fusobacterium nucleatum ssp. nucleatum, Streptococcus intermedius, Streptococcus anginosus, Streptococcus mutans, Fusobacterium nucleatum ssp. Vicentii and Capnocytophaga ochracea were elevated in the control group (p?<?0.05). The mean total bacterial counts were lower in the Test group vs the control group (p?<?0.05). An electromagnetic healing cap had antimicrobial effects on the bacterial species and can be used to control bacterial colonization around dental implants. Further clinical studies should be conducted to confirm these findings.     

Analysis of the mechanical stability and surface detachment of mature Streptococcus mutans biofilms by applying a range of external shear forces

Well-established biofilms formed by Streptococcus mutans via exopolysaccharide matrix synthesis are firmly attached to tooth surfaces. Enhanced understanding of the physical properties of mature biofilms may lead to improved approaches to detaching or disassembling these highly organized and adhesive structures. Here, the mechanical stability of S. mutans biofilms was investigated by determining their ability to withstand measured applications of shear stress using a custom-built device. The data show that the initial biofilm bulk (~ 50% biomass) was removed after exposure to 0.184 and 0.449 N m^?2 for 67 and 115 h old biofilms. However, removal of the remaining biofilm close to the surface was significantly reduced (vs initial bulk removal) even when shear forces were increased 10-fold. Treatment of biofilms with exopolysaccharide-digesting dextranase substantially compromised their mechanical stability and rigidity, resulting in bulk removal at a shear stress as low as 0.027 N m^?2 and > a two-fold reduction in the storage modulus (G′). The data reveal how incremental increases in shear stress cause distinctive patterns of biofilm detachment, while demonstrating that the exopolysaccharide matrix modulates the resistance of biofilms to mechanical clearance.     

Protective effect exerted by soil phosphorus on soybean subjected to arsenic and fluoride

Objetive: Arsenic (As) and fluoride (F) are found in groundwater and soils around the world, causing different problems to crops. Because these elements compete against phosphorus (P) in soils and plants, their relationship is complex. The aim of this work was to study the oxidative stress of soybean plants subjected to different concentrations of As and F, and the effect of P.

Methods: The following 10 treatments were carried out in each of two soils with different P content: three As levels (low 10?mg?As?kg^-1, medium 50?mg?As?kg^?1 and high 100?mg As kg^?1), three F levels (low 160?mg?F?kg^?1, medium 250?mg?F?kg^?1 and high 500?mg?F?kg^?1) and three As?+?F levels (same concentrations), and the control treatment (soil with the background As and F concentrations) Lipid peroxidation, chlorophyll, gluthatione contents and antioxidant enzymes activities were determination.

Results: Increased lipid peroxidation and alterations in glutathione content, catalase, superoxide dismutase and peroxidase activities as well as in chlorophyll content revealed that As causes higher oxidative stress in plants grown in soils with low P content.

Conclusion: Stress parameters in F treatments were less affected. Plants grown in soils enriched with P revealed a decrease in the toxic effects caused by As and F.     

Inactivation of Pseudomonas aeruginosa biofilms formed under high shear stress on various hydrophilic and hydrophobic surfaces by a continuous flow of ozonated water

Abstract

The inactivation of Pseudomonas aeruginosa biofilms grown on glass under high shear stress and exposed to a range of dissolved ozone concentrations (2, 5 and 7?ppm) at 10 and 20?min was investigated. The regression equation, log reduction (biofilm)?=?0.64?+?0.59×(C – 2)?+?0.33×(T – 10), described the dependence of biofilm inactivation on the dissolved ozone concentration (C, ppm) and contact time (T, min). The predicted D-values were 11.1, 5.7 and 2.2?min at 2, 5 and 7?ppm, respectively. Inactivation of biofilms grown on various surfaces was tested at a single dissolved ozone concentration of 5?ppm and a single exposure time of 20?min. Biofilms grown on plastic materials showed inactivation results similar to that of biofilms on glass, while biofilms grown on ceramics were statistically significantly more difficult to inactivate, suggesting the importance of utilizing non-porous materials in industrial and clinical settings.     

2-Hydroxy-4-methoxybenzaldehyde from Hemidesmus indicus is antagonistic to Staphylococcus epidermidis biofilm formation

Abstract

Staphylococcus epidermidis (SE) is an opportunistic nosocomial pathogen that accounts for recalcitrant device-related infections worldwide. Owing to the growing interest in plants and their secondary metabolites targeting bacterial adhesion, this study was intended to uncover the anti-biofilm potential of Hemidesmus indicus and its major constituent 2-hydroxy-4-methoxybenzaldehyde (HMB) against SE. The minimum biofilm inhibitory concentration (MBIC) of H. indicus root extract and HMB were found to be 500 and 250?µg ml^?1, respectively. The results of time-dependent biofilm inhibition and mature biofilm disruption assays confirmed that HMB targets initial cell adhesion. Furthermore, interference by HMB in the expression of adhesin genes (icaA, aap and bhp) and biofilm components was associated with an increased susceptibility of SE to oxidative stress and antibiotics. To conclude, this study reports for the first time HMB as a potential drug against SE biofilms.     

Temporal variability of algicidal and growth-inhibiting bacteria at an eelgrass bed in the Ariake Sea,Japan

Abstract

Temporal changes of algicidal and growth-inhibiting bacteria on the fish-killing raphidophyte flagellate, Chattonella antiqua, at an eelgrass (Zostera marina) bed in southern Ariake Sea, Japan in 2011 was investigated. The maximum value (5.1?×?10⁷ CFU g^?1 wet leaf) of algicidal bacteria (AB) was detected from a biofilm formed on Z. marina on August 1 when AB in the adjacent seawater had also peaked (1.2?×?10⁴ CFU mL^?1). Two causative bacteria isolated from the biofilm and seawater on August 1 were both identified to be of the genus Alteromonas (γ-proteobacteria). AB and growth-inhibiting bacteria (GIB) were present from the beginning of sampling (May 20) to August 26, fluctuating between 8.6?×?10² and 1.2?×?10⁴, 1.2?×?10³ and 9.3?×?10³ CFU mL^?1, respectively. The highest phytoplankton density observed was 6423 cells mL^?1 on September 29 and was comprised of centric diatoms such as Chaetoceros, Skeletonema, and Thalassiosira and coincided with the absence of AB and GIB where the decline of Z. marina was also observed. These findings provide a new ecological insight on AB and GIB associated with Z. marina beds, indicating eelgrass beds have the important role as the nursery of those bacteria that can be utilized as mitigation measures of harmful algal blooms (HABs) in the future.     

Influence of biofilms on iron and manganese deposition in drinking water distribution systems

Although health risk due to discoloured water is minimal, such water continues to be the source of one of the major complaints received by most water utilities in Australia. Elevated levels of iron (Fe) and/or manganese (Mn) in bulk water are associated with discoloured water incidents. The accumulation of these two elements in distribution systems is believed to be one of the main causes for such elevated levels. An investigation into the contribution of pipe wall biofilms towards Fe and Mn deposition, and discoloured water events is reported in this study. Eight laboratory-scale reactors were operated to test four different conditions in duplicate. Four reactors were exposed to low Fe (0.05?mg?l^?1) and Mn (0.02?mg?l^?1) concentrations and the remaining four were exposed to a higher (0.3 and 0.4?mg?l^?1 for Fe and Mn, respectively) concentration. Two of the four reactors which received low and high Fe and Mn concentrations were chlorinated (3.0?mg?l^?1 of chlorine). The biological activity (measured in terms of ATP) on the glass rings in these reactors was very low (～1.5 ng cm^?2 ring). Higher concentrations of Fe and Mn in bulk water and active biofilms resulted in increased deposition of Fe and Mn on the glass rings. Moreover, with an increase in biological activity, an increase in Fe and Mn deposition was observed. The observations in the laboratory-scale experiments were in line with the results of field observations that were carried out using biofilm monitors. The field data additionally demonstrated the effect of seasons, where increased biofilm activities observed on pipe wall biofilms during late summer and early autumn were found to be associated with increased deposition of Fe and Mn. In contrast, during the cooler months, biofilm activities were a magnitude lower and the deposited metal concentrations were also significantly less (ie a drop of 68% for Fe and 86% for Mn). Based on the laboratory-scale investigations, detachment of pipe wall biofilms due to cell death or flow dynamics could release the entrapped Fe and Mn into the bulk water, which could lead to a discoloured water event. Hence, managing biofilm growth on drinking water pipelines should be considered by water utilities to minimize accumulation of Fe and Mn in distribution networks.     

Inhibition of methicillin-resistant Staphylococcus aureus (MRSA) biofilm by cationic poly (D,L-lactide-co-glycolide) nanoparticles

Abstract

The emergent need for new treatment methods for multi-drug resistant pathogens such as methicillin-resistant Staphylococcus aureus (MRSA) has focused attention on novel potential tools like nanoparticles (NPs). In the present study, a drug-free cationic nanoparticles (CNPs) system was developed and its anti-MRSA effects were firstly investigated. The results showed that CNPs (261.7?nm, 26.1?mv) showed time- and concentration-dependent activity against MRSA growth, killing ～ 90% of planktonic bacterial cells in 3?h at 400?μg ml^?1, and completely inhibiting biofilm formation at 1000?μg ml^?1. Moreover, CNPs at 400?μg ml^?1 reduced the minimum inhibitory concentration (MIC) of vancomycin on inhibition of planktonic MRSA growth (～ 25%) and biofilm formation (～ 50%). The CNPs–bacteria interaction force was up to 22 nN. Overall, these data suggest that CNPs have a good potential in clinical applications for the prevention and treatment of MRSA infection.     

The corrosion behaviour of galvanized steel in cooling tower water containing a biocide and a corrosion inhibitor

The corrosion behaviour of galvanized steel in cooling tower water containing a biocide and a corrosion inhibitor was investigated over a 10-month period in a hotel. Planktonic and sessile numbers of sulphate reducing bacteria (SRB) and heterotrophic bacteria were monitored. The corrosion rate was determined by the weight loss method. The corrosion products were analyzed by energy dispersive X-ray spectroscopy and X-ray diffraction. A mineralized, heterogeneous biofilm was observed on the coupons. Although a biocide and a corrosion inhibitor were regularly added to the cooling water, the results showed that microorganisms, such as SRB in the mixed species biofilm, caused corrosion of galvanized steel. It was observed that Zn layers on the test coupons were completely depleted after 3?months. The Fe concentrations in the biofilm showed significant correlations with the weight loss and carbohydrate concentration (respectively, p?<?0.01 and p?<?0.01).