Microalgae aquaculture feeds

Microalgae feeds are currently used in relatively small amounts in aquaculture, mainly for the production of larvae and juvenile shell- and finfish, as well as for raising the zooplankton required for feeding of juvenile animals. The blue-green algaSpirulina is used in substantial amounts (over 100 t y^–1) as a fish and shrimp feed, and even larger markets can be projected if production costs could be reduced. Another potential large-scale application of microalgae is the cultivation ofHaematococcus for the production of the carotenoid astaxanthin, which gives salmon flesh its reddish color. In the long-term microalgae biomass high in lipids (omega-3 fatty acids) may be developed as substitutes for fish oil-based aquaculture feeds. In shrimp ponds the indigenous algal blooms supply a part of the dietary requirements of the animals, but it is difficult to maximize algal productivities. A separate algal production system could feed the shrimps and minimize the need for added feed. Bivalves feed essentially exclusively on marine microalgae throughout their life cycle. The development of cultivation technologies for such microalgae would allow the onshore production of these animals, with greatly improved product quality and safety.This paper was presented at the Symposium on Applied Phycology at the Fourth International Phycological Congress, Duke University.     

Heterotrophic production of long chain omega-3 fatty acids utilizing algae and algae-like microorganisms

Although some interest in growing microalgae heterotrophically for the production of pigments was generated in the 1960s, only minimal commercial research was focused on this type of production technology until the 1980s. Recent developments indicating the nutritional and pharmaceutical importance of long chain omega-3 polyunsaturated fatty acids in the human diet have stimulated interest in microalgae as a source of these vital compounds, for they are the primary producers of these fatty acids in marine food webs. Food and pharmaceutical quality production can be enhanced both by the degree of process control and by the sterility achieved through a fermentation process, when compared to outdoor solar pond production. The data presented illustrate that microalgal-based heterotrophic production systems can exhibit omega-3 fatty acid productivities 2–3 orders of magnitude greater than those of outdoor pond systems. Additionally, long chain omega-3 fatty acid productivities reported for the microalgal fermentation systems are 1–2 orders of magnitude greater than productivities reported for fungal or bacterial systems.     

Mild disintegration methods of microalgae–bacteria flocs from wastewater treatment

The use of microalgae in biological wastewater treatment has been widely studied. However, there is a dearth of information about estimating the microalgae and bacteria concentrations. In order to maintain a stable algal-bacterial system, it is necessary to quantify both the algal and bacterial biomasses. Typically, microalgae and bacteria from flocs in activated sludge contribute to better biomass settleability. However, flocs cause problems when it comes to estimating the individual biomass concentrations of microalgae and bacteria in a symbiotic algae-bacteria aggregate. This study aimed to find the best disintegration treatment with low influence on the viability of the microalgal cell determined by its photosynthetic activity. In the present work, biological (enzyme solution), chemical (formaldehyde), mechanical (glass bead-beating), and physical (sonication) treatments were performed on microalgae–bacteria flocs (ALBA flocs) to disintegrate the community as a pre-treatment step in order to develop a method for estimating the algal and bacterial concentration and to quantify the degree of disintegration. The effectiveness of the methods to disintegrate ALBA flocs in descending order are the following: sonication, bead-beating, formaldehyde and enzyme application. Sonication treatment (40 W, 6 min) showed the best disintegration performance of the microalgal-bacterial flocs, up to 90 % with 17 % loss of the algal photosynthetic activity. Bead-beating (3 mm diameter, 80 s) achieved 80 % of disintegration with only 6 % loss of its photosynthetic activity. These results demonstrate the possibility of mild disintegration of compact ALBA flocs without having any adverse impact on the microalgae cell. After these treatments, it becomes possible to estimate the individual biomass concentrations of algae and bacteria manually such as with a cell-counting chamber.     

二氧化碳减排产柴油微藻培养体系研究进展

污水资源化、二氧化碳减排及微藻生物柴油是当前能源与环境领域的前沿课题。以下围绕污水及烟道气资源化培养产油微藻的培养体系,就藻种、营养条件、培养方式、培养环境及微藻生物反应器等影响产油微藻培养的因素研究进展进行了综述。在综述的基础上提出：由于微藻具有特殊营养方式,通过藻种筛选、微藻营养条件和培养环境的优化以及高效光生物反应器和生产工艺等的创新,可利用污水进行产油微藻生产,以获得生物柴油等高附加值产品,实现微藻生物能源、污水资源化处理和CO2减排三者高度耦合的产油微藻生产体系,从而减少微藻培养费用及污水处理费用,因此,该体系具有重要的环境、社会、经济价值和商业化应用前景。     

Cell fragility — The key problem of microalgae mass production in closed photobioreactors

The gap between the theoretical biological potential of microalgae and the biomass productivity obtained with algal culture in tubular biophotoreactors is due to a reduced growth rate related to hydrodynamic stress of pumping. High levels of mixing are necessary to reach a turbulent flow of the culture, in order to optimize the light regime. The optimal conditions of pumping to produce this significant liquid mixing may produce some cell damage. Factors affecting this hydrodynamic stress (geometry of the bioreactor involved, type of pump utilized, morphology of algal cells, physiological conditions of microalgae, etc.) are discussed.     

Bioflocculation as an innovative harvesting strategy for microalgae

Microalgae are a promising new source of biomass for the production of third generation biofuels but, so far, the majority of microalgal biomass has been used for high-value applications. New low-cost technologies are needed to make the production and processing of microalgae economically feasible for low-value applications. A major challenge lies in the harvesting of microalgae, which requires a cost-efficient separation technology. Flocculation, especially bioflocculation, is an attractive low-cost separation technology. Various new bioflocculation strategies have been claimed to generate major advances in cost-efficient harvesting. Here, we review the recent advances in bioflocculation based on algal–bacterial, algal–fungal, or algal–algal interactions within the framework of microalgae biomass harvesting for biofuel production. We also discuss recent advances using infochemicals and genetic engineering for the induction of bioflocculation.     

Microalgal production — A close look at the economics

Worldwide, microalgal biofuel production is being investigated. It is strongly debated which type of production technology is the most adequate. Microalgal biomass production costs were calculated for 3 different micro algal production systems operating at commercial scale today: open ponds, horizontal tubular photobioreactors and flat panel photobioreactors. For the 3 systems, resulting biomass production costs including dewatering, were 4.95, 4.15 and 5.96 € per kg, respectively. The important cost factors are irradiation conditions, mixing, photosynthetic efficiency of systems, medium- and carbon dioxide costs. Optimizing production with respect to these factors, a price of € 0.68 per kg resulted. At this cost level microalgae become a promising feedstock for biodiesel and bulk chemicals.

Summary

Photobioreactors may become attractive for microalgal biofuel production.     

Intensive rotifer cultures using chemostats

Continuous production of the rotifer Brachionus plicatilis rotundiformis (S-type) in an intensive chemostat culture system has been investigated. The production dynamics of rotifers in relation to different flow rates and feed regimes show that the growth rate and production depends on the type of algal feed and flow rate utilized in the culture system. It was possible to achieve a mean production of up to 318.84 × 10⁶ rotifers m^–3 d^–1 at a flow rate of 6 1 h^–1 in 100 1 chemostats and up to 261.21 × 10⁶ rotifers m^–3 d^–1 at a flow rate of 40 1 h –1 while using 1 m³ capacity rotifer chemostats as production units. The 3 fatty acid composition of rotifers while using Chlorella and Nannochloropsis in the culture system has been described. The results of this investigation show that the rotifer productivity in the continuous culture system is considerably higher than in any of the conventional culture systems described to date for aquacultural purposes.This research was financed by the Kuwait Foundation for the Advancement of Sciences (KFAS), Kuwait, under a contract research project code 86-04-02.     

The extensive commercial cultivation of Dunaliella salina

Betatene Ltd has established an extensive system for cultivation of D. salina for β-carotene production at Whyalla in South Australia.The operation, believed to be the largest area under man-made algal cultivation in the world, covers over 300 hectares in area, divided into three major cultivation lakes. A necessary requirement of the extensive system is to have a cost-effective harvesting system to handle the relatively large culture volumes. The extraction plant at the lakeside is designed to handle up to one million litre per hour in four parallel modules using a proprietary purely physical harvesting system.Current products are a crystalline β-carotene preparation for food colour applications, a high solubility preparation dispersed in soya bean oil for dietary supplementation and a dried powdered algal extract as an animal feed ingredient.     

Strategies to enhance production of microalgal biomass and lipids for biofuel feedstock

ABSTRACT

Microalgae have enormous potential as feedstock for biofuel production compared with other sources, due to their high areal productivity, relatively low environmental impact, and low impact on food security. However, high production costs are the major limitation for commercialization of algal biofuels. Strategies to maximize biomass and lipid production are crucial for improving the economics of using microalgae for biofuels. Selection of suitable algal strains, preferably from indigenous habitats, and further improvement of those ‘platform strains’ using mutagenesis and genetic engineering approaches are desirable. Conventional approaches to improve biomass and lipid productivity of microalgae mainly involve manipulation of nutritional (e.g. nitrogen and phosphorus) and environmental (e.g. temperature, light and salinity) factors. Approaches such as the addition of phytohormones, genetic and metabolic engineering, and co-cultivation of microalgae with yeasts and bacteria are more recent strategies to enhance biomass and lipid productivity of microalgae. Improvement in culture systems and the use of a hybrid system (i.e. a combination of open ponds and photobioreactors) is another strategy to optimize algal biomass and lipid production. In addition, the use of low-cost substrates such as agri-industrial wastewater for the cultivation of microalgae will be a smart strategy to reduce production costs. Such systems not only generate high algal biomass and lipid productivity, but are also useful for bioremediation of wastewater and bioremoval of waste CO₂. The aim of this review is to highlight the advances in the use of various strategies to enhance production of algal biomass and lipids for biofuel feedstock.     

小球藻的甲基磺酸乙酯诱变及产EPA的条件研究

小球藻是海水养殖系统中常用的单细胞微藻,繁殖能力强,易于规模化培养,且可合成不饱和脂肪酸EPA、DHA等多种活性物质,在医疗和保健品开发中具有很高的应用价值。目前商业化培养的藻种多从自然界中直接获得,活性物质的产量较低且藻种易退化。为了获得EPA产量更高的藻种,该研究利用0.6%EMS对小球藻进行诱变,利用尼罗红染色法进行初筛并通过单细胞分离技术得到1株突变株EC1,通过气象色谱测定其EPA产量。结果表明:与出发藻株相比,突变株EPA(二十碳五烯酸)产量提高了8.97%。根据单因素试验确定突变株生长及产EPA的合适培养条件,再通过正交试验筛选出培养条件的优化组合,表明突变藻EC1株产EPA的较适条件为NaNO_375 mg·L~-1,p H7.5,昼夜温度17~15℃,接种量为12%,在此条件下培养7d其EPA的产量可达25.38 mg·g~-1,传代实验表明突变藻株具有较好的遗传稳定性。该研究结果为进一步利用小球藻规模化生产EPA奠定了基础。     

Nutrient removal and biomass production: advances in microalgal biotechnology for wastewater treatment

Owing to certain drawbacks, such as energy-intensive operations in conventional modes of wastewater treatment (WWT), there has been an extensive search for alternative strategies in treatment technology. Biological modes for treating wastewaters are one of the finest technologies in terms of economy and efficiency. An integrated biological approach with chemical flocculation is being conventionally practiced in several-sewage and effluent treatment plants around the world. Overwhelming responsiveness to treat wastewaters especially by using microalgae is due to their simplest photosynthetic mechanism and ease of acclimation to various habitats. Microalgal technology, also known as phycoremediation, has been in use for WWT since 1950s. Various strategies for the cultivation of microalgae in WWT systems are evolving faster. However, the availability of innovative approaches for maximizing the treatment efficiency, coupled with biomass productivity, remains the major bottleneck for commercialization of microalgal technology. Investment costs and invasive parameters also delimit the use of microalgae in WWT. This review critically discusses the merits and demerits of microalgal cultivation strategies recently developed for maximum pollutant removal as well as biomass productivity. Also, the potential of algal biofilm technology in pollutant removal, and harvesting the microalgal biomass using different techniques have been highlighted. Finally, an economic assessment of the currently available methods has been made to validate microalgal cultivation in wastewater at the commercial level.     

Algal biotechnology industries and research activities in China

In old China there were very few people engaged in the study of the algae,but in new China, freshwater and marine algae are studied by over onehundred old and new phycologists. There is now an algal biotechnologyindustry consisting of an aquaculture industry, producing large amounts ofthe seaweeds Laminaria, Porphyra, Undaria, Gracilaria,eucheumoids, and the microalgae Dunaliella and Spirulina. There is also a phycocolloid industry, producing algin, agar andcarrageenan; an industry producing chemicals and drugs, such as iodine,mannitol, phycocyanin, -carotene, PSS (propylene glycol alginatesulfate) and FPS (fucose-containing sulfated polysaccharides) and anindustry producing food, feed and fertilizer. The Laminariacultivation industry produces about 900,000 t dry Laminaria,probably the largest producer in the world and 13,000 t algin,undoubtedly one of the largest algin producer in the world.     

Influence of diet on sex differentiation of Hippolyte inermis Leach (Decapoda: Natantia) in the field

The gut contents of the shrimp Hippolyte inermis were investigated for 1 year along a depth transect through a seagrass bed. Besides size, sex and weight of all individuals were recorded. The diets of immature and adult individuals were compared to detect any influence of food on sex development, since previous investigations indicated a correlation of the life cycle of this protandric species with the abundance of algal food in the environment, and laboratory experiments demonstrated the effect of diatoms of the genus Cocconeis on the direct development of females. Results indicated that the shrimp is an opportunistic herbivore, able to feed on both plant and animal items, with a preference for macroalgae and diatoms present on the leaves of Posidonia oceanica. Small females, deriving from direct differentiation, had a diet significantly different from that of males. The difference was due to a larger abundance of microalgae in the guts of young females. The influence of microalgal food on the sex reversal mechanism of this species, previously detected through laboratory experiments, was demonstrated to control the life cycle of H. inermis in the field.     

The commercial potential of the common sea urchin Echinus esculentus from the west coast of Scotland

Sea urchin roe is a valuable food product. The commercial potential of Echinus esculentusL. (Echinodermata: Echinoidea) was assessed both by surveying field populations and gonad growth in response to artificial feeds. Urchins were collected from four locations on the Scottish west coast between June and August of 1998. The roe content was found to be of variable quality. A relatively low percentage of urchins (34.9%) had roe which was considered marketable both in terms of yield and colour. Urchins with a marketable yield of roe were found where algal growth or encrusting organisms were most prolific. Good roe colours and high roe yields were not necessarily coincident. The data suggest an urchin fishery is likely to be impractical economically. In tank-based trials large E. esculentus were fed either commercially available salmon feed, a pelletised urchin diet or the macroalgae Laminaria saccharina. Urchins fed the artificial diets increased in test diameter during the 24-week experiment. At the end of the trial urchins fed salmon feed had a significantly higher gonad and alimentary index than those in the other treatments. E. esculentusis able to successfully exploit a diet rich in animal-origin oils. The diets also influenced gonad colour. The proportion of urchins with marketable gonad colours was highest (85%) in the treatment receiving salmon feed. As this species appears robust in culture and as artificial diets promote somatic and gonadal growth, an investigation into the practicalities of a fully farmed approach to gonad production may be worthwhile.     

Life-cycle assessment of microalgae culture coupled to biogas production

Due to resource depletion and climate change, lipid-based algal biofuel has been pointed out as an interesting alternative because of the high productivity of algae per hectare and per year and its ability to recycle CO₂ from flue gas. Another option for taking advantage of the energy content of the microalgae is to directly carry out anaerobic digestion of raw algae in order to produce methane and recycle nutrients (N, P and K). In this study, a life-cycle assessment (LCA) of biogas production from the microalgae Chlorella vulgaris is performed and the results are compared to algal biodiesel and to first generation biodiesels. These results suggest that the impacts generated by the production of methane from microalgae are strongly correlated with the electric consumption. Progresses can be achieved by decreasing the mixing costs and circulation between different production steps, or by improving the efficiency of the anaerobic process under controlled conditions. This new bioenergy generating process strongly competes with others biofuel productions.     

Microalgae as a raw material for biofuels production

Biofuels demand is unquestionable in order to reduce gaseous emissions (fossil CO₂, nitrogen and sulfur oxides) and their purported greenhouse, climatic changes and global warming effects, to face the frequent oil supply crises, as a way to help non-fossil fuel producer countries to reduce energy dependence, contributing to security of supply, promoting environmental sustainability and meeting the EU target of at least of 10% biofuels in the transport sector by 2020. Biodiesel is usually produced from oleaginous crops, such as rapeseed, soybean, sunflower and palm. However, the use of microalgae can be a suitable alternative feedstock for next generation biofuels because certain species contain high amounts of oil, which could be extracted, processed and refined into transportation fuels, using currently available technology; they have fast growth rate, permit the use of non-arable land and non-potable water, use far less water and do not displace food crops cultures; their production is not seasonal and they can be harvested daily. The screening of microalgae (Chlorella vulgaris, Spirulina maxima, Nannochloropsis sp., Neochloris oleabundans, Scenedesmus obliquus and Dunaliella tertiolecta) was done in order to choose the best one(s), in terms of quantity and quality as oil source for biofuel production. Neochloris oleabundans (fresh water microalga) and Nannochloropsis sp. (marine microalga) proved to be suitable as raw materials for biofuel production, due to their high oil content (29.0 and 28.7%, respectively). Both microalgae, when grown under nitrogen shortage, show a great increase (~50%) in oil quantity. If the purpose is to produce biodiesel only from one species, Scenedesmus obliquus presents the most adequate fatty acid profile, namely in terms of linolenic and other polyunsaturated fatty acids. However, the microalgae Neochloris oleabundans, Nannochloropsis sp. and Dunaliella tertiolecta can also be used if associated with other microalgal oils and/or vegetable oils.     

Removal of nitrogen and phosphorus from wastewater using microalgae immobilized on twin layers: an experimental study

Removal of nitrogen and phosphorus from wastewater by two green microalgae (Chlorella vulgaris and Scenedesmus rubescens) was investigated using a novel method of algal cell immobilization, the twin-layer system. In the twin-layer system, microalgae are immobilized by self-adhesion on a wet, microporous, ultrathin substrate (the substrate layer). Subtending the substrate layer, a second layer, consisting of a macroporous fibrous tissue (the source layer), provides the growth medium. Twin-layers effectively separate microalgae from the bulk of their growth medium, yet allow diffusion of nutrients. In the twin-layer system, algae remain 100% immobilized, which compares favourably with gel entrapment methods for cell immobilization. Both microalgae removed nitrate efficiently from municipal wastewater. Using secondary, synthetic wastewater, the two algae also removed phosphate, ammonium and nitrate to less than 10% of their initial concentration within 9 days. It is concluded that immobilization of C. vulgaris and S. rubescens on twin-layers is an effective means to reduce nitrogen and phosphorus levels in wastewater.     

一株可增强莱茵衣藻耐盐能力细菌MEZX29的分离与鉴定

【背景】水体中的藻类、细菌及这些微生物之间的相互作用对水体生态系统的功能有着重要作用。近年来,一些河流、湖泊等淡水资源的盐渍化不断加重,对水体生态系统造成严重影响。然而,高盐胁迫条件如何影响藻类与其他细菌的相互作用,以及是否存在能够促进藻类耐盐能力的有益细菌等问题尚未得到深入研究。【目的】分离和鉴定可以促进淡水藻类莱茵衣藻抗盐能力的细菌,并开展相关机制分析。【方法】通过富集培养、筛选和共接种实验,获得可以促进衣藻耐盐的细菌;基于活细胞浓度、叶绿素含量等参数评价衣藻在不同条件下的生长能力;对菌株进行16S rRNA基因序列分析和基因组分析,预测其可能的菌藻相互作用机制。【结果】获得一株在250-290 mmol/L NaCl条件下可以显著增强衣藻耐盐能力的菌株MEZX29,16S rRNA基因序列分析表明,该菌可能属于Rhodococcus qingshengii;基因组分析结果表明,该细菌含有参与糖代谢、乙烯合成、生物膜形成等途径的基因,这些基因可能在促进衣藻抗盐过程中起到重要作用。【结论】Rhodococcus qingshengiiMEZX29可以增强莱茵衣藻21gr抵抗高盐胁迫的能力,为研究藻类与其他微生物之间的有益相互作用提供了新的材料。     

Isolation and identification of antialgal substances produced byPseudomonas aeruginosa

Pseudomonas aeruginosa strongly inhibited the growth of green microalgae and cyanobacteria by the release of low molecular weight, thermoresistant factors. The antialgal substances were resistant to various enzymes and remained active in agar after a 3-months storage period at 4 °C in the absence of light. The results indicate that inhibition of algal growth was mediated by the phenazine pigments released by the bacterium. Pyocyanine and an unidentified pale blue pigment had no effect on algal growth, whereas 1-hydroxyphenazine and oxychlororaphine showed strong antialgal activity.Groupe de Recherche en Recyclage Biologique et AquicultureDépartement des Sciences et Technologie des Aliments