Investigation of a peptide responsible for amyloid fibril formation of beta 2-microglobulin by achromobacter protease I.

To obtain insight into the mechanism of amyloid fibril formation from beta(2)-microglobulin (beta2-m), we prepared a series of peptide fragments using a lysine-specific protease from Achromobacter lyticus and examined their ability to form amyloid fibrils at pH 2.5. Among the nine peptides prepared by the digestion, the peptide Ser(20)-Lys(41) (K3) spontaneously formed amyloid fibrils, confirmed by thioflavin T binding and electron microscopy. The fibrils composed of K3 peptide induced fibril formation of intact beta2-m with a lag phase, distinct from the extension reaction without a lag phase observed for intact beta2-m seeds. Fibril formation of K3 peptide with intact beta2-m seeds also exhibited a lag phase. On the other hand, the extension reaction of K3 peptide with the K3 seeds occurred without a lag phase. At neutral pH, the fibrils composed of either intact beta2-m or K3 peptide spontaneously depolymerized. Intriguingly, the depolymerization of K3 fibrils was faster than that of intact beta2-m fibrils. These results indicated that, although K3 peptide can form fibrils by itself more readily than intact beta2-m, the K3 fibrils are less stable than the intact beta2-m fibrils, suggesting a close relation between the free energy barrier of amyloid fibril formation and its stability.     

Seeding-dependent propagation and maturation of amyloid fibril conformation

Recent studies of amyloid fibrils have focused on the presence of multiple amyloid forms even with one protein and their propagation by seeding, leading to conformational memory. To establish the structural basis of these critical features of amyloid fibrils, we used the amyloidogenic fragment Ser20-Lys41 (K3) of beta2-microglobulin, a protein responsible for dialysis-related amyloidosis. In 20% (v/v) 2,2,2-trifluoroethanol and 10 mM HCl (pH approximately 2), K3 peptide formed two types of amyloid-like fibrils, f218 and f210, differing in the amount of beta-sheet as measured by circular dichroism spectroscopy and Fourier transform infrared spectroscopy. Atomic force microscopy showed that the fibril with a larger amount of beta-sheet (f210) is thinner and longer. Both fibrils were reproduced by seeding, showing the template-dependent propagation of a fibril's conformation. However, upon repeated self-seeding, f218 fibrils were gradually transformed into f210 fibrils, revealing the conformational maturation. The observed maturation can be explained fully by a competitive propagation of two fibrils. The maturation of amyloid fibrils might play a role during the development of amyloidosis.     

Optimum amyloid fibril formation of a peptide fragment suggests the amyloidogenic preference of beta2-microglobulin under physiological conditions

Beta(2)-microglobulin (beta(2)m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Although full-length beta(2)m readily forms amyloid fibrils in vitro by seed-dependent extension with a maximum at pH 2.5, fibril formation under physiological conditions as detected in patients has been difficult to reproduce. A 22-residue K3 peptide of beta(2)m, Ser(20)-Lys(41), obtained by digestion with Acromobacter protease I, forms amyloid fibrils without seeding. To obtain further insight into the mechanism of fibril formation, we studied the pH dependence of fibril formation of the K3 peptide and its morphology using a ThT fluorescence assay and electron microscopy, respectively. K3 peptide formed amyloid fibrils over a wide range of pH values with an optimum around pH 7 and contrasted with the pH profile of the seed-dependent extension reaction of full-length beta(2)m. This suggests that once the rigid native-fold of beta(2)m is unfolded and additional factors triggering the nucleation process are provided, full-length beta(2)m discloses an intrinsic potential to form amyloid fibrils at neutral pH. The fibril formation was strongly promoted by dimerization of K3 through Cys(25). The morphology of the fibrils varied depending on the fibril formation conditions and the presence or absence of a disulfide bond. Various fibrils had the potential to seed fibril formation of full-length beta(2)m accompanied with a characteristic lag phase, suggesting that the internal structures are similar.     

Increase in the conformational flexibility of beta 2-microglobulin upon copper binding: a possible role for copper in dialysis-related amyloidosis

A key pathological event in dialysis-related amyloidosis is the fibril formation of beta(2)-microglobulin (beta 2-m). Because beta 2-m does not form fibrils in vitro, except under acidic conditions, predisposing factors that may drive fibril formation at physiological pH have been the focus of much attention. One factor that may be implicated is Cu(2+) binding, which destabilizes the native state of beta 2-m and thus stabilizes the amyloid precursor. To address the Cu(2+)-induced destabilization of beta 2-m at the atomic level, we studied changes in the conformational dynamics of beta 2-m upon Cu(2+) binding. Titration of beta 2-m with Cu(2+) monitored by heteronuclear NMR showed that three out of four histidines (His13, His31, and His51) are involved in the binding at pH 7.0. (1)H-(15)N heteronuclear NOE suggested increased backbone dynamics for the residues Val49 to Ser55, implying that the Cu(2+) binding at His51 increased the local dynamics of beta-strand D. Hydrogen/deuterium exchange of amide protons showed increased flexibility of the core residues upon Cu(2+) binding. Taken together, it is likely that Cu(2+) binding increases the pico- to nanosecond fluctuation of the beta-strand D on which His51 exists, which is propagated to the core of the molecule, thus promoting the global and slow fluctuations. This may contribute to the overall destabilization of the molecule, increasing the equilibrium population of the amyloidogenic intermediate.     

Aggregation and conformational studies on a pentapeptide derivative

Most of the disease causing proteins such as beta amyloid, amylin, and huntingtin protein, which are natively disordered, readily form fibrils consisting of beta-sheet polymers. Though all amyloid fibrils are made up of beta-sheet polymers, not all peptides with predominant beta-sheet content in the native state develop into amyloid fibrils. We hypothesize that stable amyloid like fibril formation may require mixture of different conformational states in the peptide. We have tested this hypothesis on amyloid forming peptide namely HCl(Ile)(5)NH(CH(2)CH(2)O)(3)CH(3) (I). We show peptide I, has propensity to form self-assembled structures of beta-sheets in aqueous solutions. When incubated over a period of time in aqueous buffer, I self assembled into beta sheet like structures with diameters ranging from 30 to 60 A that bind with amyloidophilic dyes like Congo red and Thioflavin T. Interestingly peptide I developed into unstable fibrils after prolonged aging at higher concentration in contrast with the general mature fibril-forming propensity of various amyloid petides known to date.     

Mapping the core of the beta(2)-microglobulin amyloid fibril by H/D exchange

Despite numerous efforts, the lack of detailed structural information on amyloid fibrils has hindered clarification of the mechanism of their formation. Here, we describe a novel procedure for characterizing the conformational flexibility of beta(2)-microglobulin amyloid fibrils at single-residue resolution that uses H/D exchange of amide protons combined with NMR analysis. The results indicate that most residues in the middle region of the molecule, including the loop regions in the native structure, form a rigid beta-sheet core, whereas the the N- and C-termini are excluded from this core. The extensively hydrogen-bonded beta-sheet core explains the remarkable rigidity and stability of amyloid fibrils. The present method could be used to obtain residue-specific conformational information of various amyloid fibrils, even though it does not provide a high resolution three-dimensional structure.     

Nuclear magnetic resonance characterization of the refolding intermediate of beta2-microglobulin trapped by non-native prolyl peptide bond

beta(2)-Microglobulin (beta2-m), a light chain of the major histocompatibility complex type I, is also found as a major component of amyloid fibrils formed in dialysis-related amyloidosis. Denaturation of beta2-m is considered to initiate the formation of fibrils. To clarify the mechanism of fibril formation, it is important to characterize the intermediate conformational states at the atomic level. Here, we investigated the refolding of beta2-m from the acid-unfolded state by heteronuclear magnetic resonance and circular dichroism spectroscopies. At low temperature, beta2-m refolded slowly, accumulating a rate-limiting intermediate with non-native chemical shift dispersions for several residues, but with compactness and secondary structures similar to those of the native protein. beta2-m has a cis proline residue at Pro32, located on the turn connecting the betaB and betaC strands. The slow refolding phase disappeared upon mutation of Pro32 to Val, indicating that Pro32 is responsible for the accumulation of the intermediate. The distribution of the perturbed residues in the intermediate suggests that the non-native prolyl peptide bond of Pro32 affects large areas of the molecule. A cis proline residue is common to various immunoglobulin domains involved in amyloidosis, implying that a non-native prolyl peptide bond that might occur under physiological conditions is related to the amyloidogenicity of these immunoglobulin domains.     

Low concentrations of sodium dodecyl sulfate induce the extension of beta 2-microglobulin-related amyloid fibrils at a neutral pH

In beta(2)-microglobulin-related (Abeta2M) amyloidosis, partial unfolding of beta(2)-microglobulin (beta2-m) is believed to be prerequisite to its assembly into Abeta2M amyloid fibrils in vivo. Although low pH or 2,2,2-trifluoroethanol at a low concentration has been reported to induce partial unfolding of beta2-m and subsequent amyloid fibril formation in vitro, factors that induce them under near physiological conditions have not been determined. Using fluorescence spectroscopy with thioflavin T, circular dichroism spectroscopy, and electron microscopy, we here show that at low concentrations, sodium dodecyl sulfate (SDS) converts natively folded beta2-m monomers into partially folded, alpha-helix-containing conformers. Surprisingly, this results in the extension of Abeta2M amyloid fibrils at neutral pH, which could be explained basically by a first-order kinetic model. At low concentrations, SDS also stabilized the fibrils at neutral pH. These SDS effects were concentration-dependent and maximal at approximately 0.5 mM, around the critical micelle concentration of SDS (0.67 mM). As the concentration of SDS was increased above 1 mM, the alpha-helix content of beta2-m rose to approximately 10%, while the beta-sheet content decreased to approximately 20%, a change paralleled by a complete cessation of fibril extension and the destabilization of the fibrils. Detergents of other classes had no significant effect on the extension of fibrils. These findings are consistent with the hypothesis that in vivo, specific factors (e.g., phospholipids) that affect the conformation and stability of beta2-m and amyloid fibrils will have significant effects on the kinetics of Abeta2M fibril formation.     

Amyloidogenic synthetic peptides of beta2-microglobulin--a role of the disulfide bond

To search for the essential regions responsible for the beta2-microglobulin (beta2-m) amyloid fibril formation, we synthesized six peptides corresponding to six of the seven beta-sheets in the native structure of beta2-m, and examined their amyloidogenicity. Among the peptides examined, peptide (21-31) (strand B) and the mixture of peptide (21-31) and (78-86) (strand F) showed fibril formation at both pH 2.5 and 7.5. Peptide (21-31) is the N-terminal half of the previously reported proteolytic fragment of beta2-m, Ser21-Lys41 (K3), suggesting that this region may be the essential core. Interestingly, the dimer formation of peptide (21-31) by the disulfide bond substantially facilitated the fibril formation, indicating that the disulfide bond is important for the structural stability of the fibrils.     

Structure of interacting segments in the growing amyloid fibril of beta2-microglobulin probed with IR spectroscopy

Inter-segmental interaction at the growing tip of the amyloid fibril of beta2-microglobulin (beta2m) was investigated using IR microscopy. Cross-seeded fibril formation was implemented, in which the amyloid fibril of the #21-31 fragment of beta2m (fA[#21-31]) was generated on the beta2m amyloid fibril (fA[beta2m]) as a seed. Differences between the IR spectra of the cross-seeded fibril and those of the seed were attributed to the contribution from the tip, whose structure is discussed. The results indicated that 6.5 +/- 1.0 out of 11 residues of the fA[#21-31] tip on fA[beta2m] are contained in a beta-sheet at pH 2.5, which was smaller than the corresponding value (7.5 +/- 1.1 residues) of the spontaneous fA[#21-31] at pH 2.5. The tip was suggested to have a planar structure, indicating the planarity of the interacting segment. The N-terminal region of fA[#21-31] in the fibril is more exposed to the solvent than that in the tip, and vice versa for the C-terminal region. This is consistent with the different protonation levels of these regions, and the direction of peptide in the fibrils is determined from these results.     

Main-chain dominated amyloid structures demonstrated by the effect of high pressure

It has been suggested that, while the globular native forms of proteins are a side-chain-dominated compact structure evolved by pursuing a unique fold with optimal packing of amino acid residues, amyloid fibrils are a main-chain-dominated structure with an extensive hydrogen bond network. To address this issue, the effects of hydrostatic pressure on amyloid fibrils of beta2-microglobulin (beta2-m), involved in dialysis-related amyloidosis, were studied. A systematic analysis at various pressures and concentrations of guanidine hydrochloride conducted by monitoring thioflavin T fluorescence, light-scattering, and tryptophan fluorescence revealed contrasting conformational changes occurring consecutively: first, a pressure-induced reorganization of fibrils and then a pressure-induced unfolding. The changes in volume as well as the observed structural changes indicate that the beta2-m amyloid fibrils under ambient pressure are less tightly packed with a larger number of cavities, consistent with the main-chain-dominated amyloid structure. Moreover, the amyloid structure without optimal packing will enable various isoforms to form, suggesting the structural basis of multiple forms of amyloid fibrils in contrast to the unique native-fold.     

A structural core within apolipoprotein C-II amyloid fibrils identified using hydrogen exchange and proteolysis

Plasma apolipoproteins show alpha-helical structure in the lipid-bound state and limited conformational stability in the absence of lipid. This structural instability of lipid-free apolipoproteins may account for the high propensity of apolipoproteins to aggregate and accumulate in disease-related amyloid deposits. Here, we explore the properties of amyloid fibrils formed by apolipoproteins using human apolipoprotein (apo) C-II as a model system. Hydrogen-deuterium exchange and NMR spectroscopy of apoC-II fibrils revealed core regions between residues 19-37 and 57-74 with reduced amide proton exchange rates compared to monomeric apoC-II. The C-terminal core region was also identified by partial proteolysis of apoC-II amyloid fibrils using endoproteinase GluC and proteinase K. Complete tryptic hydrolysis of apoC-II fibrils followed by centrifugation yielded a single peptide in the pellet fraction identified using mass spectrometry as apoC-II(56-76). Synthetic apoC-II(56-76) readily formed fibrils, albeit with a different morphology and thioflavinT fluorescence yield compared to full-length apoC-II. Studies with smaller peptides narrowed this fibril-forming core to a region within residues 60-70. We postulate that the ability of apoC-II(60-70) to independently form amyloid fibrils drives fibril formation by apoC-II. These specific amyloid-forming regions within apolipoproteins may underlie the propensity of apolipoproteins and their peptide derivatives to accumulate in amyloid deposits in vivo.     

The role of disulfide bond in the amyloidogenic state of beta(2)-microglobulin studied by heteronuclear NMR

beta(2)-Microglobulin (beta2-m) is a major component of dialysis-related amyloid fibrils. Although recombinant beta2-m forms needle-like fibrils by in vitro extension reaction at pH 2.5, reduced beta2-m, in which the intrachain disulfide bond is reduced, cannot form typical fibrils. Instead, thinner and flexible filaments are formed, as shown by atomic force microscopy images. To clarify the role of the disulfide bond in amyloid fibril formation, we characterized the conformations of the oxidized (intact) and reduced forms of beta2-m in the acid-denatured state at pH 2.5, as well as the native state at pH 6.5, by heteronuclear NMR. [(1)H]-(15)N NOE at the regions between the two cysteine residues (Cys25-Cys80) revealed a marked difference in the pico- and nanosecond time scale dynamics between that the acid-denatured oxidized and reduced states, with the former showing reduced mobility. Intriguingly, the secondary chemical shifts, DeltaCalpha, DeltaCO, and DeltaHalpha, and (3)J(HNHalpha) coupling constants indicated that both the oxidized and reduced beta2-m at pH 2.5 have marginal alpha-helical propensity at regions close to the C-terminal cysteine, although it is a beta-sheet protein in the native state. The results suggest that the reduced mobility of the denatured state is an important factor for the amylodogenic potential of beta2-m, and that the marginal helical propensity at the C-terminal regions might play a role in modifying this potential.     

Structural studies reveal that the diverse morphology of beta(2)-microglobulin aggregates is a reflection of different molecular architectures

Amyloid deposition accompanies over 20 degenerative diseases in human, including Alzheimer's, Parkinson's, and prion diseases. Recent studies revealed the importance of other type of protein aggregates, e.g., non-specific aggregates, protofibrils, and small oligomers in the development of such diseases and proved their increased toxicity for living cells in comparison with mature amyloid fibrils. We carried out a comparative structural analysis of different monomeric and aggregated states of beta(2)-microglobulin, a protein responsible for hemodialysis-related amyloidosis. We investigated the structure of the native and acid-denatured states, as well as that of mature fibrils, immature fibrils, amorphous aggregates, and heat-induced filaments, prepared under various in vitro conditions. Infrared spectroscopy demonstrated that the beta-sheet compositions of immature fibrils, heat-induced filaments and amorphous aggregates are characteristic of antiparallel intermolecular beta-sheet structure while mature fibrils are different from all others suggesting a unique overall structure and assembly. Filamentous aggregates prepared by heat treatment are of importance in understanding the in vivo disease because of their stability under physiological conditions, where amyloid fibrils and protofibrils formed at acidic pH depolymerize. Atomic force microscopy of heat-induced filaments represented a morphology similar to that of the low pH immature fibrils. At a pH close to the pI of the protein, amorphous aggregates were formed readily with association of the molecules in native-like conformation, followed by formation of intermolecular beta-sheet structure in a longer time-scale. Extent of the core buried from the solvent in the various states was investigated by H/D exchange of the amide protons.     

Kinetically controlled thermal response of beta2-microglobulin amyloid fibrils

Calorimetric measurements were carried out using a differential scanning calorimeter in the temperature range from 10 to 120 degrees C for characterizing the thermal response of beta2-microglobulin amyloid fibrils. The thermograms of amyloid fibril solution showed a remarkably large decrease in heat capacity that was essentially released upon the thermal unfolding of the fibrils, in which the magnitude of negative heat capacity change was not explicable in terms of the current accessible surface area model of protein structural thermodynamics. The heat capacity-temperature curve of amyloid fibrils prior to the fibril unfolding exhibited an unusual dependence on the fibril concentration and the heating rate. Particularly, the heat needed to induce the thermal response was found to be linearly dependent on the heating rate, indicating that its thermal response is under a kinetic control and precluding the interpretation in terms of equilibrium thermodynamics. Furthermore, amyloid fibrils of amyloid beta peptides also exhibited a heating rate-dependent exothermic process before the fibril unfolding, indicating that the kinetically controlled thermal response may be a common phenomenon to amyloid fibrils. We suggest that the heating rate-dependent negative change in heat capacity is coupled to the association of amyloid fibrils with characteristic hydration pattern.     

Seeding-dependent propagation and maturation of beta2-microglobulin amyloid fibrils under high pressure

High hydrostatic pressure reversibly transforms the amyloid fibrils of beta2-microglobulin (beta2-m) into a more tightly packed, reorganized structure, which has provided insight into the polymorphic properties of amyloid fibrils. Here, to further investigate the molecular mechanism that controls fibril structure, seed-dependent fibril growth from an acid-unfolded monomeric form under high pressure was studied. At all pressures up to 400 MPa, the fibril growth could be approximated by a single-exponential kinetics, although pressure above 300 MPa decreased the growth rate significantly. The fibrils formed at high pressure were similar to the reorganized fibrils formed initially at ambient pressure and then pressurized, suggesting that the reorganized fibrils were formed directly at high pressure. A systematic investigation of the extension rate under various pressures indicated that the activation free energies for the original and reorganized fibrils are significantly different, suggesting that different amino acid contacts are involved in these two types of fibrils. On the other hand, for the seed-dependent extension reactions of both types of fibrils, the activation volume was much smaller than the change in reaction volume, implying that only small numbers of side-chain interactions are achieved in the transition state. Importantly, we observed a marked acceleration of fibril growth, i.e., maturation, on repeated self-seeding above 300 MPa, revealing the coexistence of another type of fibril with a similar structure but with an increased growth-rate under high pressure.     

Association of thin filaments into thick filaments revealing the structural hierarchy of amyloid fibrils

Beta2-Microglobulin (beta2-m) is a major structural component of dialysis-related amyloid fibrils. Kozhukh et al. [J. Biol. Chem. 277 (2002) 1310] prepared a series of peptide fragments of beta2-m by the protease digestion and examined their ability to form amyloid fibrils in citrate buffer at pH 2.5. Among various peptides, a 22-residue K3 peptide corresponding to Ser20-Lys41 spontaneously formed amyloid fibrils in aqueous solution. This peptide also formed amyloid protofibrils in 20% (v/v) 2,2,2-trifluoroethanol (TFE). To investigate the influence of solvent conditions on fibril formation, we studied their structures by atomic force microscopy. In aqueous solution, fibrils had a diameter of 4 or 8 nm and tended to cluster each other. On the other hand, protofibrils in 20% (v/v) TFE had a diameter of 2 nm with no tendency of clustering. Intriguingly, when the K3 protofibrils were transferred from 20% (v/v) TFE to aqueous solution, some of them associated to form thicker fibrils with a diameter of 4-15 nm and a left-handed helical twist. TFE is a hydrophobic solvent, so that hydrophobic interactions between molecules may be weakened. The results suggest that the fibrils in aqueous conditions are formed by the cooperative association of protofibrils at the growing ends of the fibrils, in which hydrophobic interactions play a major role.     

Direct observation of amyloid fibril growth monitored by thioflavin T fluorescence

Real-time monitoring of fibril growth is essential to clarify the mechanism of amyloid fibril formation. Thioflavin T (ThT) is a reagent known to become strongly fluorescent upon binding to amyloid fibrils. Here, we show that, by monitoring ThT fluorescence with total internal reflection fluorescence microscopy (TIRFM), amyloid fibrils of beta2-microgobulin (beta2-m) can be visualized without requiring covalent fluorescence labeling. One of the advantages of TIRFM would be that we selectively monitor fibrils lying along the slide glass, so that we can obtain the exact length of fibrils. This method was used to follow the kinetics of seed-dependent beta2-m fibril extension. The extension was unidirectional with various rates, suggesting the heterogeneity of the amyloid structures. Since ThT binding is common to all amyloid fibrils, the present method will have general applicability for the analysis of amyloid fibrils. We confirmed this with the octapeptide corresponding to the C terminus derived from human medin and the Alzheimer's amyloid beta-peptide.     

Flow-induced alignment of amyloid protofilaments revealed by linear dichroism

Amyloid fibrils underlying various serious amyloidoses including Alzheimer and prion diseases form characteristic deposits in which linear fibrils with an unbranched and rigid morphology associate laterally or radially, e.g. radial senile amyloid plaques of amyloid beta. To clarify the formation of these high order amyloid deposits, studying the rheology is important. A 22-residue K3 peptide fragment of beta2-microglobulin, a protein responsible for dialysis-related amyloidosis, forms long and homogeneous protofilament-like fibrils in 20% (v/v) 2,2,2-trifluoroethanol and 10 mM HCl (pH approximately 2). Here, using circular dichroism and linear dichroism, we observed the flow-induced alignment of fibrils. Analysis of far- and near-UV linear dichroism spectra suggested that both the net pi-pi* transition moment of the backbone carbonyl group and L(b) transition moment of the Tyr(26) side chain are oriented in parallel to the fibril axis, revealing the structural details of amyloid protofilaments. Moreover, the intensities of flow-induced circular dichroism or linear dichroism signals depended critically on the length and type of fibrils, suggesting that they are useful for detecting and characterizing amyloid fibrils.     

Structural differences in Abeta amyloid protofibrils and fibrils mapped by hydrogen exchange--mass spectrometry with on-line proteolytic fragmentation

We report here structural differences between Abeta(1-40) protofibrils and mature amyloid fibrils associated with Alzheimer's disease as determined using hydrogen-deuterium exchange-mass spectrometry (HX-MS) coupled with on-line proteolysis. Specifically, we have identified regions of the Abeta(1-40) peptide containing backbone amide hydrogen atoms that are protected from HX or exposed when this peptide is incorporated into protofibrils or amyloid fibrils formed in phosphate-buffered saline without stirring at 37 degrees C. Study of protofibrils was facilitated by use of the protofibril-stabilizing agent calmidazolium chloride. Our data clearly show that both the C-terminal segment 35-40 and the N-terminal segment 1-19 are highly exposed to HX in both fibrils and protofibrils. In contrast, the internal fragment 20-34 is highly protected from exchange in fibrils but much less so in protofibrils. The data suggest that the beta-sheet elements comprising the amyloid fibril are already present in protofibrils, but that they are expanded into some adjacent residues upon the formation of mature amyloid. The N-terminal approximately ten residues appear to be unstructured in both protofibrils and fibrils. The 20-30 segment of Abeta(1-40) is more ordered in fibrils than in protofibrils, suggesting that, if protofibrils are a mechanistic precursor of fibrils, the transition from protofibril to fibril involves substantial ordering of this region of the Abeta peptide.