Determination of sulphite using an immobilized enzyme with flow injection chemiluminescence detection

A ?ow injection method is reported for the determination of sulphite‐based on chemiluminescent detection. Hydro‐gen peroxide is produced from sulphite using on‐line covalently bound immobilized sulphite oxidase packed in a mini‐column, which was mixed downstream and detected via cobalt(II)‐catalysed chemiluminescent oxidation of luminol. The limit of detection (2 × standard deviation of the blank) was 1 × 10^?3 mmol/L with sample throughput 60 h^?1. The calibration data was linear over the range of 0.2–1.0 mmol/L with relative standard deviation (n = 4) in the range 0.9–2.0%. Copyright © 2004 John Wiley & Sons, Ltd.     

Capillary electrophoresis coupled with end‐column electrochemiluminescence for the determination of ephedrine in human urine,and a study of its interactions with three proteins

A tris(2,2‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺)‐based electrochemiluminescence (ECL) detection coupled with capillary electrophoresis (CE) method has been established for the sensitive determination of ephedrine for the first time. Under the optimized conditions [ECL detection at 1.15 V, 25 mmol/L phosphate buffer solution (PBS), pH 8.0, as running buffer, separation voltage 12.5 kV, 5 mmol/L Ru(bpy)₃²⁺ with 60 mmol/L PBS, pH 8.5, in the detection cell] linear correlation (r = 0.9987) between ECL intensity and ephedrine concentration was obtained in the range 6.0 × 10^–8–6.0 × 10^–6 g/mL. The detection limit was 4.5 × 10^–9 g/mL (S:N = 3). The developed method was successfully applied to the analysis of ephedrine in human urine and the investigation of its interactions with three proteins, including bovine serum albumin (BSA), cytochrome C (Cyt‐C) and myoglobin (Mb). The number of binding sites and the binding constants between ephedrine and BSA, Cyt‐C and Mb were 8.52, 12.60, 10.66 and 1.55 × 10⁴ mol/L, 6.58 × 10³ mol/L and 1.59 × 10⁴ mol/L, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Direct chemiluminescence determination of penicillin G potassium and a chemometrical optimization approach

A highly selective and simple chemiluminescence (CL) method for determination of penicillin G potassium (PGK) was developed. In the proposed method, CL was elicited from PGK upon its oxidation with H₂O₂. The light emission was enhanced in the presence of N‐cetyl‐N,N,N‐trimethylammonium bromide (CTMAB). An experimental design, central composite design (CCD), was used to realize the optimized variables, including pH, surfactant (CTMAB) and H₂O₂ concentrations. Under optimum condition, the calibration graph was linear in the range 3.3 × 10^?3–3.3 × 10^?1 mmol/L, with a detection limit of 8.8 × 10^?4 mmol/L for PGK. The precision was calculated by analysing samples containing 1.6 × 10^?1 mmol/L PGK (n = 5) and the relative standard deviation (RSD) was 1.40%. The utility of this method was demonstrated by determining PGK in pharmaceutical formulations for injection. The proposed method was validated by a reference method. Copyright © 2011 John Wiley & Sons, Ltd.     

A sensitive method for the determination of levamisole in serum by electrochemiluminescence

A novel method was developed for the determination of levamisole by electrochemiluminescence. The method was based on electrochemiluminescence signal enhancement produced by Ru(bpy)₃²⁺, which reacted with the tertiary amine group of levamisole on a platinum electrode in 12 mmol/L borate buffer (pH 9). A linear relationship between the luminous intensity and concentration of levamisole in the range 0–1 × 10^–7 mol/L was obtained and the detection limit was 1.76 × 10^–11 mol/L. The method is sensitive, selective, simple and convenient. The method has been successfully applied to the analysis of levamisole in serum. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of deferiprone in urine and serum using a terbium‐sensitized luminescence method

Optimized conditions, validation and practical applications of a new, rapid and specific fluorometric method for the determination of deferiprone (DFP) in urine and serum samples are reported. The proposed method, which is based on the formation of a luminescent complex with Tb³⁺ ion, is evaluated in terms of linearity, accuracy, precision, stability, recovery and limits of detection (LOD) and quantification (LOQ). Under optimum conditions (pH 7.5, [Tb³⁺] = 3 × 10^–4 mol/L, temperature 0 °C and excitation wavelength 295 nm), the relative intensities at 545 nm are linear, with the concentration of DFP in the range 0.072–13 mmol/L for urine and serum samples. The LOD and LOQ, respectively, are calculated to be 0.014 and 0.045 mmol/L for urine and 0.022 and 0.072 mmol/L for serum samples. The intra‐day and inter‐day values for the precision and accuracy of the proposed method are all < 5%, and the recovery of the method is in the range 97.1–103.8%. The method was applied to human urine and serum samples collected from patients receiving DFP. The results indicated that the method can be successfully applied to the determination of DFP in human urine and serum samples collected for clinical or biopharmaceutical investigations in which simple, rapid, cheap and specific determination methods facilitate and speed up the analytical procedure. Copyright © 2011 John Wiley & Sons, Ltd.     

Sensitive determination of 2‐methoxyestradiol in pharmaceutical preparations and serum samples using flow injection chemiluminescence

A rapid and sensitive flow injection chemiluminescence (FI–CL) method is described for the determination of 2‐methoxyestradiol (2ME) based on enhancement of the CL intensity from a potassium ferricyanide–calcein system in sodium hydroxide medium. The optimum conditions for the CL emission were investigated. Under optimized conditions, a linear calibration graph was obtained over the range 1.0 × 10^‐8 to 1.0 × 10^‐6 mol/L (r = 0.998) 2ME with a detection limit (3σ) of 5.4 × 10^‐9 mol/L. The relative standard deviation (RSD) for 5.0 × 10^‐7 mol/L 2ME was 1.7%. As a preliminary application, the proposed method was successfully applied to the determination of 2ME in injection solutions and serum samples. The possible CL mechanism was also proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of arecoline in areca nut based on field amplification in capillary electrophoresis coupled with electrochemiluminescence detection

A sensitive capillary electrophoresis–electrochemiluminescence (CE–ECL) assay with an ionic liquid (IL) was developed for the determination of arecoline in areca nut. The IL, 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMImBF₄), was an effective additive improved not only the separation selectivity but also the detection sensitivity of the analyte. BMImBF₄ in the separation electrolyte made the resistance of the separation buffer much lower than that of the sample solution, which resulted in an enhanced field amplified electrokinetic injection CE. ECL intensity of arecoline is about two times higher than that of the analyte with phosphate–IL buffer system. Resolution between arecoline and other unknown compounds in real samples was improved. Under the optimized conditions (ECL detection at 1.2 V, 16 kV separation voltage, 20 mmol/L phosphate with 10 mmol/L BMImBF₄ buffer at pH 7.50, 5 mmol/L Ru(bpy)₃²⁺ and 50 mmol/L phosphate buffer in the detection reservoir), a detection limit of 5 × 10^–9 mol/L for arecoline was obtained. Relative standard deviations of the ECL intensity and the migration time were 4.51% and 0.72% for arecoline. This method was successfully applied to determination of the amount of arecoline in areca nut within 450 s. Copyright © 2012 John Wiley & Sons, Ltd.     

Rapid determination of gatifloxacin in biological samples and pharmaceutical products using europium‐sensitized fluorescence spectrophotometry

A europium‐sensitized fluorescence spectrophotometry method using an anionic surfactant, sodium dodecyl benzene sulphonate (SDBS), was developed for the determination of gatifloxacin (GFLX). The GFLX–Eu³⁺–SDBS system was studied and it was found that SDBS significantly enhanced the fluorescence intensity of the GFLX–Eu³⁺ complex (about 25‐fold). The optimal experimental conditions were determined as follows: excitation and emission wavelengths of 338 and 617 nm, pH 7.5, 3.0 × 10^–6 mol/L europium(III), and 5.0 × 10^–5 mol/L SDBS. The enhanced fluorescence intensity of the system (ΔI_f) showed a good linear relationship with the concentration of GFLX over the range 1.0 × 10^–8–8.0 × 10^–7 mol/L with a correlation coefficient of 0.9990. The detection limit (S:N = 3) was determined as 1.0 × 10^–9 mol/L. This method has been successfully applied for the determination of GFLX in pharmaceuticals and human urine/serum samples. Compared with most other methods reported, the rapid and simple procedure proposed here offered higher sensitivity, wider linear range and good stability. The luminescence mechanism of the system is also discussed in detail. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of free cholesterol based on a novel flow‐injection chemiluminescence method by immobilizing enzyme

A novel flow injection chemiluminescence method is proposed for determination of cholesterol in this paper. The cholesterol oxidase was immobilized onto sol–gel and prepared as an enzymatic reaction column. The determination of cholesterol was performed by quantitative determination of hydrogen peroxide produced from an enzymatic reaction. The luminol–H₂O₂–metal chelate diperiodatocuprate(III) system ensured that the method was highly sensitive and selective. Free cholesterol was determined over the range 5.0 × 10^–8 mol/L–5.0 × 10^–7 mol/L, with a limit of detection (3σ) of 1.9 × 10^–8 mol/L. The relative standard deviation (RSD) for 2.5 × 10^–7 mol/L was 2.7% (n = 7). The proposed method offered the advantages of sensitivity, selectivity, simplicity and rapidity for free cholesterol determination, and was successfully applied to the direct determination of free cholesterol in serum. Copyright © 2008 John Wiley & Sons, Ltd.     

Determination of 5‐hydroxytryptamine in serum by electrochemiluminescence detection with the aid of capillary electrophoresis

A rapid, sensitive and simple electrochemiluminescence method for the determination of 5‐hydroxytryptamine (5‐HT) using capillary electrophoresis was proposed. The experimental parameters, including the detection potential, the concentration of Ru(bpy)₃²⁺, the concentration and pH of phosphate buffer for separation and detection, the injection voltage and time and the separation voltage on the determination of 5‐HT, were optimized. Under the optimized conditions, the linear concentration range for 5‐HT was 3.5 × 10^‐9–5.1 × 10^‐3 mol/L, with a detection limit of 5 × 10^‐10 mol/L. The relative standard deviations (RSDs) of the ECL intensity and the migration times for six continuous injections of 1.0 µmol/L 5‐HT were 2.48% and 1.3%, respectively. The method was successfully applied to 5‐HT assay in samples of human serum in 5 min and the extraction recoveries with spiked serum samples were over 94.4%. Copyright © 2011 John Wiley & Sons, Ltd.     

Synchronous fluorescence determination of ferulic acid with Ce(IV) and sodium tripolyphosphate

In this study, a synchronous fluorescence detection method for ferulic acid (FA) is proposed based on a redox reaction between FA and Ce(IV) sulfate in dilute sulfuric acid medium at room temperature. It was found that FA could reduce Ce(IV) to Ce(III) in acidic medium, and sodium tripolyphosphate could further enhance the intrinsic fluorescence of the Ce(III) produced. The enhanced extent of synchronous fluorescence intensity was in proportion to the concentration of FA over the range 3.0 × 10^‐8 to 1.0 × 10^‐5 mol/L. The corresponding limit of determination (S/N = 3) was 1.3 × 10^‐8 mol/L. The proposed method was applied to the determination of sodium ferulate for injection sample with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel chemiluminescence system for the determination of daidzein and its hydroxyl radical-scavenging capacity

A novel chemiluminescence (CL) system was established for the determinations of daidzein in pharmaceutical preparations and to assess its ability to scavenge hydroxyl radicals. It was shown that a strong CL signal generated when eosin Y was mixed with Fenton reagent was decreased significantly when daidzein was added to the reaction system due to partial scavenging of the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometric relationship with the daidzein concentration. Based on this, we developed a new method for the determination of daidzein, using a flow‐injection chemiluminescence (FI–CL) technique. Under the optimal conditions, the linear range of daidzein concentration was 8.0 × 10^–8–3.0 × 10^–6 mol/L (R = 0.9982), with a detection limit of 9.0 × 10^–9 mol/L (S:N = 3), and the RSD was 5.8% for 1.0 × 10^–6 mol/L daidzein (n = 11). This method was successfully used in the determination of daidzein in tablets and for evaluation of the hydroxyl radical‐scavenging capacity of daidzein. The possible reaction mechanism of the CL system is discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Chemiluminescence of a cyclometallated iridium(III) complex and its application in the detection of cysteine

Chemiluminescence (CL) of a cyclometallated iridium (III) complex {tris[1‐(2,6‐dimethylphenoxy)‐4‐(4‐chlorophenyl)phthalazine]iridium(III)} in the presence of potassium permanganate and oxalic acid is reported for the first time. Cysteine exhibits sufficient enhancing effect on the CL generated from the cyclometallated iridium(III) complex, which make it possible for the sensitive detection of cysteine using a flow‐injection–chemiluminescence (FI–CL) method. The optimum conditions for the chemiluminescence emission were investigated. Under the optimal condition, the linear range for the determination of cysteine was 1.0 × 10^–9–5.0 × 10^–6 mol/L with a detection limit of 6.9 × 10^–10 mol/L. A relative standard deviation of 1.6% was obtained for eight replicate determinations. The mechanisms of CL are proposed and the emitting species was identified as the metal‐to‐ligand charge‐transfer (MLCT) excited states of the iridium complex. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence determination of ofloxacin using the Ru(bpy)2(CIP)2+−Ce(IV) system and its application

This paper reports a flow‐injection chemiluminescence method for the determination of ofloxacin (OFLX) using the Ru(bpy)₂(CIP)²⁺–Ce(IV) system. Under the optimum conditions, the relative CL intensity was proportional to the concentration of OFLX in the range 3.0 × 10^–8–1.0 × 10^–5 mol/L and the detection limit was 4.2 × 10^–9 mol/L. The proposed method has been successfully applied to the determination of ofloxacin in pharmaceuticals and human urine. The chemiluminescence mechanism of the system is also discussed. Copyright © 2008 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence method for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride

A sensitive and simple flow‐injection chemiluminescence (FI‐CL) method, which was based on the CL intensity generated from the redoxreaction of potassium permanganate (KMnO₄)–formaldehyde in vitriol (H₂SO₄) medium, has been developed, validated and applied for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride. Besides oxidants and sensitizers, the effect of the concentration of H₂SO₄, KMnO₄ and formaldehyde was investigated. Under the optimum conditions, the linear range was 1.0 × 10^?2–7.0 mg/L for naphazoline hydrochloride and 5.0 × 10^?2–10.0 mg/L for oxymetazoline hydrochloride. During seven repeated inter‐day and intra‐day precision tests of 0.1, 1.0 and 10.0 mg/L samples, the relative standard deviations all corresponded to reference values. The detection limit was 8.69 × 10^?3 mg/L for naphazoline hydrochloride and 3.47 × 10^?2 mg/L for oxymetazoline hydrochloride (signal‐to‐noise ratio ≤3). This method has been successfully implemented for the determination of naphazoline hydrochloride and oxymetazoline hydrochloride in pharmaceuticals. Copyright © 2009 John Wiley & Sons, Ltd.     

Flow‐injection chemiluminescence determination of diazepam by oxidation with N‐bromosuccinimide

A rapid and sensitive flow‐injection chemiluminescence (FI–CL) method is described for the determination of diazepam based on its reaction with N‐bromosuccinimide (NBS) in alkaline medium in the presence of dichlorofluorescein (DCF) as an effective energy‐transfer agent. Under optimum conditions, the proposed method allowed the measurement of diazepam over the range of 2.0 × 10^?6 to 2.0 × 10^?4 mol/L with a detection limit of 5.0 × 10^?7 mol/L. The relative standard deviation for 11 parallel measurements of 2.0 × 10^?5 mol/L diazepam was 2.1%. The method was applied satisfactorily for the determination of diazepam in pharmaceutical preparations, and the results agree well with those obtained by spectrophotometry. The use of the proposed system for the determination of diazepam in urine and plasma samples was also tested. The possible mechanism of the chemiluminescence reaction is discussed briefly. Copyright © 2012 John Wiley & Sons, Ltd.     

Determination of subnanomolar concentrations of vanadium in environmental water samples using flow injection with luminol chemiluminescence detection

A flow injection chemiluminescence method is described for the determination of subnanomolar concentrations of vanadium in environmental water samples. The procedure is based on the oxidation of luminol in the presence of dissolved oxygen catalyzed by vanadium(IV). Vanadium(V) reduction and preconcentration of vanadium(IV) was carried out using in‐line silver reductor and 8‐hydroxyquinoline chelating columns at pH 3.15, respectively. The calibration graph for vanadium(IV) was linear in the concentration range of 0.025–10 µg/L with relative standard deviation in the range of 0.4–5.58%. The detection limit (3s blank) was 3.8 × 10^?3 µg/L without preconcentration; when the vanadium(IV) was preconcentrated with an 8‐HQ column for 1 min (2.0 mL of sample loaded), the detection limit of 5.1 × 10^?4 µg/L was achieved. One analytical cycle can be completed in 2.0 min. The analysis of certified reference materials (CASS‐4, NASS‐5 and SLRS‐4) by the proposed method showed good agreement with the certified values. The method was successfully applied to the determination of total dissolved vanadium in environmental water samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Chemiluminescent assays for choline and phospholipase-D using a flow injection system

A flow injection chemiluminescent method is described for the determination of choline. The method is based on the production of hydrogen peroxide from choline using on-line covalently bound immobilized choline oxidase column. The product is mixed downstream and detected via the cobalt catalyzed chemiluminescent oxidation of luminol. The detection limit is 1×10⁻⁷ mol/L, with rsd 1.8 to 2.8% in the range 2–10×10⁻⁵ mol/L. The sample throughput is 30 per hour. The method was applied to the determination of choline produced off-line from phosphatidylcholine using phospholipase-D isolated from cabbage. © 1997 John Wiley & Sons, Ltd.     

Highly sensitive spectrofluorimetic determination of rutin based on its activated effect on a multi‐enzyme redox system

A highly sensitive and simple spectrofluorimetric method for the determination of rutin, based on its activated effect on a haemoglobin‐catalysed reaction, was developed. Under optimum conditions, the concentration of rutin was linear, with decreased fluorescence (ΔF) of the system under optimal experimental conditions. The calibration graph was linear in the range 1.0 × 10^–7–3.0 × 10^–5 mol/L, with a detection limit of 7.0 × 10^–8 mol/L. The relative standard deviation (RSD) was 3.26% for 11 determinations of 1.0 × 10^–5 mol/L. This method was used for the determination of rutin in pharmaceuticals with satisfactory results. Copyright © 2011 John Wiley & Sons, Ltd.     

Scavenging of hydroxyl radical by catecholamines

The direct effects of the four catecholamines (CATs), adrenaline (A), noradrenaline (NA), dopamine (D) and isoproterenol (I), on free radicals were investigated using the free radical 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH^?) and hydroxyl radial (HO^?). The CATs examined were found to inhibit the ESR signal intensity of DPPH^? in a dose‐dependent manner over the range 0.1–2.5 mmol/L in the following order: NA > A > I > D, with IC₅₀ = 0.30 ± 0.03 for noradrenaline and IC₅₀ = 0.86 ± 0.02 for dopamine. Hydroxyl radicals were produced using a Fenton reaction in the presence of the spin trap 5,5‐dimethyl‐1‐pyrroline N‐oxide (DMPO), and ESR technique was applied to detect the CATs reactivity toward the radicals. The reaction rates constant (k_r) of CATs with HO^? were found to be in the order of 10⁹ L/mol/s, and the k_r value for noradrenaline was the highest (k_r = 8.4 × 10⁹ L/mol/s). The CATs examined exhibited also a strong decrease in the light emission (62–73% at 1 mmol/L concentration and 79–89% at 2 mmol/L concentration) from a Fenton‐like reaction. These reactions may be relevant to the biological action of these important polyphenolic compounds. Copyright © 2012 John Wiley & Sons, Ltd.