Synthesis,characterization and luminescent properties of europium complexes with 2,4,6‐tris‐(2‐pyridyl)‐s‐triazine as highly efficient sensitizers

Using 2,4,6‐tris‐(2‐pyridyl)‐s‐triazine (TPTZ) as a neutral ligand, and p‐hydroxybenzoic acid, terephthalic acid and nitrate as anion ligands, five novel europium complexes have been synthesized. These complexes were characterized using elemental analysis, rare earth coordination titrations, UV/vis absorption spectroscopy and infrared spectroscopy. Luminescence spectra, luminescence lifetime and quantum efficiency were investigated and the mechanism discussed in depth. The results show that the complexes have excellent emission intensities, long emission lifetimes and high quantum efficiencies. The superior luminescent properties of the complexes may be because the triplet energy level of the ligands matches well with the lowest excitation state energy level of Eu³⁺. Moreover, changing the ratio of the ligands and metal ions leads to different luminescent properties. Among the complexes, Eu₂(TPTZ)₂(C₈H₄O₄)(NO₃)₄(C₂H₅OH)·H₂O shows the strongest luminescence intensity, longest emission lifetime and highest quantum efficiency. Copyright © 2015 John Wiley & Sons, Ltd.     

A new quaternary photoluminescence enhancement system of Eu−N‐(o‐vanillin)‐1,8‐diaminonaphthalene−1,10‐phenanthroline−Zn and its application in determining trace amounts of europium and zinc

A new sensitive quaternary photoluminescence enhancement system has been successfully developed to determine trace amounts of Eu³⁺ and Zn²⁺. The photoluminescence intensity of Eu ? N‐(o‐vanilin)‐1,8‐diaminonaphthalene systems was greatly increased by the addition of specific concentrations of 1, 10‐phenanthroline and Zn²⁺. The excitation and emission wavelengths were 274 and 617 nm, respectively. Under optimal system conditions, the photoluminescence intensity showed a linear response toward Eu³⁺ in the range of 5.0 × 10^–6 ~ 2.0 × 10^–5 M with a limit of detection (= 2.2 × 10^–9 M) and the photoluminescence intensity of the system decreased linearly by increasing the Zn²⁺ concentration in the range of 5.0 × 10^–8 ~ 1.0 × 10^–6 M with a limit of detection (= 8.8 × 10^–11 M). This system was successfully applied for the determination of trace amounts of Eu³⁺ in a high purity La₂O₃ matrix and in the synthetic rare earth oxide mixture, and of Zn²⁺ in a high purity Mg(NO₃)₂ · 6H₂O matrix and in synthetic coexisting ionic matrixes. The energy transfer mechanism, photoluminescence enhancement of the system and interference of other lanthanide ions and common coexisting ions were also studied in detail. Copyright © 2013 John Wiley & Sons, Ltd.     

A new Pr3+‐activated molybdate‐based phosphor for application to white LEDs with blue excitation

The novel red‐emitting phosphors K_xSr_1?2xMoO₄:Pr³⁺_x (0.00 ≤ x ≤ 0.04) were prepared by solid‐state reaction. The crystallization and particle sizes of samples were investigated by powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). TEM images were in good agreement with the theoretical calculation data from the XRD patterns. Photoluminescence analysis indicated that there were three excitation peaks under 430–500 nm, and all samples showed the intensely red emission at 648 nm corresponding to the ³P₀ → ³F₂ transition of Pr³⁺. The concentrations of doping ions, temperature and polyethylene glycol in the phosphor system can significantly influence the intensity of the red emission. The photoluminescence spectral intensity reached its maximum at x = 0.02. The results showed that the investigated phosphor is a potential red phosphor for white light‐emitting diodes. Copyright © 2010 John Wiley & Sons, Ltd.     

Formation mechanism of cross‐linking Maillard compounds in peptide–xylose systems

The formation mechanism of Maillard peptides was explored in Maillard reaction through diglycine/glutathione(GSH)/(Cys‐Glu‐Lys‐His‐Ile‐Met)–xlyose systems by heating at 120 °C for 30–120 min. Maximum fluorescence intensity of Maillard reaction products (MRPs) with an emission wavelength of 420~430 nm in all systems was observed, and the intensity values were proportional to the heating time. Taken diglycine/GSH–[¹³C₅]xylose systems as a control, it was proposed that the compounds with high m/z values of 379 and 616 have the high molecular weight (HMW) products formed by cross‐linking of peptides and sugar. In (Cys‐Glu‐Lys‐His‐Ile‐Met)–xylose system, the m/z value of HMW MRPs was not observed, which might be due to the weak signals of these products. According to the results of gel permeation chromatography, HMW MRPs were formed by Maillard reaction, especially in (Cys‐Glu‐Lys‐His‐Ile‐Met)–xylose system, the percentage of Maillard peptides reached 52.90%. It was concluded that Maillard peptides can be prepared through the cross‐linking of sugar and small peptides with a certain MW range. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Eu3+‐tetrakis β‐diketonate complexes for solid‐state lighting application

Eu³⁺–β‐diketonate complexes are used, for example, in solid‐state lighting (SSL) or light‐converting molecular devices. However, their low emission quantum efficiency due to water molecules coordinated to Eu³⁺ and low photostability are still problems to be addressed. To overcome such challenges, we synthesized Eu³⁺ tetrakis complexes based on [Q][Eu(tfaa)₄] and [Q][Eu(dbm)₄] (Q1 = C₂₆H₅₆N⁺, Q2 = C₁₉H₄₂N⁺, and Q3 = C₁₇H₃₈N⁺), replacing the water molecules in the tris stoichiometry. The tetrakis β‐diketonates showed desirable thermal stability for SSL and, under excitation at 390 nm, they displayed the characteristic Eu³⁺ emission in the red spectral region. The quantum efficiencies of the dbm complexes achieved values as high as 51%, while the tfaa complexes exhibited lower quantum efficiencies (28–33%), but which were superior to those reported for the tris complexes. The structures were evaluated using the Sparkle/PM7 model and comparing the theoretical and the experimental Judd–Ofelt parameters. [Q1][Eu(dbm)₄] was used to coat a near‐UV light‐emitting diode (LED), producing a red‐emitting LED prototype that featured the characteristic emission spectrum of [Q1][Eu(dbm)₄]. The emission intensity of this prototype decreased only 7% after 30 h, confirming its high photostability, which is a notable result considering Eu³⁺ complexes, making it a potential candidate for SSL.     

Thermoluminescence and photoluminescence studies on γ‐ray‐irradiated Ce3+,Tb3+‐doped potassium chloride single crystals

Single crystals of KCl doped with Ce³⁺,Tb³⁺ were grown using the Bridgeman–Stockbarger technique. Thermoluminescence (TL), optical absorption, photoluminescence (PL), photo‐stimulated luminescence (PSL), and thermal‐stimulated luminescence (TSL) properties were studied after γ‐ray irradiation at room temperature. The glow curve of the γ‐ray‐irradiated crystal exhibits three peaks at 420, 470 and 525 K. F‐Light bleaching (560 nm) leads to a drastic change in the TL glow curve. The optical absorption measurements indicate that F‐ and V‐centres are formed in the crystal during γ‐ray irradiation. It was attempted to incorporate a broad band of cerium activator into the narrow band of terbium in the KCl host without a reduction in the emission intensity. Cerium co‐doped KCl:Tb crystals showed broad band emission due to the d–f transition of cerium and a reduction in the intensity of the emission peak due to ⁵D₃–⁷F_j (j = 3, 4) transition of terbium, when excited at 330 nm. These results support that energy transfer occurs from cerium to terbium in the KCl host. Co‐doping Ce³⁺ ions greatly intensified the excitation peak at 339 nm for the emission at 400 nm of Tb³⁺. The emission due to Tb³⁺ ions was confirmed by PSL and TSL spectra. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence study and dosimetry approach of Ce on an α‐Sr2P2O7 phosphor synthesized by a high‐temperature combustion method

We report synthesis of a cerium‐activated strontium pyrophosphate (Sr₂P₂O₇) phosphor using a high‐temperature combustion method. Samples were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), photoluminescence (PL) and thermoluminescence (TL). The XRD pattern reveals that Sr₂P₂O₇ has an α‐phase with crystallization in the orthorhombic space group of Pnam. The IR spectrum of α‐Sr₂P₂O₇ displays characteristic bands at 746 and 1190 cm^‐1 corresponding to the absorption of (P₂O₇)^‐4. PL emission spectra exhibit a broad emission band around 376 nm in the near‐UV region due to the allowed 5d–4f transition of cerium and suggest its applications in a UV light‐emitting diode (LED) source. PL also reveals that the emission originates from 5d–4f transition of Ce³⁺ and intensity increases with doping concentration. TL measurements made after X‐ray irradiation, manifest a single intense glow peak at around 192°C, which suggests that this is an outstanding candidate for dosimetry applications. The kinetic parameters, activation energy and frequency factor of the glow curve were calculated using different analysis methods. Copyright © 2014 John Wiley & Sons, Ltd.     

FERONIA mutation induces high levels of chloroplast‐localized Arabidopsides which are involved in root growth

The FERONIA (FER) signaling pathway is known to have diverse roles in Arabidopsis thaliana, such as growth, reproduction, and defense, but how this receptor kinase is involved in various biological processes is not well established. In this work, we applied multiple mass spectrometry techniques to identify metabolites involved in the FER signaling pathway and to understand their biological roles. A direct infusion Fourier transform ion cyclotron resonance (FT‐ICR)‐MS approach was used for initial screening of wild‐type and feronia (fer) mutant plant extracts, and Arabidopsides were found to be significantly enriched in the mutant. As Arabidopsides are known to be induced by wounding, further experiments on wounded and non‐wounded leaf samples were carried out to investigate these oxylipins as well as related phytohormones using a quadrupole‐time‐of‐flight (Q‐TOF) MS by direct injection and LC‐MS/MS. In a root growth bioassay with Arabidopside A isolated from fer mutants, the wild‐type showed significant root growth inhibition compared with the fer mutant. Our results therefore implicated Arabidopsides, and Arabidopside A specifically, in FER functions and/or signaling. Finally, matrix‐assisted laser desorption/ionization MS imaging (MALDI‐MSI) was used to visualize the localization of Arabidopsides, and we confirmed that Arabidopsides are highly abundant at wounding sites in both wild‐type and fer mutant leaves. More significantly, five micron high‐spatial resolution MALDI‐MSI revealed that Arabidopsides are localized to the chloroplasts where many stress signaling molecules are made.     

Luminescence of the near‐ultraviolet blue‐emitting Ba9Al2Si6O24:Ce3+ phosphor

A near‐ultraviolet (NUV) blue‐emitting phosphor Ba₉Al₂Si₆O₂₄:Ce³⁺ (BAS:Ce³⁺) was synthesized using a high‐temperature solid‐state reaction. BAS:Ce³⁺ had an excitation band peak at about 328 nm and showed a blue emission band. The NUV‐blue emission band had a peak at about 386 nm with a band width of about 60 nm, attributed to the 5d–4f transition of Ce³⁺. Fluorescent decay showed an exponential model with a lifetime of 27.2 nsec. At 150°C, the luminescence intensity decreased to 68.7% compared with the intensity at room temperature.     

High temperatures change the perspective: Integrating hormonal responses in citrus plants under co‐occurring abiotic stress conditions

Plants growing in the field are subjected to multiple stress factors acting simultaneously. Abnormally high temperatures are expected to affect wild plants and crops in the next years due to global warming. In this work, we have studied physiological, hormonal and molecular responses of the citrus rootstock, Carrizo citrange (Poncirus trifoliata L. Raf. × Citrus sinensis L. Osb.) subjected to wounding or high salinity occurring individually or in combination with heat stress. According to our results, combination of high salinity and heat stress aggravated the negative effects of salt intoxication in Carrizo. The high transpiration rate caused by high temperatures counteracted physiological responses of plants to salt stress and increased Cl^? intake in leaves. In addition, 12‐oxo‐phytodienoic acid accumulated specifically under combination of wounding and heat stress, whereas at low temperatures, wounded plants accumulated jasmonic acid (JA) and JA‐isoleucine (JA‐Ile). Moreover, an antagonism between salicylic acid (SA) and JA was observed, and wounded plants subjected to high temperatures did not accumulate JA nor JA‐Ile whereas SA levels increased (via isochorismate synthase biosynthetic pathway). Wounded plants did not accumulate abscisic acid (ABA) but its catabolite phaseic acid. This could act as a signal for the upregulation of (ABA)‐RESPONSIVE ELEMENT (ABRE)‐BINDING TRANSCRIPTION FACTOR 2 (CsAREB2) and RESPONSIVE TO DISSECATION 22 (CsRD22) in an ABA‐independent way. This work uncovers some mechanisms that explain Carrizo citrange tolerance to high temperatures together with different hormonal signals in response to specific stresses. It is suggested that co‐occurring abiotic stress conditions can modify (either enhance or reduce) the hormonal response to modulate specific responses.     

In Vitro and In Vivo Evaluation of N‐{2‐[4‐(3‐Cyanopyridin‐2‐yl)piperazin‐1‐yl]ethyl}‐3‐[11C]methoxybenz­amide,a Positron Emission Tomography (PET) Radioligand for Dopamine D4 Receptors,in Rodents

The D₄ dopamine receptor belongs to the D₂‐like family of dopamine receptors, and its exact regional distribution in the central nervous system is still a matter of considerable debate. The availability of a selective radioligand for the D₄ receptor with suitable properties for positron emission tomography (PET) would help resolve issues of D₄ receptor localization in the brain, and the presumed diurnal change of expressed protein in the eye and pineal gland. We report here on in vitro and in vivo characteristics of the high‐affinity D₄ receptor‐selective ligand N‐{2‐[4‐(3‐cyanopyridin‐2‐yl)piperazin‐1‐yl]ethyl}‐3‐[¹¹C]methoxybenzamide ([¹¹C] 2 ) in rat. The results provide new insights on the in vitro properties that a brain PET dopamine D₄ radioligand should possess in order to have improved in vivo utility in rodents.     

Radiolabeling and in vitro /in vivo evaluation of N‐(1‐adamantyl)‐8‐methoxy‐4‐oxo‐1‐phenyl‐1,4‐dihydroquinoline‐3‐carboxamide as a PET probe for imaging cannabinoid type 2 receptor

The cannabinoid type 2 (CB₂) receptor plays an important role in neuroinflammatory and neurodegenerative diseases such as multiple sclerosis, amyotrophic lateral sclerosis, and Alzheimer's disease and is therefore a very promising target for therapeutic approaches as well as for imaging. Based on the literature, we identified one 4‐oxoquinoline derivative (designated KD2) as the lead structure. It was synthesized, radiolabeled and evaluated as a potential imaging tracer for CB₂. [¹¹C]KD2 was obtained in 99% radiochemical purity. Moderate blood–brain barrier (BBB) passage was predicted for KD2 from an in vitro transport assay with P‐glycoprotein‐transfected Madin Darby canine kidney cells. No efflux of KD2 by P‐glycoprotein was detected. In vitro autoradiography of rat and mouse spleen slices demonstrated that [¹¹C]KD2 exhibits high specific binding towards CB₂. High spleen uptake of [¹¹C]KD2 was observed in dynamic positron emission tomography (PET) studies with Wistar rats and its specificity was confirmed by displacement study with a selective CB₂ agonist, GW405833. A pilot autoradiography study with post‐mortem spinal cord slices from amyotrophic lateral sclerosis (ALS) patients with [¹¹C]KD2 suggested the presence of CB₂ receptors under disease conditions. Specificity of [¹¹C]KD2 binding could also be demonstrated on these human tissues. In conclusion, [¹¹C]KD2 shows good in vitro and in vivo properties as a potential PET tracer for CB₂.

     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Synthesis of a novel fluorescent probe based on 7‐nitrobenzo‐2‐oxa‐1,3‐diazole skeleton for the rapid determination of vitamin B12 in pharmaceuticals

A new fluorescent probe, 4‐N,N‐di(2‐hydroxyethyl)imino‐7‐nitrobenzo‐2‐oxa‐1,3‐diazole (HINBD) was synthesized in a single step with reasonably good yield. The water‐soluble HINBD emits strongly in the visible region (λ_ex = 479 nm, λ_em = 545 nm) and is stable over a wide range of pH values. It was found that vitamin B₁₂ (VB₁₂) had the ability to quench the fluorescence of HINBD, and the quenched fluorescence intensity was proportional to the concentration of VB₁₂. A method for VB₁₂ determination based on the quenching fluorescence of HINBD was thus established. Interference effects of various substances, including sugars, vitamins, amino acids, inorganic cations and some organic substances have been studied. Under optimal conditions, the linear range is 0.0–2.4 × 10^–5 mol/L. The determination limit is 8.3 × 10^–8 mol/L. The method was applied to measure VB₁₂ in pharmaceutical preparations with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

Revealing interaction between sulfobutylether‐β‐cyclodextrin and reserpine by chemiluminescence and site‐directed molecular docking

The host–guest interaction between sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD) and reserpine (RSP) is described using flow injection‐chemiluminescence (FI‐CL) and site‐directed molecular docking methods. It was found that RSP could inhibit the CL intensity produced by a luminol/SBE‐β‐CD system. The decrease in CL intensity was logarithmic over an RSP concentration range of 0.03 to 700.0 nM, giving a regression equation of ?I = 107.1lgC_RES + 186.1 with a detection limit of 10 pM (3σ). The CL assay was successfully applied in the determination of RSP in injection, saliva and urine samples with recoveries in the range 93.5–106.1%. Using the proposed CL model, the binding constant (K_CD‐R) and the stoichiometric ratio of SBE‐β‐CD/RSP were calculated to be 7.4 × 10⁶ M^‐1 and 1 : 1, respectively. Using molecular docking, it was confirmed that luminol binds to the small cavity of SBE‐β‐CD with a nonpolar interaction, while RSP targeted the larger cavity of SBE‐β‐CD and formed a 1 : 1 complex with hydrogen bonds. The proposed new CL method has the potential to become a powerful tool for revealing the host–guest interaction between CDs and drugs, as well as monitoring drugs with high sensitivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Transient formation of the oxo–iron(IV) porphyrin radical cation during the reaction of iron(III) tetrakis‐5,10,15,20‐(N‐methyl‐4‐pyridyl)porphyrin with hydrogen peroxide in aqueous solution

The reaction of iron(III) tetrakis‐5,10,15,20‐(N‐methyl‐4‐pyridyl)porphyrin (Fe(III)TMPyP) with hydrogen peroxide (H₂O₂) and the catalytic activity of the reaction intermediates on the luminescent peroxidation of luminol in aqueous solution were studied by using a double‐mixing stopped‐flow system. The observed luminescence intensities showed biphasic decay depending on the conditions. The initial flashlight decayed within <1 s followed by a sustained emission for more than 30 s. Computer deconvolution of the time‐resolved absorption spectra under the same conditions revealed that the initial flashlight appeared during the formation of the oxo–iron(IV) porphyrin, TMPyPFe(IV) = O, which is responsible for the sustained emission. The absorption spectra 0.0–0.5 s did not reproduce well by a simple combination of the two spectra of Fe(III)TMPyP and TMPyPFe(IV) = O, indicating that transient species was formed at the initial stage. Addition of uric acid (UA) caused a significant delay in the initiation of the luminol emission as well as in the formation of the TMPyPFe(IV) = O. Both of them were completely diminished in the presence of UA equimolar with H₂O₂, while mannitol had no effect at all. The delay of the light emission as well as the appearance of TMPyPFe(IV) = O was directly proportional to the [UA]₀ but other kinetic profiles were not changed significantly. Based on these observations and the kinetic analysis, we confirmed the involvement of the oxo–iron(IV) porphyrin radical cation, (TMPyP)^·+Fe(IV) = O, as an obligatory intermediate in the rate‐determining step of the overall reaction, Fe(III)TMPyP + H₂O₂ → TMPyPFe(IV) = O, with a rate constant of k = 4.3 × 10⁴/mol/L/s. The rate constants for the reaction between the (TMPyP)^·+Fe(IV) = O and luminol, and between the TMPyPFe(IV) = O and luminol were estimated to be 3.6 × 10⁶/mol/L/s and 1.31 × 10⁴/mol/L/s, respectively. Copyright © 2003 John Wiley & Sons, Ltd.     

Advanced Electrolytes for Fast‐Charging High‐Voltage Lithium‐Ion Batteries in Wide‐Temperature Range

LiNi_xMn_yCo_1?x?yO₂ (NMC) cathode materials with Ni ≥ 0.8 have attracted great interest for high energy‐density lithium‐ion batteries (LIBs) but their practical applications under high charge voltages (e.g., 4.4 V and above) still face significant challenges due to severe capacity fading by the unstable cathode/electrolyte interface. Here, an advanced electrolyte is developed that has a high oxidation potential over 4.9 V and enables NMC811‐based LIBs to achieve excellent cycling stability in 2.5–4.4 V at room temperature and 60 °C, good rate capabilities under fast charging and discharging up to 3C rate (1C = 2.8 mA cm^?2), and superior low‐temperature discharge performance down to ?30 °C with a capacity retention of 85.6% at C/5 rate. It is also demonstrated that the electrode/electrolyte interfaces, not the electrolyte conductivity and viscosity, govern the LIB performance. This work sheds light on a very promising strategy to develop new electrolytes for fast‐charging high‐energy LIBs in a wide‐temperature range.     

A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries

Over the last decade, Na‐ion batteries have been extensively studied as low‐cost alternatives to Li‐ion batteries for large‐scale grid storage applications; however, the development of high‐energy positive electrodes remains a major challenge. Materials with a polyanionic framework, such as Na superionic conductor (NASICON)‐structured cathodes with formula Na_xM₂(PO₄)₃, have attracted considerable attention because of their stable 3D crystal structure and high operating potential. Herein, a novel NASICON‐type compound, Na₄MnCr(PO₄)₃, is reported as a promising cathode material for Na‐ion batteries that deliver a high specific capacity of 130 mAh g^?1 during discharge utilizing high‐voltage Mn^2+/3+ (3.5 V), Mn^3+/4+ (4.0 V), and Cr^3+/4+ (4.35 V) transition metal redox. In addition, Na₄MnCr(PO₄)₃ exhibits a high rate capability (97 mAh g^?1 at 5 C) and excellent all‐temperature performance. In situ X‐ray diffraction and synchrotron X‐ray diffraction analyses reveal reversible structural evolution for both charge and discharge.     

Intense green‐, red‐emitting Tb3+, Tb3+/Bi3+‐doped and Sm3+, Sm3+/La3+‐doped Ca2Al2SiO7 phosphors

This paper focuses on an optical study of a Tb³⁺/Bi³⁺‐doped and Sm³⁺/La³⁺‐ doped Ca₂Al₂SiO₇ phosphor synthesized using combustion methods. Here, Ca₂Al₂SiO₇:Sm³⁺ showed a red emission band under visible light excitation but, when it co‐doped with La³⁺ ions, the emission intensity was further enhanced. Ca₂Al₂SiO₇:Tb³⁺ shows the characteristic green emission band under near‐ultraviolet light excitation wavelengths, co‐doping with Bi³⁺ ions produced enhanced photoluminescence intensity with better colour tunable properties. The phosphor exhibited better phase purity and crystallinity, confirmed by X‐ray diffraction. Binding energies of Ca(2p), Al(2p), Si(2p), O(1s) were studied using X‐ray photoelectron spectroscopy. The reported phosphor may be a promising visible light excited red phosphor for light‐emitting diodes and energy conversion devices.