Non‐competitive immunoassay for luteinizing hormone in human serum using capillary electrophoresis with chemiluminescence detection

A non‐competitive immunoassay based on capillary electrophoresis (CE) with chemiluminescence (CL) detection has been developed for the determination of luteinizing hormone (LH) in human serum. The work involved the development of separation and CL conditions, allowing for routine analysis of serum samples. In this study, horseradish peroxidase (HRP)‐labelled monoclonal anti‐LH can catalyse the luminol–hydrogen peroxide reaction. The determined LH can react with excessive amount of HRP‐labelled anti‐LH. Within 14 min, free enzyme conjugate and immune complex could be separated in alkaline borate buffer by means of a high voltage (15 kV). To improve sensitivity, a series of measures were adopted, including the choice of para‐iodophenol as a CL enhancer, unique design in detect window. Under the optimal conditions, the calibration curve for LH was established in the concentration range 1–200 mIU/mL and the detection limit was 0.08 mIU/mL. Compared with ELISA, this method decreased the detection limit by about 12 times, and it has been successfully employed in the determination of LH in human serum. Copyright © 2007 John Wiley & Sons, Ltd.     

Employment of 4‐(1,2,4‐triazol‐1‐yl)phenol as a signal enhancer of the chemiluminescent luminol–H2O2–horseradish peroxidase reaction for detection of hepatitis C virus in real samples

Highly sensitive detection of hepatitis C virus (HCV) in serum is a key method for diagnosing and classifying the extent of HCV infection. In this study, a p‐phenol derivative, 4‐(1,2,4‐triazol‐1‐yl)phenol (4‐TRP), was employed as an efficient enhancer of the luminol–hydrogen peroxide (H₂O₂)–horseradish peroxidase (HRP) chemiluminescence (CL) system for detection of HCV. Compared with a traditional enhancer, 4‐TRP strongly enhanced CL intensity with the effect of prolonging and stabilizing light emission. The developed CL system was applied to detecting HCV core antigen (HCV‐cAg) using a sandwich structure inside microwells. Our experimental results showed that there was good linear relationship between CL intensity and HCV‐cAg concentration in the 0.6–3.6 pg/mL range (R = 0.99). The intra‐ and inter‐assay coefficients of variation were 4.5–5.8% and 5.0–7.3%, respectively. In addition, sensitive determination of HCV‐cAg in serum samples using the luminol–H₂O₂–HRP–4‐TRP CL system was also feasible in clinical settings. Copyright © 2015 John Wiley & Sons, Ltd.     

Chemiluminescent assay of enzymes using proenhancers and pro-anti-enhancers

Enhanced chemiluminescent assays for hydrolase enzymes have been developed using proehancer and pro-anti-enhancer substrates. Alkaline phosphatase is measured using disodium para-iodophenyl phosphate (proenhancer) which is converted to para-iodophenol and this in turn enhances the light emission from the horseradish peroxidase catalysed chemiluminescent oxidation of luminol by peroxide. An alternative strategy uses para-nitrophenyl phosphate which is converted by alkaline phosphatase to para-nitrophenol which inhibits the enhanced chemiluminescent reaction. The detection limit for the enzyme using the proenhancer and pro-anti-enhancer assays was 100 attomoles and 1 picornole, respectively. The proenhancer strategy was effective in assays for beta-D-galactosidase, beta-D -glucosidase and aryl sulfatase. A limited comparison of the proenhancer and a conventional colorimetric assay for an alkaline phosphatase label in an enzyme immunoassay for alpha-fetoprotein showed good agreement.     

Flow system for the automatic screening of the effect of phenolic compounds on the luminol–hydrogen peroxide–peroxidase chemiluminescence system

In this work, an automated flow‐based procedure for the screening of the effect of the different phenolic compounds on the chemiluminescence (CL) luminol–hydrogen peroxide–horseradish peroxidase (HRP) system is presented. This procedure involves the combination of multisyringe flow injection analysis (MFSIA) and sequential injection analysis (SIA) techniques and exploits the ability of the different subgroups of phenols, such as cholorophenols, nitrophenols, methylphenols and polyphenols, to enhance or inhibit the described CL system. The implementation of this reaction in the SIA–MSFIA system enabled favourable and precise conditions to evaluate the effect of phenolic compounds, as it involves an in‐line reaction between the phenolic derivative, hydrogen peroxide and peroxidase and subsequent oxidized HRP intermediates generation prior to the fast reaction with the chemiluminogenic reagent. Several studies were then performed with the aim of establishing the appropriate flow system configuration and reaction conditions. It was shown that phenol and chlorophenols produce an enhanced CL response and nitrophenols, methylphenols and polyphenols are inhibitors within the range of concentrations studied (1–100 mg/L). Based on these studies, the developed method was applied to the determination of total polyphenol and phenol content in wine/grape seeds and water samples, respectively, and the results obtained showed good agreement with those furnished by the corresponding Folin–Ciocalteu and 4‐aminoantipyrine reference methods. The developed approach is further pursued by designing an automated generic tool for performing studies of peroxidase‐catalysed CL reactions of luminol focused on the detection of compounds that will affect the rate of those reactions. Copyright © 2011 John Wiley & Sons, Ltd.     

New enhancers for the chemiluminescent peroxidase catalysed chemiluminescent oxidation of pyrogallol and purpurogallin

The effects of various boronate compounds, 4-biphenylboronic acid, 4-bromobenzeneboronic acid, trans-4-(3-propionic acid)phenylboronic acid and 4-iodophenylboronic acid, on the horseradish peroxidase (HRP) catalysed chemiluminescent oxidation of pyrogallol and purpurogallin by peroxide were investigated. trans-4-(3-Propionic acid)phenylboronic acid produced a 13.7-fold enhancement in the peak light emission from the chemiluminescent HRP catalysed pyrogallol reaction (detection limit for HRP < 1.25 fmol). At low enhancer concentration a single peak of light emission was observed and as the enhancer concentration increased the time to peak light emission became progressively longer. The chemiluminescence showed two peaks at higher concentrations (> 54.3 μmol/L) and the individual peak times depended upon the concentration of the enhancer. All of the boronates enhanced peak light emission in the chemiluminescent HRP catalysed purpurogallin reaction. 4-Biphenylboronic acid was the most effective and it enhanced peak light emission 314-fold. The practical detection limit for HRP (Type VIA) using this enhancer was 4.18 pmol (peak emission at 20 minutes). This compound also enhanced peak light emission 232-fold from a chemiluminescent HRP-purpurogallin reaction in which molecular oxygen replaced peroxide as the oxidant.     

Optimization of Peroxidase-Catalyzed Oxidation of Luminol in Reversed Micelles of Surfactants in Octane

Luminol oxidation in the Aerosol OT (AOT) reversed micelles in octane catalyzed by horseradish peroxidase (HRP), or its conjugate with Cortisol (HRP-COR), was optimized. The chemiluminescence intensity during luminol oxidation was strongly dependent on the method of preparation of the reaction mixture and the addition of Triton X-45, cyclohexanol and the chemiluminescence “enhancer”, p-iodophenol, into the micellar system. Five procedures for the preparation of the reaction mixture were compared. The maximum chemiluminescence was observed in the micellar system containing all the reaction components excluding a biocatalyst, addition of which into the system started the reaction. Triton X-45, cyclohexanol or p-iodophenol added to the micellar system enhanced significantly the chemiluminescence intensity. The “enhancing” action of p-iodophenol in AOT reversed micelles was 10-fold less than in an aqueous medium.     

Influence of Igepal reverse micellar and micellar systems on activity and stability of heme peroxidases

The activities of horseradish peroxidase (HRP) and lactoperoxidase (LPO) entrapped in reverse micelles of Igepal CO-520 in cyclohexane were studied. When the molar ratio of water to surfactant, w₀ was ≥13, the activity of HRP encapsulated in the water pool of the reverse micelle was comparable with that measured in buffer. For LPO, however, lower activity was observed after its incorporation into the same system.

The activity of the investigated peroxidases was also measured in an aqueous solution of Igepal CO-720 or after incubation with this surfactant. The enzymes became inactivated in an aqueous micellar solution of Igepal CO-720, although this process was reversible.

The stability of HRP and LPO at 37 or 50°C was lower in the micellar systems than in buffer with the exception for HRP in reverse micelles at 50°C.     

Biomimetic oxidation of ibuprofen with hydrogen peroxide catalysed by horseradish peroxidase (HRP) and 5,10,15,20-tetrakis-(2',6'-dichloro-3'-sulphonatophenyl)porphyrinatoiro n(III) and manganese(III) hydrates in AOT reverse micelles

The oxidation of ibuprofen with H2O2 catalysed by Horseradish peroxidase (HRP), Cl8TPPS4Fe(III)(OH2)2 and Cl8TPPS4Mn(III)(OH2)2 in AOT reverse micelles gives 2-(4'-isobutyl-phenyl)ethanol (5) and p-isobutyl acetophenone (6) in moderate yields. The reaction of ibuprofen (2) with H2O2 catalysed by HRP form carbon radicals by the oxidative decarboxylation, which on reaction with molecular oxygen to form hydroperoxy intermediate, responsible for the formation of the products 5 and 6. The yields of different oxidation products depend on the pH, the water to surfactant ratio (Wo), concentration of Cl8TPPS4Fe(III)(OH2)2 and Cl8TPPS4Mn(III)(OH2)2 and amount of molecular oxygen present in AOT reverse micelles. The formation of 2-(4'-isobutyl phenyl)ethanol (5) may be explained by the hydrogen abstraction from ibuprofen by high valent oxo-manganese(IV) radical cation, followed by decarboxylation and subsequent recombination of either free hydroxy radical or hydroxy iron(III)/manganese(III) porphyrins. The over-oxidation of 5 with high valent oxo-manganese, Mn(IV)radical cation intermediate form 6 in AOT reverse micelles by abstraction and recombination mechanism.     

Dilution of protein‐surfactant complexes: A fluorescence study

Dilution of protein–surfactant complexes is an integrated step in microfluidic protein sizing, where the contribution of free micelles to the overall fluorescence is reduced by dilution. This process can be further improved by establishing an optimum surfactant concentration and quantifying the amount of protein based on the fluorescence intensity. To this end, we study the interaction of proteins with anionic sodium dodecyl sulfate (SDS) and cationic hexadecyl trimethyl ammonium bromide (CTAB) using a hydrophobic fluorescent dye (sypro orange). We analyze these interactions fluourometrically with bovine serum albumin, carbonic anhydrase, and beta‐galactosidase as model proteins. The fluorescent signature of protein–surfactant complexes at various dilution points shows three distinct regions, surfactant dominant, breakdown, and protein dominant region. Based on the dilution behavior of protein–surfactant complexes, we propose a fluorescence model to explain the contribution of free and bound micelles to the overall fluorescence. Our results show that protein peak is observed at 3 mM SDS as the optimum dilution concentration. Furthermore, we study the effect of protein concentration on fluorescence intensity. In a single protein model with a constant dye quantum yield, the peak height increases with protein concentration. Finally, addition of CTAB to the protein–SDS complex at mole fractions above 0.1 shifts the protein peak from 3 mM to 4 mM SDS. The knowledge of protein–surfactant interactions obtained from these studies provides significant insights for novel detection and quantification techniques in microfluidics.     

Evaluation of lophine derivatives as L‐012 (luminol analog)‐dependent chemiluminescence enhancers for measuring horseradish peroxidase and H2O2

8‐Amino‐5‐chloro‐7‐phenylpyrido[3,4‐d]pyridazine‐1,4(2H,3H)dione (L‐012) was recently synthesized as a new chemiluminescence (CL) probe; the light intensity and the sensitivity of L‐012 are higher than those of other CL probes such as luminol. Previously, our group developed four lophine‐based CL enhancers of the horseradish peroxidase (HRP)‐catalyzed CL oxidation of luminol, namely 2‐(4‐hydroxyphenyl)‐4,5‐diphenylimidazole (HDI), 2‐(4‐hydroxyphenyl)‐4,5‐di(2‐pyridyl)imidazole (HPI), 4‐(4,5‐diphenyl‐1H‐imidazol‐2‐yl)phenylboronic acid (DPA), and 4‐[4,5‐di(2‐pyridyl)‐1H‐imidazol‐2‐yl]phenylboronic acid (DPPA), and showed that DPPA was suitable for the photographic detection of HRP. In this study, we replaced luminol with L‐012 and evaluated these as L‐012‐dependent CL enhancers. In addition, to detect HRP and/or H₂O₂ with higher sensitivity, each detection condition for the L‐012–HRP–H₂O₂ enhanced CL was optimized. All the derivatives enhanced the L‐012‐dependent CL as well as luminol CL; HPI generated the highest enhanced luminescence. Under optimized conditions for HRP detection, the detection limit of HRP was 0.08 fmol. By contrast, the detection limit of HRP with the enhanced L‐012‐dependent CL using 4‐iodophenol, which is a common enhancer of luminol CL, was 1.1 fmol. With regard to H₂O₂ detection, the detection limits for enhanced CL with HPI and 4‐iodophenol were 0.29 and 1.5 pmol, respectively. Therefore, it is demonstrated that HPI is the most superior L‐012‐dependent CL enhancer. Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,characterization and sol–gel entrapment of a crown ether‐styryl fluoroionophore

The synthesis and initial evaluation of a new dye‐functionalized crown‐ether, 2‐[2‐(2,3,5,6,8,9,11,12,14,15‐decahydro‐1,4,7,10,13,16‐benzohexaoxacyclooctadecin)ethenyl]‐3‐methyl benzothiazolium iodide (denoted BSD), are reported. This molecule contains a benzyl 18‐crown‐6 moiety as the ionophore and a benzothiazolium to spectrally transduce ion binding. Binding of K⁺ to BSD in methanol causes shifts in the both absorbance and fluorescence emission maxima, as well as changes in the molar absorptivity and the emission intensity. Apparent dissociation constants (K_d) in the range 30–65 µ m were measured. In water and neutral buffer, K_d values were approximately 1 m m . BSD was entrapped in sol–gel films composed of methyltriethoxysilane (MTES) and tetraethylorthosilicate (TEOS) with retention of its spectral properties and minimal leaching. K⁺ binding to BSD in sol–gel films immersed in pH 7.4 buffer causes significant fluorescence quenching, with an apparent response time of approximately 2 min and an apparent K_d of 1.5 m m . Copyright © 2009 John Wiley & Sons, Ltd.     

Study on the reaction mechanism and the static injection chemiluminescence method for detection of acetaminophen

Acetaminophen, also called paracetamol, is found in Tylenol, Excedrin and other products as over–the‐counter medicines. In this study, acetaminophen as a luminol signal enhancer was used in the chemiluminescence (CL) substrate solution of horseradish peroxidase (HRP) for the first time. The use of acetaminophen in the luminol–HRP–H₂O₂ system affected not only the intensity of the obtained signal, but also its kinetics. It was shown that acetaminophen was to be a potent enhancer of the luminol–HRP–H₂O₂ system. A putative enhancement mechanism for the luminol–H₂O₂–HRP–acetaminophen system is presented. The resonance of the nucleophilic amide group and the benzene ring of acetaminophen structure have a great effect on O‐H bond dissociation energy of the phenol group and therefore on phenoxyl radical stabilization. These radicals act as mediators between HRP and luminol in an electron transfer reaction that generates luminol radicals and subsequently light emission, in which the intensity of CL is enhanced in the presence of acetaminophen. In addition, a simple method was developed to detect acetaminophen by static injection CL based on the enhanced CL system of luminol–H₂O₂–HRP by acetaminophen. Experimental conditions, such as pH and concentrations of substrates, have been examined and optimized. The proposed method exhibited good performance, the linear range was from 0.30 to 7.5 mM, the relative standard deviation was 1.86% (n = 10), limit of detection was 0.16 mM and recovery was 99 ± 4%. Copyright © 2013 John Wiley & Sons, Ltd.     

Fluorimetric determination of proteins using 4‐chloro‐(2′‐hydroxylophenylazo)rhodanine–Ti(IV) complex as a spectral probe

A novel method for the determination of proteins was developed, based on the enhancement of fluorescence with 4‐chloro‐(2′‐hydroxylophenylazo)rhodanine–Ti(IV) [ClHARP–Ti(IV)] complex as a fluorescence probe. The excitation and emission wavelengths of the system were 335 nm and 376 nm, respectively. The presence of bis(2‐ethylhexyl)sulphosuccinate sodium salt (AOT) microemulsion greatly increased the sensitivity of the system. Under optimal conditions, four kinds of proteins, including bovine serum albumin (BSA), human serum albumin (HSA), egg albumin (Ova), and γ‐globin (γ‐G) were studied. The detection limits were 0.182 µg/mL for BSA, 0.0788 µg/mL for HSA, 0.216 µg/mL for Ova and 0.484 µg/mL for γ‐G. The linear ranges of the calibration were 0–12.0, 0–10.0, 0–18.0 and 0–18.0 µg/mL, respectively. The method possessed high sensitivity, good selectivity and was applied to the analysis of protein in milk powder and cornmeal with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.     

Investigation on the chemiluminescence reaction of the phenylhydrazine‐luminol–peroxide system

We studied the chemiluminescence (CL) oxidation of phenyl hydrazine–luminol with various organic and inorganic peroxides. Maximum CL intensity for this system was obtained for t‐butylhydroperoxide. The enhancement in CL depended strongly on pH and was greatest at pH 12.5. The solvent drastically enhanced the CL intensity. DMSO was found to increase the CL intensity many‐fold as compared to acetonitrile and water. The effect of temperature on CL intensity has also been studied. The CL spectra revealed a broad peak at 425 nm, which suggests excited 3‐aminophthalate ion as the luminophor. A mechanism to explain the reactions is suggested. Copyright © 2012 John Wiley & Sons, Ltd.     

Fluorescence of hemoproteins in reversed micelles of surfactants in octanes

The fluorescence of myoglobin, cytochromes b5 and c in the reversed aerosol OT (AOT) micelles in octane has been investigated. The fluorescence intensity of all the three hemoproteins is higher than that in aqueous solutions. The maxima and intensities of fluorescence in the AOT micelles depend on the [H2O]/[AOT] ratio and reflect the protein structure. Aliphatic alcohols and secondary amines (piperidine and morpholine) quench the cytochrome c fluorescence in the AOT micelles, whereas dipolar aprotic solvents (dimethylsulfoxide, dimethylformamide) significantly increase the intensity of cytochrome c fluorescence in the same micelles. The transformations of the proteins solubilized by the reversed micelles of a surfactant are discussed.     

Determination of nucleic acid by [tetra‐(3‐methoxy‐4‐hydroxyphenyl)]–Tb3+ porphyrin as the fluorescence spectral probe in bis(2‐ethylhexyl)sulfosuccinate sodium salt micelle system

A new system for the determination of nucleic acid by rare earth metallic porphyrin of [tetra‐(3‐methoxy‐4‐hydroxyphenyl)]–Tb³⁺ [T(3‐MO‐4HP)–Tb³⁺] porphyrin as fluorescence spectral probe has been developed in this paper. Nucleic acid can enhance the fluorescence intensity of the T(3‐MO‐4HP)–Tb³⁺ porphyrin in the presence of bis(2‐ethylhexyl)sulfosuccinate sodium salt(AOT) micelle. In pH 8.00 Tris–HCl buffer solution, under optimum conditions, the enhanced fluorescence intensity is in proportion to the concentration of nucleic acids in the range of 0.05–3.00 µg mL^?1 for calf thymus DNA (ct DNA) and 0.03–4.80 µg mL^?1 for fish sperm DNA(fs DNA). Their detection limits are 0.03 and 0.01 µg mL^?1, respectively. In addition, the binding interaction mechanism between T(3‐MO‐4HP)–Tb³⁺ porphyrin and ct DNA is also investigated by resonance scattering and fluorescence spectra. The maximum binding number is calculated by molar ratio method. The new system can be used for the determination of nucleic acid in pig liver, yielding satisfactory results. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of Igepal reverse micellar and micellar systems on activity and stability of heme peroxidases

The activities of horseradish peroxidase (HRP) and lactoperoxidase (LPO) entrapped in reverse micelles of Igepal CO-520 in cyclohexane were studied. When the molar ratio of water to surfactant, w ₀ was ≥13, the activity of HRP encapsulated in the water pool of the reverse micelle was comparable with that measured in buffer. For LPO, however, lower activity was observed after its incorporation into the same system.

The activity of the investigated peroxidases was also measured in an aqueous solution of Igepal CO-720 or after incubation with this surfactant. The enzymes became inactivated in an aqueous micellar solution of Igepal CO-720, although this process was reversible.

The stability of HRP and LPO at 37 or 50°C was lower in the micellar systems than in buffer with the exception for HRP in reverse micelles at 50°C.     

BEHAVIOUR OF HORSERADISH PEROXIDASE IN AOT REVERSED MICELLES

The activity and stability of horseradish peroxidase (HRP) solubilised in AOT reversed micelles in isooctane and decalin was studied using guaiacol (2-methoxyphenol) as the electron donor.

The activity of the enzyme in both reversed micellar systems increases with the water content until reaching a maximum value that remains fairly constant for water contents higher than 3.05% (v/v) in isooctane and 2.20% in decalin. The effect of pH on the activity profile was studied in the system AOT/isooctane. The enzyme is fully active at pH 7 and 8 for water contents higher than 3.05% (v/v) but it was completely deactivated at pH 9. The effect of surfactant concentration on HRP activity was also investigated. At low water contents a strong dependence was observed, whilst no further activity increase was observed for water content values higher than 2.7% (v/v).

The stability of HRP was found to be strongly dependent on the water content of the system with higher levels of stability obtained for higher values of water content. HRP stability is also affected by the presence of substrates. Whilst the stability increases markedly when the enzyme is incubated with guaiacol, it does not appear to be so strongly affected by the presence of hydrogen peroxide, at the concentrations studied.     

Determination of clomipramine by flow‐injection analysis with acidic potassium permanganate–formic acid chemiluminescence detection

A sensitive and simple chemiluminescent (CL) method for the determination of clomipramine has been developed by combining the flow‐injection analysis (FIA) technique, which is based on the CL intensity generated from the redox reaction of potassium permanganate (KMnO₄)–formic acid in sulphuric acid (H₂SO₄) medium. Under the optimum conditions, the linear range for the determination of clomipramine was 0.04–4 µg/mL, with a correlation coefficient of 0.9988 (n = 10) and a detection limit of 0.008 µg/mL (3σ), and the relative standard deviation (RSD) for 2.0 µg/mL clomipramine (n = 11) is 1.26%. The proposed method has been successfully applied to the determination of the studied clomipramine in pharmaceutical preparations. The possible reaction mechanism is discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Extraction of monoclonal antibodies (IgG1) using anionic and anionic/nonionic reverse micelles

Purification schemes for antibody production based on affinity chromatography are trying to keep pace with increases in cell culture expression levels and many current research initiatives are focused on finding alternatives to chromatography for the purification of Monoclonal antibodies (MAbs). In this article, we have investigated an alternative separation technique based on liquid–liquid extraction called the reverse micellar extraction. We extracted MAb (IgG1) using reverse micelles of an anionic surfactant, sodium bis 2‐ethyl‐hexyl sulfosuccinate (AOT) and a combination of anionic (AOT) and nonionic surfactants (Brij‐30, Tween‐85, Span‐85) using isooctane as the solvent system. The extraction efficiency of IgG1 was studied by varying parameters, such as pH of the aqueous phase, cation concentration, and type and surfactant concentration. Using the AOT/Isooctane reverse micellar system, we could achieve good overall extraction of IgG1 (between 80 and 90%), but only 30% of the bioactivity of IgG1 could be recovered at the end of the extraction by using its binding to affinity chromatography columns as a surrogate measure of activity. As anionic surfactants were suspected as being one of the reasons for the reduced activity, we decided to combine a nonionic surfactant with an anionic surfactant and then study its effect on the extraction efficiency and bioactivity. The best results were obtained using an AOT/Brij‐30/Isooctane reverse micellar system, which gave an overall extraction above 90 and 59% overall activity recovery. An AOT/Tween‐85/Isooctane reverse micellar system gave an overall extraction of between 75 and 80% and overall activity recovery of around 40–45%. The results showed that the activity recovery of IgG1 can be significantly enhanced using different surfactant combination systems, and if the recovery of IgG1 can be further enhanced, the technique shows considerable promise for the downstream purification of MAbs. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010