Protoplast formation and regeneration in <Emphasis Type="Italic">Lactobacillus delbrueckii</Emphasis>

Method for production and regeneration of Lactobacillus delbrueckii protoplasts are described. The protoplasts were obtained by treatment with a mixture of lysozyme and mutanolysin in protoplast buffer at pH 6.5 with different osmotic stabilizers. The protoplasts were regenerated on deMan, Rogosa and Sharpe (MRS) with various osmotic stabilizers. Maximum protoplast formation was obtained in protoplast buffer with sucrose as an osmotic stabilizer using a combination of lysozyme (1 mg/ml) and mutanolysin (10 μg/ml). Maximum protoplast regeneration was obtained on MRS medium with sucrose (0.5 M) as an osmotic stabilizer. The regeneration medium was also applicable to other species of lactobacilli as well. This is, to our knowledge, the first report on protoplast formation and efficient regeneration in case of L. delbrueckii.     

Multinucleate nature,and mating by use of isozyme analysis inPoria cocos

Double staining study of nuclei and cell walls inPoria cocos indicated that the hyphal cells were multinucleate and had no clamp connections. Isozyme analysis of alcohol dehydrogenase (ADH) in 52 natural isolates revealed that there were three types of banding patterns: type I, five bands; type II, one slow band; type III, one fast band. Regenerants expressing type-II or type-III ADH-isozyme pattern were obtained from type-I isolates via protoplast manipulation. When the type-II regenerants were mated with the type-III regenerants, hyphae of type-I phenotype appeared. These data indicated that these type-II and type-III regenerants derived from protoplasts of the type-I isolates were primary hyphae. These primary hyphal cells were also multinucleate. Inter-strain mating ofP. cocos was performed and confirmed by ADH-isozyme analysis. Confronting cultures of a type-III regenerant derived from protoplasts of a type-I isolate and a type-II regenerant derived from a type-II isolate resulted in type-I hyphae.     

Optimization of formation and regeneration of protoplasts from biocontrol agents ofTrichoderma species

The optimal conditions necessary for a large yield and a high frequency of regeneration of protoplasts isolated from the biocontrol agentsTrichoderma koningii andT. harzianum were investigated. Protoplast yields were 1.2×10⁸/ml fromT. koningii and 6×10⁷/ml fromT. harzianum when 20-h mycelial culture was treated with a lytic enzyme solution containing Novozym 234 (15 mg/ml), sucrose (0.6 M) and citrate phosphate buffer (0.02 M), pH 5.6 at 31°C. When the protoplasts were grown in the regeneration medium containing yeast extract (1.5%), 1 I of Mandel's salts, pH 5.6, and glucose (0.8 M), a high frequency of regeneration of the protoplast was obseved: 66% forT. koningii and 45% forT. harzianum. Two patterns of regeneration were observed. First, the hyphae arose directly from the regenerated protoplast mother cell. Second, a chain of bud cells developed from the protoplast and subsequently generating hyphae generally protruded from the terminal bud cells.     

疏绵状嗜热丝孢菌原生质体的制备与再生

以疏绵状嗜热丝孢菌(Thermomyces lanuginosus)为供试菌株,研究了菌龄、酶的种类及浓度、酶解时间、酶解温度和稳渗剂对原生质体制备的影响及稳渗剂对原生质体再生的影响。结果表明,制备嗜热丝孢菌原生质体比较适宜的条件为:PDB液体培养基培养28 h,以0.7 mol/L NaCl为稳渗剂,0.15 mol/L的溶壁酶,30℃酶解4 h。原生质体再生以0.7 mol/L蔗糖作稳渗剂为最佳。     

Formation and regeneration of protoplasts of Sclerotium glucanicum

Summary Protoplast yields from Sclerotium glucanicum using Novozym 234 as the lytic enzyme were affected by the osmotic stabilizers selected, the incubation conditions used for wall degradation, and culture age. Scanning electron microscopic observations revealed that protoplast release from all hyphal regions gradually followed random wall attack, and nuclear staining showed that some protoplasts contained as many as eight nuclei. Their regeneration involved germ tube production on solid media, but formation of chains of buds and possibly cytoplasmic cleavage in liquid medium. Regenerated protoplasts gave similar exopolysaccharide yields to those of the parent culture.     

Genetic recombination by protoplast fusion inNocardia asteroides

Summary Fusion and regeneration of protoplasts ofNocardia asteroides strains ATCC 3318, IMRU W3599 and HIK B971 have been used to study genetic recombination in this species. Protoplasts were produced by treatment with lysozyme, following incubation with glycine. Mutants of ATCC 3318 were grown in peptone yeast extract medium at 32°C prior to protoplast production to maximize protoplast frequency, whereas mutants of IMRU W3599 and HIK B971 were grown in trypticase-soy broth. Glycine concentrations favoring protoplast formation varied from 1.5% to 5% depending on strain. For all strains, protoplast formation was complete 1 h after addition of 5 mg/ml lysozyme. Protoplasts were fused by addition of 50% polyethylene glycol-1000. In general, 25% of the protoplasts could be regenerated. The incidence of recombinant recovery was increased up to 750-fold. The distribution of recombinant phenotypes in matings was similar for protoplast fusion and conventional crosses.     

Colony formation and plant regeneration from mesophyll protoplasts of Solanum etuberosum

A procedure for the culture of Solanum etuberosum mesophyll protoplasts with subsequent shoot regeneration is described. Several factors affected protoplast yield, colony formation, and shoot regeneration from in vitro plants. A protoplast isolation medium with 0.6 M sucrose produced twice the yield as one with 0.3 M sucrose. uowever, a higher concentration of osmoticum was inhibitory to colony development unless it was diluted into a lower osmoticum medium in a bilayer system. A 16 hour light/8 hour dark photoperiod for stock plants allowed twice the protoplast yield compared to plants grown under continuous light but no effect was found on subsequent colony formation or shoot regeneration. The concentrations of four major salts in the protoplast plating medium were critical for a high frequency of colony formation from protoplasts. Levels of 0.25 × or 1 × were considerably better than 4 ×. Fast colony formation, but at a lower efficiency, was obtained with a monolayer plating method. A bilayer plating system allowed a higher efficiency but colonies developed more slowly. For the best treatments, the frequency of colony formation from protoplasts ranged from 2.4 to 3.6 × 10^-3 with 37% to 66% of the colonies producing shoots ten weeks after protoplast isolation.Cooperative investigation of the USDA-ARS and the Wisconsin Agric. Exp. Stn.     

Mycelial protoplast isolation and regeneration of Lentinus lepideus

Generation of fungal protoplast is essential for fusion and transformation systems. Protoplast fusion offers great potential for the improvement of industrially important microorganisms. To establish conditions for the protoplast isolation and regeneration of the mycelia of Lentinus lepideus, various enzymes and osmotic stabilizers were examined. To investigate suitable medium for the culture of L. lepideus, the mycelia were grown in ten different media at 28 degrees C for 10 days. Among them potato dextrose agar (PDA) medium was found to be the best for colony growth. When Novozym 234, cellulase and beta-glucuronidase were added to the mycelia in combination or alone, Novozym 234 alone at the concentration of 10 mg/ml was the most effective for the protoplast yield. Purified spherical protoplasts of the mycelia were osmotically hypersensitive and further incubation of the mycelia with the lytic enzyme resulted in the older parts of the hyphae swollen. When we applied various osmotic stabilizers at the fixed concentration of 0.6 M on the protoplasts, the yields of protoplasts were increased until 4-hr incubation. However application of sucrose or MgSO4 led to further protection of protoplasts after that time and reached a plateau on 5- and 7-hr incubations, respectively. The suitable incubation time and optimal pH with the lytic enzyme for the maximum release of protoplasts were 6 hrs of incubation and pH 5, respectively. When we examined various osmotic stabilizers for the regeneration of the protoplast, the complete medium containing 0.6 M sucrose induced highest hyphal growth with regeneration frequency of 3.28%.     

Optimum conditions for the release and regeneration of protoplasts of Alternaria alternata

Best release of Alternaria alternata protoplasts was obtained when 20 h old mycelia were incubated in a hydrolytic enzyme mixture of Novozym 234, Driselase, and β -glucuronidase. Numbers of nuclei/protoplast varied but generally decreased with increased time of incubation. While salts, were better osmotic stabilizers for protoplast release, sucrose and sugar alcohols were better for regeneration.     

The formation of protoplasts from Beauveria bassiana

Summary Beauveria bassiana protoplast formation from blastospores, conidia and mycelia was studied. The method of protoplast formation involves preincubation of the fungal cells with dithiothreitol and subsequent treatment with an enzyme mixture consisting of: cellulase, chitinase, -glucuronidase and lysozyme. Using this procedure protoplasts were formed from blastospores and mycelia but not conidia. Formation of protoplasts from 24 hour old mycelia was 100% efficient using the above conditions. A number of ionic and osmotic protoplast stabilizing agents were tested. Ammonium sulfate was shown to be the stabilizer of choice. Protoplasts were stable when stored at 4° C with a loss of only 17% in 6 days. We suggest that this procedure of protoplast production will allow a gentler method for the extraction and isolation of intact high molecular weight DNA from B. bassiana.     

Transfer of Isolated Nuclei into Protoplasts of Trichoderma harzianum

Protoplasts released from young hyphae of Trichoderma harzianum contained 0 to 10 nuclei per protoplast, and most (about 80%) contained from 4 to 6 nuclei. Most protoplasts were larger than 3 μm in diameter. Nuclei were isolated from protoplasts of an auxotrophic mutant of T. harzianum and transferred into protoplasts obtained from another auxotroph of the same strain. This intrastrain nuclear transfer gave rise to numerous progeny which were stable, prototrophic, and heterokaryotic. Interstrain transfers in which nuclei from a wild-type prototroph of one strain were transferred into protoplasts from a lysine-deficient auxotroph of a second strain were also done. Heterokaryotic progeny were recovered from these interstrain transfers when the regenerating protoplasts were provided with a low concentration of lysine 48 h after the initial plating. Heterokaryotic progeny contained 11 to 17% of donor-type nuclei. Progeny homokaryotic for donor-type nuclei were obtained as single-spore isolates. These homokaryotic isolates expressed the isozyme pattern and colony morphology phenotype of the nuclear donor. When regenerating protoplasts were provided with lysine 10 days after the initial plating, only a single progeny was obtained. However, single-spore subprogeny of this nuclear transfer were prototrophic and exhibited a wide range of unstable morphological phenotypes.     

Protoplats isolation and regeneration and nuclear staining of mycoparasitic Gliocladium species

Protoplast isolation and regeneration from 24 h germinating conidia of Gliocladium catenulatum, G. roseum and G. virens have been optimized. The number of nuclei per cell of four cell types of the Gliocladium spp. was determined. The optimal enzyme combination for protoplast production contained chitinase, lyticase and cellulase onuzaku in 0.5 M mannitol osmoticum. The quantity of protoplasts produced was dependent on the duration of enzymatic digestion, the concentration of germinating condidia and the species of Gliocladium being assayed. A maximum of 11 to 55% of the protoplasts of wild-type Gliocladium spp. and of two double amino acid autoxotrophic mutants of G. roseum (both Met⁻ Leu⁻) regenerated to mature, conidiating colonies depending on the regeneration medium utilized and the strain assayed. Protoplasts of G. roseum and G. catenulatum were approximately 4% multinucleate, 56% uninucleate and 40% anucleate. Protoplasts of G. virens were approximately 81% multinucleate, 6% uninucleate and 13% anucleate. Regenerating protoplasts and germinating conidia of G. catenulatum and G. roseum were predominantly uninucleate; those of G. virens were predominantly multinucleate. Conidia of all three Gliocladium spp. were predominantly uninucleate.     

Protoplasts fromPodospora anserina: Isolation,purification, and transformation

Protoplasts fromPodospora anserina mycelium were produced using the commercially available enzyme Novozym 234. Different parameters involved in protoplast isolation were analyzed in order to establish optimal conditions, and protoplast production was notably increased. For the purification of protoplasts, several techniques based on both centrifugation and filtration were assayed, with filtration yielding the best results. Regeneration of protoplasts was studied on different media and osmostic stabilizers, and about 80% regeneration was obtained. The good physiological condition of the protoplasts produced with this method is demonstrated by the lack of cell wall and high regeneration rate and transformation frequencies.     

Uptake of protoplasts from the filamentous fungiAspergillus nidulans andFusarium oxysporum into protoplasts from celery (Apium graveolens L.)

Summary Protoplasts isolated from celery cell suspension cultures, were mixed with fungal protoplasts, from either the saprophytic speciesAspergillus nidulans or the pathogenic speciesFusarium oxysporum. The incubation of protoplast mixtures with PEG caused close adhesion between plant and fungal protoplasts. Subsequent dilution of PEG resulted in the uptake of protoplasts from either fungal species into the plant protoplast cytoplasm. A range of PEG concentrations, incubation times and dilution rates were tested to maximise adhesion and uptake frequencies. Identification of uptake was achieved either by fluorescent staining of nuclei or by electron-microscopy. A maximum of 10% celery protoplasts had taken upA. nidulans protoplasts after PEG treatment. Fungal protoplasts were taken up into celery protoplast cytoplasm by endocytosis, and were maintained within vesicles; two bounding membranes were observed by electron microscopy. Plant protoplast viability was determined during prolonged incubation following fungal protoplast uptake. The presence ofA. nidulans protoplasts tended to maintain celery protoplast viability and although some morphological disintegration occurred intact celery protoplasts remained for at least 92 h after uptake. The uptake ofF. oxysporum protoplasts markedly depressed celery protoplast viability after 24 h incubation and greater celery protoplast disintegration occurred.Abbreviations PEG Polyethylene glycol - DAPI 4,6-diaminido-2-phenylindole - 2,4-D 2,4-dichlorophenoxyacetic acid     

Efficient isolation, culture and regeneration of Lotus corniculatus protoplasts

This paper reports an improved protocol for isolation, culture and regeneration of Lotus corniculatus protoplasts. A range of parameters which influence the isolation of L. corniculatus protoplasts were investigated, i.e., enzyme combination, tissue type, incubation period and osmolarity level. Of three enzyme combinations tested, the highest yield of viable protoplasts was achieved with the combination of 2% Cellulase Onozuka RS, 1% Macerozyme R-10, 0.5% Driselase and 0.2% Pectolyase. The use of etiolated cotyledon tissue as a source for protoplast isolation proved vital in obtaining substantially higher protoplast yields than previously reported. Culture of the protoplasts on a nitrocellulose membrane with a Lolium perenne feeder-layer on the sequential series of PEL medium was highly successful in the formation of micro-colonies with plating efficiencies 3–10 times greater than previous studies. Shoot regeneration and intact plants were achieved from 46% of protoplast-derived cell colonies.     

Intergeneric fusion of Zygnemataceae protoplasts

In intergeneric fusion fromMougeotia andZygnema protoplasts, the fate of fusion products, as well as nuclei and chloroplasts, could be classified according to the number of protoplasts involved from the two algae. Stable elongation growth occurred only in products of groups involving one protoplast from one alga and several protoplasts from the other alga. The features of the elongating products were those of the alga more numerously represented. The different nuclei combined by fusion failed to co-exist. In the groups involving one protoplast from one alga and several from the other, the nucleus from the former degenerated in an early period and only the nuclei from the latter were maintained. Also, the different chloroplasts combined did not co-exist. The genus of the chloroplasts maintained coincided with that of the nuclei maintained. The chloroplasts from the other genus degenerated gradually. An early morphological change in the degenerating chloroplasts was seen in the quantity of starch grains. Later, the chloroplasts generally became rounded, In degeneratingZygnema chloroplasts, thylakoid stacking was prominent. Without collapse of the thylakoid or accumulation of plastoglobules, the degenerating chlorplasts showed rupture of the chloroplast envelope.     

Karyokinesis in growing and reverting protoplasts ofSchizosaccharomyces pombe

Division of nuclei without cytokinesis proceeds in growing protoplasts ofSchizosaccharomyces pombe. Prior to regeneration of the complete cell wall and reversion the protoplasts contain 1–7 nuclei, protoplasts with 1–2 nuclei are most frequent. When regeneration of the wall is postponed by adding snail enzymes to the growth medium, protoplasts with a higher number of nuclei (2–4) occur. Multinuclear protoplasts can revert to cells. During the first cytokinesis the protoplast with the regenerated cell wall is divided into two cells by a septum, distribution of nuclei between the two cells being probably incidental. More than only a single nucleus can pass to the revertants even during the second cytokinesis. Septation of protoplasts occurs also during a partial blockage of the wall formation by the snail enzyme preparation, however, reversion to cells can never be observed here (it occurs only after transfer of protoplasts to the medium without the enzyme preparation). The growing and reverting protoplasts represent a very good model system for studying relations among individual processes of the cell cycle, primarily growth of the cell, nuclear cycle and cytokinesis. Yeast protoplasts are often utilized as models for studying morphogenic processes, relations among regeneration of the cell wall, including division of the nucleus (karyokinesis) and cytokinesis.     

红曲霉原生质体的制备、再生及其遗传转化系统

原生质体是研究和建立真菌遗传转化系统的重要工具。为了建立原生质体介导的红曲霉遗传转化系统,考察了各种细胞壁裂解酶和渗透压稳定剂等对红曲霉原生质体形成和再生的影响。将红曲霉分生孢子在铺有玻璃纸的平板上30℃培养30~40 h收获的菌丝体最有利于原生质体的形成和释放。红曲霉菌丝体形成和释放原生质体最适裂解酶和酶解时间分别为：0.3 % lysing enzyme、0.1 % cellulase和1 % snailase的酶组合,30℃作用2.5 h;最适渗透压稳定剂是：1mol /L MgSO4。最适合原生质体再生的培养基为含0.6 mol/L蔗糖的CM培养基。原生质体液涂布单层再生培养基的方法,再生率最高,菌株M34和N18分别为8.5 %和36.4 %。在PEG和CaCl2存在下,以潮霉素B为抗生素选择标记,用质粒pBC-Hygro和pNL1共转化菌株M34原生质体,每微克DNA克获得100个稳定转化子。     

Preparation of protoplast-like structures from conidia ofFusarium culmorum

Protoplast-like structures have been formed by digestion of the cell walls ofFusarium culmorum conidia by lytic enzyme preparations ofMicromonospora AS. Under the test conditions extrusion of the protoplasts was not observed. It seems that digestion of the cell wall occurs in different stages. Digestion of the septa preceded the formation of protoplasts of the individual cells of the multicellularF. culmorum conidia. A few protoplasts survived the lytic enzyme treatment. “Protoplasts” obtained from conidia are much more stable than those obtained from young hyphae and were able to germinate with the formation of normal mycelium. Lysis of some of the protoplast bodies led to the formation of a membranous structure. The protoplasts derived from each of the constituent cells of the conidia could be isolated with the micromanipulator. No differences were found in the ability of the isolated cells to germinate.     

Studies of cotyledon protoplast cultures from Brassica napus,B. campestris and B. oleracea. I: Cell wall regeneration and cell division

Protoplasts isolated from cotyledons of a number of cultivars of Brassica napus, B. campestris and B. oleracea were cultured in different media to study the characteristics of cell wall regeneration and cell division at early stages of culture. Time course analysis using Calcolfluor White staining indicated that cell wall regeneration began in some protoplasts 2–4 h following isolation in all cultivars. 30–70% of cultured cotyledon protoplasts exhibited cell wall regeneration at 24 h and about 60–90% at 72 h after the initiation of culture. Results also indicated that a low percentage (0.4–5.4%) of cultured cotyledon protoplasts entered their first cell division one day after initial culture in all twelve cultivars. The percentage of dividing cells increased linearly up to 40% from 1 to 7 day, indicating that cotyledon protoplasts of Brassica had a high capacity for cell division. Factors that influence the level of cell wall regeneration and cell division during cotyledon protoplast culture have been investigated in this study. Cotyledons from seedlings germinated in a dark/dim light regime provided a satisfactory tissue source for protoplast isolation and culture for all Brassica cultivars used. The percentages of protoplasts exhibiting cell wall regeneration and division were significantly influenced by cultivar and species examined, with protoplasts from all five cultivars of B. campestris showing much lower rates of cell wall regeneration than those of B. napus and B. oleracea over 24–120 h, and with the levels of cell division in B. napus cultivars being much higher than those in B. campestris and B. oleracea over 1–9 days. The capacity of cell wall regeneration and cell division in cotyledon protoplast culture of the Brassica species appears under strong genetic control. Cell wall regeneration in protoplast culture was not affected by the culture medium used. In contrast, the composition of the culture medium played an important role in determining the level of cell division, and the interaction between medium type and cultivars was very significant.Abbreviations BA benzylaminopurine - CPW Composition of Protoplast Washing-solution - CW Calcolfluor White - EDTA ethylenediamine-tetraacetic acid - KT Kinetin - Md MS modified Murashige and Skoog medium - 2,4-d 2,4-dichlorophenoxyacetic acid - NAA -naphthaleneacetic acid - IAA indole-3-acetic acid - PAR photosynthetically active radiation - SDS sodium dodecyl sulfate