Components of fermentation medium regulate bacteriocin synthesis by the recombinant strain Lactococcus lactis subsp. lactis F-116

The regulation of the synthesis of bacteriocin produced by the recombinant strain Lactococcus lactis subsp. lactis F-116 has been studied. The synthesis is regulated by the components of the fermentation medium, the content of inorganic phosphate (KH2PO4), yeast autolysate (source of amine nitrogen), and changes in carbohydrates and amino acids. The strain was obtained by fusion of protoplasts derived from two related L. lactis subsp. lactis strains, both exhibiting a weak ability to synthesize the bacteriocin nisin. Decreasing the content of KH2PO4 from 2.0 to 1.0 or 0.5% caused bacteriocin production to go down from 4100 to 2800 or 1150 IU/ml, respectively; the base fermentation medium contained 1.0% glucose, 0.2% NaCl, 0.02% MgSO4, and yeast autolysate (an amount corresponding to 35 mg % ammonium nitrogen). The substitution of sucrose for glucose (as the source of carbon) increased the antibiotic activity by 26%, and the addition of isoleucine, by 28.5%. Elevation of the concentration of yeast autolysate in the low-phosphate fermentation medium stimulated both the growth of the lactococci and the synthesis of bacteriocin. Introduction of 1% KH2PO4, yeast autolysate (in an amount corresponding to 70 mg % ammonium nitrogen), 2.0% sucrose, and 0.1% isoleucine increased the bacteriocin-producing activity of the strain by 2.4 times.     

Influence of the phosphorus and nitrogen source on nisin production in Lactococcus lactis subsp. lactis batch fermentations using a complex medium

The influence of different phosphorus and nitrogen sources on Lactococcus lactis subsp. lactis NIZO 22186 growth and nisin production was studied in batch fermentations using a complex medium. KH₂PO₄ was found to be the best phosphorus source for nisin production. Increasing initial phosphate concentrations from 0 to 5% KH₂PO₄ exerted a double effect, creating favourable pH conditions and particularly stimulating the nisin production levels, which were highest at 5% KH₂PO₄. Up to now, no such high initial phosphate concentrations have been reported for the production of other antibiotics or bacteriocins. Nisin, a lanthionine-containing peptide antibiotic with bacteriocin properties, clearly behaved as a primary metabolite, since its formation was linked with active growth and was not suppressed by phosphate concentrations up to 5%. A complex medium supplemented with cotton seed meal as nitrogen source also gave very high nisin yields. Correspondence to: L. De Vuyst     

Characteristics and identification of bacteriocins produced by Lactococcus lactis subsp. lactis 194-K

The Lactococcus lactis subsp. lactis 194-K strain has been established to be able to produce two bacteriocins, one of which was identified as the known lantibiotic nisin A, and the other 194-D bacteriocin represents a polypeptide with a 2589-Da molecular mass and comprises 20 amino acid residues. Both bacteriocins were produced in varying proportions in all of the studied culture media, which support the growth of the producer. Depending on the cultivation medium, the nisin A content was 380- to 1123-fold lower in the 194-K stain culture broth than that of the 194-D peptide. In comparision to nisin A Bacteriocin 194-D possessed a wide range of antibacterial activity and suppressed the growth of both Gram-positive and Gram-negative bacteria. An optimal medium for 194-D bacteriocin synthesis was shown to be a fermentation medium which contained yeast extract, casein hydrolysate, and potassium phosphate. The biosynthesis of bacteriocin 194-D by the 194-K strain in these media occurred parallel to producer growth, and its maximal accumulation in the culture broth was observed at14–20 h of the strain’s growth.     

Genetic and molecular study of the inability of the yeast Kluyveromyces lactis var. drosophilarum to ferment lactose

The fermentation of lactose (Lac⁺) in the dairy yeast Kluyveromyces lactis var. lactis is controlled by the LAC4 (β-galactosidase) and LAC12 (lactose permease) genes. The complementation analysis of twelve Kl. lactis var. drosophilarum natural homothallic Lac^? strains of different origin was carried out using the genetic heterothallic lines of Kl. lactis var. lactis of the lac4LAC12 and LAC4lac12 genotypes. It was shown that the natural Lac^? strains did not possess the LAC4LAC12 gene cluster. Southern hybridization of chromosomal DNA with LAC4 and LAC12 probes, as well as recombination analysis, showed that Kl. lactis var. drosophilarum yeasts do not have even silent copies of these genes. As distinct from this yeast, natural Lac^? strains of the yeast Kl. marxianus are mutants impaired in the lactose permease gene (lac12 analogue), but possess an active β-galactosidase gene (LAC4 analogue). The origin of the LAC4LAC12 gene cluster of the dairy yeasts Kl. lactis is discussed.     

Partial characterisation of two bacteriocins produced byLactobacillus paracasei subsp.paracasei ST242BZ and ST284BZ and the effect of medium components on their production

The influence of medium components on production of bacteriocins ST242BZ (10.0 kDa) and ST284BZ (3.5 kDa) byLactobacillus paracasei subsp.paracasei ST242BZ and ST284BZ have been studied. Growth in MRS broth (pH of 6.5) yielded bacteriocin levels of 12800 AU/ml. Modified MRS with tryptone as the only nitrogen source, MRS supplemented with KH₂PO₄ (10–100 g/l), or MRS supplemented with thiamine increased bacteriocin ST242BZ production to 25600 AU/ml. Tryptone, combinations of tryptone, meat extract and yeast extract, or thiamine did not increase bacteriocin ST284BZ production. However, MRS supplemented with K₂HPO₄ (50–100 g/l) increased bacteriocin ST284BZ production up to 25600 AU/ml. Our results suggest that production of bacteriocins ST242BZ and ST284BZ are stimulated by potassium ions.     

UV-inducible proteins and UV-induced cross-protection against acid,ethanol, H2O2 or heat treatments in Lactococcus lactis subsp. lactis

The relationship between UV-irradiation-induced tolerance to different environmental stresses and change in protein synthesis was examined in Lactococcus lactis subsp lactis IL1403. The results showed that preirradiation of cultures of L. lactis subsp. lactis with UV_254nm light led to increased tolerance of usually lethal challenges to acid (pH 4.0), ethanol (20%, v/v), H₂O₂ (15 mM), or heat (52° C). This suggests that there is an overlapping regulation between the UV-induced pathway and the other stress responses. Whole-cell protein extracts from UV-treated (100 J/m²) and untreated cultures were compared using two-dimensional polyacrylamide gel electrophoresis. At least 14 polypeptides were induced in response to damage after UV irradiation, which indicated an SOS-like response in this species. The RecA protein, however, seemed not to be significantly induced in Lactococcus lactis subsp. lactis IL1403. Some of the UV-induced polypeptides overlaped with stress proteins induced by the other treatments.     

Bacteriocin-Producing Lactic Acid Bacteria Isolated from Mangrove Forests in Southern Thailand as Potential Bio-Control Agents: Purification and Characterization of Bacteriocin Produced by Lactococcus lactis subsp. lactis KT2W2L

The aim of this work was to purify and characterize the bacteriocin produced by Lactococcus lactis subsp. lactis KT2W2L previously isolated from mangrove forests in southern Thailand, in order to evaluate its potential as new food protective agent. The active peptide from the cell-free supernatant of this strain was purified in 4 steps: (1) precipitation with 70 % saturated ammonium sulfate, (2) elution on a reversed-phase cartridge using different concentrations of acetonitrile, (3) cation-exchange chromatography and (4) final purification by reversed-phase HPLC on a C₈ column. The molecular mass of 3,329.5254 Da of the purified bacteriocin, determined by mass spectrometry, is nearly identical to that of peptide nisin Z. The activity of the purified bacteriocin was unaffected by pH (2.0–10.0), thermostable but was sensitive to proteolytic enzymes. The bacteriocin activity was stable after 8 weeks of storage at ?20 °C and 7 weeks of storage at 4 °C, but decreased after 3 weeks of storage at 37 °C. It was stable when incubated for 1 month at 4 °C in 0–30 % NaCl. Inhibitory spectrum of this bacteriocin showed a wide range of activity against similar bacterial strains, food-spoilage and food-borne pathogens. L. lactis subsp. lactis KT2W2L was sensitive to kanamycin, penicillin and tetracycline but resistant to ampicillin, gentamicin and vancomycin. The fragment obtained after amplification of genomic DNA from L. lactis subsp. lactis KT2W2L, with specific primers for bacteriocin genes, presented 99 % homology to the nisin Z gene. PCR amplification demonstrated that L. lactis subsp. lactis KT2W2L does not harbor virulence genes cylA, cylB, efaAfs and esp. The bacteriocin and its producing strain may find application as bio-preservatives for reduction in food-spoilage and food-borne pathogens in food products.     

Improvement of Fermentation Conditions for the Production of X-Prolyl-Dipeptidyl Aminopeptidase from Lactococcus Lactis

The quantitative effects of some fermentation conditions on the production of the enzyme X-prolyl-dipeptidyl aminopeptidase (PepXP)(EC 3.4.14.5) of Lactococcus lactis subsp. lactis and cremoris were studied. The PepXP activity was found both in the membrane and in the cytoplasm, suggesting the presence of multiple molecular forms. Both microorganisms showed higher PepXP activities when glucose (5 g/l) was used as the carbon source and the yeast extract in the culture medium was increased to 3.5 g/l. In these conditions, 226 mU/ml of PepXP activity were obtained with L. lactis subsp. lactis and 235 mU/ml with the subsp. cremoris after 6 h. The best fermentation temperature was in the 30–32 °C range. The enzyme activity remained stable even during the stationary phase.     

Characterization of a plasmid involved with cointegrate formation and lactose metabolism in Lactococcus lactis subsp. lactis OZS1

A 55 kilobase (kb) plasmid (pOZS550) in the non-clumping Lactococcus lactis subsp. lactis strain OZS1 carrying genes for lactose metabolism was characterised. A mobilizable cointegrate plasmid which is formed between pOZS550 and pOZS448 carries the necessary information for conjugation and transfer. Cointegrate formation was found to involve an insertional element located on pOZS550. The insertion sequence was found to be identical to ISS1 located on pSK08 in the clumping L. lactis subsp. lactis strain ML3. Restriction maps of pOZS550 and pSK08 were similar suggesting a close ancestral relationship, although pSK08, in addition to the lactose metabolism genes, expressed genes for proteinase activity and cell clumping, which were not expressed by pOZS550, and carried two copies of ISS1 compared to one on pOZS550. Furthermore, hybridization of the 18 base pair inverted repeat, of the insertion sequence, with various L. lactis subsp. lactis strains and two L. lactis subsp. cremoris strains showed moderate to strong hybridization to one plasmid in each organism.     

Optimization of submerged culture conditions for exopolysaccharide production in <Emphasis Type="Italic">Sarcodon aspratus</Emphasis> (Berk) S.lto TG-3

The effect of medium components (carbon, nitrogen, and mineral sources) and environmental factors (initial pH and temperature) for mycelial growth and exopolysaccharide (EPS) production in Sarcodon aspratus(Berk) S.lto TG-3 was investigated. The optimal temperature (25°C) and initial pH (5.0) for the EPS production in shake flask cultures of S. aspratus were determined using the two-dimensional contour plot. The most suitable carbon, nitrogen, and mineral sources for EPS production were glucose, yeast extract, CaCl₂ and KH₂PO₄, respectively. Notably, the EPS production was significantly enhanced by supplementation of calcium ion. Subsequently, the optimum concentration of glucose (30gl^–1), yeast extract (15gl^–1), CaCl₂ (1.1gl^–1), and KH₂PO₄ (1.2gl^–1) were determined using the orthogonal matrix method. The effects of nutritional requirement on the mycelial growth of S.aspratuswere in regular sequence of glucose>KH₂PO₄>yeast extract>CaCl₂, and those on EPS production were in the order of glucose>yeast extract>CaCl₂>KH₂PO₄. Under the optimal culture conditions, the maximum EPS concentration in a 5-l stirred-tank reactor was 2.68gl^–1 after 4days of fermentation, which was 6-fold higher than that at a basal medium. The two-dimensional contour plot and orthogonal matrix method allowed us to find the relationship between environmental factors and nutritional requirement by determining optimal operating conditions for maximum EPS production in S.asparatus. The statistical experiments used in this work can be useful strategies for optimization of submerged culture processes for other mushrooms.     

Production of Bacteriocin ST33LD, Produced by Leuconostoc mesenteroides subsp. mesenteroides, as Recorded in the Presence of Different Medium Components

Summary Bacteriocin ST33LD, produced by Leuconostoc mesenteroides subsp. mesenteroides, is approximately 2.7 kDa in size and inhibits Enterococcus faecalis, Escherichia coli, Lactobacillus casei and Pseudomonas aeruginosa. Good growth was recorded in the presence of 10% (w/v) soy milk or 10% (w/v) molasses, but there was no bacteriocin production. Growth in MRS broth adjusted to pH 4.5 yielded low bacteriocin levels (800 AU/ml). However, the same medium adjusted to pH 5.0, 5.5 and 6.5, respectively, yielded 3200 AU/ml. Tween 80 decreased bacteriocin production by more than 50%. Growth in the presence of tryptone yielded maximal activity (12,800 AU/ml), whereas different combinations of tryptone, meat extract and yeast extract produced activity levels of 1600 AU/ml and less. Growth in the presence of 2.0% (w/v) sucrose, or maltose, yielded much higher levels of bacteriocin activity (12,800 AU/ml) compared to growth in the presence of 2.0% (w/v) glucose or lactose (6400 AU/ml). Lower yields were also recorded in the presence of fructose and mannose. KH₂PO₄ at 10.0% (w/v) stimulated bacteriocin production. Glycerol concentrations of 0.5% (w/v) and higher (up to 5.0%, w/v) repressed bacteriocin production by 50%. The addition of cyanocobalamin, thiamine and L-ascorbic acid to MRS broth (1.0 ppm) yielded 12,800 AU/ml bacteriocin, whereas the addition of DL-6,8-thioctic acid yielded only 6 400 AU/ml.     

Development of a low-cost medium for production of nisin from Lactococcus lactis subsp. lactis

The goal of this project was to develop a lower-cost medium for nisin production, so this bacteriocin could be used in a broader range of industrial fermentation processes. The objectives included: (1) evaluating methods for controlling the inhibitory effect of lactic acid produced during fermentation, and (2) comparing two inexpensive complex media for nisin production. Lactococcus lactis subsp. lactis was cultured in shake flasks on Laurel–Tryptose broth to evaluate a range of buffers for pH control. NaHCO₃ proved to be an effective buffer for increasing nisin production. Subsequent trials then evaluated condensed corn soluble (CCS, a fuel ethanol production byproduct) and cheese whey as inexpensive growth media. CCS was shown to be an efficient, low-cost medium for high nisin titers and yields. These modifications reduced the medium costs for nisin production from $600/kg nisin (based on Laurel–Tryptose broth medium) to $35–40/kg nisin for the corn solubles medium.     

Enhanced nisin and pediocin production on whey supplemented with different nitrogen sources

Production of nisin and pediocin were followed, respectively, in Lactococcus lactis subsp. lactis CECT 539 and Pediococcus acidilactici NRRL B-5627 grown with lactose and four different nitrogen sources. Neither NH₄Cl nor glycine improved production of the bacteriocins. Both yeast extract and Casitone increased pediocin production from 55 BU ml^–1 to 195 BU ml^–1 and 185 BU ml^–1, respectively. Nisin increased from 21 BU ml^–1 to 74 BU ml^–1 and 59 BU ml^–1 with these nitrogen sources.     

Glutathione Protects Lactococcus lactis against Oxidative Stress

Glutathione was found in several dairy Lactococcus lactis strains grown in M17 medium. None of these strains was able to synthesize glutathione. In chemically defined medium, L. lactis subsp. cremoris strain SK11 was able to accumulate up to ~60 mM glutathione when this compound was added to the medium. Stationary-phase cells of strain SK11 grown in chemically defined medium supplemented with glutathione showed significantly increased resistance (up to fivefold increased resistance) to treatment with H₂O₂ compared to the resistance of cells without intracellular glutathione. The resistance to H₂O₂ treatment was found to be dependent on the accumulation of glutathione in 16 strains of L. lactis tested. We propose that by taking up glutathione, L. lactis might activate a glutathione-glutathione peroxidase-glutathione reductase system in stationary-phase cells, which catalyzes the reduction of H₂O₂. Glutathione reductase, which reduces oxidized glutathione, was detectable in most strains of L. lactis, but the activities of different strains were very variable. In general, the glutathione reductase activities of L. lactis subsp. lactis are higher than those of L. lactis subsp. cremoris, and the activities were much higher when strains were grown aerobically. In addition, glutathione peroxidase is detectable in strain SK11, and the level was fivefold greater when the organism was grown aerobically than when the organism was grown anaerobically. Therefore, the presence of glutathione in L. lactis could result in greater stability under storage conditions and quicker growth upon inoculation, two important attributes of successful starter cultures.     

Optimization of <Emphasis Type="Italic">Verticillium lecanii</Emphasis> spore production in solid-state fermentation on sugarcane bagasse

Verticillium lecanii is an entomopathogen with high potential in biological control of pests. We developed a solid-state fermentation with sugarcane bagasse as carrier absorbing liquid medium to propagate V. lecanii spores. Using statistical experimental design, we optimized the medium composition for spore production. We first used one-factor-at-a-time design to identify corn flour and yeast extract as the best carbon and nitrogen sources for the spore production of V. lecanii. Then, we used two-level fractional factorial design to confirm corn flour, yeast extract, and KH₂PO₄ as important factors significantly affecting V. lecanii spore production. Finally, we optimized these selected variables using a central composite design and response surface method. The optimal medium composition was (grams per liter): corn flour 35.79, yeast 8.69, KH₂PO₄ 1.63, K₂HPO₄ 0.325, and MgSO₄ 0.325. Under optimal conditions, spore production reached 1.1 × 10¹⁰ spores/g dried carrier, much higher than that on wheat bran (1.7 × 10⁹ spores/g initial dry matter).     

Screening of lipid high producing mutant from rhodotorula glutinis by low ion implantation and study on optimization of fermentation medium

In order to obtain lipid producing strain with high-yield, the wild type stain Rhodotorula glutinis was treated by low ion implantation, and optimization of fermentation medium for higher lipid yield was carried out using mutant strain. It was found that the strain had a higher positive mutation rate when the output power was 10 keV and the dose of N⁺ implantation was 80 × 2.6 × 10¹³ ions/cm². Then a high-yield mutant strain D30 was obtained through cid-heating coupling ultrasonic method and lipid yield was 3.10 g/L. Additionally, the surface response method was used to optimize fermentation medium. The three significant factors (glucose, peptone, KH₂PO₄) were optimized using response surface methodology (RSM), and the optimized parameters of fermentation medium were as follows: glucose 73.40 g/L, peptone 1.06 g/L and KH₂PO₄ 3.56 g/L. Finally the fermentation characteristic of high-yield mutation strain D30 was studied, when fermentation time was 10 days, which lipid yield increased to 7.81 g/L. Fatty acid composition of the lipid was determined by GC, and the most represented fatty acids of mutant D30 were C16:0 (11.4 %), C16:1 (5.66 %), C18:1 (49.3 %), and C18:2 (27.0 %).     

Lactate removal by anionic-exchange resin improves nisin production by Lactococcus lactis

When lactate was removed from sucrose fermentation in situ, using the anionic-exchange resin Amberlite IRA-67, by Lactococcus lactis growing in batch culture, nisin production increased by two-fold when compared to the alkali pH-controlled fermentation. In comparison to sucrose, lactate removal increased nisin production 1.5-fold and 0.3-fold when galactose and glucose were used as carbon sources respectively.     

Permeabilization and lysis induced by bacteriocins and its effect on aldehyde formation by Lactococcus lactis

Permeabilization induced by lacticin 3147, lactococcins A, B and M, enterocin AS-48 and nisin, bacteriocins described as cell membrane-pore forming and lytic agents, enhanced in all cases aldehyde formation by Lactococcus lactis IFPL730. Nevertheless, the conversion of isoleucine into 2-methylbutyraldehyde depended not only on the degree of permeabilization but also on the bacteriocin that caused the cell membrane damage. The highest values of 2-methylbutyraldehyde corresponded to cell suspensions containing lacticin 3147 and lactococcins, treatments that provoked further lysis in addition to induced permeabilization.     

Cloning and Production of a Novel Bacteriocin, Lactococcin K, from Lactococcus lactis Subsp. lactis MY23

A gene encoding the antimicrobial peptide, lactococcin K, was isolated from Lactococcus lactis subsp. lactis MY23 then cloned and expressed in Escherichia coli. Because the expressed lactococcin K was formed as an inclusion body in recombinant E. coli, a fusion protein containing lactococcin K and maltose-binding protein (MBP) was produced in a soluble form. For high-level production of lactococcin K, we performed a pH-stat fed-batch culture to produce 43,000 AU lactococcin K ml⁻¹ in 12 h. Revisions requested 3 November 2005; Revisions received 7 December 2005     

Lacticin 3147 favours isoleucine transamination by Lactococcus lactis IFPL359 in a cheese-model system

The bacteriocin, lacticin 3147, increased isoleucine transamination by Lactococcus lactis IFPL359 in a cheese model system. The formation of -keto--methyl-n-valeric acid and 2-hydroxy-3-methyl-valeric acid increased by three times in cheese slurries at 12 °C and cheese aroma intensity increased as well, which corresponded with a higher 2-methylbutanal formation.