Three expressed sequences within the human beta-tubulin multigene family each define a distinct isotype

This paper describes the isolation and complete sequence of a novel expressed human beta-tubulin gene (beta 2). The sequence is compared with that of two other expressed human beta-tubulin genes (M40 and 5 beta). All are encoded by four exons. Though the boundaries of each exon are absolutely conserved among the three genes, the intervening sequences differ considerably in size and sequence content. Two of the genes (M40 and 5 beta) contain one (M40) or ten (5 beta) members of the middle repetitive Alu family sequences within one of their intervening sequences. Comparison of the amino acid sequences encoded by each gene reveals a high level of homology overall, though there is significant divergence between the carboxy termini of two of the genes. The pattern of expression of each beta-tubulin gene has been studied in several different human cell lines using unique non-crosshybridizing probes derived from the 3' untranslated regions. Two of the genes, M40 and beta 2, are expressed at varying levels in all of the cell lines examined, though the level of expression of one of these genes parallels the other in most cases. The third gene, 5 beta, is detectably expressed only in cells of neural origin. Thus, distinct human beta-tubulin isotypes are encoded by genes whose exon size and number has been conserved evolutionarily, but whose pattern of expression may be regulated either co-ordinately or uniquely. Of the approximately 15 sequences contained in the human beta-tubulin multigene family, nine have now been sequenced fully. The overall composition of the multigene family and the evolutionary relationships among its various members are discussed.     

Sequence and expression of the chicken beta 5- and beta 4-tubulin genes define a pair of divergent beta-tubulins with complementary patterns of expression.

We have determined the nucleotide sequence of the chicken beta 5 (c beta 5)-tubulin gene. The gene displayed the coding structure common to all previously studied vertebrate beta-tubulin genes and was divided into four exon sequences interrupted by three intervening sequences (located between codons 19 and 20, within codon 56, and within codon 93). Comparison of the predicted polypeptide sequence encoded by c beta 5 with those of four other available chicken beta-tubulin sequences revealed that c beta 5 encoded a highly divergent beta-tubulin polypeptide isotype which was distinguished from previously known sequences primarily by two discrete variable sequence domains. However, c beta 5 uniquely shared identity in 16 residue positions with another divergent chicken beta-tubulin gene, c beta 4. These common sequences distinguished c beta 4 and c beta 5 from the remaining three chicken beta-tubulin genes. Analysis of the expression of c beta 5 and c beta 4 revealed a strikingly complementary pattern of gene expression: c beta 5 was expressed in a wide variety of cell and tissue types but not in neurons, whereas c beta 4 expression was detected uniquely in neuronal cells. Overall, these findings suggest the existence of two divergent families of beta-tubulin sequences in the chicken and further raise the possibility that the complementary expression of the c beta 4 and c beta 5 genes may fulfill a requirement for the presence of a divergent beta-tubulin polypeptide isotype in all cell types.     

Repetitive DNA sequences in the human corticotropin-beta-lipotrophin precursor gene region: Alu family members.

Repetitive DNA sequences in the human corticotropin-beta-lipotropin precursor gene region have been studied by blot hybridization analysis and DNA sequencing. Six repetitive sequences are present in this gene region; five of them are Alu family members with an approximate length of 300 base pairs, and the other consists of a portion of an Alu family sequence. Two of these Alu family members are located in the 5'-flanking region of the gene, and the remaining four within the intervening sequences. These Alu family sequences constitute inverted repeats in the intervening sequences as well as in the 5'-flanking region of the gene.     

Nucleotide sequence of the gene for human prothrombin

A human genomic DNA library was screened for the gene coding for human prothrombin with a cDNA coding for the human protein. Eighty-one positive lambda phage were identified, and three were chosen for further characterization. These three phage hybridized with 5' and/or 3' probes prepared from the prothrombin cDNA. The complete DNA sequence of 21 kilobases of the human prothrombin gene was determined and included a 4.9-kilobase region that was previously sequenced. The gene for human prothrombin contains 14 exons separated by 13 intervening sequences. The exons range in size from 25 to 315 base pairs, while the introns range from 84 to 9447 base pairs. Ninety percent of the gene is composed of intervening sequence. All the intron splice junctions are consistent with sequences found in other eukaryotic genes, except for the presence of GC rather than GT on the 5' end of intervening sequence L. Thirty copies of Alu repetitive DNA and two copies of partial KpnI repeats were identified in clusters within several of the intervening sequences, and these repeats represent 40% of the DNA sequence of the gene. The size, distribution, and sequence homology of the introns within the gene were then compared to those of the genes for the other vitamin K dependent proteins and several other serine proteases.     

The beta globin gene cluster of the prosimian primate Galago crassicaudatus: nucleotide sequence determination of the 41-kb cluster and comparative sequence analyses.

The nucleotide sequence of the beta globin gene cluster of the prosimian Galago crassicaudatus has been determined. A total sequence spanning 41,101 bp contains and links together previously published sequences of the five galago beta-like globin genes (5'-epsilon-gamma-psi eta-delta-beta-3'). A computer-aided search for middle interspersed repetitive sequences identified 10 LINE (L1) elements, including a 5' truncated repeat that is orthologous to the full-length L1 element found in the human epsilon-gamma intergenic region. SINE elements that were identified included one Alu type I repeat, four Alu type II repeats, and two methionine tRNA-derived Monomer (type III) elements. Alu type II and Monomer sequences are unique to the galago genome. Structural analyses of the cluster sequence reveals that it is relatively A+T rich (about 62%) and regions with high G+C content are associated primarily with globin coding regions. Comparative analyses with the beta globin cluster sequences of human, rabbit, and mouse reveal extensive sequence homologies in their genic regions, but only human, galago, and rabbit sequences share extensive intergenic sequence homologies. Divergence analyses of aligned intergenic and flanking sequences from orthologous human, galago, and rabbit sequences show a gradation in the rate of nucleotide sequence evolution along the cluster where sequences 5' of the epsilon globin gene region show the least sequence divergence and sequences just 5' of the beta globin gene region show the greatest sequence divergence.     

Sequence of chicken c beta 7 tubulin. Analysis of a complete set of vertebrate beta-tubulin isotypes

In chicken, beta-tubulin is encoded by a family of seven genes. We have now isolated and sequenced overlapping cDNA clones corresponding to gene c beta 7 (previously designated c beta 4'), the only chicken beta-tubulin not previously characterized. The inferred amino acid sequence of c beta 7 tubulin is identical with the class I beta-tubulin isotype found in human, mouse and rat. Moreover, c beta 7 is highly expressed in almost all tissue and cell types in chicken, a pattern similar to those of the genes for class I beta-tubulin isotypes in other vertebrates. Comparison of the complete family of chicken beta-tubulin gene sequences reveals that the heterogeneity of beta-tubulin polypeptides encoded in a higher eukaryote is confined to six distinct beta-tubulin isotypes. Five of these are members of evolutionarily conserved isotypic classes (I to V), whereas the sixth represents a divergent erythroid-specific tubulin whose sequence has not been conserved.     

Clustering and subfamily relationships of the Alu family in the human genome

Thirteen and 10 sequences of the Alu family of repeated DNA elements found within the human thymidine kinase and beta-tubulin genes, respectively, were compared. These genes have approximately five times the expected density of Alu family members. The consensus sequence that could be drawn from these 23 Alu family members would differ slightly from others drawn from random Alu family sequences but only at very heterogeneous positions. The different Alu family members do show different pairwise percentage identities, with approximately 15% (7 of 48 Alu family members analyzed) of them clearly representing a separate subfamily of sequences. This analysis also confirms the species- specific differences between human and the prosimian Galago crassicaudatus Alu family members. These data are consistent with both the origin of these sequences in primates less than 65-70 Myr ago and amplification since that time to their present 500,000 copies. The data do not show any special relationships among densely clustered Alu family members.      

The structure of the human apolipoprotein C-II gene. Electron microscopic analysis of RNA:DNA hybrids, complete nucleotide sequence, and identification of 5' homologous sequences among apolipoprotein genes

Cloned human apo-C-II cDNA was used as a hybridization probe to identify the human apo-C-II gene in a genomic library constructed in our laboratory. The isolated apo-C-II DNA was studied both by electron microscopy and by direct sequence analysis. Ultrastructural morphological analysis of RNA-DNA hybrids revealed that the apo-C-II gene had complex structures because of regions of inverted complementary sequences in and around the gene forming stem-and-loop structures which interfere with the formation of stable RNA:DNA hybrids. Extensive morphological analysis revealed a minimum of 3 intervening sequences (IVS), and their lengths were measured. Direct sequence analysis of the cloned gene confirmed the presence of 3 IVS. There are 4 Alu type sequences in IVS-I. We sequenced 4340 nucleotides which include 545 nucleotides in the 5' flanking region, the entire gene which spans 3320 nucleotides, and 475 nucleotides in the 3' flanking region which also encompasses an additional Alu sequence. The 5' end of the gene was identified by primer extension and sequencing of the primer extended cDNA. Apo-C-II mRNA structure was deduced from the cDNA sequence, the primer extension experiments, and the genomic sequence. It is 494 nucleotides in length. Its sequence differs from previously published sequences in that there are 7 additional nucleotides before the polyadenylate tail. In the 5' flanking region, nucleotides -234 to -213 encompass a GC-rich region which exhibits high homology (greater than 70%) to the 5' flanking regions of the genes of all the apolipoproteins published to date, namely, apo-A-II (-497 to -471), apo-A-I (approximately -196 to -179), apo-E (-409 to -391), and apo-C-III (approximately -116 to -103). This highly conserved region might represent some evolutionarily conserved sequences from these related genes and/or might represent a region with regulatory function.     

Invasion of the human albumin-alpha-fetoprotein gene family by Alu, Kpn, and two novel repetitive DNA elements

The human albumin-alpha-fetoprotein genomic domain contains 13 repetitive DNA elements randomly distributed throughout the symmetrical structures of these genes. These repeated sequences are located at different sites within the two genes. The human albumin gene contains five Alu elements within four of its 14 intervening sequences. Two of these repeats are located in intron 2, and the remaining three are located in introns 7, 8, and 11. The human alpha-fetoprotein gene contains three of these Alu elements, one in intron 4 and the remaining two in the 3'-untranslated region. In addition, the human alpha-fetoprotein gene contains a Kpn repeat and two classes of novel repeats that are absent from the human albumin gene. Six of the Alu elements within the two genes are bound by short direct repeats that harbor five base substitutions in 120 possible positions (60 bp times 2 termini). The absence of Alu repeats from analogous positions in rodents indicates that these repeats invaded the albumin-alpha-fetoprotein domain less than 85 Myr ago (the time of mammalian radiation). Furthermore, considering the conservation of terminal repeats flanking the Alu sequences of the albumin-alpha-fetoprotein domain (0.042 changes per site), we submit that the average time of Alu insertion into this gene family could have been as recently as 15-30 Myr ago.     

Molecular structure of the human albumin gene is revealed by nucleotide sequence within q11-22 of chromosome 4

The human albumin gene spans 16,961 nucleotides from the putative "Cap" site to the first poly(A) addition site. It is split into 15 exons by 14 intervening sequences which are symmetrically placed within the three domains of albumin. The 5' region is highly conserved up to position -250 and contains the putative TATA (-32) and CAT (-88) boxes. A consensus 5' splice sequence reads /GTAGAGT while the 3' splice sequence is pyrimidine rich and contains CTAG/ at the splice junction. The gene contains three polyadenylation signals, and this 3' region presumably arose by triplication of a shorter fragment prior to mammalian radiation. The albumin gene exhibits a high degree of DNA polymorphism and appears to have been recently invaded by Alu repetitive sequences.     

Identification and functional analysis of beta-tubulin genes by site specific integrative transformation in Aspergillus nidulans

We have cloned two different beta-tubulin sequences from the filamentous fungus Aspergillus nidulans. Each was used in the construction of transforming plasmids that carry the pyr4 gene of Neurospora crassa. We used these plasmids to transform a pyrG-strain of Aspergillus to uridine prototrophy. Both plasmids were shown to integrate site specifically into the homologous chromosomal sequences. We then used transformant strains in genetic crosses to demonstrate that one of the cloned beta-tubulin sequences was the benA beta-tubulin gene, which codes for the beta 1-and beta 2-tubulins. The other cloned beta-tubulin sequence was shown to be the structural gene for beta 3-tubulin by gene disruption and to participate in conidial development. This is the first report of a gene disruption by site specific, integrative recombination in Aspergillus nidulans.     

A high frequency of length polymorphisms in repeated sequences adjacent to Alu sequences

We describe a new class of DNA length polymorphism that is due to a variation in the number of tandem repeats associated with Alu sequences (Alu sequence-related polymorphisms). The polymerase chain reaction was used to selectively amplify a (TTA)n repeat identified in the 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA) reductase gene from genomic DNA of 41 human subjects, and the size of the amplified products was determined by gel electrophoresis. Seven alleles were found that differed in size by integrals of three nucleotides. The allele frequencies ranged from 1.5% to 52%, and the overall heterozygosity index was 62%. The polymorphic TTA repeat was located adjacent to a repetitive sequence of the Alu family. A homology search of human genomic DNA sequences for the trinucleotide TTA (at least five members in length) revealed tandem repeats in six other genes. Three of the six (TTA)n repeats were located adjacent to Alu sequences, and two of the three (in the genes for beta-tubulin and interleukin-1 alpha) were found to be polymorphic in length. Tandemly repetitive sequences found in association with Alu sequences may be frequent sites of length polymorphism that can be used as genetic markers for gene mapping or linkage analysis.     

Long terminal repeat-like elements flank a human immunoglobulin epsilon pseudogene that lacks introns

There are at least three immunoglobulin epsilon genes (C epsilon 1, C epsilon 2, and C epsilon 3) in the human genome. The nucleotide sequences of the expressed epsilon gene (C epsilon 1) and one (C epsilon 3) of the two epsilon pseudogenes were compared. The results show that the C epsilon 3 gene lacks the three intervening sequences entirely and has a 31-base A-rich sequence 16 bases 3' to the putative poly(A) addition signal, indicating that the C epsilon 3 gene is a processed gene. The C epsilon 3 gene sequence is homologous to the five separate DNA segments of the C epsilon 1 gene; namely, a segment in the 5'-flanking region (100 bases) and four exons, which are interrupted by a spacer region or intervening sequences. Long terminal repeat (LTR)-like sequences which contain TATAAA and AATAAA sequences as well as terminal inverted repeats are present in both 5'- and 3'-flanking regions. The 5' and 3' LTR-like sequences do not, however, constitute a direct repeat, unlike transposable elements of eukaryotes and retroviruses. The 3' LTR-like sequence is repetitive in the human genome, but is not homologous to the Alu family DNA. Models for the evolutionary origin of the processed gene flanked by the LTR-like sequences are discussed. The C epsilon 3 gene has a new open frame which codes potentially for an unknown protein of 292 amino acid residues.     

Base sequence studies of 300 nucleotide renatured repeated human DNA clones

A band of 300 nucleotide long duplex DNA is released by treating renatured repeated human DNA with the single strand-specific endonuclease S₁. Since many of the interspersed repeated sequences in human DNA are 300 nucleotides long, this band should be enriched in such repeats. We have determined the nucleotide sequences of 15 clones constructed from these 300 nucleotide S₁-resistant repeats. Ten of these cloned sequences are members of the Alu family of interspersed repeats. These ten sequences share a recognizable consensus sequence from which individual clones have an average divergence of 12.8%. The 300 nucleotide Alu family consensus sequence has a dimeric structure and was evidently formed from a head to tail duplication of an ancestral monomeric sequence. Three of the remaining clones are variations on a simple pentanucleotide sequence previously reported for human satellite III DNA. Two of the 15 clones have distinct and complex sequences and may represent other families of interspersed repeated sequences.     

Evolution of Alu repeats surrounding the human ferredoxin gene

Ferredoxin is an iron-sulfur protein that serves as an electron carrier for the mitochondrial oxidation/reduction system. During the characterization of the human ferredoxin gene, we have identified three Alu sequences surrounding it. When these Alu sequences were compared with others, all three of them are more related to the consensus Alu than the 7SL gene, the progenitor of the Alu family. It suggests that they are members of the modern Alu family. Their sequences differ from the Alu consensus sequence by about 5%, indicating that they were inserted into the chromosome about 35 million years ago.