Reconstitutive refolding of diacylglycerol kinase, an integral membrane protein

While the formation of kinetically trapped misfolded structural states by membrane proteins is related to a number of diseases, relatively few studies of misfolded membrane proteins in their purified state have been carried out and few methods for refolding such proteins have been reported. In this paper, misfolding of the trimeric integral membrane protein diacylglycerol kinase (DAGK) is documented and a method for refolding the protein is presented; 65 single-cysteine mutants of DAGK were examined. A majority were found to have lower-than-expected activities when purified into micellar solutions, with additional losses in activity often being observed following membrane reconstitution. A variety of evidence indicates that the low activities observed for most of these mutants results from kinetically based misfolding of the protein, with misfolding often being manifested by the formation of aberrant oligomeric states. A method referred to as "reconstitutive refolding" for correcting misfolded DAGK is presented. This method is based upon reconstituting DAGK into multilamellar POPC vesicles by dialyzing the detergent dodecylphosphocholine out of mixed micellar mixtures. For 55 of the 65 mutants tested, there was a gain of DAGK activity during reconstitutive refolding. In 33 of these cases, the gain in activity was greater than 2-fold. The refolding results for cysteine replacement mutants at DAGK sites known to be highly conserved provide teleological insight into whether sites are conserved, because they are critical for catalysis, for maintenance of the proper folding pathway, or for some other reason.     

Kinetic study of folding and misfolding of diacylglycerol kinase in model membranes

Despite the relevance of membrane protein misfolding to a number of common diseases, our understanding of the folding and misfolding of membrane proteins lags well behind soluble proteins. Here, the overall kinetics of membrane insertion and folding of the homotrimeric integral membrane protein diacylglycerol kinase (DAGK) is addressed. DAGK was purified into lipid/detergent-free urea and guanidinium solutions and subjected to general structural characterization. In urea, the enzyme was observed to be monomeric but maintained considerable tertiary structure. In guanidinium, it was also monomeric but exhibited much less tertiary structure. Aliquots of these DAGK stock solutions were diluted 200-fold into lipid vesicles or into detergent/lipid mixed micelles, and the rates and efficiencies of folding/insertion were monitored. Reactions were also carried out in which micellar DAGK solutions were diluted into vesicular solutions. Productive insertion of DAGK from denaturant solutions into mixed micelles occurred much more rapidly than into lipid vesicles, suggesting that bilayer transversal represents the rate-limiting step for DAGK assembly in vesicles. The efficiency of productive folding/insertion into vesicles was highest in reactions initiated with micellar DAGK stock solutions (where DAGK maintains a nativelike fold and oligomeric state) and lowest in reactions starting with guanidinium stocks (where DAGK is an unfolded monomer). Moreover, the final ratio of irreversibly misfolded DAGK to reversibly misfolded enzyme was highest following reactions initiated with guanidinium stock solutions and lowest when micellar stocks were used. Finally, it was also observed that very low concentrations of detergents were able to both enhance the bilayer insertion rate and suppress misfolding.     

The multisubunit structure of synaptophysin. Relationship between disulfide bonding and homo-oligomerization

Synaptophysin, a major membrane protein of synaptic vesicles, contains four transmembrane regions and two intravesicular loops. Synaptophysin monomers associate into homopolymers that have the potential to form channels in the synaptic vesicle membrane. Here we show that in native synaptophysin, homopolymers are linked by noncovalent forces. The molecule contains unstable intramolecular disulfide bonds that undergo disulfide exchange during solubilization, thereby covalently cross-linking neighboring synaptophysin molecules. The locations of the intramolecular disulfide bonds in synaptophysin were determined, revealing that each of the two intravesicular loops of synaptophysin is circularized by a single disulfide bond. Cross-linking of synaptophysin by disulfide bonds can be triggered in synaptic vesicles and in intact cells by a cycle of reduction and oxidation, suggesting that native synaptophysin is a homomultimer in situ. In addition, chemical cross-linking of native synaptophysin demonstrates that a low molecular weight protein is specifically associated with synaptophysin complexes and is lost upon reduction of the intramolecular disulfide bonds. These data suggest that native synaptophysin forms a noncovalent homomultimeric complex whose structure and interaction with other proteins are dependent on the integrity of its intramolecular disulfide bonds and phospholipid environment.     

Functionality of a membrane protein in bicelles

Bicelles are bilayered discoidal lipid-detergent assemblies which are useful as model membranes. To date, there has been no direct demonstration of functional viability for an integral membrane protein reconstituted into bicelles. In this contribution, the catalytic activity of diacylglycerol kinase (DAGK) was measured following reconstitution into several different bicelle systems and compared to activities measured in traditional mixed micelles and vesicles. For the most optimal bicelle systems tested, DAGK activities approached those observed in mixed micelles or vesicles. For some other bicellar mixtures tested, activities were much lower, with steady-state kinetic data indicating reduced V(max) rather than perturbations in substrate K(m). Catalytically, DAGK showed a strong preference for bicelles containing 3-(cholamidopropyl)dimethylammonio-2-hydroxy-1-propanesulfonate (CHAPSO) as the detergentcomponent relative to short-chained phosphatidylcholine.DAGK also exhibited a preference for dimyristoylphosphatidylcholine or dipalmitoylphosphatidylcholine bicelles relative to those of dilauroylphosphatidylcholine.     

Studies on the function of yeast protein disulfide isomerase in renaturation of proteins.

Renaturation of two enzymes lacking disulfide bonds, citrate synthase (CS), and glyceraldehyde 3-phosphate dehydrogenase (GAPDH) and another protein containing disulfide bonds, lysozyme (LZM), were studied in order to dissect the possible chaperone function from the isomerase function of yeast protein disulfide isomerase (PDI). Our findings suggest no independent chaperone activity of yeast PDI with respect to the two enzymes lacking disulfide bonds, GAPDH and CS, since neither of these enzymes required PDI for renaturation. In contrast, a high level of renaturation of LZM was observed in the presence of PDI. Renaturation of LZM involved formation and rearrangement of disulfide bonds. Additional studies using LZM as a substrate were done to examine the role of cysteine residues in the two active sites of PDI. Studies with a series of cysteine to serine mutants and truncation mutants of yeast PDI revealed that the two active sites of PDI were not equal in activity. An intramolecular disulfide bond in at least one active site of PDI was required for the oxidation of reduced LZM. The first cysteine in each active site was necessary for disulfide bond rearrangement, i.e., isomerization, in LZM, while the second cysteine was not.     

Irreversible misfolding of diacylglycerol kinase is independent of aggregation and occurs prior to trimerization and membrane association

Escherichia coli diacylglycerol kinase (DAGK) is a homotrimeric helical integral membrane protein in which a number of single-site mutations to cysteine are known to promote misfolding. Here, effects of other amino acid replacements have been explored using a folding assay based on the dilution of acidic urea/DAGK stock solutions into detergent/lipid mixed micelles. DAGK with an I110P or I110R mutation in the third transmembrane helix could not be purified because its expression was toxic to the E. coli host, most likely because of severe folding defects. Other mutations at Ile110 enhanced irreversible misfolding to varying degrees that generally correlated both with the polarity of the inserted amino acid and with the degree of protein destabilization. However, the I110W mutant was an exception in that it was highly misfolding prone while at the same time being more stable than the wild-type protein. This contrasts with I110Y, which also exhibited enhanced stability but folded with an efficiency similar to that of the wild type. For most mutants, the critical step leading to irreversible misfolding occurred for monomeric DAGK prior to trimerization and independent of association with mixed micelles. Misfolding of DAGK evidently involves the formation of incorrect monomer tertiary structure. Mutations appear to enhance misfolding by disfavoring the formation of correct structure rather than by directly stabilizing the misfolded state. Finally, when urea-solubilized DAGK was diluted into detergent/lipid-free buffer, it retained a significant degree of folding competency over a period of minutes. This property may be relevant to membrane protein folding in cells under conditions where the usual machinery associated with membrane integration is saturated, dysregulated, or dysfunctional.     

Differential protein mobility of the gamma-aminobutyric acid, type A, receptor alpha and beta subunit channel-lining segments

The gamma-aminobutyric acid, type A (GABAA), receptor ion channel is lined by the second membrane-spanning (M2) segments from each of five homologous subunits that assemble to form the receptor. Gating presumably involves movement of the M2 segments. We assayed protein mobility near the M2 segment extracellular ends by measuring the ability of engineered cysteines to form disulfide bonds and high affinity Zn(2+)-binding sites. Disulfide bonds formed in alpha1beta1E270Cgamma2 but not in alpha1N275Cbeta1gamma2 or alpha1beta1gamma2K285C. Diazepam potentiation and Zn2+ inhibition demonstrated that expressed receptors contained a gamma subunit. Therefore, the disulfide bond in alpha1beta1E270Cgamma2 formed between non-adjacent subunits. In the homologous acetylcholine receptor 4-A resolution structure, the distance between alpha carbon atoms of 20' aligned positions in non-adjacent subunits is approximately 19 A. Because disulfide trapping involves covalent bond formation, it indicates the extent of movement but does not provide an indication of the energetics of protein deformation. Pairs of cysteines can form high affinity Zn(2+)-binding sites whose affinity depends on the energetics of forming a bidentate-binding site. The Zn2+ inhibition IC50 for alpha1beta1E270Cgamma2 was 34 nm. In contrast, it was greater than 100 microM in alpha1N275Cbeta1gamma2 and alpha1beta1gamma2K285C receptors. The high Zn2+ affinity in alpha1beta1E270Cgamma2 implies that this region in the beta subunit has a high protein mobility with a low energy barrier to translational motions that bring the positions into close proximity. The differential mobility of the extracellular ends of the beta and alpha M2 segments may have important implications for GABA-induced conformational changes during channel gating.     

Probing the dark state tertiary structure in the cytoplasmic domain of rhodopsin: proximities between amino acids deduced from spontaneous disulfide bond formation between Cys316 and engineered cysteines in cytoplasmic loop 1

A dark state tertiary structure in the cytoplasmic domain of rhodopsin is presumed to be the key to the restriction of binding of transducin and rhodopsin kinase to rhodopsin. Upon light-activation, this tertiary structure undergoes a conformational change to form a new structure, which is recognized by the above proteins and signal transduction is initiated. In this and the following paper in this issue [Cai, K., Klein-Seetharaman, J., Altenbach, C., Hubbell, W. L., and Khorana, H. G. (2001) Biochemistry 40, 12479-12485], we probe the dark state cytoplasmic domain structure in rhodopsin by investigating proximity between amino acids in different regions of the cytoplasmic face. The approach uses engineered pairs of cysteines at predetermined positions, which are tested for spontaneous formation of disulfide bonds between them, indicative of proximity between the original amino acids. Focusing here on proximity between the native cysteine at position 316 and engineered cysteines at amino acid positions 55-75 in the cytoplasmic sequence connecting helices I-II, disulfide bond formation was studied under strictly defined conditions and plotted as a function of the position of the variable cysteines. An absolute maximum was observed for position 65 with two additional relative maxima for cysteines at positions 61 and 68. The observed disulfide bond formation rates correlate well with proximity of these residues found in the crystal structure of rhodopsin in the dark. Modeling of the engineered cysteines in the crystal structure indicates that small but significant motions are required for productive disulfide bond formation. During these motions, secondary structure elements are retained as indicated by the lack of disulfide bond formation in cysteines that do not face toward Cys316 in the crystal structure model. Such motions may be important in light-induced conformational changes.     

Oxidation of human lens recombinant alphaA-crystallin and cysteine-deficient mutants

Disulfide cross-linking, one of the results of oxidative stress, has been thought to play an important role in cataractogenesis. High molecular mass (HMM) protein aggregation also contributes to cataract development, and a prevailing speculation is that disulfide cross-linking induces HMM aggregation. However, there is no direct evidence to support this speculation. Dimerization is an effect of disulfide cross-linking but cannot explain the size of HMM aggregates observed in the lens. alphaA-crystallin has two cysteine residues (Cys131 and Cys142) and we have prepared three Cys-deficient mutants, two single mutants (C131I and C142I) and one double mutant (C131I/C142I). They were subjected to H202 oxidation in an ascorbate-FeCl(3)-EDTA-H202 system. The effects of oxidation on the mutants, including changes in aggregate size and conformation, were compared with those of the wild-type alphaA-crystallin by FPLC gel filtration, absorption, fluorescence, and circular dichroism measurements. The results indicated that other amino acid residues besides Cys, such as Trp and Tyr, were also oxidized by H202. Disulfide dimerization alone seems to play a less important role in HMM aggregation than does the secondary conformational change resulting from the combined effect of the oxidation of Trp and Tyr as well as Cys.     

Mobility of Lower MA-Helices for Ion Conduction through Lateral Portals in 5-HT3A Receptors

The intracellular domain of the serotonin type 3A receptor, a pentameric ligand-gated ion channel, is crucial for regulating conductance. Ion permeation through the extracellular vestibule and the transmembrane channel is well understood, whereas the specific ion conduction pathway through the intracellular domain is less clear. The intracellular domain starts with a short loop after the third transmembrane segment, followed by a short α-helical segment, a large unstructured loop, and finally, the membrane-associated MA-helix that continues into the last transmembrane segment. The MA-helices from all five subunits form the extension of the transmembrane ion channel and shape what has been described as a “closed vestibule,” with their lateral portals obstructed by loops and their cytosolic ends forming a tight hydrophobic constriction. The question remains whether the lateral portals or cytosolic constriction conduct ions upon channel opening. In our study, we used disulfide bond formation between pairs of engineered cysteines to probe the proximity and mobility of segments of the MA-helices most distal to the membrane bilayer. Our results indicate that the proximity and orientation for cysteine pairs at I409C/R410C, in close proximity to the lateral windows, and L402C/L403C, at the cytosolic ends of the MA-helices, are conducive for disulfide bond formation. Although conformational changes associated with gating promote cross-linking for I409C/R410C, which in turn decreases channel currents, cross-linking of L402C/L403C is functionally silent in macroscopic currents. These results support the hypothesis that concerted conformational changes open the lateral portals for ion conduction, rendering ion conduction through the vertical portal unlikely.     

Redox-dependent oligomerization through a leucine zipper motif is essential for MG53-mediated cell membrane repair

We recently discovered that MG53, a muscle-specific tripartite motif (TRIM) family protein, functions as a sensor of oxidation to nucleate the assembly of cell membrane repair machinery. Our data showed that disulfide bond formation mediated by Cys242 is critical for MG53-mediated translocation of intracellular vesicles toward the injury sites. Here we test the hypothesis that leucine zipper motifs in the coiled-coil domain of MG53 constitute an additional mechanism that facilitates oligomerization of MG53 during cell membrane repair. Two leucine zipper motifs in the coiled-coil domain of MG53 (LZ1 - L176/L183/L190/V197 and LZ2 - L205/L212/L219/L226) are highly conserved across the different animal species. Chemical cross-linking studies show that LZ1 is critical for MG53 homodimerization, whereas LZ2 is not. Mutations of the conserved leucines into alanines in LZ1, not in LZ2, diminish the redox-dependent oligomerization of MG53. Live cell imaging studies demonstrate that the movement of green fluorescent protein (GFP)-tagged MG53 mutants (GFP-LA1 and GFP-LA2) is partially compromised in response to mechanical damage of the cell membrane, and the GFP-LA1/2 double mutant is completely ineffective in translocation toward the injury sites. In addition to the leucine zipper-mediated intermolecular interaction, redox-dependent cross talk between MG53 appears to be an obligatory step for cell membrane repair, since in vivo modification of cysteine residues with alkylating reagents can prevent the movement of MG53 toward the injury sites. Our data show that oxidation of the thiol group of Cys242 and leucine zipper-mediated interaction among the MG53 molecules both contribute to the nucleation process for MG53-mediated cell membrane repair.     

Role of disulfide bonds in biologic activity of human interleukin-6.

We have examined the functional importance of the two disulfide bonds formed by the four conserved cysteines of human interleukin (IL-6). Using a bacterial expression system, we have synthesized a series of recombinant IL-6 mutants in which the constituent cysteines of the first (Cys45-Cys51), second (Cys74-Cys84), or both disulfide bonds of recombinant human interleukin-6 were replaced by other amino acids. Each mutant was partially purified and tested in four representative bioassays. While mutants lacking Cys45 and Cys51 retained activity similar to nonmutated recombinant IL-6, the activity of mutants lacking Cys74 and Cys84 was significantly reduced, especially in assays involving human cell lines. These results indicate that the first disulfide bond of human interleukin-6 is not required for maintenance of normal biologic activity. However, the fact that mutants lacking Cys45 and Cys51 were more active than corresponding cysteine-free mutants indicates that the disulfide bond formed by these residues contributes to biologic activity in the absence of the second disulfide bond. Competition binding studies with representative mutants indicate that their affinity for the human IL-6 receptor parallels their biologic activities on human cells.     

Cross-linking of sites involved with alcohol action between transmembrane segments 1 and 3 of the glycine receptor following activation

The glycine receptor is a member of the Cys-loop, ligand-gated ion channel family and is responsible for inhibition in the CNS. We examined the orientation of amino acids I229 in transmembrane 1 (TM1) and A288 in TM3, which are both critical for alcohol and volatile anesthetic action. We mutated these two amino acids to cysteines either singly or in double mutants and expressed the receptors in Xenopus laevis oocytes. We tested whether disulfide bonds could form between A288C in TM3 paired with M227C, Y228C, I229C, or S231C in TM1. Application of cross-linking (mercuric chloride) or oxidizing (iodine) agents had no significant effect on the glycine response of wild-type receptors or the single mutants. In contrast, the glycine response of the I229C/A288C double mutant was diminished after application of either mercuric chloride or iodine only in the presence of glycine, indicating that channel gating causes I229C and A288C to fluctuate to be within 6 Å apart and form a disulfide bond. Molecular modeling was used to thread the glycine receptor sequence onto a nicotinic acetylcholine receptor template, further demonstrating that I229 and A288 are near-neighbors that can cross-link and providing evidence that these residues contribute to a single binding cavity.     

Selective Removal of Individual Disulfide Bonds within a Potato Type II Serine Proteinase Inhibitor from Nicotiana alata Reveals Differential Stabilization of the Reactive-Site Loop

The 53-amino-acid trypsin inhibitor 1 from Nicotiana alata (T1) belongs to the potato type II family also known as the PinII family of proteinase inhibitors, one of the major families of canonical proteinase inhibitors. T1 contains four disulfide bonds, two of which (C4-C41 and C8-C37) stabilize the reactive-site loop. To investigate the influence of these two disulfide bonds on the structure and function of potato II inhibitors, we constructed two variants of T1, C4A/C41A-T1 and C8A/C37A-T1, in which these two disulfide bonds were individually removed and replaced by alanine residues. Trypsin inhibition assays show that wild-type T1 has a K_i of < 5 nM, C4A/C41A-T1 has a weaker K_i of ∼ 350 nM, and the potency of the C8A/C37A variant is further decreased to a K_i of ∼ 1.8 μM. To assess the influence of the disulfide bonds on the structure of T1, we determined the structure and dynamics of both disulfide variants by NMR spectroscopy. The structure of C4A/C41A-T1 and the amplitude of intrinsic flexibility in the reactive-site loop resemble that of the wild-type protein closely, despite the lack of the C4-C41 disulfide bond, whereas the timescale of motions is markedly decreased. The rescue of the structure despite loss of a disulfide bond is due to a previously unrecognized network of interactions, which stabilizes the structure of the reactive-site loop in the region of the missing disulfide bond, while allowing intrinsic motions on a fast (picosecond-nanosecond) timescale. In contrast, no comparable interactions are present around the C8-C37 disulfide bond. Consequently, the reactive-site loop becomes disordered and highly flexible in the structure of C8A/C37A-T1, making it unable to bind to trypsin. Thus, the reactive-site loop of T1 is stabilized differently by the C8-C37 and C4-C41 disulfide bonds. The C8-C37 disulfide bond is essential for the inhibitory activity of T1, whereas the C4-C41 disulfide bond is not as critical for maintaining the three-dimensional structure and function of the molecule but is responsible for maintaining flexibility of the reactive-site loop on a microsecond-nanosecond timescale.     

Catalysis of protein disulfide bond isomerization in a homogeneous substrate

Protein disulfide isomerase (PDI) catalyzes the rearrangement of nonnative disulfide bonds in the endoplasmic reticulum of eukaryotic cells, a process that often limits the rate at which polypeptide chains fold into a native protein conformation. The mechanism of the reaction catalyzed by PDI is unclear. In assays involving protein substrates, the reaction appears to involve the complete reduction of some or all of its nonnative disulfide bonds followed by oxidation of the resulting dithiols. The substrates in these assays are, however, heterogeneous, which complicates mechanistic analyses. Here, we report the first analysis of disulfide bond isomerization in a homogeneous substrate. Our substrate is based on tachyplesin I, a 17-mer peptide that folds into a beta hairpin stabilized by two disulfide bonds. We describe the chemical synthesis of a variant of tachyplesin I in which its two disulfide bonds are in a nonnative state and side chains near its N and C terminus contain a fluorescence donor (tryptophan) and acceptor (N(epsilon)-dansyllysine). Fluorescence resonance energy transfer from 280 to 465 nm increases by 28-fold upon isomerization of the disulfide bonds into their native state (which has a lower E(o') = -0.313 V than does PDI). We use this continuous assay to analyze catalysis by wild-type human PDI and a variant in which the C-terminal cysteine residue within each Cys-Gly-His-Cys active site is replaced with alanine. We find that wild-type PDI catalyzes the isomerization of the substrate with kcat/K(M) = 1.7 x 10(5) M(-1) s(-1), which is the largest value yet reported for catalysis of disulfide bond isomerization. The variant, which is a poor catalyst of disulfide bond reduction and dithiol oxidation, retains virtually all of the activity of wild-type PDI in catalysis of disulfide bond isomerization. Thus, the C-terminal cysteine residues play an insignificant role in the isomerization of the disulfide bonds in nonnative tachyplesin I. We conclude that catalysis of disulfide bond isomerization by PDI does not necessarily involve a cycle of substrate reduction/oxidation.     

Role of disulfide bonds in modulating internal motions of proteins to tune their function: molecular dynamics simulation of scorpion toxin Lqh III

A series of 1-ns MD simulations were performed on the scorpion toxin Lqh III in native and disulfide bond broken states. The removal of disulfide bonds has caused hydrogen bond network alteration in the five-residue turn, the long loop, the alpha-helix, the loop connecting strands II and III, and the C-terminal region. In addition and more importantly, it has influenced the amplitude of the fluctuations of five-residue turn, loops, and C-terminal region with a minor effect on the fluctuations of the cysteines in the broken bond sites. These findings suggest that disulfide bonds are not the most important factors in rigidifying their own locations, while they have more important effects at a global scale. Furthermore, our results reveal that disulfide bonds have considerable influence on the functionally important essential modes of motions and the correlations between the motions of the binding site residues. Therefore, we can conclude that disulfide bonds have a crucial role in modulating the function via adjusting the dynamics of scorpion toxin molecules. Although this conclusion cannot be generalized to all peptides and proteins, it demonstrates the importance of more investigations on this aspect of disulfide bond efficacy.     

Relative Movements of Transmembrane Regions at the Outer Mouth of the Cystic Fibrosis Transmembrane Conductance Regulator Channel Pore during Channel Gating

Multiple transmembrane (TM) segments line the pore of the cystic fibrosis transmembrane conductance regulator Cl(-) channel; however, the relative alignment of these TMs and their relative movements during channel gating are unknown. To gain three-dimensional structural information on the outer pore, we have used patch clamp recording to study the proximity of pairs of cysteine side chains introduced into TMs 6 and 11, using both disulfide cross-linking and Cd(2+) coordination. Following channel activation, disulfide bonds could apparently be formed between three cysteine pairs (of 15 studied): R334C/T1122C, R334C/G1127C, and T338C/S1118C. To examine the state dependence of cross-linking, we combined these cysteine mutations with a nucleotide-binding domain mutation (E1371Q) that stabilizes the channel open state. Investigation of the effects of the E1371Q mutation on disulfide bond formation and Cd(2+) coordination suggests that although R334C/T1122C and T338C/S1118C are closer together in the channel open state, R334C/G1127C are close together and can form disulfide bonds only when the channel is closed. These results provide important new information on the three-dimensional structure of the outer mouth of the cystic fibrosis transmembrane conductance regulator channel pore: TMs 6 and 11 are close enough together to form disulfide bonds in both open and closed channels. Moreover, the altered relative locations of residues in open and in closed channels that we infer allow us to propose that channel opening and closing may be associated with a relative translational movement of TMs 6 and 11, with TM6 moving "down" (toward the cytoplasm) during channel opening.     

Determination of the disulfide bond pairings in bovine transforming growth factor-alpha

A rapid method for determining the three disulfide bond pairings in bovine transforming growth factor-alpha (bTGF-alpha) was developed by digesting bTGF-alpha with thermolysin followed by separation of the generated peptides by reversed-phase HPLC. The disulfide-bonded peptides were identified by amino acid sequencing and fast atom bombardment mass spectrometry. The disulfide bond pairings in bTGF-alpha were determined to be homologous to those in the human and mouse TGF-alpha molecules. A species of low bioactivity isolated from the folding/oxidation mixture of chemically synthesized bTGF-alpha was demonstrated to contain two incorrect disulfide bonds. These results indicate that mispairing of disulfide bonds in bTGF-alpha significantly reduces the activity of this molecule.     

Characterization of disulfide bonds in human nucleoside triphosphate diphosphohydrolase 3 (NTPDase3): implications for NTPDase structural modeling

Cell-surface nucleotidases (NTPDases) contain 10 invariant cysteine residues in their extracellular regions. To investigate disulfide structure in human NTPDase3, we made single and double mutants of these 10 cysteines, and analyzed their enzymatic activity, glycosylation pattern, trafficking to the cell membrane, and sensitivity to reduction. The mutants constituted five distinct phenotypes, thus, strongly suggesting disulfide bonds between C92-C116 (first bond), C261-C308 (second bond), C289-C334 (third bond), C347-C353 (fourth bond), and C399-C422 (fifth bond). Due to conservation of the 10 cysteines, the identified five disulfide bonds are likely to exist in all cell-surface NTPDases. The third and fifth bonds are also present in the soluble NTPDases and are critical for processing, trafficking, and enzymatic activity. The fourth bond has minimal effect on processing and function, while the first and second bonds are of intermediate importance. Most of the N-linked glycosylation sites in the wild-type enzyme are processed to complex oligosaccharides, but at least one site is high-mannose or hybrid in structure. Interestingly, disruption of the first disulfide bond resulted in some enzyme that lost sensitivity to endoglycosidase H, suggesting that the first disulfide bond in the wild-type enzyme shields some high-mannose glycans from terminal glycosylation. Comparative modeling by threading and homology modeling of the NTPDase3 sequence revealed a high degree of structural fold similarity with a bacterial exopolyphosphatase (PDB ). The resultant theoretical 3-D model of the extracellular portion of NTPDase3, based on homology with this exopolyphosphatase, is consistent with the assignment of the disulfide bonds occurring in regions of good fold similarity between NTPDase3 and the exopolyphosphatase. The 3-D model obtained for NTPDase3 also suggests the structural basis for the importance of several apyrase conserved regions for the nucleotidase activities of the NTPDases.     

Mutations of either or both Cys876 and Cys888 residues of sarcoplasmic reticulum Ca2+-ATPase result in a complete loss of Ca2+ transport activity without a loss of Ca2+-dependent ATPase activity. Role of the CYS876-CYS888 disulfide bond.

Disulfide-containing peptides in pepsin digest of sarcoplasmic reticulum vesicles were identified by using a fluorogenic thiol-specific reagent 4-fluoro-7-sulfamoylbenzofurazan and a reductant tributylphosphine. Sequencing of the purified peptides revealed the presence of a Cys(876)-Cys(888) disulfide bond on the luminal loop connecting the 7th and 8th transmembrane helices (loop 7-8) of the Ca(2+)-ATPase (SERCA1a). We substituted either or both of these cysteine residues with alanine and made three mutants (C876A, C888A, C876A/C888A), in which the disulfide bond is disrupted. The mutants and the wild type were expressed in COS-1 cells, and functional analysis was performed with the microsomes isolated from the cells. Electrophoresis performed under reducing and non-reducing conditions confirmed the presence of Cys(876)-Cys(888) disulfide bond in the expressed wild type. All the three mutants possessed high Ca(2+)-ATPase activity. In contrast, no Ca(2+) transport activity was detected with these mutants. These mutants formed almost the same amount of phosphoenzyme intermediate as the wild type from ATP and from P(i). Detailed kinetic analysis showed that the three mutants hydrolyze ATP in the mechanism well accepted for the Ca(2+)-ATPase; activation of the catalytic site upon high affinity Ca(2+) binding, formation of ADP-sensitive phosphoenzyme, subsequent rate-limiting transition to ADP-insensitive phosphoenzyme, and hydrolysis of the latter phosphoenzyme. It is likely that the pathway for delivery of Ca(2+) from the binding sites into the lumen of vesicles is disrupted by disruption of the Cys(876)-Cys(888) disulfide bond, and therefore that the loop 7-8 having the disulfide bond is important for formation of the proper structure of the Ca(2+) pathway.