Immobilization of lipase on epoxy activated (1-->3)-alpha-D-glucan isolated from Penicillium chrysongenum

A water-insoluble linear (1-->3)-alpha-D-glucan was isolated from Penicillium mycelia. Three kinds of epoxy-activated microspheres of this glucan were prepared as supports for Candida sp. lipase (EC3.1.1.3) immobilization. The highest immobilization yield was 36.4%. The specific activity was 26.85 U/mg, and only 4.1% of activity was lost in comparison with the free enzyme used for immobilization. The higher thermal stability, storage stability, and reusability of the immobilized lipase make it a potential candidate for wide application.     

Immobilization of lipase to chitosan beads using a natural cross-linker

Genipin, a reagent of plant origin was used for the immobilization of lipase by cross-linking to chitosan beads. The catalytic properties and operational and storage stabilities of the immobilized lipase were compared with the soluble lipase. Under optimum conditions, 198 microg protein was bound per g chitosan with a protein-coupling yield of 35%. The hydrolytic activity was 10.8 U/g chitosan and the relative specific activity was 108%. The immobilized lipase showed better thermal and pH stabilities compared to the soluble form. The immobilized enzyme exhibited mass transfer limitations as reflected by a higher apparent K(m) value and a lower energy of activation. The immobilized enzyme retained about 74% of its initial activity after five hydrolytic cycles.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

改性壳聚糖固定化脂肪酶的研究

以化学改性后的壳聚糖为载体固定假丝酵母99-125脂肪酶,研究了不同的活化剂对壳聚糖表面羟基基团的活化程度,及以活化后壳聚糖为载体采用不同固定化方法对假丝酵母脂肪酶固定效果的影响。结果表明1-乙基-3-(3-甲基氨基)丙基碳二亚胺可有效的活化壳聚糖表面羟基,活化后的壳聚糖表面氨基与戊二醛偶联后形成的壳聚糖为良好的脂肪酶固定化载体,其固定脂肪酶的水解活力可高达86.8U/g。此外,还对影响固定化进程中的各种因素进行了研究,确定最优条件,比较了固定化前后酶的热稳定性、有机溶剂稳定性及最适反应温度。并考察了该固定化脂肪酶催化合成棕榈酸十六酯的操作稳定性,结果表明,连续反应16批之后棕榈酸十六酯的转化率仍能达到85%以上。     

Immobilization of Burkholderia sp. lipase on a ferric silica nanocomposite for biodiesel production

In this work, lipase produced from an isolated strain Burkholderia sp. C20 was immobilized on magnetic nanoparticles to catalyze biodiesel synthesis. Core-shell nanoparticles were synthesized by coating Fe(3)O(4) core with silica shell. The nanoparticles treated with dimethyl octadecyl [3-(trimethoxysilyl) propyl] ammonium chloride were used as immobilization supporters. The Burkholderia lipase was then bound to the synthesized nanoparticles for immobilization. The protein binding efficiency on alkyl-functionalized Fe(3)O(4)-SiO(2) was estimated as 97%, while the efficiency was only 76% on non-modified Fe(3)O(4)-SiO(2). Maximum adsorption capacity of lipase on alkyl-functionalized Fe(3)O(4)-SiO(2) was estimated as 29.45 mg g(-1) based on Langmuir isotherm. The hydrolytic kinetics (using olive oil as substrate) of the lipase immobilized on alkyl-grafted Fe(3)O(4)-SiO(2) followed Michaelis-Menten model with a maximum reaction rate and a Michaelis constant of 6251 Ug(-1) and 3.65 mM, respectively. Physical and chemical properties of the nanoparticles and the immobilized lipase were characterized by Brunauer-Emmett-Teller (BET) analysis, scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FT-IR). Moreover, the immobilized lipase was used to catalyze the transesterification of olive oil with methanol to produce fatty acid methyl esters (FAMEs), attaining a FAMEs conversion of over 90% within 30 h in batch operation when 11 wt% immobilized lipase was employed. The immobilized lipase could be used for ten cycles without significant loss in its transesterification activity.     

Lipolytic activities of a lipase immobilized on six selected supporting materials

Six different types of materials including PVC, chitosan, chitin, agarose, Sepharose, and Trisacryl were evaluated for their lipase-coupling efficiencies. Among those tested, chitosan yielded the highest amount of lipase (79 mg/mL packed gel) immobilized but with lowest oil hydrolytic activity (0.03 mg eq/mL gel). The amount of lipase immobilized was affected by the length of the hydrocarbon chain attached to the PVC matrix but not by the pore size of the supports used. On the other hand, the specific activity of the immobilized lipase was affected by the pore size but not by the chain length of the hydrocarbon attached to the support. After immobilization, the optimal reaction pH was shifted from 7.5 to 8.5 and the optimal reaction temperature from 35 to 45-55 degrees C. Lipase immobilized on PVC exhibited higher thermal stability than that on agarose. The half-life of the PVC immobilized lipase operating at 30 degrees C in a packed-bed reactor was estimated to be about 400 h.     

Preparation of PVA/chitosan lipase membrane reactor and its application in synthesis of monoglyceride

Polyvinyl alcohol (PVA)/chitosan (CS) composite lipase membrane was prepared in this paper, which was used for enzymatic processing of fats and oils. The parameters, such as concentration of lipase, pH, and cross-linking agent as well as metal ions, which influence the immobilization of lipase in membrane, were optimized. The immobilized activity of lipase was 2.64 IU/cm² with recovery of 24%. The membrane reactor was used in a two-phase system reaction to synthesize monoglyceride (MG) by hydrolysis of palm oil, which was reused for at least nine batches with yield of 32–50%.     

Rice straw as a support for immobilization of microbial lipase.

Candida rugosa lipase was covalently immobilized on rice straw activated with glutaraldehyde using poly(ethylene glycol) (PEG) as the stabilizing agent. The effects of PEG molecular weight and enzyme loading were studied according to a full 2(2) factorial design. Higher immobilization yields (>70%) were attained when the lipase loading was 95 units/mg of dry support, independent of PEG molecular weight. All derivatives showed high hydrolytic and synthetic activities. This work provides preliminary results on the use of agricultural residues as a support matrix for immobilizing lipase and on the application of the resulting derivatives to butyl butyrate synthesis as a study model.     

大孔树脂固定化脂肪酶及在微水相中催化合成生物柴油的研究

以不同大孔树脂吸附法固定化假丝酵母99_125脂肪酶,在微水有机相中的应用表明非极性树脂NKA是最佳的固定化载体。分别以正庚烷及磷酸盐缓冲液作为固定化介质,发现在正庚烷介质中树脂NKA的固定化效率能够达到98.98%,与采用磷酸盐缓冲液作为介质相比,固定化酶的水解活力和表观酶活回收率分别提高了4.07和3.43倍。考察了在微水相中固定化酶催化合成生物柴油的催化性能,结果表明,在给酶量为1.92∶1(初始酶粉与树脂的质量比),pH值为7.4,体系水含量为15%(水与油的质量比),反应温度为40℃条件下,固定化酶具有最佳的催化能力;以正庚烷为介质固定化脂肪酶催化合成生物柴油,采用三次流加甲醇的方式,单批转化率最高达到97.3%,连续反应19批以后转化率仍保持为70.2%。     

Covalent coupling method for lipase immobilization on controlled pore silica in the presence of nonenzymatic proteins

Candida rugosa lipase was covalently immobilized on silanized controlled pore silica previously activated with glutaraldehyde in the presence of nonenzymatic proteins. This strategy is suggested to protect the enzyme from aggregation effects or denaturation that occurs as a result of the presence of silane precursors used in the formation of the silica matrix. The immobilization yield was evaluated as a function of the lipase loading and the additive type (albumin and lecithin) using statistical concepts. In agreement with the mathematical model, the maximum coupling yield (32.2%) can be achieved working at high lipase loading (450 units x g(-1) support) using albumin as an additive. In these conditions, the resulting immobilized lipase exhibits high hydrolytic (153.2 U x mg(-1)) and esterification (337.6 mmol x g(-1) x min) activities. The enhanced activity of the final lipase derivative is the sum of the benefits of the immobilization (that prevents enzyme aggregation) and the lipase coating by additives that increases the accessibility of active sites to the substrate.     

Immobilization of Candida cylindracea lipase on poly lactic acid,polyvinyl alcohol and chitosan based ternary blend film: Characterization,activity, stability and its application for N-acylation reactions

The ecofriendly ternary blend polymer film was prepared from the chitosan (CH), polylactic acid (PLA) and polyvinyl alcohol (PVA). Immobilization of Candida cylindracea lipase (CCL) was carried out on ternary blend polymer via entrapment methodology. The ternary blend polymer and immobilized biocatalyst were characterized by using N₂ adsorption–desorption isotherm, SEM, FTIR, DSC, and (%) water content analysis through Karl Fischer technique. Biocatalyst was then subjected for the determination of practical immobilization yield, protein loading and specific activity. Immobilized biocatalyst was further applied for the determination of biocatalytic activity for N-acylation reactions. Various reaction parameters were studied such as effect of immobilization support (ratio of PLA:PVA:CH), molar ratio (dibutylamine:vinyl acetate), solvent, biocatalyst loading, time, temperature, and orbital speed rotation. The developed protocol was then applied for the N-acylation reactions to synthesize several industrially important acetamides with excellent yields. Interestingly, immobilized lipase showed fivefold higher catalytic activity and better thermal stability than the crude extract lipase CCL. Furthermore various kinetic and thermodynamic parameters were studied and the biocatalyst was efficiently recycled for four successive reuses. It is noteworthy to mention that immobilized biocatalyst was stable for period of 300 days.     

Removal of heavy metals from aqueous solution using Rhizopus delemar mycelia in free and polyurethane-bound form

This study assesses the ability of mycelia of Rhizopus delemar (both free and immobilized on polyurethane foam) to remove heavy metals from single-ion solutions as well as from a mixture of them. All experiments were conducted using 0.5-5 mm solutions of CuSO4 x 5H2O, CoCl2-6H2O and FeSO4 7H2O. Mycelia immobilized on polyurethane foam cells showed some times increase in uptake compared with that of free cells. Metal ions accumulation from a mixed solution was decreased slightly for cobalt and iron and considerable for copper ions. Heavy metal uptake was examined in the immobilized column experiments and more than 92% heavy metal removal (mg heavy metals removed/mg heavy metals added) from a mixed solution was achieved during the 5 cycles. During these experiments, the dry weight of the immobilized cells was decreased by only 2%. These results showed that immobilized mycelia of Rhizopus delemar can be used repeatedly for removal of heavy metals from aqueous solutions.     

Fabrication of an organic–inorganic nanocomposite carrier for enzyme immobilization based on metal–organic coordination

An organic–inorganic nanocomposite which combined mesoporous silica SBA-15 and chitosan using a carboxyl functionalized ionic liquid as the bridging agent (SBA@CS) was successfully fabricated, and was used to immobilize porcine pancreas lipase (PPL) by physical adsorption, cross-linking and metal–organic coordination, respectively. The as-prepared carriers were characterized by scanning electron microscopy, Fourier transform infrared and energy-dispersive X-ray spectroscopy. Compared with immobilization onto the pure mesoporous silicon material SBA-15, all the batches of PPL immobilized onto organic–inorganic nanocomposites showed higher activity, improved stability and reusability as well as better resistance to pH and temperature changes. Among the immobilized PPLs, immobilization based on Co²⁺ coordination (SBA@CS-Co-PPL) produced the best enzymatic properties. The maximum immobilization efficiency and specific activity of 79.6% and 1975.8 U g⁻¹ were obtained with SBA@CS-Co, separately. More importantly, the activity of immobilized enzyme can still maintain 84.0% after 10 times of reuse. These results demonstrated that thus prepared organic–inorganic nanocomposite could be an ideal carrier for enzyme immobilization by metal–organic coordination.     

用吸附法固定化培养紫草细胞

采用生物活性载体 ,通过吸附固定化方式 ,结合液体石蜡原位萃取技术 ,培养紫草细胞。测定了细胞生长、底物消耗和产物合成的动力学 ,紫草宁产率为 0 .916 g/g干重细胞和 0 .95 3g/g干重接种细胞 ,分别为悬浮培养的 12 .7倍和 6 .3倍。同时 ,对吸附与包埋固定化方法进行了综合比较 ,探讨了吸附固定化方法的应用前景。     

Production of isomaltooligosaccharides by a-glucosidase immobilized in chitosan beads and by polyethyleneimine-glutaraldehyde treated mycelia of Aspergillus carbonarious

Partially purified a-glucosidase from Aspergillus carbonarious, immobilized on glutaraldehyde-activated chitosan beads in a packed bed reactor, produced isomaltooligosaccharides at a yield of 60% (w/w) using 30% (w/v) maltose solution. Using intact mycelia attached with polyethyleneimine-glutaraldehyde, produced isomaltooligosaccharides at a yield of 46% (w/w) using 30% (w/v) maltose solution. Batchwise reaction stabilities were improved for chitosan beads immobilized enzyme and polyethyleneimine-glutaraldehyde treated mycelia as compared to mycelia without any treatment.     

Optimum conditions for lipase immobilization on chitosan-coated Fe3O4 nanoparticles

Magnetic Fe₃O₄-chitosan nanoparticles are prepared by the coagulation of an aqueous solution of chitosan with Fe₃O₄ nanoparticles. The characterization of Fe₃O₄-chitosan is analyzed by FTIR, FESEM, and SQUID magnetometry. The Fe₃O₄-chitosan nanoparticles are used for the covalent immobilization of lipase from Candida rugosa using N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysuccinimide (NHS) as coupling agents. The response surface methodology (RSM) was employed to search the optimal immobilization conditions and understand the significance of the factors affecting the immobilized lipase activity. Based on the ridge max analysis, the optimum immobilization conditions were immobilization time 2.14 h, pH 6.37, and enzyme/support ratio 0.73 (w/w); the highest activity obtained was 20 U/g Fe₃O₄-chitosan. After twenty repeated uses, the immobilized lipase retains over 83% of its original activity. The immobilized lipase shows better operational stability, including wider thermal and pH ranges, and remains stable after 13 days of storage at 25 °C.     

溶胶凝胶法固定化黑曲霉脂肪酶的性质研究

近年来溶胶-凝胶法固定脂肪酶已成为研究热点。选用TMOS、MTMS、ETMS和PTMS 4种硅烷试剂对黑曲霉脂肪酶进行了固定化研究。固定化的最佳配方为ETMS/TMOS=5：1、水与硅烷试剂分子比为8;固定化脂肪酶的固定率为80.2%、相对活性为136.3%;以乳化橄榄油作为底物,在50℃和pH4.0的条件下,固定化脂肪酶与游离脂肪酶K_m分别为1.899×10^-4M和2.789×10^-4M;最适反应pH均为pH4.0,固定化脂肪酶在pH4.0~pH5.5之间其活性能保持95%以上;固定化脂肪酶最适反应温度为60℃,较游离脂肪酶提高了10℃;固定化脂肪酶的酸碱稳定性和热稳定性较非固定化酶有显著的提高。固定化脂肪酶的使用寿命和保存稳定性良好,使用12次后仍能够保留71.7%活性,在室温避光条件下保存180天后仍可保留79.2%活性。     

Enhanced Biocatalytic Esterification with Lipase-Immobilized Chitosan/Graphene Oxide Beads

In this work, lipase from Candida rugosa was immobilized onto chitosan/graphene oxide beads. This was to provide an enzyme-immobilizing carrier with excellent enzyme immobilization activity for an enzyme group requiring hydrophilicity on the immobilizing carrier. In addition, this work involved a process for the preparation of an enzymatically active product insoluble in a reaction medium consisting of lauric acid and oleyl alcohol as reactants and hexane as a solvent. This product enabled the stability of the enzyme under the working conditions and allowed the enzyme to be readily isolated from the support. In particular, this meant that an enzymatic reaction could be stopped by the simple mechanical separation of the “insoluble” enzyme from the reaction medium. Chitosan was incorporated with graphene oxide because the latter was able to enhance the physical strength of the chitosan beads by its superior mechanical integrity and low thermal conductivity. The X-ray diffraction pattern showed that the graphene oxide was successfully embedded within the structure of the chitosan. Further, the lipase incorporation on the beads was confirmed by a thermo-gravimetric analysis. The lipase immobilization on the beads involved the functionalization with coupling agents, N-hydroxysulfosuccinimide sodium (NHS) and 1-ethyl-(3-dimethylaminopropyl) carbodiimide (EDC), and it possessed a high enzyme activity of 64 U. The overall esterification conversion of the prepared product was 78% at 60°C, and it attained conversions of 98% and 88% with commercially available lipozyme and novozyme, respectively, under similar experimental conditions.     

桦褶孔菌漆酶固定化及其对染料的降解

采用壳聚糖交联法和海藻酸钠-壳聚糖包埋交联法固定化桦褶孔菌产生的漆酶,探讨最佳固定化条件,固定化漆酶的温度,pH稳定性及操作稳定性,并以两种固定化酶分别对4种染料进行了降解.结果表明:(1)壳聚糖交联法固定化漆酶的最佳条件为:壳聚糖2.5%,戊二醛7%,交联时间2h,固定化时间5h,给酶量1g壳聚糖小球:1mL酶液(1U/mL),固定化效率56%;(2)海藻酸钠-壳聚糖包埋交联法固定化漆酶的最佳条件为:海藻酸钠浓度4%,壳聚糖浓度0.7%,氯化钙浓度5%,戊二醛浓度0.6%,给酶量4mL 4%海藻酸钠:1mL酶液(1U/mL),固定化效率高达86%;(3)固定化的漆酶相比游离漆酶有更好的温度和pH稳定性;(4)比较两种固定化漆酶,海藻酸钠-壳聚糖包埋交联法固定化酶的温度及酸度稳定性要优于壳聚糖固定化酶,但可重复操作性要弱于后者,两者重复使用8次后的剩余酶活比率分别为71%及64%;(5)两种固定化酶对所选的4种不同结构的合成染料均有较好的降解效果,其中壳聚糖固定化酶对茜素红的降解效果及重复使用性极佳,重复降解40mg/L的茜素红10次,降解率仍保持在100%.     

Purification and in situ immobilization of lipase from of a mutant of Trichosporon laibacchii using aqueous two-phase systems

The crude intracellular lipase (cell homogenate) from Trichosporon laibacchii was subjected to partial purification by aqueous two-phase system (ATPS) and then in situ immobilization by directly adding diatomites as carrier to the top PEG-rich phase of ATPS. A partition study of lipase in the ATPS formed by polyethylene glycol–potassium phosphate has been performed. The influence of system parameters such as molecular weight of PEG, system phase composition and system pH on the partitioning behaviour of lipase was evaluated. The ATPS consisting of PEG 4000 (12%) and potassium phosphate (K₂HPO₄, 13%) resulted in partition of lipase to the PEG-rich phase with partition coefficient 7.61, activity recovery 80.4%, and purification factor of 5.84 at pH of 7.0 and 2.0% NaCl. Moreover, the in situ immobilization of lipase in PEG phase resulted in a highest immobilized lipase activity of 1114.6 U g^?1. The above results show that this novel lipase immobilization procedure which couples ATPS extract and enzyme immobilization is cost-effective as well as time-saving. It could be potentially useful technique for the purification and immobilization of lipase.