Directly labeled DNA probes using fluorescent nucleotides with different length linkers.

Directly labeled fluorescent DNA probes have been made by nick translation and PCR using dUTP attached to the fluorescent label, Cy3, with different length linkers. With preparation of probes by PCR we find that linker length affects the efficiency of incorporation of Cy3-dUTP, the yield of labeled probe, and the signal intensity of labeled probes hybridized to chromosome target sequences. For nick translation and PCR, both the level of incorporation and the hybridization fluorescence signal increased in parallel when the length of the linker arm is increased. Under optimal conditions, PCR yielded more densely labeled probes, however, the yield of PCR labeled probe decreased with greater linear density of labeling. By using a Cy3-modified dUTP with the longest linker under optimal conditions it was possible to label up to 28% of the possible substitution sites on the target DNA with reasonable yield by PCR and 18% by nick translation. A mechanism involving steric interactions between the polymerase, cyanine-labeled sites on template and extending chains and the modified dUTP substrate is proposed to explain the inverse correlation between the labeling efficiency and the yield of DNA probe synthesis by PCR.     

XRCC1 and PCNA are loading platforms with distinct kinetic properties and different capacities to respond to multiple DNA lesions

Background  

Genome integrity is constantly challenged and requires the coordinated recruitment of multiple enzyme activities to ensure efficient repair of DNA lesions. We investigated the dynamics of XRCC1 and PCNA that act as molecular loading platforms and play a central role in this coordination.     

NMR studies of DNA duplexes singly cross-linked by different synthetic linkers.

Molecular modelling studies resulted in the design of a variety of non-nucleotidic covalent linkers to bridge the 3'-end of the (+)-strand and the 5'-end of the (-)-strand in DNA duplexes. Three of these linkers were synthesized and used to prepare singly cross-linked duplexes d(GTGGAATTC)-linker-d(GAATTCCAC). Linker I is an assembly of a propylene-, a phosphate- and a second propylene-group and is thought to mimic the backbone of two nucleotides. Linkers II and III consist of five and six ethyleneglycol units, respectively. The melting temperatures of the cross-linked duplexes are 65 degrees C for I and 73 degrees C for II and III, as compared with 36 degrees C for the corresponding non-linked nonadeoxynucleotide duplex. The three cross-linked duplexes were structurally characterized by nuclear magnetic resonance spectroscopy. The 1H and 31P resonance assignments in the DNA stem were obtained using standard methods. For the resonance assignment of the linker protons, two-dimensional 1H-31P heteronuclear COSY and two-quantum-experiments were used. Distance geometry calculations with NOE-derived distance constraints were performed and the resulting structures were energy-minimized. In duplex I, the nucleotides flanking the propylene-phosphate-propylene-linker do not form a Watson-Crick base pair, whereas in duplexes II and III the entire DNA stem is in a B-type double helix conformation.     

DNA bending by charged peptides: electrophoretic and spectroscopic analyses

We are testing the idea that placement of fixed charges near one face of the DNA double helix can induce DNA bending by a purely electrostatic mechanism. If stretching forces between DNA phosphates are significant, fixed charges should induce DNA bending by asymmetrically modulating these forces. We have previously tested this hypothesis by adding charged residues to small bZIP DNA binding peptides and monitoring DNA bending using electrophoretic phasing assays. Our results were consistent with an electrostatic model of DNA bending in predicted directions. We now confirm these observations with fluorescence resonance energy transfer (FRET). Using a "U"-shaped DNA probe, we report that DNA bending by charged bZIP peptides is readily detected by FRET. We further show that charged bZIP peptides cause DNA bending rather than DNA twisting.     

DNA-bending on ligand binding; change of DNA persistence length.

This paper simulates the helix-characteristic changes of apparent DNA persistence length caused by randomly distributed helix bends as induced, e.g., by DNA-bound ligand molecules. The parameters varied are the constant angle gamma of helix bending and the size alpha of the DNA drug binding site, but also the degree of DNA-ligand binding cooperativity and the helix-unwinding angle. If the size of the binding site is comparable with the helix pitch, the influence of phasing between helix bends and helix screw upon the apparent persistence length is obvious. In the accompanying paper experimental data are analyzed in terms of this theoretical background.     

Alternatively spliced transcripts of the Drosophila tramtrack gene encode zinc finger proteins with distinct DNA binding specificities.

A protein present in nuclear extracts of Drosophila embryos binds multiple sites in the promoter and genetically defined autoregulatory element of the pair-rule gene even-skipped (eve). We reported here the isolation of a cDNA encoding this binding activity, the sequence of which identifies it as the 69 kDa zinc finger tramtrack (ttk) protein. As ttk was previously implicated in controlling the expression of another pair-rule gene, fushi tarazu (ftz), our findings suggest that ttk plays a role in the regulation of at least two developmentally important genes. An additional ttk-related cDNA clone was isolated which gives rise to an 88 kDa protein with an alternative set of zinc fingers having a DNA binding specificity distinct from that of the 69 kDa protein. Both proteins were shown to be encoded by the ttk gene through alternative splicing, providing the first example of the use of this mechanism to generate related proteins with distinct DNA binding specificities. Whole mount in situ hybridization analysis revealed different patterns of embryonic expression of the two ttk mRNA isoforms.     

Artificial antifreeze polypeptides: alpha-helical peptides with KAAK motifs have antifreeze and ice crystal morphology modifying properties.

Antifreeze polypeptides from fish are generally thought to inhibit ice crystal growth by specific adsorption onto ice surfaces and preventing addition of water molecules to the ice lattice. Recent studies have suggested that this adsorption results from hydrogen bonding through the side chains of polar amino acids as well as hydrophobic interactions between the non-polar domains on the ice-binding side of antifreeze polypeptides and the clathrate-like surfaces of ice. In order to better understand the activity of one of the antifreeze polypeptide families, namely the alpha-helical type I antifreeze polypeptides, four alpha-helical peptides having sequences not directly analogous to those of known antifreeze polypeptides and containing only positively charged and non-polar side chains were synthesized. Two peptides with regularly spaced lysine residues, GAAKAAKAAAAAAAKAAKAAAAAAAKAAKAAGGY-NH2 and GAALKAAKAAAAAALKAAKAAAAAALKAAKAAGGY-NH2, showed antifreeze activity, albeit weaker than seen in natural antifreeze polypeptides, by the criteria of freezing point depression (thermal hysteresis) and ice crystal modification to a hexagonal trapezohedron. Peptides with irregular spacing of Lys residues were completely inactive. Up to now, lysine residues have not been generally associated with antifreeze activity, though they have been implicated in some antifreeze polypeptides. This work also shows that lysine residues in themselves, when properly positioned on an alpha-helical polyalanine scaffold, have all the requisite properties needed for such an activity.     

Thermostability of alcohol dehydrogenase: evidence for distinct subunits with different deactivation properties

Several independent experimental techniques, including nondenaturing and denaturing isoelectric focusing, spin labeling, and enzyme immobilization, indicate that four ethanol-active subunits of horse liver alcohol dehydrogenase (LADH) can be classified as one of two types, designated E(1) and E(2). Thermal inactivation studies of LADH in solution and immobilized to two different supports demonstrate that the first-order rate constants of deactivation of E(1) and E(2) differ by more than an order of magnitude. Furthermore, E(1), and E (2) can be distinguished by EPR spectroscopy, with the less stable subunit type, E(2), appearing to have the less compactly structured active-site environment. The less stable enzyme form also loses catalytic activity upon covalent attachment to CNBr-Sepharose but remains active when adsorbed to Octyl-Sepharose. Moreover, the immobilization results in conjunction with lysine modification studies suggest that E(2) immobilized to CNBr-Sepharose cannot bind coenyzme. Overall, these results illustrate how EPR measurements in concert with activity assays can pro vide insights into the molecular mechanisms of enzyme stabilization.     

pH-dependent interconvertible forms of mushroom tyrosinase with different kinetic properties

The lag in cresolase activity and inhibition by excess tyrosine of mushroom tyrosinase which was observed when assayed at pH 6.8 was found to be absent when assayed at pH 5.0. The absence of lag and inhibition by excess tyrosine of tyrosinase at pH 5.0 were brought about only after the enzyme was kept at pH 5.0, at 0-4 degrees C, for 1.5 h. The enzyme kept at pH 5.0 for 1.5-3 h at 0-4 degrees C when brought back to pH 6.8, acquires lag and inhibition by excess tyrosine when its activity was measured at pH 6.8. The pH-dependent changes in the kinetic properties of the mushroom tyrosinase are similar to the pH-dependent changes in the kinetic properties of tyrosinase from B-16 murine melanoma and human skin, and thus appear to be a general property of tyrosinase from diverse sources.     

The structure of 4-way DNA junctions: specific binding of bis-intercalators with rigid linkers.

During replication and recombination, two DNA duplexes lie side by side. We have developed reagents that might be used to probe structure during these critical processes; they contain two intercalating groups connected by a rigid linker that forces those groups to point in opposite directions. If their stereochemistry proves appropriate, such structure-specific agents should intercalate specifically into adjacent duplexes in the Y- and X-shaped structures (i.e. 3- and 4-way junctions, now known as 3H and 4H junctions) found at replication and recombination sites. We prepared DNA structures in which four duplexes were arranged in all possible combinations around 2- and 4-way junctions and then probed the accessibility to DNase I of all their phosphodiester bonds. In the absence of any bis-intercalators, 7-9 nucleotides (nt) in each of the strands in 4-way junctions were protected from attack; protected regions were significantly offset to the 3' side of the junction in continuous strands, but only slightly offset, if at all, in exchanging strands. All the intercalators decreased accessibility throughout the structure, but none did so at specific points in the two adjacent arms of 4-way junctions. However, one bis-intercalator--but not its sister with a shorter linker--strikingly increased access to a particular CpT bond that lay 9 nt away from the centre of some 4-way junctions without reducing access to neighbouring bonds. Binding was both sequence and structure specific, and depended on complementary stereochemistry between bis-intercalator and junction.     

Photodynamic activity of dyes with different DNA binding properties I. free-radical induction in DNA.

The photosensitizing efficiencies of eight dyes have been compared; two acridines, two xanthene derivatives, one sulphur-containing dye and three chemotherapeutic agents. The analysed reaction was the photosensitized induction of free radicals in calf-thymus DNA at low temperature. The binding of these dyes to DNA was first measured. Both strong (process I) and weak (process II) binding, with different intensities, either alone or together, were observed as mode of fixation. Whatever the nature of their binding, all the dyes used revealed a photosensitizing power as inducers of peroxide radicals in DNA. Their relative efficiencies, expressed as a function of the amount of dye molecules bound to DNA, were found to be very different. Intercalation, however, appeared to favour the free-radical induction as the first strongly bound molecules were more efficient.     

Synthesis and properties of pyrrolidine-based negatively charged DNA mimics

A set of novel chiral pyrrolidine-based nucleotide mimics, in which nucleobase, hydroxyl group and phosphonic acid residue were attached to different carbon atoms of the pyrrolidine ring, was synthesized. These monomers were used for the synthesis of the corresponding oligomers, and their physico-chemical properties were evaluated.     

DNA binding properties of the vitamin D3 receptor zinc finger region.

The DNA binding domains of the nuclear receptor superfamily are highly conserved and consist of residues that fold into two zinc finger-like motifs, suggesting that the structures of this region among the members of the superfamily are likely to be very similar. Furthermore, the response elements that these receptors bind to are similar in sequence and organization. Nevertheless, these receptors selectively recognize target response elements and differentially regulate linked genes. In order to study the details of receptor:DNA binding, we have overexpressed and purified the vitamin D3 receptor DNA binding domain (VDRF) and have begun characterizing its DNA binding properties. We find that the VDRF protein binds strongly and specifically to direct repeats constituting a vitamin D response element from the mouse osteopontin (Spp-1) promoter region but weakly to the human osteocalcin vitamin D response element. Unlike receptors that recognize hormone response elements oriented as inverted repeats, such as the glucocorticoid receptor (GR) and estrogen receptor, VDRF appears to bind half-sites noncooperatively, without the free energy contribution of dimerization seen when the glucocorticoid receptor DNA binding domain associates with a glucocorticoid response element. By comparing and contrasting the DNA binding properties of the vitamin D and glucocorticoid receptors, we suggest a model for how receptors that prefer direct repeats differ in their binding strategy from those that recognize inverted repeats.     

The kinetic properties of cruciform extrusion are determined by DNA base-sequence.

The extrusion kinetics of two cruciforms derived from unrelated DNA sequences differ markedly. Kinetic barriers exist for both reactions, necessitating elevated temperatures before extrusion proceeds at measureable speeds, but the dependence upon temperature and ionic strength is quite different for the two sequences. One, the ColE1 inverted repeat, exhibits a remarkably great temperature dependence of reaction rate and is suppressed by moderate amounts of NaCl or MgCl2. In contrast, the other, a synthetic inverted repeat present in pIRbke8, shows more modest temperature dependence and has a requirement for the presence of salt, with optimal concentrations being 50 mM NaCl or 100 microM MgCl2. Under optimal conditions, cruciform extrusion rates are fast (t1/2 less than 60m) at 37 degrees C for both sequences at native superhelix densities. In 50 mM NaCl the pIRbke8 inverted repeat is characterised by an Arrhenius activation energy of 42.4 +/- 3.2 kcal mole -1. The differences in kinetic properties between the two sequences indicate that DNA base sequence is itself an important factor in determining cruciform kinetics, and possibly even in the selection of the mechanistic pathway.