Immobilization of immunoglobulins on silica surfaces. Stability.

The development of new immunosensors based on surface-concentration-measuring devices requires a stable and reproducible immobilization of antibodies on well-characterized solid surfaces. We here report on the immobilization of immunoglobulin G (IgG) on chemically modified silica surfaces. Such surfaces may be used in various surface-oriented analytical methods. Reactive groups were introduced to the silica surfaces by chemical-vapour deposition of silane. The surfaces were characterized by ellipsometry, contact-angle measurements and scanning electron microscopy. IgG covalently bound by the use of thiol-disulphide exchange reactions, thereby controlling the maximum number of covalent bonds to the surface, was compared with IgG adsorbed on various silica surfaces. This comparison showed that the covalently bound IgG has a superior stability when the pH was lowered or incubation with detergents, urea or ethylene glycol was carried out. The result was evaluated by ellipsometry, an optical technique that renders possible the quantification of amounts of immobilized IgG. The results outline the possibilities of obtaining a controlled covalent binding of biomolecules to solid surfaces with an optimal stability and biological activity of the immobilized molecules.     

抗体固定化方法研究进展

在免疫分析和生物芯片中,抗原-抗体特异性结合被广泛应用,其中抗体的固定化是研发高效诊断和分离工具的关键环节。生物分子工程、材料化学与交联剂化学的进步极大地促进了抗体固定化技术的发展。 抗体可以通过物理吸附、共价偶联和亲和相互作用固定到不同类型的固相表面。 抗体固定化的目标是以一种正确的空间取向将抗体固定到固相表面,在完全保留抗体构象和活性的同时最大化抗原的结合能力,这对固相化抗体的分析性能至关重要。 对固定抗体到固相载体表面的各种最新方法进行了阐述,包括物理吸附法,通过羧基、氨基、巯基、糖基和点击化学的共价结合法以及基于生物亲和作用的固定法,并对固定化抗体的表征方法进行了归纳,最后对抗体固定化方法的发展方向进行了展望。     

Development of sensors for direct detection of organophosphates. Part I: Immobilization, characterization and stabilization of acetylcholinesterase and organophosphate hydrolase on silica supports

Biosensors for organophosphates in solution may be constructed by monitoring the activity of acetylcholinesterase (AChE) or organophosphate hydrolase (OPH) immobilized to a variety of microsensor platforms. The area available for enzyme immobilization is small (< 1 mm2) for microsensors. In order to construct microsensors with increased surface area for enzyme immobilization, we used a sol-gel process to create highly porous and stable silica matrices. Surface porosity of sol-gel coated surfaces was characterized using scanning electron microscopy; pore structure was found to be very similar to that of commercially available porous silica supports. Based upon this analysis, porous and non-porous silica beads were used as model substrates of sol-gel coated and uncoated sensor surfaces. Two different covalent chemistries were used to immobilize AChE and OPH to these porous and non-porous silica beads. The first chemistry used amine-silanization of silica followed by enzyme attachment using the homobifunctional linker glutaraldehyde. The second chemistry used sulfhydryl-silanization followed by enzyme attachment using the heterobifunctional linker N-gamma-maleimidobutyryloxy succinimide ester (GMBS). Surfaces were characterized in terms of total enzyme immobilized, total and specific enzyme activity, and long term stability of enzyme activity. Amine derivitization followed by glutaraldehyde linking yielded supports with greater amounts of immobilized enzyme and activity. Use of porous supports not only yielded greater amounts of immobilized enzyme and activity, but also significantly improved long term stability of enzyme activity. Enzyme was also immobilized to sol-gel coated glass slides. The mass of immobilized enzyme increased linearly with thickness of coating. However, immobilized enzyme activity saturated at a porous silica thickness of approximately 800 nm.     

Versatility of glutaraldehyde to immobilize lipases: Effect of the immobilization protocol on the properties of lipase B from Candida antarctica

Glutaraldehyde chemistry has been used to immobilize lipase B from Candida antarctica (CALB) under different situations. Using high ionic strength, ionic adsorption is avoided, but CALB is adsorbed on the support via interfacial activation. Using non-ionic detergents (e.g., Triton X-100), the enzyme becomes ionically adsorbed on the activated support. If detergent and salt are simultaneously present during immobilization, a covalent attachment to the support is first produced. In absence of detergent or high ionic strength, a mixture of all of the previous immobilization reasons should coexist. Thus, 5 different CALB biocatalysts were prepared following the previous described protocols, and its stability and activity, pH/activity profile and specificity versus R and S methyl mandelate were analyzed. The existence of covalent attachment of more than 95% of the enzyme molecules was confirmed by washing the biocatalysts in salt and detergent solutions. The glutaraldehyde treatment of the enzyme adsorbed on aminated supports did not produce a significant improvement on the activity of the enzyme versus p-nitrophenylpropinate (pNPB) nor a high stabilization of the enzyme. This differed from the effects of a similar treatment of CAL adsorbed on octyl agarose. However, they were similar to the effects of this treatment on covalently immobilized CALB, suggesting that the immobilization protocol may greatly affect the final effect of a chemical modification on the enzyme properties.Dramatic changes in the enzyme features were observed comparing the different preparations, mainly in the specificity of CALB versus p-NPB and R-methyl mandelate (from 2.5 to 20), or in the enantiospecificity versus R/S methyl mandelate (from 1.8 to 16), confirming that these different immobilization protocols produced biocatalysts with different features. Moreover, changes in experimental conditions produced very different effects on the properties of the different CALB preparations.     

Preparation of inert magnetic nano-particles for the directed immobilization of antibodies

Various activated supports (cyanogen bromide, glutaraldehyde, epoxy-chelates, primary amino) were evaluated for the immobilization of IgG anti-horseradish peroxidase. Cyanogen bromide and glutaraldehyde supports greatly reduced the recognition capacity of the antigen, probably due to the incorrect orientation of the antibody on the support. Hetero-functional epoxy-chelate and immobilization by the sugar chain on primary amino groups had little effect on high recognition of the antigen (near to the theoretically expected value). However, the immobilization by the sugar chain resulted in a higher adsorption rate of horseradish peroxidase, possibly due to a favourable orientation on a flexible spacer arm). Antibodies immobilized on aminated surfaces showed two major drawbacks. Firstly, the biological activity of the immobilized antibody sharply decreased over several days when stored at low ionic strength, although this effect could be partially reversed by incubation at high ionic strength. Secondly, a high level of non-specific proteins adsorption on the support surface was observed. Both problems could be successfully resolved by controlling the coating of the support with aldehyde-aspartic-dextran. We propose that the loss of biological activity was related to the ionic adsorption of the immobilized antibody on the support surface, leading to a blocking of the recognition areas. This optimized protocol was applied to the immobilization of IgG anti-horseradish peroxidase from rabbit on magnetic nano-particles. A 10 microg preparation of nano-particles was able to capture more than 75% of the 0.1 microgram of recombinant horseradish peroxidase present in 10 L of crude protein extract (1g/L) from Escherichia coli.     

Immobilization of native and dextran-free dextransucrases from Leuconostoc mesenteroides NRRL B-512F for the synthesis of glucooligosaccharides

Dextransucrase from Leuconostoc mesenteroides NRRL B-512F was immobilized using two different methods: covalent attachment to activated silica and entrapment in calcium alginate. For immobilization on silica, native enzyme and dextran-free enzyme were compared. However, the entrapment in calcium alginate beads gave the best results in terms of immobilization yield and stability. This biocatalyst was employed in the acceptor reaction with maltose showing similar glucooligosaccharide production than the native enzyme but increased operational stability.     

Enhancing the catalytic properties of porcine pancreatic lipase by immobilization on SBA-15 modified by functionalized ionic liquid

The mesoporous silica SBA-15 was modified by carboxyl-functionalized ionic liquid (COOH-IL-SBA). The prepared support was used to immobilize porcine pancreatic lipase (PPL) by physical adsorption (PPL-COOH-IL-SBA) and covalent attachment (PPL-CON-IL-SBA). Enzymatic properties of the immobilized PPL were investigated in the triacetin hydrolysis reaction. It was found that carboxyl functionalized ionic liquid modification of the support surface was an effective method to improve the properties of immobilized PPL. Incorporating into the functionalized SBA-15 made PPL more resistant to temperature and pH changes, compared with PPL immobilized on parent SBA-15 (PPL-SBA). Especially, after the covalent attachment to a functionalized support, the stability of PPL was improved obviously, which retained 81.25% and 52.50% of the original activity after incubation for 20 days and four times recycling, respectively, whereas PPL-SBA exhibited only 58.80% and 27.78% of the original activity under the same conditions. In addition, physical and chemical properties of the supports and immobilized PPL were characterized by small-angle X-ray powder diffraction (SAXRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), nitrogen adsorption, nuclear magnetic resonance (NMR) and thermogravimetry (TG). The images and data confirmed chemical modification in SBA-15 and PPL immobilization on the tested support.     

A streptavidin mutant useful for directed immobilization on solid surfaces.

A streptavidin mutant has been designed and produced that allows the specific, covalent immobilization of streptavidin on solid surfaces. This streptavidin mutant was constructed by fusing a six-residue sequence, containing a single cysteine, to the carboxyl terminus of streptavidin. Because this mutant has no other cysteine residues, the reactive sulfhydryl group of the cysteine residue serves as a unique immobilization site for conjugation using sulfhydryl chemistry. This streptavidin mutant was efficiently immobilized on maleimide-coated solid surfaces via its unique immobilization site. Characterization of the immobilized streptavidin mutant for the ability to bind to biotinylated macromolecules and the dissociation rates of bound biotin showed that the biotin-binding properties of this mutant were minimally affected by immobilization on solid surfaces. This streptavidin could be readily incorporated into a wide variety of solid-phase diagnostic tests and biomedical assays. This could enhance the performance of streptavidin-based solid-phase assay systems.     

Use of thiol-terminal silanes and heterobifunctional crosslinkers for immobilization of antibodies on silica surfaces

A procedure for covalent immobilization of functional proteins on silica substrates was developed using thiol-terminal silanes and heterobifunctional cross-linkers. Using this procedure, a high density of functional antibodies was bound to glass cover slips and silica fibers. The amount of anti-IgG antibody immobilized was determined to be in the range of 0.66 to 0.96 ng/mm2 using radiolabeled antibody. The relative amount of IgG antigen bound by the immobilized antibody (0.37 to 0.55 mol antigen/mol antibody) was three to five times greater than other investigators have reported. In addition, the amount of protein nonspecifically adsorbed to the antibody-coated surface was further reduced by the addition of blocking agents so that nonspecific adsorption of protein antigens represented only 2-6% of the total antigen binding. With this low background, IgG antigen binding could be measured at levels as low as 150 fmol when an antigen concentration of 3 pmol/ml was applied. The process for antibody immobilization is straightforward, easy to perform, and adaptable for modifying mass quantities of biosensor components.     

Immobilized lipase on porous silica particles: Preparation and application for biodegradable polymer syntheses in ionic liquid at higher temperature

Porous silica particles (PSP) modified with different surface active groups were prepared for covalent immobilization of porcine pancreas lipase (PPL). Organosilanes combined with reactive end amino-group or epoxy-group were employed for the modification through silanization process. Polyethylenimine and long chain alkyl silane coupling agent were also used in the modification process. Several modification-immobilization strategies were performed, while good coupling yield could be achieved within the range of 86.2–158.2 mg of native PPL per gram of the carrier. Furthermore, at higher temperature, the resulting immobilized PPL (IPPL) could successfully perform the syntheses of polycaprolactone (PCL) and poly(5,5-dimethyl-1,3-dioxan-2-one) (PDTC) in ionic liquid medium. No polymers could be obtained catalyzed by native PPL, suggesting that IPPL showed much higher catalytic activity than native PPL. Effect of different treatments on the activity of IPPL also showed the long time high temperature stability in ionic liquid medium, contributing to a good combination of immobilization and ionic liquids effect. The catalytic activity of IPPL for polymerization was closely related to both the properties of immobilized enzyme and cyclic monomer. This work would be expected to highlight further careful design of immobilized enzyme for a wide range of application, especially in biodegradable polymers syntheses.     

Immobilization of lipases on hydrophobic supports involves the open form of the enzyme

The lipases from Thermomyces lanuginosus and Pseudomonas cepacia have been immobilized on octyl and cyanogen bromide (CNBr) agarose beads. The immobilization on octyl-agarose is slowed with increasing ionic strength, while the immobilization on CNBr is not significantly affected by the ionic strength. The inhibition of the immobilized preparations with diethyl p-nitrophenylphosphate (D-pNPP) was analyzed. The inhibition was more rapid using octyl-lipase preparations than using covalent preparations, and the covalent preparations were much more sensitive to the reaction medium. The addition of detergent increased the inhibition rate of the covalent preparation while an increase on the ionic strength produced a slowdown of the inhibition rate by D-pNPP for both lipases. The effect of the medium on the activity versus fully soluble substrate (methyl mandelate) was in the same direction. The octyl preparations presented a slight decrease in activity when comparing the results using different concentrations of sodium phosphate buffer (between 0.025 and 1 M), while the CNBr preparations suffered drastic drops in its activity at high ionic strength.The results confirm that the lipases immobilized on octyl agarose presented their open form stabilized while the covalent preparation maintains a closing/opening equilibrium that may be modulated by altering the medium.     

Enzyme immobilization on electrospun polymer nanofibers: An overview

Enzyme immobilization has attracted continuous attention in the fields of fine chemistry, biomedicine, and biosensor. The performance of immobilized enzyme largely depends on the structure of supports. Nanostructured supports are believed to be able to retain the catalytic activity as well as ensure the immobilization efficiency of enzyme to a high extent. Electrospinning provides a simple and versatile method to fabricate nanofibrous supports. Compared with other nanostructured supports (e.g. mesoporous silica, nanoparticles), nanofibrous supports show many advantages for their high porosity and interconnectivity. This review mainly discusses the recent advances in using nanofibers as hosts for enzyme immobilization by two different methods, surface attachment and encapsulation. Surface attachment refers to physical adsorption or covalent attachment of enzymes on pristine or modified nanofibrous supports, and encapsulation means electrospinning a mixture of enzyme and polymer. We make a detailed comparison between these two immobilization approaches and highlight their distinct characteristics. The prospective applications of enzyme immobilized electrospun nanofibers in the development of biosensors, biofuel cells and biocatalysts are also discussed.     

Probing fundamental film parameters of immobilized enzymes--towards enhanced biosensor performance. Part I--QCM-D mass and rheological measurements

Enzyme immobilization is an ever-growing research-area for both analytical and industrial applications. Of critical importance in this area are the effects of immobilization procedures upon the functionality of the immobilized biomolecules. Both beneficial and detrimental effects can be conferred through the selection and tuning of the immobilization procedure. Quartz-crystal microbalance with dissipation (QCM-D) has been previously used to great effect in tracking alterations to thin films of biomolecules immobilized onto quartz transducers.In this study, we investigate the ability of QCM-D to track and monitor film parameters of a monolayer of laccase immobilized on a series of self-assembled monolayers (SAMs), differing in lateral density of binding residues on the SAM and height of the SAM from the quartz surface. Both mass gains and rheological parameters for these varying surfaces were measured and trends later compared to the apparent enzyme kinetics of the immobilized laccase films, assessed electroanalytically (Paper II in this two part study). For covalent attachment of proteins, both shear and viscosity were increased relative to physically adsorbed proteins. An increase in lateral density of protein-binding surface of the SAM components was shown to increase the shear/viscosity of the resultant film while an increase in distance from the electrode (through incorporation of lysine linkers) was shown to decrease the shear/viscosity while simultaneously increasing the wet mass gain of the films. Shear and viscosity may be indicative of both enzyme denaturation and increased lateral protein packing within the film structure hence it is assumed that less distortion occurs with the inclusion of linkers which allow for more optimal protein immobilization.     

Structural transitions of soluble and immobilized chymotrypsinogen A in urea and guanidinium chloride as measured by fluorescence

A cylindrical flow-through quartz cell was designed for measuring fluorescence changes associated with structural transitions in proteins immobilized by covalent attachment to insoluble matrices. Chymotrypsinogen A was immobilized by covalent attachment to derivatized porous glass beads. Conformational transitions in both native, soluble chymotrypsinogen and glass-bound chymotrypsinogen were assessed from fluorescence emission spectra obtained in 0 to 8 m urea and in 0 to 7 m guanidinium chloride. Evidence for the complete reversibility of such transitions in this zymogen was provided by comparing spectra generated by the native zymogen exposed to a given concentration of denaturant with spectra recorded for a mixture of the native zymogen and completely denatured zymogen at the same final concentration of denaturant. The observed transition appeared to follow a two-state mechanism. First order kinetics of unfolding and of refolding were observed in the transition region of the immobilized protein by monitoring fluorescence changes after rapidly adjusting the concentration of denaturant; apparent first order rate constants at pH 7 and 25 °C averaged 0.016 min^?1. Neither the chemistry of the immobilization reactions nor the microenvironment of the surface appears to affect the stability of the native zymogen or the refolding of denatured chymotrypsinogen. Thus, it appears that immobilization of proteins can provide a means for investigating conformational transitions which, due to such complicating secondary reactions as protein-protein interactions and autolysis, cannot otherwise be examined.     

Sunlight-mediated activation of an inert polymer surface for covalent immobilization of a protein

Polystyrene, polypropylene, and polyethylene surfaces were activated by exposing 1-fluoro-2-nitro-4-azidobenzene coated surface to sunlight. Sunlight intensity of 26,300 lux was found optimum beyond which no appreciable increase in activation was observed. Five-minutes sunlight exposure gave better activated surface than 5 min 365-nm UV light exposure. The efficacy of sunlight-mediated activated surfaces was demonstrated by covalently immobilizing proteins onto them. Horseradish peroxidase when immobilized onto the sunlight-activated surfaces showed more than twofold increase in immobilization than the surface without activation. Thus, sunlight being a versatile, eco-friendly, and clean energy source can be a potential alternative for activation of inert surface for covalent attachment of biomolecule such as protein, DNA, or carbohydrate.     

Optimization of methods of immobilization of anti-immunoglobulins. Equilibrium parameters of the interaction of immobilized antibodies with an antigen

Methods for immobilization of anti-immunoglobulins on insoluble supports were optimized, and the interaction of immunoadsorbents obtained with [125I]-labeled rabbit IgG was investigated. It was shown that this interaction can be adequately described by a rather simple equilibrium model which reflects the interaction of a monovalent antigen with two independent types of binding sites. Within the framework of this model the association constants as well as the concentrations of high affinity binding sites which influence the capacity and efficiency of the separation system were determined. Optimization of the immobilization methods implicated a study on the role of certain functional groups of the antibody involved in the formation of covalent bonds, on the effect of the spacer arm length on the properties of immobilized antibody as well as on the role of the degree of immobilization. It was found that immunoadsorbents obtained after antibody immobilization via lysine or tyrosine residues on matrices with a specific spacer group are the optimal ones.     

原位椭圆偏振术研究牛血清清蛋白在固/液界面的吸附

用原位椭圆偏振术系统研究了硅片表面因素及缓冲液环境因素对牛血清清蛋白在固/液界面吸附的影响。在生理条件下,疏水表面与亲水表面相比BSA吸附量较大。随着硅片表面电荷密度增加,BSA吸附量增加。BSA吸附量当体溶液pH值等于BSA等电点时达到最大。而随着体溶液离子强度增加,BSA吸附量亦上升。实验结果提示:除了熵驱动作用之外,硅片表面与BSA分子及BSA分子之间的静电作用在BSA吸附中起着十分重要的作用。     

Immobilization of enzymes on heterofunctional epoxy supports

Immobilization of enzymes and proteins on activated supports permits the simplification of the reactor design and may be used to improve some enzyme properties. In this sense, supports containing epoxy groups seem to be useful to generate very intense multipoint covalent attachment with different nucleophiles placed on the surface of enzyme molecules (e.g., amino, thiol, hydroxyl groups). However, the intermolecular reaction between epoxy groups and soluble enzymes is extremely slow. To solve this problem, we have designed "tailor-made" heterofunctional epoxy supports. Using these, immobilization of enzymes is performed via a two-step process: (i) an initial physical or chemical intermolecular interaction of the enzyme surface with the new functional groups introduced on the support surface and (ii) a subsequent intense intramolecular multipoint covalent reaction between the nucleophiles of the already immobilized enzyme and the epoxy groups of the supports. The first immobilization may involve different enzyme regions, which will be further rigidified by multipoint covalent attachment. The design of some heterofunctional epoxy supports and the performance of the immobilization protocols are described here. The whole protocol to have an immobilized and stabilized enzyme could take from 3 days to 1 week.     

Improvement of enzymatic performance of Asclepias curassavica L. proteases by immobilization. Application to the synthesis of an antihypertensive peptide

The aim of this work was to study different immobilization strategies on silica supports in order to obtain robust biocatalysts from latex proteases of Asclepias curassavica L., a South American native plant. Immobilized enzyme performance was evaluated under harsh reaction conditions such as the synthesis of the antihypertensive peptide N-α-CBZ-Val-Gly-OH.Proteases from A. curassavica, named asclepain, were immobilized (0.51–5.56 mg of protein/ g of support) in non-functionalized silica (S), in glyoxyl-silica (GS) and in octyl-glyoxyl-silica (OGS), by adsorption, and multi-point covalent attachment on mono and hetero-functional supports, respectively, under previously determined optimal immobilization conditions. Immobilization yields were expressed as activity yield (Y_a) and protein yield (Y_p).Asclepain-OGS showed the highest Y_a (178 ± 1.62 %) meaning an expressed activity 1.8 times higher than the offered activity, while Y_p was 75 ± 0.4 %. Y_a for asclepain-S and -GS were 64 ± 1.45 % and 16 ± 0.37 %, respectively. Best results were attributed to the ability of OGS support to guide the enzyme before covalent attachment, increasing its reactivity. Asclepain-OGS led to product yield of 95.5 ± 0.14 %, five times higher than soluble asclepain in the synthesis of N-α-CBZ-Val-Gly-OH, after 3 h in 30 % methanol in 0.1 M Tris-HCl buffer pH 8.     

Solid-phase handling of hydrophobins: immobilized hydrophobins as a new tool to study lipases

Hydrophobins are fungal proteins that self-assemble spontaneously at hydrophilic-hydrophobic interfaces and change the polar nature of the surfaces to which they attach. This attribute can be used to introduce hydrophobic foci on the surface of hydrophilic supports where hydrophobins are attached by covalent binding. In this paper, we report the binding of Pleurotus ostreatus hydrophobins to a hydrophilic matrix (agarose) to construct a support for noncovalent immobilization and activation of lipases from Candida antarctica, Humicola lanuginosa, and Pseudomonas flourescens. Lipase immobilization on agarose-bound hydrophobins proceeded at very low ionic strength and resulted in increased lipase activity and stability. The enzyme could be desorbed from the support using moderate concentrations of Triton X-100, and its enantioselectivity was similar to that of lipases interfacially immobilized on conventional hydrophobic supports. These results suggest that lipase adsorption on hydrophobins follows an "interfacial activation" mechanism; immobilization on hydrophobins offers new possibilities for lipase study and modulation and reveals a new application for fungal hydrophobins.