Characterization of lipases from Staphylococcus aureus and Staphylococcus epidermidis isolated from human facial sebaceous skin

Two staphylococcal lipases were obtained from Staphylococcus epidermidis S2 and Staphylococcus aureus S11 isolated from sebaceous areas on the skin of the human face. The molecular mass of both enzymes was estimated to be 45 kDa by SDS-PAGE. S2 lipase displayed its highest activity in the hydrolysis of olive oil at 32 degrees C and pH 8, whereas S11 lipase showed optimal activity at 31 degrees C and pH 8.5. The S2 lipase showed the property of cold-adaptation, with activation energy of 6.52 kcal/mol. In contrast, S11 lipase's activation energy, at 21 kcal/mol, was more characteristic of mesophilic lipases. S2 lipase was stable up to 45° C and within the pH range from 5 to 9, whereas S11 lipase was stable up to 50 degrees C and from pH 6 to 10. Both enzymes had high activity against tributyrin, waste soybean oil, and fish oil. Sequence analysis of the S2 lipase gene showed an open reading frame of 2,067 bp encoding a signal peptide (35 aa), a pro-peptide (267 aa), and a mature enzyme (386 aa); the S11 lipase gene, at 2,076 bp, also encoded a signal peptide (37 aa), pro-peptide (255 aa), and mature enzyme (399 aa). The two enzymes maintained amino acid sequence identity of 98-99% with other similar staphylococcal lipases. Their microbial origins and biochemical properties may make these staphylococcal lipases isolated from facial sebaceous skin suitable for use as catalysts in the cosmetic, medicinal, food, or detergent industries.     

Biochemical and molecular characterization of Staphylococcus simulans lipase.

Staphylococcus simulans strain secretes a non-induced lipase in the culture medium. Staphylococcus simulans lipase (SSL), purified to homogeneity, is a tetrameric protein (160 kDa) corresponding to the association of four lipase molecules. The 30 N-terminal amino acid residues were sequenced. This sequence is identical to the one of Staphylococcus aureus PS54 lipase (SAL PS54) and exhibits a high degree of homology with Staphylococcus aureus NCTC8530 lipase (SAL NCTC8530), Staphylococcus hyicus lipase (SHL) and Staphylococcus epidermis RP62A lipase (SEL RP62A) sequences. But the cloning and sequencing of the part of the gene encoding the mature lipase show some differences from SAL PS54 sequence, which suggest that it is a new sequence. The lipase activity was maximal at pH 8.5 and 37 degrees C. SSL is able to hydrolyze triacylglycerols without chain length specificity. A specific activity of about 1000 U/mg was measured on tributyrin or triolein as substrate at 37 degrees C and at pH 8.5 in the presence of 3 mM CaCl(2). In contrast to other staphylococcal lipases previously characterized, Ca(2+) is not required to express the activity of SSL. SSL was found to be stable between pH 4 and pH 9. The enzyme is inactivated after a few minutes when incubated at 60 degrees C. Using tripropionin as substrate, SSL does not present the interfacial activation phenomenon. In contrast to many lipases, SSL is able to hydrolyze its substrate in the presence of bile salts or amphiphilic proteins.     

Lipase of Staphylococcus hyicus: Analysis of the catalytic triad by site-directed mutagenesis

In this study the putative catalytic triad Ser-His-Asp of the Staphylococcus hyicus ssp. hyicus lipase was investigated. Putative catalytic sites determined by homology comparisons of three staphylococcal and other non-staphylococcal lipases were altered by site-directed mutagenesis. Since the mutations did not influence the secretion of the lipase, the decrease in lipase activity of the mutants strongly supports the proposed involvement of Ser369 and His600 in catalysis. Asp559 is postulated to be the third amino acid of the triad.     

Kinetic studies of Rhizopus oryzae lipase using monomolecular film technique

Rhizopus oryzae lipase (ROL) was found to be a true lipase. This enzyme presents the interfacial activation phenomenon. The N-terminal amino acid sequence of ROL was compared to those of rhizopus lipases. Purified ROL possesses the same N-terminal sequence as the mature Rhizopus niveus lipase (RNL). This sequence was found in the last 28 amino acids of the propeptide sequence derived from the cDNA of Rhizopus delemar lipase (RDL). Using the baro-stat method, we have measured the hydrolysis rate of dicaprin films by ROL as a function of surface pressure. Our results show that Rhizopus oryzae lipase is markedly stereoselective of the sn-3 position of the 2,3 enantiomer of dicaprin. Polyclonal antibodies (PAB) directed against ROL have been produced and purified by immunoaffinity. The effects of these PAB on the interfacial behavior of ROL were determined. The immunoblot analysis with polyclonal antibodies anti-ROL (PAB anti-ROL) and various lipases shows a cross-immunoreactivity between the lipase from the rhizopus family (Rhizopus delemar lipase and Rhizopus arrhizus lipase).     

Biochemical and molecular characterization of Staphylococcus xylosus lipase

The Staphylococcus xylosus strain secretes a non-induced lipase in culture medium: S. xylosus lipase (SXL). Pure SXL is a monomeric protein (43 kDa). The 23 N-terminal amino acid residues were sequenced. This sequence is identical to that of Staphylococcus simulans lipase (SSL); in addition, it exhibits a high degree of homology with Staphylococcus aureus lipase (SAL NCTC 8530) sequences. The cloning and sequencing of gene part encoding the mature lipase shows one nucleotide difference with SSL, which corresponds to the change of one residue at a position 311. The lipase activity is maximal at pH 8.2 and 45 degrees C. SXL is able to hydrolyse triacylglycerols without chain length specificity. The specific activity of about 1900 U/mg was measured using tributyrin or triolein as substrate at pH 8.2 and at 45 degrees C in the presence of 2 mM CaCl2. In contrast to some previously characterized staphylococcal lipases, Ca2+ is not required to trigger the activity of SXL. SXL was found to be stable between pH 5 and pH 8.5. The enzyme maintains 50% of its activity after a 15-min incubation at 60 degrees C. Using tripropionin or vinyl esters as substrates, SXL does not present the interfacial activation phenomenon. Unlike many lipases, SXL is able to hydrolyse its substrate in the presence of bile salts or amphiphilic proteins. SXL is a serine enzyme, which is inhibited by THL.     

Secretion of human growth hormone by the food-grade bacterium Staphylococcus carnosus requires a propeptide irrespective of the signal peptide used

Staphylococcal exoproteins can be divided into two groups. One group comprises proteins bearing only a signal peptide, the other group requires an additional propeptide for secretion. The secretion signals of the propeptide-requiring lipase from Staphylococcus hyicus (Lip) have been frequently used to produce recombinant secretory proteins in the food-grade species Staphylococcus carnosus. However, it has been unclear whether recombinant proteins can be secreted using signal peptides of staphylococcal proteins without propeptide. The human growth hormone protein (hGH) was fused to various staphylococcal secretion signals of proteins without propeptide (Seb, SceA, and SceB) and of proteins requiring a propeptide (lipase, lysostaphin, and glycerol ester hydrolase). Secretory hGH was efficiently produced by S. carnosus after fusion with any propeptide-containing secretion signal, whereas precursor proteins were retained in the cells when only a signal peptide was used. Addition of the first six amino acid residues of mature SceA to the signal peptide did also not lead to secretion of hGH. It was concluded that the properties of the mature protein domains determine whether a propeptide is required for secretion or not. The Lip propeptide could be efficiently removed from hGH after introduction of an enterokinase cleavage site between the two protein domains.     

Novel zinc-binding center and a temperature switch in the Bacillus stearothermophilus L1 lipase

The bacterial thermoalkalophilic lipases optimally hydrolyze saturated fatty acids at elevated temperatures. They also have significant sequence homology with staphylococcal lipases, and both the thermoalkalophilic and staphylococcal lipases are grouped as the lipase family I.5. We report here the first crystal structure of the lipase family I.5, the structure of a thermoalkalophilic lipase from Bacillus stearothermophilus L1 (L1 lipase) determined at 2.0-A resolution. The structure is in a closed conformation, and the active site is buried under a long lid helix. Unexpectedly, the structure exhibits a zinc-binding site in an extra domain that accounts for the larger molecular size of the family I.5 enzymes in comparison to other microbial lipases. The zinc-coordinated extra domain makes tight interactions with the loop extended from the C terminus of the lid helix, suggesting that the activation of the family I.5 lipases may be regulated by the strength of the interactions. The unusually long lid helix makes strong hydrophobic interactions with its neighbors. The structural information together with previous biochemical observations indicate that the temperature-mediated lid opening is triggered by the thermal dissociation of the hydrophobic interactions.     

Molecular Properties and Extracellular Processing of the Lipase of Staphylococcus warneri M

Staphylococcus warneri M exhibited extracellular lipase activity. By zymogram analysis of extracellular proteins, multiple bands were detected and the profiles changed depending on the bacterial growth phase. N-terminal amino acid sequences of three bands (N1-N3) were determined. From the genome library of S. warneri M whole DNA, the gene-directing lipase activity (named gehC(WM)) was cloned and characterized. The gehC(WM )gene encoded a protein (GehC(WM)), whose calculated molecular mass was 83.4 kDa, and the sequence was similar to the other staphylococcal lipases. Though two lipases have been known from S. warneri 863, GehC(WM) differs from both of them, indicating that this enzyme is the third extracellular lipase of the S. warneri strain. The N-terminal sequences of the N1-N3 polypeptides completely coincided with the deduced amino acid sequences in GehC(WM). GehC(WM) was predicted to be a prepro-protein. In vitro processing and protein sequencing suggested that pro-GehC(WM) is possibly processed by extracellular glutamyl endopeptidase, PROM. Inductively coupled plasma-atomic emission spectrometer analysis showed that purified his-tagged mature GehC(WM) possessed zinc ion. A gehC(WM) knockout mutant was constructed by insertion of an erythromycin resistance gene into the gehC(WM). Zymogram and immunoblot analyses of the gehC(WM )mutant indicated that GehC(WM) was a major extracellular lipase of S. warneri M.     

Cloning, purification and characterisation of Staphylococcus warneri lipase 2

A gene encoding an extracellular lipase was identified in Staphylococcus warneri 863. The deduced lipase is organised as a prepro-protein and has significant similarity to other staphylococcal lipases. The mature part of the lipase was expressed with an N-terminal histidine tag in Escherichia coli, purified and biochemically characterised. The results show that the purified lipase (named SWL2) combines the properties of the staphylococcal lipases characterised so far. It has both a high preference for short chain substrates and surprisingly, it also displays phospholipase activity. Homology alignment was used to analyse sequence-function relationships of the staphylococcal lipase family with the aim to identify the structural basis underlying the different properties of the staphylococcal lipases.     

Rhodococcus sp. strain CR-53 LipR, the first member of a new bacterial lipase family (family X) displaying an unusual Y-type oxyanion hole, similar to the Candida antarctica lipase clan

Bacterial lipases constitute the most important group of biocatalysts for synthetic organic chemistry. Accordingly, there is substantial interest in developing new valuable lipases. Considering the lack of information concerning the lipases of the genus Rhodococcus and taking into account the interest raised by the enzymes produced by actinomycetes, a search for putative lipase-encoding genes from Rhodococcus sp. strain CR-53 was performed. We isolated, cloned, purified, and characterized LipR, the first lipase described from the genus Rhodococcus. LipR is a mesophilic enzyme showing preference for medium-chain-length acyl groups without showing interfacial activation. It displays good long-term stability and high tolerance for the presence of ions and chemical agents in the reaction mixture. Amino acid sequence analysis of LipR revealed that it displays four unique amino acid sequence motifs that clearly separate it from any other previously described family of bacterial lipases. Using bioinformatics tools, LipR could be related only to several uncharacterized putative lipases from different bacterial origins, all of which display the four blocks of consensus amino acid sequence motifs that contribute to define a new family of bacterial lipases, namely, family X. Therefore, LipR is the first characterized member of the new bacterial lipase family X. Further confirmation of this new family of lipases was performed after cloning Burkholderia cenocepacia putative lipase, bearing the same conserved motifs and clustering in family X. Interestingly, all lipases grouping in the new bacterial lipase family X display a Y-type oxyanion hole, a motif conserved in the Candida antarctica lipase clan but never found among bacterial lipases. This observation contributes to confirm that LipR and its homologs belong to a new family of bacterial lipases.     

Genetic and biochemical characterization of a new extracellular lipase from Streptomyces cinnamomeus.

Streptomyces cinnamomeus Tü89 secretes a 30-kDa esterase and a 50-kDa lipase. The lipase-encoding gene, lipA, was cloned from genomic DNA into Streptomyces lividans TK23 with plasmid vector pIJ702. Two lipase-positive clones were identified; each recombinant plasmid had a 5.2-kb MboI insert that contained the complete lipA gene. The two plasmids differed in the orientation of the insert and the degree of lipolytic activity produced. The lipA gene was sequenced; lipA encodes a proprotein of 275 amino acids (29,213 Da) with a pI of 5.35. The LipA signal peptide is 30 amino acids long, and the mature lipase sequence is 245 amino acids long (26.2 kDa) and contains six cysteine residues. The conserved catalytic serine residue of LipA is in position 125. Sequence similarity of the mature lipases (29% identity, 60% similarity) was observed mainly in the N-terminal 104 amino acids with the group II Pseudomonas lipases; no similarity to the two Streptomyces lipase sequences was found. lipA was also expressed in Escherichia coli under the control of lacZ promoter. In the presence of the inducer isopropyl-beta-D-thiogalactopyranoside (IPTG), growth of the E. coli clone was severely affected, and the cells lysed in liquid medium. Lipase activity in the E. coli clone was found mainly in the pellet fraction. In sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis, three additional protein bands of 50, 29, and 27 kDa were visible. The 27-kDa protein showed lipolytic activity and represents the mature lipase; the 29- and 50-kDa forms showed no activity and very probably represent the unprocessed form and a dimeric misfolded form, respectively. For higher expression of lipA in S. lividans, the gene was cloned next to the strong aphII promoter. In contrast to the lipA-expressing E. coli clone, S. cinnamomeus and the corresponding S. lividans clone secreted only an active protein of 50 kDa. The lipase showed highest activity with C6 and C18 triglycerides; no activity was observed with phospholipids, Tween 20, or p-nitrophenylesters. Upstream of lipA and in the same orientation, an open reading frame, orfA, is found whose deduced protein sequence (519 amino acids) shows similarity to various membrane-localized transporters. Downstream of lipA and in the opposite orientation, an open reading frame, orfB (encoding a 199-amino-acid protein) is found, which shows no conspicuous sequence similarity to known proteins, other than an NAD and flavin adenine dinucleotide binding-site sequence.     

Structural basis of phospholipase activity of Staphylococcus hyicus lipase

Staphylococcus hyicus lipase differs from other bacterial lipases in its high phospholipase A1 activity. Here, we present the crystal structure of the S. hyicus lipase at 2.86 A resolution. The lipase is in an open conformation, with the active site partly covered by a neighbouring molecule. Ser124, Asp314 and His355 form the catalytic triad. The substrate-binding cavity contains two large hydrophobic acyl chain-binding pockets and a shallow and more polar third pocket that is capable of binding either a (short) fatty acid or a phospholipid head-group. A model of a phospholipid bound in the active site shows that Lys295 is at hydrogen bonding distance from the substrate's phosphate group. Residues Ser356, Glu292 and Thr294 hold the lysine in position by hydrogen bonding and electrostatic interactions. These observations explain the biochemical data showing the importance of Lys295 and Ser356 for phospholipid binding and phospholipase A1 activity.     

Influence of N- and/or C-terminal regions on activity, expression, characteristics and structure of lipase from Geobacillus sp. 95

GD-95 lipase from Geobacillus sp. strain 95 and its modified variants lacking N-terminal signal peptide and/or 10 or 20 C-terminal amino acids were successfully cloned, expressed and purified. To our knowledge, GD-95 lipase precursor (Pre-GD-95) is the first Geobacillus lipase possessing more than 80 % lipolytic activity at 5 °C. It has maximum activity at 55 °C and displays a broad pH activity range. GD-95 lipase was shown to hydrolyze p-NP dodecanoate, tricaprylin and canola oil better than other analyzed substrates. Structural and sequence alignments of bacterial lipases and GD-95 lipase revealed that the C-terminus forms an α helix, which is a conserved structure in lipases from Pseudomonas, Clostridium or Staphylococcus bacteria. This work demonstrates that 10 and 20 C-terminal amino acids of GD-95 lipase significantly affect stability and other physicochemical properties of this enzyme, which has never been reported before and can help create lipases with more specific properties for industrial application. GD-95 lipase and its modified variants GD-95-10 can be successfully applied to biofuel production, in leather and pulp industries, for the production of cosmetics or perfumes. These lipases are potential biocatalysts in processes, which require extreme conditions: low or high temperature, strongly acidic or alkaline environment and various organic solvents.     

Biochemical properties of a novel metalloprotease from Staphylococcus hyicus subsp. hyicus involved in extracellular lipase processing.

Two extracellular proteases from Staphylococcus hyicus subsp. hyicus, ShpI and ShpII, have been characterized. ShpI is a neutral metalloprotease with broad substrate specificity; the gene has been cloned and sequenced. ShpII, characterized here, is mainly produced in the late logarithmic growth phase in contrast to ShpI, which is mainly produced in the late stationary growth phase. ShpII was purified from culture medium of S. hyicus by ammonium sulfate precipitation and DEAE-Sepharose chromatography. The molecular mass, estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, was 34 kDa. The temperature optimum of ShpII was 55 degrees C, and the pH optimum was 7.4. ShpII, a neutral metalloprotease, was strongly inhibited by zinc and calcium chelators. The amino-terminal sequence of the active enzyme was similar to the corresponding region of a Staphylococcus epidermidis metalloprotease. The substrate specificity of ShpII was similar to that of thermolysin-like proteases, with the exception that ShpII also recognized aromatic amino acids. We demonstrated in vitro that ShpII, but not ShpI, cleaved the 86-kDa S. hyicus subsp. hyicus prolipase between Thr-245 and Val-246 to generate the mature 46-kDa lipase. Results of additional in vivo experiments supported the model that ShpII is necessary for the extracellular processing and maturation of S. hyicus subsp. hyicus lipase.     

Novel metagenome-derived, cold-adapted alkaline phospholipase with superior lipase activity as an intermediate between phospholipase and lipase

A novel lipolytic enzyme was isolated from a metagenomic library obtained from tidal flat sediments on the Korean west coast. Its putative functional domain, designated MPlaG, showed the highest similarity to phospholipase A from Grimontia hollisae CIP 101886, though it was screened from an emulsified tricaprylin plate. Phylogenetic analysis showed that MPlaG is far from family I.6 lipases, including Staphylococcus hyicus lipase, a unique lipase which can hydrolyze phospholipids, and is more evolutionarily related to the bacterial phospholipase A(1) family. The specific activities of MPlaG against olive oil and phosphatidylcholine were determined to be 2,957 ± 144 and 1,735 ± 147 U mg(-1), respectively, which means that MPlaG is a lipid-preferred phospholipase. Among different synthetic esters, triglycerides, and phosphatidylcholine, purified MPlaG exhibited the highest activity toward p-nitrophenyl palmitate (C(16)), tributyrin (C(4)), and 1,2-dihexanoyl-phosphatidylcholine (C(8)). Finally, MPlaG was identified as a phospholipase A(1) with lipase activity by cleavage of the sn-1 position of OPPC, interfacial activity, and triolein hydrolysis. These findings suggest that MPlaG is the first experimentally characterized phospholipase A(1) with lipase activity obtained from a metagenomic library. Our study provides an opportunity to improve our insight into the evolution of lipases and phospholipases.     

Molecular cloning and nucleotide sequence of the lipase gene from Pseudomonas fragi

The gene coding for the lipase of Pseudomonas fragi was cloned into Escherichia coli JM83 by inserting Sau3A-generated DNA fragments into the BamH I site of pUC9. The plasmid isolated, pKKO, was restriction mapped and the position of the lipase gene on the 2.0 kb insert was pinpointed by subcloning. DNA sequencing revealed that the open reading frame comprises 405 nucleotides and gives a preprotein of 135 amino acids with a predicted Mr of 14643. By comparing the putative lipase amino acid sequence with porcine pancreatic, rat lingual and Staphylococcus hyicus lipases the amino acid sequence around the reactive serine was found to be common among the types of lipase which have been reported.     

Biochemical characterization, cloning, and molecular modelling of chicken pancreatic lipase

Chicken pancreatic lipase (CPL) was purified from delipidated pancreas. Pure CPL was obtained after ammonium sulphate fractionation, then DEAE-cellulose, Sephacryl S-200 gel filtration, and FPLC Mono-Q Sepharose columns. The pure lipase is a glycosylated monomer having a molecular mass of about 50kDa. The 23 N-terminal amino acid residues of CPL were sequenced. The sequence is similar to those of avian and mammalian pancreatic lipases. CPL presents the interfacial activation phenomenon tested with tripropionin or vinyl ester. When CPL was inhibited by synthetic detergent (TX-100) or amphipathic protein (BSA), simultaneous addition of bile salts and colipase was required to restore the full CPL activity. In the absence of colipase and bile salts, CPL was unable to hydrolyse tributyrin emulsion. This enzyme can tolerate, more efficiently than HPL, the accumulation of long-chain free fatty acids at the interface when olive oil emulsion was used as substrate in the absence of bile salts and colipase. The CPL activity, under these conditions, was linear whereas that of HPL decreased rapidly. Anti-TPL polyclonal antibodies cross-reacted specifically with CPL. The gene encoding the mature CPL was cloned and sequenced. The deduced amino acid sequence of the mature lipase shows a high degree of homology with the mammalian pancreatic lipases. A 3D structure model of CPL was built using the HPL structure as template. We have concluded that a slight increase in the exposed hydrophobic residues on the surface of CPL, as compared to HPL, could be responsible for a higher tolerance to the presence of long-chain free fatty acids at the lipid/water interface.     

cDNA cloning and characterization of Geotrichum candidum lipase II

Geotrichum candidum produces two extracellular lipases, I and II. A lipase II cDNA clone was isolated from a cDNA library by colony hybridization using the 32P-labeled fragment of lipase I cDNA isolated previously. The nucleotide sequence of lipase II cDNA determined by the dideoxy chain terminating method includes the N- and C-terminal amino acid sequences of lipase II, and the overall amino acid composition deduced from the cDNA coincides with that deduced on amino acid analysis of this protein. The cloned lipase II cDNA codes a protein of 544 amino acids and a part of the signal sequence of 13 amino acids. The peptide chain lengths of lipases I and II are the same, their overall identity being 84%. Furthermore, four Cys residues are completely conserved, which may participate in the formation of disulfide bridges. A homology search indicated that the G. candidum lipases and Candida cyclindracea lipase are homologous enzymes and that they are members of the cholinesterase family.     

Biochemical and molecular characterisation of a thermoactive, alkaline and detergent-stable lipase from a newly isolated Staphylococcus aureus strain

A newly soil-isolated Staphylococcus aureus strain secretes a non-induced lipase in the culture medium. The extracellular lipase from S. aureus (SAL3) is purified to homogeneity. The purified enzyme is a tetrameric protein (180 kDa) corresponding to the association of four lipase molecules. The 15 N-terminal amino acid residues showed a high degree of homology with other staphylococcal lipase sequences. The part of the gene encoding the mature SAL3 is cloned and sequenced. The deduced polypeptide sequence, corresponding to the mature SAL3, was very similar to the mature Staphylococcus simulans lipase sequence with two additional amino acid residues (LK) at the N-terminus of SAL3. The lipase activity is maximal at pH 9.5 and 55 °C. The specific activity of about 4200 U/mg or 3500 U/mg was measured using tributyrin or olive oil emulsion as substrate, respectively, at pH 9.5 and 55 °C.In contrast to other staphylococcal lipases previously characterised, SAL3 is found to be stable between pH 5 and 12 after 24 h incubation. The enzyme retained 50% of its activity after 60 min incubation at 60 °C. This novel lipase is able to hydrolyse its substrate in presence of various oxidizing agents as well as some surfactants and some commercial detergents, then SAL3 can be considered as a good candidate for industrial and biotechnological applications.     

Cloning,characterization, and expression of cDNA encoding a lipase from Kurtzmanomyces sp. I-11

A cDNA clone of the lipase secreted by Kurtzmanomyces sp. I-11 was isolated from a cDNA library of this yeast by PCR screening using oligonucleotide primers designed on the basis of the partial amino acid sequence of the lipase. The cloned cDNA (lip1) encoded a hydrophobic protein of 484 amino acids, where the first 20 amino acids and the following 6 amino acid sequences were predicted to be the signal sequence for secretion and a pro-sequence, respectively. The deduced amino acid sequence of the Kurtzmanomyces lipase was most similar to Candida antarctica DSM 3855 lipase A (74% identity) and weakly to other lipases. The consensus pentapeptide (-Gly-X-Ser-X-Gly-) that forms a part of the interfacial lipid recognition site in lipases was conserved. A high level of lipase was produced by Pichia pastoris transformed with the lip1 cDNA, indicating that the cloned cDNA indeed encodes a lipase.