Production of viral vectors using recombinase-mediated cassette exchange

DNA viruses are often used as vectors for foreign gene expression, but large DNA region from cloned or authentic viral genomes must usually be handled to generate viral vectors. Here, we present a unique system for generating adenoviral vectors by directly substituting a gene of interest in a small transfected plasmid with a replaced gene in a replicating viral genome in Cre-expressing 293 cells using the recombinase-mediated cassette exchange (RMCE) reaction. In combination with a positive selection of the viral cis-acting packaging signal connected with the gene of interest, the purpose vector was enriched to 97.5 and 99.8% after three and four cycles of infection, respectively. Our results also showed that the mutant loxP V (previously called loxP 2272), a variant target of Cre used in the RMCE reaction, was useful as a non-compatible mutant to wild-type loxP. This method could be useful for generating not only a large number of adenovirus vectors simultaneously, but also other DNA virus vectors including helper-dependent adenovirus vector.     

Flexible pseudotyping of retrovirus using recombinase-mediated cassette exchange

Objective

Develop an engineered cell line containing two flexible gene expression systems enabling the continuous production of tailor-made recombinant gammaretrovirus with predictable productivities through targeted integration.

Results

Dual-FLEX cells (dFLEX) contain two independent recombinase-mediated cassette exchange (RMCE) systems which confer flexibility to the expression of different transgene and envelope combinations. The flexible envelope expression in dFLEX cells was validated by pseudotyping retrovirus particles with three different viral envelope proteins—GaLV, 4070A and VSV-G. Our results show that dFLEX cells are able to provide high titers of infectious retroviral particles with a single-copy integration of the envelope constructs after RMCE. The integrated CRE/Lox tagging cassette was amenable to express envelope proteins both using constitutive (i.e. CMV) and inducible (i.e. Tet-on) promoters.

Conclusions

dFLEX cell line provides predictable productivities of recombinant retrovirus pseudotyped with different envelope proteins broadening the tropism of particles that can be generated and thus accelerating the research and development of retrovirus-based products.

     

Efficient recombinase-mediated cassette exchange at the AAVS1 locus in human embryonic stem cells using baculoviral vectors

Insertion of a transgene into a defined genomic locus in human embryonic stem cells (hESCs) is crucial in preventing random integration-induced insertional mutagenesis, and can possibly enable persistent transgene expression during hESC expansion and in their differentiated progenies. Here, we employed homologous recombination in hESCs to introduce heterospecific loxP sites into the AAVS1 locus, a site with an open chromatin structure that allows averting transgene silencing phenomena. We then performed Cre recombinase mediated cassette exchange using baculoviral vectors to insert a transgene into the modified AAVS1 locus. Targeting efficiency in the master hESC line with the loxP-docking sites was up to 100%. Expression of the inserted transgene lasted for at least 20 passages during hESC expansion and was retained in differentiated cells derived from the genetically modified hESCs. Thus, this study demonstrates the feasibility of genetic manipulation at the AAVS1 locus with homologous recombination and using viral transduction in hESCs to facilitate recombinase-mediated cassette exchange. The method developed will be useful for repeated gene targeting at a defined locus of the hESC genome.     

Expression of a transgene exchanged by the recombinase-mediated cassette exchange (RMCE) method in plants

We developed a site-directed integration (SDI) system for Agrobacterium-mediated transformation to precisely integrate a single copy of a desired gene into a predefined target locus by recombinase-mediated cassette exchange (RMCE). We produced site-specific transgenic tobacco plants from four target lines and examined expression of the transgene in T1 site-specific transgenic tobacco plants, which were obtained by backcrossing. We found that site-specific transgenic plants from the same target lines showed approximately the same level of expression of the transgene. Moreover, we demonstrated that site-specific transgenic plants showed much less variability of transgene expression than random-integration transgenic plants. Interestingly, transgenes in the same direction at the same target locus showed the same level of activity, but transgenes in different directions showed different levels of activity. The expression levels of transgene did not correlate with those of the target gene. Our results showed that the SDI system could benefit the precise comparisons between different gene constructs, the characterization of different chromosomal regions and the cost-effective screening of reliable transgenic plants.     

A polymerase chain reaction-based method for isolation of gene-specific sequences from the interferon-alpha gene cluster.

The interferon-alpha gene is a gene family of over 20 distinct genes having 80-95% homology with one another at a nucleotide level. Because of the high homology in the gene cluster, the available interferon-alpha gene probes can hybridize to multiple bands of different size on Southern blot analysis of restricted human genomic DNA. We used the polymerase chain reaction with the primers synthesized from Alu repetitive sequence and the conserved sequences of the interferon-alpha gene cluster to generate specific probes for individual interferon-alpha genes. The amplification products were subcloned into a plasmid vector and analyzed by DNA sequencing and Southern blotting of the restricted human placental DNA. One clone, which derived from interferon-alpha 14 gene, produced a single 5.2-kb band in Southern blots of the HindIII-restricted human placental DNA. This stands in contrast to the 10 bands of different size that were detected with a cDNA for the interferon-alpha I' gene. Our results indicate that a polymerase chain reaction-based method can be used to isolate gene-specific sequences from the interferon-alpha gene cluster. Since a variety of human cancers has been found to have the complete or partial deletion of the interferon-alpha gene cluster, the gene-specific probe generated by this method may aid in determining the breakpoints in the vicinity of the gene cluster.     

A polymerase chain reaction-based method to detect cisplatin adducts in specific genes.

Every bulky lesion in DNA can potentially inhibit the Taq DNA polymerase and thereby decrease the amplification produced in the polymerase chain reaction. We investigated the feasibility of using this inhibition to quantify DNA lesions produced by the anticancer drug cisplatin. Products were detected by electrophoresis followed by ethidium bromide staining. Quantitation was obtained by including [32P]dCTP in the amplification reaction and subsequently assessing the incorporated radioactivity. Hamster genomic DNA was platinated in vitro to defined levels and amplified with primers that produce either a 150, 750 or 2,000 base pair fragment. The degree of inhibition of PCR agreed with the predicted level of DNA platination in each size of fragment, suggesting that the polymerase was inhibited by every cisplatin-induced lesion. This method was used to detect cisplatin-induced lesions in the adenine phosphoribosyltransferase gene of CHO cells. Cells were incubated with 0-125 microM cisplatin for 2 h, the DNA was purified and subjected to PCR. A significant decrease in amplification of the 2 kbp fragment was observed in DNA from cells incubated with cisplatin at 75 microM. The degree of inhibition agreed closely with the amount of DNA damage in the overall genome as measured by atomic absorption. No change was detected in amplification of the 150 base fragment which can therefore be used to normalize data for any variations between DNA samples. This assay has the same sensitivity as other methods currently used for the analysis of gene-specific damage. The advantage of this assay is that it obviates the need for specific endonuclease complexes to recognize and cleave DNA adducts as previously required when analyzing damage in specific genomic sequences.     

A hybrid-specific, polymerase chain reaction-based amplification approach for chromosomal walking

Here we report the development of an accurate and efficient genome walking approach based on ligation-mediated polymerase chain reaction (PCR) and magnetic capture hybrid selection technique. This approach overcomes the nonspecific amplification products that often occur in similar PCR-based methods. Our strategy was successfully applied for the cloning of the promoter region of the Cc RNase gene. This rapid, cost-effective, and sensitive protocol can easily be extended for use in the isolation and amplification of any target sequences for which only partial information is known such as identification of the position of transposable elements and integrated viral DNA sequences.     

A simple method for site-directed mutagenesis using the polymerase chain reaction.

We have developed a general and simple method for directing specific sequence changes in a plasmid using primed amplification by the polymerase chain reaction (PCR). The method is based on the amplification of the entire plasmid using primers that include the desired changes. The method is rapid, simple in its execution, and requires only minute amounts of plasmid template DNA. It is significant that there are no special requirements for appropriately placed restriction sites in the sequence to be manipulated. In our system the yield of transformants was high and the fraction of them harboring plasmids with only the desired change was consistently about 80%. The generality of the method should make it useful for the direct alteration of most cloned genes. The only limitation may be the total length of the plasmid to be manipulated. During the study we found that the Taq DNA polymerase used for PCR adds on a single extra base (usually an A) at the end of a large fraction of the newly synthesized chains. These had to be removed by the Klenow fragment of DNA polymerase to insure restoration of the gene sequence.     

High efficiency of a sequential recombinase-mediated cassette exchange reaction in Escherichia coli

A comparison between the efficiency of recombinase-mediated cassette exchange (RMCE) reactions catalyzed in Escherichia coli by the site-specific recombinases Flp of yeast and Int of coliphage HK022 has revealed that an Flp-catalyzed RMCE reaction is more efficient than an Int-HK022 catalyzed reaction. In contrast, an RMCE reaction with 1 pair of frt sites and 1 pair of att sites catalyzed in the presence of both recombinases is very inefficient. However, the same reaction catalyzed by each recombinase individually supplied in a sequential order is very efficient, regardless of the order. Atomic force microscopy images of Flp with its DNA substrates show that only 1 pair of recombination sites forms a synaptic complex with the recombinase. The results suggest that the RMCE reaction is sequential.     

Development of polymerase chain reaction-based assays for bacterial gene detection

Polymerase chain reaction-based assays provide rapid, simple, and sensitive detection of bacterial genes, but are not without their drawbacks. This review summarizes the principal advantages and disadvantages of PCR-based bacterial gene detection, provides guidelines for the development and validation of new PCR assays, and describes potential pitfalls that may be encountered and how these can be avoided.     

A noncommercial polymerase chain reaction-based method to approach one hundred percent recombinant clone selection efficiency

Molecular cloning is an important procedure in molecular biology, but this is often a rate-limiting step and can be very time-consuming, possibly due to low ligation efficiency. Here, we describe a simple polymerase chain reaction (PCR)-based strategy to approach 100% selection efficiency. The post-ligation mixture containing the recombinant was subjected to insert-specific primer-mediated PCR amplification using a high-fidelity DNA Pfu polymerase generating a plasmid containing staggered nicks. The PCR mixture was then digested with endonuclease DpnI, which digests the methylated and hemimethylated parental DNA template. The nicked vector was transformed into XL1 blue supercompetent cells where the nicks were repaired, thus amplifying and selecting only the newly amplified recombinant clones.     

Construction of tandem repeats of DNA fragments by a polymerase chain reaction-based method

We describe a new application of megaprimer polymerase chain reaction (PCR) for constructing a tandemly repeated DNA sequence using the drought responsive element (DRE) from Arabidopsis thaliana as an example. The key feature in the procedure was PCR primers with partial complementarity but differing melting temperatures (T(m)). The reverse primer had a higher T(m), a 3' end complementary to the DRE sequence and a 5' region complementary to the forward primer. The initial cycles of the PCR were conducted at a lower primer annealing temperature to generate products that served as megaprimers in the later cycles conducted at a higher temperature to prevent annealing of the forward primer. The region of overlap between the megaprimers was extended for generating products with a variable copy number (one to four copies) of tandem DRE sequence repeats (71?bp). The PCR product with four tandem repeats (4× DRE) was used as a template to generate tandem repeats with higher copies (copy number large than four) or demonstrated to bind DRE-binding protein in an yeast one-hybrid assay using promotorless reporter genes (HIS and lacZ). This PCR protocol has numerous applications for generating DNA fragments of repeated sequences.     

A simple and fast method for cloning and analyzing polymerase chain reaction products

A method describing a fast and efficient way for cloning polymerase chain reaction (PCR) products is presented that involves end repair and purification of the PCR product, followed by kinasing and ligation to the vector with the use of a temperature gradient. Efficiency of ligation was estimated to be 50%–70%. Following transformation, cells are plated on MacConkey agar. Bacteria from selected colonies are used directly from the plates for screening without any subsequent purification. Using this protocol, PCR products can be efficiently cloned quickly and economically.     

A real-time polymerase chain reaction-based method for rapid and specific detection of spoilage Alicyclobacillus spp. in apple juice

AIMS: To develop a real-time PCR-based rapid detection method for spoilage Alicyclobacillus spp. in juice products. METHODS AND RESULTS: The squalene-hopene cyclase-encoding gene was targeted for primer-and-probe development. Gene fragments from representative strains were cloned, and PCR primers and probe were designed by DNA sequence comparison. Selected bacteria were examined for cross-reactivity by the new method. Cells were serially diluted in apple juice and saline, and examined by the new method to establish detection sensitivity. Using the newly developed Taqman real-time PCR-based method, strains of Alicyclobacillus acidocaldarius and A. acidoterrestris were detected without cross reactivity with other common food-borne micro-organisms. Detection of <10 cells per PCR reaction from juice samples was accomplished within 3-5 h. CONCLUSION: This is the first reported real-time PCR-based detection method for Alicyclobacillus spp. and its application in juice products is demonstrated. SIGNIFICANCE AND IMPACT OF THE STUDY: As a favourable alternative for the laborious and time-consuming culture- or biochemical characterization-based techniques, the system has great potential for industrial applications from raw material screening to final product quality control.