Au-nanoclusters incorporated 3-amino-5-mercapto-1,2,4-triazole film modified electrode for the simultaneous determination of ascorbic acid, dopamine, uric acid and nitrite

A novel biosensor has been constructed by the electrodeposition of Au-nanoclusters (nano-Au) on poly(3-amino-5-mercapto-1,2,4-triazole) (p-TA) film modified glassy carbon electrode (GCE) and employed for the simultaneous determination of dopamine (DA), ascorbic acid (AA), uric acid (UA) and nitrite (NO₂⁻). NH₂ and SH groups exposed to the p-TA layer are helpful for the electrodeposition of nano-Au. The combination of nano-Au and p-TA endow the biosensor with large surface area, good biological compatibility, electricity and stability, high selectivity and sensitivity and flexible and controllable electrodeposition process. In the fourfold co-existence system, the linear calibration plots for AA, DA, UA and NO₂⁻ were obtained over the range of 2.1–50.1 μM, 0.6–340.0 μM, 1.6–110.0 μM and 15.9–277.0 μM with detection limits of 1.1 × 10⁻⁶ M, 5.0 × 10⁻⁸ M, 8.0 × 10⁻⁸ M and 8.9 × 10⁻⁷ M, respectively. In addition, the modified biosensor was applied to the determination of AA, DA, UA and NO₂⁻ in urine and serum samples by using standard adding method with satisfactory results.     

Determination of uric acid in human urine and serum by capillary electrophoresis with chemiluminescence detection

A simple and sensitive method based on capillary electrophoresis (CE) with chemiluminescence (CL) detection has been developed for the determination of uric acid (UA). The sensitive detection was based on the enhancement effect of UA on the CL reaction between luminol and potassium ferricyanide (K₃[Fe(CN)₆]) in alkaline solution. A laboratory-built reaction flow cell and a photon counter were deployed for the CL detection. Experimental conditions for CL detection were studied in detail to achieve a maximum assay sensitivity. Optimal conditions were found to be 1.0 × 10⁻⁴ M luminol added to the CE running buffer and 1.0 × 10⁻⁴ M K₃[Fe(CN)₆] in 0.2 M NaOH solution introduced postcolumn. The proposed CE-CL assay showed good repeatability (relative standard deviation [RSD] = 3.5%, n = 11) and a detection limit of 3.5 × 10⁻⁷ M UA (signal/noise ratio [S/N] = 3). A linear calibration curve ranging from 6.0 × 10⁻⁷ to 3.0 × 10⁻⁵ M UA was obtained. The method was evaluated by quantifying UA in human urine and serum samples with satisfactory assay results.     

ZnO–CuxO/polypyrrole nanocomposite modified electrode for simultaneous determination of ascorbic acid,dopamine, and uric acid

Novel zinc oxide (ZnO) nanosheets and copper oxide (Cu_xO, CuO, and Cu₂O) decorated polypyrrole (PPy) nanofibers (ZnO–Cu_xO–PPy) have been successfully fabricated for the simultaneous determination of ascorbic acid (AA), dopamine (DA), and uric acid (UA). The morphology and structure of ZnO–Cu_xO–PPy nanocomposites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy. Compared with the bare glassy carbon electrode (GCE), PPy/GCE, Cu_xO–PPy/GCE, and ZnO–PPy/GCE, ZnO–Cu_xO–PPy/GCE exhibits much higher electrocatalytic activities toward the oxidation of AA, DA, and UA with increasing peak currents and decreasing oxidation overpotentials. Cyclic voltammetry (CV) results show that AA, DA, and UA could be detected selectively and sensitively at ZnO–Cu_xO–PPy/GCE with peak-to-peak separation of 150 and 154 mV for AA–DA and DA–UA, respectively. The calibration curves for AA, DA, and UA were obtained in the ranges of 0.2 to 1.0 mM, 0.1 to 130.0 μM, and 0.5 to 70.0 μM, respectively. The lowest detection limits (signal/noise = 3) were 25.0, 0.04, and 0.2 μM for AA, DA, and UA, respectively. With good selectivity and sensitivity, the current method was applied to the determination of DA in injectable medicine and UA in urine samples.     

Ultrasensitive DNA sensor based on gold nanoparticles/reduced graphene oxide/glassy carbon electrode

We have designed a simple and novel electrochemical biosensor based on glassy carbon electrode (GCE) for DNA detection. GCE was modified with reduced graphene oxide (RGO) and gold nanoparticles (AuNPs) by the electrochemical method, which is helpful for immobilization of thiolated bioreceptors. The electrode modification processes were characterized by scanning electron microscopy (SEM) and electrochemical methods. Then a single-stranded DNA (ssDNA) probe for BRCA1 5382 insC mutation detection was immobilized on the modified electrode for a specific time. The experimental conditions, such as probe immobilization time and target DNA (complementary DNA) hybridization time and temperature with probe DNA, were optimized using electrochemical methods. The electrochemical response for DNA hybridization and synthesis was measured using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) methods. The calibration graph contains two linear ranges; the first part is in the range of 3.0 × 10⁻²⁰ to 1.0 × 10⁻¹² M, and the second segment part is in the range of 1.0 × 10⁻¹² to 1.0 × 10⁻⁷ M. The biosensor showed excellent selectivity for the detection of the complementary sequences from noncomplementary sequences, so it can be used for detection of breast cancer.     

Electrochemical DNA biosensor based on silver nanoparticles/poly(3-(3-pyridyl) acrylic acid)/carbon nanotubes modified electrode

In this work, we present an electrochemical DNA sensor based on silver nanoparticles/poly(trans-3-(3-pyridyl) acrylic acid) (PPAA)/multiwalled carbon nanotubes with carboxyl groups (MWCNTs-COOH) modified glassy carbon electrode (GCE). The polymer film was electropolymerized onto MWCNTs-COOH modified electrode by cyclic voltammetry (CV), and then silver nanoparticles were electrodeposited on the surface of PPAA/MWCNTs-COOH composite film. Thiol group end single-stranded DNA (HS-ssDNA) probe was easily covalently linked onto the surface of silver nanoparticles through a 5′ thiol linker. The DNA hybridization events were monitored based on the signal of the intercalated adriamycin by differential pulse voltammetry (DPV). Based on the response of adriamycin, only the complementary oligonucleotides gave an obvious current signal compared with the three-base mismatched and noncomplementary oligonucleotides. Under the optimal conditions, the increase of reduction peak current of adriamycin was linear with the logarithm of the concentration of the complementary oligonucleotides from 9.0 × 10⁻¹² to 9.0 × 10⁻⁹ M with a detection limit of 3.2 × 10⁻¹² M. In addition, this DNA sensor exhibited an excellent reproducibility and stability during DNA hybridization assay.     

On-line chemiluminescence determination of mitoxantrone by capillary electrophoresis

A novel capillary electrophoresis (CE) with chemiluminescence (CL) detection method for the determination of mitoxantrone (MTX) has been developed, which based on the CL reaction of potassium ferricyanide with luminol in sodium hydroxide medium sensitized by MTX. Under optimum analytical conditions, MTX is determined over the range of 7.0 × 10⁻⁸–1.0 × 10⁻⁶ M with a detection limit of 1.0 × 10⁻⁸ M. The relative standard deviation (RSD) was 3.7%, 2.6% and 3.0% for 7.0 × 10⁻⁸, 5.0 × 10⁻⁷ and 1.0 × 10⁻⁶ M MTX (n = 11), respectively. In laboratory-built CE–CL apparatus, the proposed method has been applied to determination of MTX in commercial drug and spiked in human urine and plasma with satisfactory results.     

Zinc oxide/redox mediator composite films-based sensor for electrochemical detection of important biomolecules

Electrochemical oxidation of serotonin (SN) onto zinc oxide (ZnO)-coated glassy carbon electrode (GCE) results in the generation of redox mediators (RMs) that are strongly adsorbed on electrode surface. The electrochemical properties of zinc oxide-electrogenerated redox mediator (ZnO/RM) (inorganic/organic) hybrid film-coated electrode has been studied using cyclic voltammetry (CV). The scanning electron microscope (SEM), atomic force microscope (AFM), and electrochemical techniques proved the immobilization of ZnO/RM core/shell microparticles on the electrode surface. The GCE modified with ZnO/RM hybrid film showed two reversible redox peaks in acidic solution, and the redox peaks were found to be pH dependent with slopes of −62 and −60 mV/pH, which are very close to the Nernst behavior. The GCE/ZnO/RM-modified electrode exhibited excellent electrocatalytic activity toward the oxidations of ascorbic acid (AA), dopamine (DA), and uric acid (UA) in 0.1 M phosphate buffer solution (PBS, pH 7.0). Indeed, ZnO/RM-coated GCE separated the anodic oxidation waves of DA, AA, and UA with well-defined peak separations in their mixture solution. Consequently, the GCE/ZnO/RMs were used for simultaneous detection of DA, AA, and UA in their mixture solution. Using CV, calibration curves for DA, AA, and UA were obtained over the range of 6.0 × 10⁻⁶ to 9.6 × 10⁻⁴ M, 1.5 × 10⁻⁵ to 2.4 × 10⁻⁴ M, and 5.0 × 10⁻⁵ to 8 × 10⁻⁴ M with correlation coefficients of 0.992, 0.991, and 0.989, respectively. Moreover, ZnO/RM-modified GCE had good stability and antifouling properties.     

Carbon nanotube-enhanced DNA biosensor for DNA hybridization detection using manganese(II)-Schiff base complex as hybridization indicator

A Mn(II) complex, MnL (L = sodium (E)-3-((1-carboxyethylimino)methyl)-4-hydroxybenzenesulfonate), was synthesized and characterized using elemental analysis and IR spectroscopy. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction between MnL and salmon sperm DNA. It was revealed that MnL presented high electrochemical activity on glassy carbon electrode (GCE), and it could be intercalated into the double helices of double-stranded DNA (dsDNA). Using MnL as the hybridization indicator, a novel and sensitive electrochemical DNA biosensor based on multiwall carbon nanotubes functionalized with carboxyl groups (MWCNTs-COOH, on which DNA probes were covalently immobilized) was prepared. The target single-stranded DNA (ssDNA) could be quantified ranging from 6.7 × 10⁻¹⁰ M to 8.4 × 10⁻⁹ M with good linearity (r = 0.9922). A detection limit of 1.4 × 10⁻¹⁰ M (3σ, n = 9) was achieved.     

An electrochemical sensor based on single-stranded DNA-poly(sulfosalicylic acid) composite film for simultaneous determination of adenine, guanine, and thymine

Poly(sulfosalicylic acid) and single-stranded DNA composite (PSSA–ssDNA)-modified glassy carbon electrode (GCE) was prepared by electropolymerization and then successfully used to simultaneously determine adenine (A), guanine (G), and thymine (T). The characterization of electrochemically synthesized PSSA–ssDNA film was investigated by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The modified electrode exhibited enhanced electrocatalytic behavior and good stability for the simultaneous determination of A, G, and T in 0.1 M phosphate buffer solution (PBS, pH 7.0). Well-separated voltammetric peaks were obtained among A, G, and T presented in the analyte mixture. Under the optimal conditions, the peak currents for A, G, and T increased linearly with the increase of analyte mixture concentration in the ranges of 6.5 × 10⁻⁸ to 1.1 × 10⁻⁶, 6.5 × 10⁻⁸ to 1.1 × 10⁻⁶, and 4.1 × 10⁻⁶ to 2.7 × 10⁻⁵ M, respectively. The detection limits (signal/noise = 3) for A, G, and T were 2.2 × 10^–8, 2.2 × 10^–8, and 1.4 × 10^–6 M, respectively.     

Simultaneous determination of catecholamines, uric acid and ascorbic acid at physiological levels using poly(N-methylpyrrole)/Pd-nanoclusters sensor

An interesting electrochemical sensor has been constructed by the electrodeposition of palladium nanoclusters (Pd_nano) on poly(N-methylpyrrole) (PMPy) film-coated platinum (Pt) electrode. Cyclic voltammetry, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy were used to characterize the properties of the modified electrode. It was demonstrated that the electroactivity of the modified electrode depends strongly on the electrosynthesis conditions of the PMPy film and Pd_nano. Moreover, the modified electrode exhibits strong electrocatalytic activity toward the oxidation of a mixture of dopamine (DA), ascorbic acid (AA), and uric acid (UA) with obvious reduction of overpotentials. The simultaneous analysis of this mixture at conventional (Pt, gold [Au], and glassy carbon) electrodes usually struggles. However, three well-resolved oxidation peaks for AA, DA, and UA with large peak separations allow this modified electrode to individually or simultaneously analyze AA, DA, and UA by using differential pulse voltammetry (DPV) with good stability, sensitivity, and selectivity. This sensor is also ideal for the simultaneous analysis of AA, UA and either of epinephrine (E), norepinephrine (NE) or l-DOPA. Additionally, the sensor shows strong electrocatalytic activity towards acetaminophen (ACOP) and other organic compounds. The calibration curves for AA, DA, and UA were obtained in the ranges of 0.05 to 1 mM, 0.1 to 10 μM, and 0.5 to 20 μM, respectively. The detection limits (signal/noise [S/N] = 3) were 7 μM, 12 nM, and 27 nM for AA, DA, and UA, respectively. The practical application of the modified electrode was demonstrated by measuring the concentrations of AA, DA, and UA in injection sample, human serum, and human urine samples, respectively, with satisfactory results. The reliability and stability of the modified electrode gave a good possibility for applying the technique to routine analysis of AA, DA, and UA in clinical tests.     

An electrochemical DNA biosensor based on gold nanorods decorated graphene oxide sheets for sensing platform

A simple electrochemical sensor for sensitive and selective DNA detection was constructed based on gold nanorods (Au NRs) decorated graphene oxide (GO) sheets. The high-quality Au NRs–GO nanocomposite was synthesized via the electrostatic self-assembly technique, which is considered a potential sensing platform. Differential pulse voltammetry was used to monitor the DNA hybridization event using methylene blue as an electrochemical indicator. Under optimal conditions, the peak currents of methylene blue were linear with the logarithm of the concentrations of complementary DNA from 1.0 × 10⁻⁹ to 1.0 × 10⁻¹⁴ M with a detection limit of 3.5 × 10⁻¹⁵ M (signal/noise = 3). Moreover, the prepared electrochemical sensor can effectively distinguish complementary DNA sequences in the presence of a large amount of single-base mismatched DNA (1000:1), indicating that the biosensor has high selectivity.     

Large catalase based bioelectrode for biosensor application

A large catalase (CAT) (Mr ~ 90 kDa), immobilized on multiwalled carbon nanotubes—Nafion^® (MWCNT-NF) matrix and encapsulated with polyethylenimine (PEI) on glassy carbon electrode (GCE), showed a pair of nearly reversible cyclic voltammetric peaks for Fe^(III)/Fe^(II) couple with formal potential of about −0.45 V (vs. Ag/AgCl electrode at pH 7.5). PEI significantly reduced the charge transfer resistance and stabilized the bioelectrode through electrostatic interaction. The electron transfer rate constant and surface coverage of the immobilized CAT were 1.05 ± 0.2 s⁻¹ and 2.1 × 10⁻¹⁰ mol cm⁻², respectively. Studies on electrocatalytic activity and kinetics of GCE/MWCNT-NF/CAT/PEI for hydrogen peroxide (H₂O₂) showed the apparent Michaelis-Menten constant of 3 mM, linear response in the range of 10 μM to 5 mM, response time of ~ 2 s for steady state current, and detection limit of ~ 1 μM. A high operational and storage stability was also demonstrated for the bioelectrode. Hence, the direct electrochemistry of the large catalase and its potential biosensor application have been established through this investigation.     

Fabrication of chronocoulometric DNA sensor based on gold nanoparticles/poly(l-lysine) modified glassy carbon electrode

In this work, we fabricated a sensitivity chronocoulometric DNA sensor (CDS) based on gold nanoparticles (AuNPs)/poly(l-lysine) complex film modified glassy carbon electrode. Hexaammineruthenium(III) chloride ([Ru(NH₃)₆]³⁺) was used as the electroactive indicator. The assembled process was investigated by cyclic voltammetry (CV) and chronocoulometry (CC). CC is used to monitor the DNA hybridization event by measurement of electrostatic binding [Ru(NH₃)₆]³⁺. Under the optimal conditions, the signal of [Ru(NH₃)₆]³⁺ was linear with the logarithm of the concentration of the complementary oligonucleotides from 1.0 × 10⁻¹³ to 1.0 × 10⁻¹¹ M, and the detection limit is 3.5 × 10⁻¹⁴ M.     

Synthesis of γ-cyclodextrin/chitosan composites for the efficient removal of Cd(II) from aqueous solution

The synthesis of chitosan-graft-γ-cyclodextrin (Ch-g-γ-CD) using persulfate/ascorbic acid redox system was done and characterized by FTIR, XRD, TGA and SEM/EDX. The optimum yield of the copolymer was obtained using 16 × 10⁻³ M γ-cyclodextrins (γ-CD), 2.8 × 10⁻² M ascorbic acid (AA), 1.8 × 10⁻² M K₂S₂O₈ and 0.1 g chitosan in 25 mL of 2% aqueous formic acid at 45 ± 0.2 °C. The highest percent grafting samples were evaluated for cadmium metal ion (Cd(II)) removal from the aqueous solutions where the sorption capacities were found proportional to the grafting extent. The sorption was pH and concentration dependent where, pH = 8.5 was found to be the optimum value. The adsorption data were modeled using Langmuir and Freundlich isotherms. The equilibrium data followed the Langmuir isotherm model with maximum sorption capacity of 833.33 mg/g. The influence of electrolytes, sodium chloride (NaCl) and sodium sulphate (Na₂SO₄) on Cd(II) uptake was also studied. Desorption of the cadmium loaded Ch-g-γ-CD was accomplished with 0.01 N H₂SO₄. The adsorbent exhibited high reusability and could be successfully recycled for nine cycles where in the ninth cycle 27% adsorption was feasible.     

Xanthine microsensor based on polypyrrole molecularly imprinted film modified carbon fiber microelectrodes

A molecularly imprinted polymers (MIPs) microsensor was presented as a carbon fiber microelectrode (CFME) coating for specifically recognizing xanthine (Xan). The polymeric film was obtained based on the imprinted procedure of electropolymerization of pyrrole in the presence of the template molecule Xan by cyclic voltammetry, and template was removed by magnetic stirring. Under the optimum conditions, a satisfactory molecularly binding selectivity of Xan was obtained from the MIPs microsensor with an imprinting factor (IF) of 6.63 and a linear response to concentration in certain ranges. The ranges are from 4.0 × 10⁻⁶ to 6.0 × 10⁻⁵ M and from 8.0 × 10⁻⁵ to 2.0 × 10⁻³ M with a detection limit of 2.5 × 10⁻⁷ M. Meanwhile, good stability (relative standard deviation [RSD] = 3.2%, n = 10) and reproducibility (RSD = 2.0%, n = 10) were observed, and recoveries ranging from 96.9 to 102.5% were calculated when applied to Xan determination in real blood serum samples.     

Electrochemical analysis of the alanine phenylthiohydantoin derivative by cathodic stripping voltammetry

A square-wave cathodic stripping voltammetry method for alanine determination as its phenylthiohydantoin (PTH-alanine) derivative is developed. To this end, all the chemical and instrumental variables affecting the determination of PTH-alanine are optimized. From studies of the mechanisms governing the electrochemical response of PTH-alanine, it was concluded that it is an electrochemically irreversible system with a diffusive-adsorptive reduction phenomenon. Under optimal conditions, the variation of analytical signal (I_p) with PTH-alanine concentration is linear in the 2.4 × 10⁻⁸ − 4.8 × 10⁻⁷ M range, with a LOD of 1.2 × 10⁻⁸ M and a LOQ of 4.2 × 10⁻⁸ M, a RSD (%) less than 11%, and a E_r (%) less than 10%. The optimized method was applied to the determination of PTH-alanine obtained from a synthetic protein after Edman reaction and the results were corroborated by high-performance liquid chromatography with UV detection.     

Influence of exogenous salicylic acid on flavonolignans and lipoxygenase activity in the hairy root cultures of Silybum marianum

Silymarin is one of the most potent antioxidant so far developed from plant sources used as hepatoprotectants. Influence of different concentrations (0, 1, 2, 4, 6 and 8 mg/50 ml culture) and exposure time (24, 48, 72, 96 and 120 h) of salicylic acid on lipoxygenase activity, linoleic acid content, growth and production of silymarin in hairy root cultures of S. marianum were investigated. Detection and identification of flavonolignans was carried out by high performance liquid chromatograph method. Salicylic acid enhanced silymarin production (1.89 mg g⁻¹ DW). The optimal feeding condition was the addition of salicylic acid (6 mg/50 ml culture) after 24 h in which the silymarin content was 2.42 times higher than the control (0.78 mg g⁻¹ DW). The content of silybin, isosilybin, silychristin, silydianin and taxifolin were 0.703, 0.017, 0.289, 0.02 and 0.863 mg g⁻¹ DW respectively in these samples, while in non-treated hairy roots were 0.027, 0.046, 0.23, 0.022 and 0.453 respectively. Lipoxygenase activity also affected by elicitation. lipoxygenase activity increased 24 h after treatment by ∼1.57- fold (0.21 Δ OD₂₃₄/mg protein min⁻¹). Upon elicitation with salicylic acid, linoleic acid content of hairy roots (38.26 mg g⁻¹ DW) were also elevated after 24 h, in which the linoleic acid content was 2.37 times higher than the control (16.1 mg g⁻¹ DW). It is feasible that elicitation with salicylic acid regulates the jasmonate pathway, which in turn mediates the elicitor-induced accumulation of silymarin.     

Estrogenic activities of Psoralea corylifolia L. seed extracts and main constituents

Estrogenic activities of ethanol extract and its active components from Psoralea corylifolia L. were studied using various in vitro assays. The main components from ethanol extract were analyzed to be bakuchiol, psoralen, isobavachalcone, isobavachromene, and bavachinin. In a fractionation procedure, hexane and chloroform fractions showed estrogenic activity in yeast transactivation assay and E-screen assay. In yeast transactivation assay, ethanol extract, hexane, and chloroform fractions showed significantly higher activities at a concentration of 1.0 ng/ml, and bakuchiol at the concentration of 10⁻⁶ M was showed the highest activity, especially, which was higher than genistein at the same concentration. In E-screen assay, cell proliferation of bakuchiol (10⁻⁶ M) showed similar estrogenic activity with genistein (10⁻⁶ M). In ER binding assay, bakuchiol displayed the strongest ER-binding affinity (IC₅₀ for ERα = 1.01 × 10⁻⁶ M, IC₅₀ for ERβ = 1.20 × 10⁻⁶ M) and bakuchiol showed five times higher affinity for ERα than for ERβ.     

Inhibition studies with anions and small molecules of two novel β-carbonic anhydrases from the bacterial pathogen Salmonella enterica serovar Typhimurium

Two new β-carbonic anhydrases (CAs, EC 4.2.1.1) from the bacterial pathogen Salmonella enterica serovar Typhimurium, stCA 1 and stCA 2, were characterized kinetically. The two enzymes possess appreciable activity as catalysts for the hydration of CO₂ to bicarbonate, with k_cat of 0.79 × 10⁶ s⁻¹ and 1.0 × 10⁶ s⁻¹, and k_cat/K_m of 5.2 × 10⁷ M⁻¹ s⁻¹ and of 8.3 × 10⁷ M⁻¹ s⁻¹, respectively. A large number of simple/complex inorganic anions as well as other small molecules (sulfamide, sulfamic acid, phenylboronic acid, phenylarsonic acid, dialkyldithiocarbamates) showed interesting inhibitory properties towards the two new enzymes, with several low micromolar inhibitors discovered. As many strains of S. enterica show extensive resistance to classical antibiotics, inhibition of the β-CAs investigated here may be useful for developing lead compounds for novel types of antibacterials.     

The binding site of zinc and indium metal to amino acid derivatized squarate complexes - Implications in inhibitor and mediator designs

Three novel metal squaric acid-peptide complexes, SQI-SQIII were prepared by addition of indium triflate or zinc chloride to the previously reported compounds [1], 3-(hydroxymethylamino)-4-(l-isoleucine methyl ester)-3-cyclobutene-1,2-dione (squarate 1), and 3-(hydroxymethylamino)-2-(l-isoleucine methyl ester)-4-thioxo-2-cyclobuten-1-one (squarate 2). The structures of SQI-SQIII were elucidated using NMR analysis. The electrochemical applications of two of these metal-squaric acid systems (SQI and SQII) were also investigated. Incorporation of SQII as a mediator, in the previously optimized Pt/p(HEMA)/p(pyrrole)/GOx electrode using the ionic liquid [bmim][BF₄] as the solvent medium, produced a biosensor with enhanced properties, namely a sensitivity of 175.9 mA/M d-glucose, working potential of +200 mV, large linear range (0-12 mM) and a detection limit of 1 × 10⁻⁶ M.