A series of heterocyclic and hydrocarbon [8]circulenes (also named completely annelated tetraphenylenes) were studied by the NICS and GIMIC methods in order to describe their aromatic properties from the magnetic criterion point of view. According to calculations all the hetero[8]circulene molecules demonstrate the bifacial aromatic/antiaromatic nature. The inner octatetraene core of the studied [8]circulenes is characterized by the presence of paratropic (“antiaromatic”) ring currents, whereas the outer macrocycle constructed from the five- and six-membered rings possesses the magnetically-induced diatropic (“aromatic”) ring current. The hydrocarbon [8]circulenes studied in this work consist of a similar planar cyclooctatetraene core but they exhibit a rather different balance of magnetically-induced ring currents.
Aromaticity of the completely annelated tetraphenylenes
In the present work, a series of simulation tools were used to determine structure-activity relationships for the endomorphins (EMs) and derive μ-pharmacophore models for these peptides. Potential lowest energy conformations were determined in vacuo by systematically varying the torsional angles of the Tyr1-Pro2 (ω1) and Pro2-Trp3/Phe3 (ω2) as tuning parameters in AM1 calculations. These initial models were then exposed to aqueous conditions via molecular dynamics simulations. In aqueous solution, the simulations suggest that endomorphin conformers strongly favor the trans/trans pair of the ω1/ω2 amide bonds. From two-dimensional probability distributions of the ring-to-ring distances with respect to the pharmacophoric angles for EMs, a selectivity range of μ1 is ca. 8.3 ~ 10.5 Å for endomorphin-2 and selectivity range of μ2 is ca. 10.5 ~ 13.0 Å for endomorphin-1 were determined. Four-component μ-pharmacophore models are proposed for EMs and are compared to the previously published δ- and κ-pharmacophore models.
In the domain of production of flavor delivery systems based on carbohydrate matrices, Hot Melt Extrusion (HME) is one of the processes used which implies a relatively slow water evaporation step compared to Spray Drying or other common processes. The HME process of generating liquid syrup is stable only at industrial scales. The drying kinetic associated to the syrup formation is followed by collecting the vapored water. This experiment is exploited to estimate the diffusion coefficient of liquid water in a continuously concentrating carbohydrate melt ranging from 30.4 to 10.2%w/w water content and at temperatures ranging from 100 to 116 °C. A combination of Fick, Arnold and Vogel-Tammann-Fulcher models was used to derive the viscosity of the solution, the gradient thickness at the surface of the stirred solution and the diffusion coefficient of water in the liquid under boiling conditions. It is here demonstrated that under continuous boiling conditions, the water concentration gradient depth from the surface of the solution has a dimension that is comparable to the size of the hydrated carbohydrate molecules and the diffusion coefficient of water in boiling carbohydrate solutions ranges from 5.10−9 cm.s−2 for low temperature and high water content to 10−11 cm.s−2 for high temperature and low water content.
A post-calculation correction is established for PM7 band gaps of transition-metal oxides. The correction is based on the charge on the metal cation of interest, as obtained from MOPAC PM7 calculations. Application of the correction reduces the average error in the PM7 band gap from ~3 eV to ~1 eV. The residual error after correction is shown to be uncorrelated to the Hartree–Fock method upon which PM7 is based.
Graphical Abstract Comparison between calculated band gaps and experimental band gaps for binary oxides. The orange crosses are for corrected PM7 band gaps. Blue squares are uncorrected values. The orange crosses fall closer to the diagonal dashed line, showing an overall improvement of the accuracy of calculated values
Angiotensin converting enzyme (ACE) is considered as main causative agent in growing hypertension and other cardiovascular disorders. Inhibition of ACE by producing and purifying bioactive peptides of fermented goat milk is aimed in this study. Protein extracted from goat milk was hydrolyzed with proteolytic enzymes of LH (Lactobacillus helveticus-cicc22171). ACE inhibitory peptides were purified from fermented samples of goat milk protein by optimizing incubation time to 8 h (S-8), 16 h (S-16), 24 h (S-24) and 36 h (S-36), via ultrafiltration. S-8 was used as control to compare the ACE inhibition trend. Molecular weight cut-off; 10000 Da (PM-10) and Ultracel 3K membrane was used to perform ultrafiltration. Sample with 24 h incubation time was considered as best hydrolyzed as compared to others, by applying Nin-Hydrin reaction and SDS-PAGE analysis. ACE inhibitory assay validated the authenticity of S-24 in inhibiting ACE, in vitro. Furthermore, Q executive hybrid quadrupole-orbitrap mass spectrometry was used to determine molecular structure and amino acid sequence of ACE inhibitory peptides. Three peptides, VLPVPQKAVPQ, VLPVPQKVVPQ and TQTPVVVPPFLQPEIMGVPKVKE containing functional amino acid structure, has been identified with highest ACE inhibitory activity on the basis of intensity, size and higher concentration of hydrophobic amino acids as shown in figure as graphical abstract. Fermented goat milk containing these novel bioactive peptides, can be used as nutraceuticals to inhibit ACE and control hypertension in future.
Density functional theory (DFT) was utilized to elucidate the reaction mechanisms of and the key factors that influence the Ni(0)-catalyzed cross-dimerization and -trimerization of trimethylsilylacetylene (R1) and diphenylacetylene (R2). Calculated results revealed that the electron-donating ability of the ligand plays a crucial role in determining the regionselectivity of this tandem reaction. The use of strongly electron-donating ligands favors the formation of cross-dimer intermediates, whereas cross-trimer products can easily be synthesized using weakly electron-donating ligands. A simple method of estimating the electron-donating abilities of different ligands based on the Mulliken charge distribution of the ligand–ligand pair was employed. The present theoretical results allow us to elucidate the reaction mechanisms for and to identify the factors that exert the greatest influence on the ligand-controlled cross-dimerization and -trimerization of trimethylsilylacetylene and diphenylacetylene. Guidelines for the design of novel ligand systems with Ni(0) catalysts are also proposed.
New ionic liquids (ILs) involving increasing numbers of organic and inorganic ions are continuously being reported. We recently developed a new force field; in the present work, we applied that force field to investigate the structural properties of a few novel imidazolium-based ILs in aqueous mixtures via molecular dynamics (MD) simulations. Using cluster analysis, radial distribution functions, and spatial distribution functions, we argue that organic ions (imidazolium, deprotonated alanine, deprotonated methionine, deprotonated tryptophan) are well dispersed in aqueous media, irrespective of the IL content. Aqueous dispersions exhibit desirable properties for chemical engineering. The ILs exist as ion pairs in relatively dilute aqueous mixtures (10 mol%), while more concentrated mixtures feature a certain amount of larger ionic aggregates.
In this article, we explore the capacity of formed Schiff base complexes to trap metal atoms or ions, using their aromatic ends. The intrinsic geometry of each complex defines the process of substitution. Two cases were studied; one involving a trans Schiff base complex and the other considering how a salen ligand, with nickel systems traps chromium. We also assessed the nature of the new bonds and the frontier molecular orbitals.
Bond critical points (BCPs) in the quantum theory of atoms in molecules (QTAIM) are shown to be a consequence of the molecular topology, symmetry, and the Poincaré-Hopf relationship, which defines the numbers of critical points of different types in a scalar field. BCPs can be induced by a polarizing field or by addition of a single non-bonded atom to a molecule. BCPs and their associated bond paths are therefore suggested not to be a suitable means of identifying chemical bonds, or even attractive intermolecular interactions.
In this work, through a docking analysis of compounds from the ZINC chemical library on human β-tubulin using high performance computer cluster, we report new polycyclic aromatic compounds that bind with high energy on the colchicine binding site of β-tubulin, suggesting three new key amino acids. However, molecular dynamic analysis showed low stability in the interaction between ligand and receptor. Results were confirmed experimentally in in vitro and in vivo models that suggest that molecular dynamics simulation is the best option to find new potential β-tubulin inhibitors.
Mechanisms for the activation of water, ammonia, and other small molecules by the PCcarbeneP nickel pincer complex were studied computationally with the aid of density functional theory. The calculation results indicate that the strongly donating, nucleophilic carbene center can engage in a variety of heterolytic splitting of E?H (E=H, C, N, O) bonds, some of which are reversible. The cleavage of E?H bonds across the Ni=C bond represents a new mode of bond activation by ligand cooperativity in nickel pincer complex. On the basis of the calculations, we also demonstrate that reversible H2 activation across the Ir=C bond via the PCcarbeneP iridium pincer complex was observed in the experiments, while other E?H (E=C, N, O) bonds were not activated. Our calculations are in good agreement with experimental observations and could provide new insights into ligand cooperativity in nickel pincer complexes.
Development of new energetic salts is the key factor in replacing low performance compounds in conventional formulations of high explosives as well as propellants. Ten salts based on the nitroformate anion and various nitrogen-rich cations were designed and their geometric optimizations carried out using the density functional method. With reasonable oxygen balance (from ?36 % to 0 %), heats of formation (47–624 kJ mol?1) and high densities (1.81–1.89 g cm?3), the detonation velocity (D) and pressure (P) values of salts were calculated as 8.62–9.36 km s?1 and 33.10–40.01 GPa, respectively. Lastly, the nitroformate salts studied in this work are of prospective interest as high performance explosives.
Ionic liquids (ILs) constitute a fast growing class of compounds finding multiple applications in science and technology. Morpholinium-based ILs (MBILs) and their mixtures with polar molecular co-solvents are interesting as sustainable electrolyte systems for electrochemistry. We investigate local structures of protic and apropic morpholinium cations in acetonitrile (ACN) using semi-empirical molecular dynamics (MD) simulations. An impact of an anion (acetate) on the cation solvation regularities is discussed. Unlike oxygen, nitrogen of the morpholine ring is a strong electrophilic binding center. This site is responsible for the interactions of the cation with the solvent and with the anion. In protic MBILs, the role of nitrogen is delegated to the proton, which is linked to nitrogen. The acetate anion weakens solvation of the cation due to occupation of space near nitrogen or proton. The analysis reveals a favorable solvation of MBILs in ACN, which is a prerequisite for a new high-performance electrolyte system. The reported structural data were validated through point-to-point comparison with the MP2 post-Hartree-Fock theory and density functional theory.
A sphere-in-contact model is presented that is used to build physical models of carbon materials such as graphite, graphene, carbon nanotubes and fullerene. Unlike other molecular models, these models have correct scale and proportions because the carbon atoms are represented by their atomic radius, in contrast to the more commonly used space-fill models, where carbon atoms are represented by their van der Waals radii. Based on a survey taken among 65 undergraduate chemistry students and 28 PhD/postdoctoral students with a background in molecular modeling, we found misconceptions arising from incorrect visualization of the size and location of the electron density located in carbon materials. Based on analysis of the survey and on a conceptual basis we show that the sphere-in-contact model provides an improved molecular representation of the electron density of carbon materials compared to other molecular models commonly used in science textbooks (i.e., wire-frame, ball-and-stick, space-fill). We therefore suggest that its use in chemistry textbooks along with the ball-and-stick model would significantly enhance the visualization of molecular structures according to their electron density.
The structure and stability of various ternary complexes in which an extended aromatic system such as coronene interacts with ions/atoms/molecules on opposite faces of the π-electron cloud were investigated using ab initio calculations. By characterizing the nature of the intermolecular interactions using an energy decomposition analysis, it was shown that there is an interplay between various types of interactions and that there are co-operativity effects, particularly when different types of interactions coexist in the same system.
Graphical abstract Weak OH-π, π-π and van der Waals-π ternary systems are stabilized through dispersion interactions. Cation-π ternary systems are stabilized by through-space electrostatic interactions.
Magnetic shielding constants for an isolated fullerene C60, cucurbituril CB[9], and the host-guest complex C60@CB[9] were calculated as a function of separation of the monomers. Our results in the gas phase and water indicate a significant variation of the magnetic properties for all atoms of the monomers in the complex and after liberation of fullerene C60 from the interior of the CB[9] cavity. The interaction between the two monomers results in a charge transfer that collaborates with a redistribution of electron density to deshield the monomers.
In this study, the doped defects in nitromethane crystals were investigated using first-principles calculations for the first time. We introduce dopant atoms in the interstitial sites of the nitromethane lattice, aiming to study the effects of element-doping on the structural properties, electronic properties, and sensitivity characteristics. The obtained results show that doped defects obviously affect the neighboring nitromethane molecules. The modification of electronic properties shows that the band gaps are significantly influenced by doped defects. Partial density of states and population analysis further reveal the mechanism for sensitivity control of nitromethane. It is shown that the new electronic states were introduced in the forbidden bands and the doped defects resulted in charge redistributions in the systems.
Herein we report a study of the switchable [3]rotaxane reported by Huang et al. (Appl Phys Lett 85(22):5391–5393, 1) that can be mounted to a surface to form a nanomechanical, linear, molecular motor. We demonstrate the application of semiempirical electronic structure theory to predict the average and instantaneous force generated by redox-induced ring shuttling. Detailed analysis of the geometric and electronic structure of the system reveals technical considerations essential to success of the approach. The force is found to be in the 100–200 pN range, consistent with published experimental estimates.
Unknown force-field parameters for metal organic beryllium complexes used in emitting and electron transporting layers of OLED structures are determined. These parameters can be used for the predictive atomistic simulations of the structure and properties of amorphous organic layers containing beryllium complexes. The parameters are found for the AMBER force field using a relaxed scan procedure and quantum-mechanical DFT calculations of potential energy curves for specific internal (angular) coordinates in a series of three Be complexes (Bebq2; Be(4-mpp)2; Bepp2). The obtained parameters are verified in calculations of some molecular and crystal structures available from either quantum-mechanical DFT calculations or experimental data.
