A comparison of chemiluminescent and colorimetric substrates in a hepatitis B virus DNA hybridization assay

We compared the sensitivity of a chemiluminescent substrate 3-(2'-spiroadamantane)-4-methoxy-4-(3"-phosphoryloxy)phenyl- 1,2-dioxetane (AMPPD) and a chromogenic substrate 5-bromo-4-chloro-3-indolyl phosphate/nitroblue tetrazolium (BCIP/NBT) for detection of an alkaline phosphatase label in a hepatitis B virus "core antigen" DNA (HBVc) probe hybridization assay. Chemiluminescent signal obtained from AMPPD hydrolysis by alkaline phosphatase was detected with Polaroid Instant Black and White Type 612 film. The chemiluminescent assay detected 1.18 x 10(6) copies of HBVc plasmid DNA in 30 min. By comparison, 9.8 x 10(7) copies of DNA could be measured using chromogenic BCIP/NBT substrate within the same incubation time. After further development, the chemiluminescent endpoint permitted detection of 4.39 x 10(4) copies of HBVc plasmid DNA in 2 h.     

Sensitive fluorescent detection of protein on nylon membranes

Detection of antigen immobilized on membranes, as in Western transfers and dot enzyme linked immunosorbent assays (ELISAs), often employ antibody-enzyme conjugates and chemiluminescent or precipitated colored reaction products. Although chemiluminescent markers are sensitive, they are time-consuming because of their required exposure to X-ray film and the presence of background artifacts sometimes limits their use. This report demonstrates that direct fluorescent detection technique using nylon membranes that has higher sensitivity than chemiluminescent methods is easier to perform and has a uniform, low background. An alkaline phosphatase conjugated antibody was compared with antibody conjugated to a fluorescent phycobiliprotein (allophycocyanin) for sensitivity in both Western transfers and dot ELISA assays using mouse IgG as the membrane-bound antigen. Direct fluorescent detection of antigen-antibody complexes on positively charged nylon membrane provided better sensitivity and lower background than similar conditions using enzyme amplification and chemiluminescent detection on either nylon or PVDF membranes. Processing time was reduced by the elimination of steps associated with substrate incubation, washing and X-ray film exposures required for chemiluminescence detection. These data support the view that direct fluorescent detection can represent a significant improvement in assay sensitivity and reduction in time compared with more traditional chemiluminescent detection techniques employed in the conduct of Western transfers and dot ELISA studies.     

Chemiluminescent assay for the detection of viral and plasmid DNA using digoxigenin-labeled probes.

A dot-blot hybridization immunoenzymatic assay with a chemiluminescent endpoint was developed for the rapid and sensitive detection of viral and plasmid DNAs. Digoxigenin-labeled probes were used to detect cytomegalovirus, parvovirus B19, and plasmid pBR328 DNAs. Hybridized probes were immunoenzymatically visualized by anti-digoxigenin Fab fragments labeled with alkaline phosphatase, and adamantyl 1,2-dioxetane phenyl phosphate was used as chemiluminescent substrate. Results were recorded by instant photographic films. The chemiluminescent hybridization assay was performed in about 8 hr and was able to detect as little as 50-10 fg of homologous target DNA.     

An optimized method for the chemiluminescent detection of alkaline phosphatase levels during osteodifferentiation by bone morphogenetic protein 2

Differentiation of osteoprogenitor cells into osteoblasts is a pivotal step during the normal development and repair of bone. Upregulation of endogenous cellular alkaline phosphatase activity (AP) is a commonly used intracellular marker for the assessment of osteoprogenitor cell differentiation into the osteoblastic phenotype. Current methods for assaying AP involve colorimetric detection of the enzyme's activity using the synthetic substrate p-nitrophenol phosphate. In this paper, we explored an alternative method of detecting AP using the chemiluminescent substrate disodium 3-(4-methoxyspiro[1,2-dioxetane-3,2'-(5'-chloro)tricyclo[3.3.1.1(3,7)]decan]-4-yl) phenyl phosphate (CSPD) for enhanced AP sensitivity and a more simplified assay. Using calf intestinal alkaline phosphatase as a standardizing enzyme, we determined that the chemiluminescent detection system was four orders of magnitude more sensitive than the standard colorimetric method of detection. Moreover, the chemiluminescent assay was faster and markedly simpler to perform. To maximize the utility of this assay system, two osteoprogenitor cell lines were compared for their ability to generate alkaline phosphatases in vitro when exposed to recombinant human bone morphogenetic protein (rhBMP-2). The W20-17 cell line was substantially more sensitive to rhBMP-2 than the C3H10T1/2 cell line, where each cell line produced detectable increases in AP after exposure to rhBMP-2 levels of 5 and 25 ng/ml, respectively. The experimental design for AP responsiveness to rhBMP-2 was further optimized for chemiluminescent detection with the W20-17 cell line by comparing the effects of reporter cell seeding density and the day of assay. In summary, the data presented in this paper demonstrate a faster, simpler, and more sensitive chemiluminescent method to monitor changes in AP levels during osteodifferentiation.     

Genomic Southern analysis with alkaline-phosphatase-conjugated oligonucleotide probes and the chemiluminescent substrate AMPPD

We have used a chemiluminescent detection method to improve both the sensitivity and the speed of detection of human genes with oligonucleotide probes. A direct chemiluminescent substrate (AMPPD) was used in combination with an alkaline-phosphatase-labeled oligonucleotide probe to detect the human tissue of plasminogen activator gene by Southern blot analysis. X-ray exposures obtained after 4 h were comparable to those obtained after 7 days with a 32P-labeled oligomer. After 16 h, the signal was 12 times greater than the 32P signal. The detection of the single-copy tissue plasminogen activator gene in 0.25 micrograms of human genomic DNA (76,000 molecules) was achieved. The improved sensitivity obtained by chemiluminescent detection should increase the usefulness of oligonucleotide probes in the direct Southern analysis of human genetic disorders.     

Rapid and sensitive detection of DNA in Southern blots with chemiluminescence

A new chemiluminescent Southern blot procedure offers molecular biologists a safe, ultrasensitive and rapid alternative to conventional 32P-based systems. This new DNA detection system, SOUTHERN-LIGHT, has been developed by Tropix, Inc. The luminescent signal is produced from a direct chemiluminescent substrate, disodium 3-(4-methoxyspiro[1,2-dioxetane-3-2'-tricyclo-[3.3.1.1 .3,7]decan]-4-yl) phenyl phosphate (AMPPD), which decomposes upon dephosphorylation with alkaline phosphatase. SOUTHERN-LIGHT is an ultrasensitive, rapid detection kit for use with membrane-bound DNA. It is the first test kit to incorporate AMPPD. It requires no specialized equipment and results can be conveniently imaged on instant film or x-ray film within 5-60 min of exposure.     

Detection of Listeria monocytogenes with a nonisotopic polymerase chain reaction-coupled ligase chain reaction assay.

A polymerase chain reaction (PCR)-coupled ligase chain reaction (LCR) assay for the specific detection of Listeria monocytogenes (M. Wiedmann, J. Czajka, F. Barany, and C. A. Batt, Appl. Environ. Microbiol. 58:3443-3447, 1992) has been modified for detection of the LCR products with a nonisotopic readout. When a chemiluminescent or a colorimetric substrate for the nonisotopic detection of the LCR products was used, the PCR-coupled LCR gave a sensitivity of 10 CFU of L. monocytogenes. The detection method with the chemiluminescent substrate Lumi-Phos 530 permitted detection of the LCR products in less than 3 h, so that the whole assay can be completed within 10 h.     

Chemiluminescent detection of DNA on nylon membranes.

Two types of nonradioactive DNA detection systems were optimized for use with nylon membranes in Southern transfers. A luminol substrate system (consisting of an enhanced chemiluminescent reaction utilizing luminol enzyme substrate) was used with peroxidase-labeled probe DNA, and a dioxetane-based substrate was used with alkaline phosphatase/antibody and digoxigenin-labeled probe DNA. Chemiluminescence was detected by autoradiography. Methods for reprobing the membranes were also optimized for both systems; blots could be reprobed at least ten times. Results showed that excellent sensitivity and low background can be achieved on both amphoteric and positively charged nylon membranes, using either detection system.     

A chemiluminescent assay for quantitation of beta-galactosidase in the femtogram range: application to quantitation of beta-galactosidase in lacZ-transfected cells.

An optimized chemiluminescent assay for beta-galactosidase using a chemiluminescent substrate AMPGD (3-(4-methoxyspiro[1,2-dioxetane-3,2'-tricyclo-[3.3.1. 1(3,7)]decan]-4- yl)phenyl-beta-D-galactopyranoside) is described. This assay is rapid and sensitive and can detect as little as 2 fg of beta-galactosidase. Its use for the quantitation of beta-galactosidase in cells transfected with lacZ-expressing vectors is described. It is possible to detect a single cell stably expressing lacZ by this technique.     

Non-radioactive techniques for the labelling of nucleic acids

Non-radioactively labelled probes potentially have several advantages over radioactively labelled ones, such as increased stability and reduced hazard. As yet, no non-radioactive methods of labelling are as robust or produce as sensitive a probe as 32P. However, there are many options, some of which use approaches familiar to 32P users (nick translation, random priming, tailing). The majority of methods, whether enzymatic or chemical, direct or indirect, ultimately require the detection of an enzyme by a colourimetric or chemiluminescent substrate. Such detection can be achieved variously by direct visualisation (e.g. of a colourimetrically stained blot), by film, by microtitre plate reader or by CCD camera, depending on the choice of assay format and the degree of quantification required.     

Characteristics and detection principles of a new enzyme label producing a long-term chemiluminescent signal

A new enzyme label system is described which is superior to all existing chemiluminescence labels used in immunoassays. The system consists of the enzyme xanthine oxidase with hypoxanthine as substrate. The signal reagent contains perborate, an Fe–EDTA complex and luminol. The enzyme preparation and the signal reagent are very stable upon storage. The main features of the system are a long duration of the chemiluminescent signal (half-life time of 30 hours) and a very low limit of detection (about 3 amol). Possibilities and implications for the use of various measuring system are discussed.     

A rapid and simple chemiluminescent assay for Escherichia coli beta-galactosidase.

We describe a chemiluminescent assay for E. coli beta-galactosidase using Lumi-Gal 530, a commercial formulation containing a stable phenylgalactose-substituted dioxetane as the substrate. Removal of the galactose moiety leads to the generation of an unstable dioxetane which decomposes to provide the observed chemiluminescence which is measured with a luminometer. Advantages of the assay are that it is simple, inexpensive and has 20-fold greater sensitivity than the standard spectrophotometric assay. Additional advantages are that the dioxetane is quite stable in the commercial formulation, and beta-galactosidase functions efficiently and is not degraded during the course of an assay. As luminometers are becoming commonplace in molecular biology laboratories, this assay provides a preferable alternative to the spectrophotometric assay.     

Evaluation of non-radioactive labelling and detection of deoxyribonucleic acids: Part one: chemiluminescent methods

The growth of analytical methods for the detection of nucleic acid from various biological samples reflects recent advances in biotechnology development especially in the areas of genetic, infections and cancer diagnosis. The target DNA is detected by hybridization techniques derived from Southern's blotting. However such assays, based on the use of ³²P labelled DNA probes, bring with them the associated problems of handling radioactive materials. In order to overcome these difficulties, a number of chemiluminescent detection methods have recently been developed.These new, alternative probe labelling procedures and chemiluminescent detection methods are easy to use in routine assays performed in research laboratories as well as for medical applications, and can reach the level of sensitivity found in classical radiolabelling techniques.The techniques investigated include peroxydase, biotin 16-dUTP or digoxigenin 11-dUTP probe labelling. The target DNAs are transferred onto nitrocellulose or nylon membranes and further fixed by heat or UV crosslinking. Specific hybridization on the target DNA is finally revealed by the use of chemiluminescent substrates. For all these techniques the detection limit is 10 aM (attomol) of a 561 bp target DNA. However for the probes labelled with peroxydase and with digoxigenin the detection limit drops to 1.0 aM of the target DNA. In the present paper we shall compare several of these DNA labelling and detection procedures and show that the detection threshold can vary by as much as a factor of 20 from method to method. This is the first time that various chemiluminescent methods for label and detection of DNA are compared and evaluated in order to determine the best protocol.     

A two-step hybridization method for chemiluminescent detection of single copy genes.

We have developed a technique for the chemiluminescent detection of single copy genes that eliminates the high backgrounds and problems with probe labeling associated with existing methods. The procedure employs a primary hybridization of single-stranded probe DNA to immobilized target DNA, a secondary hybridization with a covalently cross-linked oligonucleotide-alkaline phosphatase conjugate, followed by incubation in the chemiluminescent substrate AMPPD and detection on x-ray film. The key to the success of this method is that the primary probe contains a region complementary to the target DNA as well as to the oligonucleotide sequence of the secondary probe-alkaline phosphatase conjugate. Here we report our results using the two-step hybridization procedure to detect single copy genes from genomic Southern blots.     

A novel biotinylated heterobifunctional cross-linking reagent bearing an aromatic diazirine

The synthesis of a p-[(3-trifluoromethyl)diazirine-3-yl]benzoic acid derivative is described as a new carbene generating heterobifunctional cross-linking reagent. The cross-linker carries a biotin moiety in order to make use of avidin—biotin technology for specific manipulation of cross-linked components. To evaluate the ability of this reagent, the inter-subunit cross-linking of egg-white avidin tetramer was investigated. As a typical application of avidin—biotin technology for cross-linking experiments, a chemiluminescent detection method was examined to identify photobiotinylated components. A cross-linked dimeric product with an apparent molecular mass of 38 kDa was clearly visualized by the combined use of a horseradish peroxidase—streptavidin conjugate and a luminol-based chemiluminescent system.     

A comparative study of peroxidases from horse radish and Arthromyces ramosus as labels in luminol-mediated chemiluminescent assays.

The properties of a peroxidase from Arthromyces ramosus (ARP) in the chemiluminescent reaction of luminol oxidation have been studied. These were compared with the properties of horse radish peroxidase (HRP) in the cooxidation of luminol and p-iodophenol, the enhanced chemiluminescence (ECL) reaction. By means of the stop-flow technique, ARP was shown to have an enzymatic activity toward luminol higher than that toward HRP. ARP can efficiently catalyze luminol oxidation in the absence of substrate enhancer. pH and substrate concentrations were optimized to determine ARP with the highest sensitivity. The detection limit of ARP was 5 x 10(-13) M, the same as that for HRP in the ECL reaction. The data on the use of ARP as a label in enzyme immunoassay of human IgG are presented. ARP was shown to have all the advantages of HRP as a label in chemiluminescent enzyme immunoassays: (i) high signal intensity, (ii) slow decay of luminescence, (iii) high signal/noise ratio, and (iv) as a consequence of (i)-(iii), high detection sensitivity. However, the low thermostability of ARP can limit the potential fields of its application.     

Development of a highly sensitive chemiluminescence enzyme immunoassay using enhanced luminol as substrate

In this study, a high sensitivity chemiluminescence enzyme immunoassay (CLEIA) based on novel enhancers was developed. Under optimal conditions, we developed an enhanced chemiluminescence reaction (ECR) catalyzed by horseradish peroxidase (HRP‐C) in the presence of 3‐(10'‐phenothiazinyl) propane‐1‐sulfonate (SPTZ) and 4‐morpholinopyridine (MORP) as enhancers. The limit of detection of the newly prepared chemiluminescent cocktail for HRP was 0.33 pg/well, which is lower than that of commercial Super Signal substrate. The results showed that this novel chemiluminescent cocktail can significantly increase the light output of HRP‐catalyzed ECR, which can be translated into a corresponding improvement in sensitivity. Similar improvements were observed in CLEIA for the determination of chloramphenicol in milk. In addition, the ECR of N‐azoles as secondary enhancer was also presented. Copyright © 2013 John Wiley & Sons, Ltd.     

Improved chemiluminescent western blotting procedure.

A chemiluminescent Western blotting procedure and its application in assays for human transferrin and human immunodeficiency virus-I antibodies are described. The procedure is based on a chemiluminescent substrate, adamantyl 1,2-dioxetane aryl phosphate and alkaline phosphatase-labeled detection antibodies. Different membranes (polyvinylidene fluoride, nitrocellulose, nylon) and a proprietary membrane treatment agent (Nitro-Block) have been studied. This sensitive blotting procedure utilizing AMPPD, a polyclonal rabbit anti-transferrin:goat anti-rabbit IgG-alkaline phosphatase detection complex, and a PVDF membrane blocked with Nitro-Block permits the detection of 125 pg (1.6 fmol) of human transferrin. A novel 1,2-dioxetane substrate, CSPD, has also been evaluated.     

Metabolism of benzoquinone by yeast cells and oxidative characteristics of corresponding hydroquinone: application to highly sensitive measurement of yeast cell density by using benzoquinone and a chemiluminescent probe

The metabolic efficiency of seven derivatives of 1,4-benzoquinone (BQ) by yeast cells and the oxidative characteristics of the corresponding hydroquinones (HQs) were studied by electrochemical, spectrophotometric and chemiluminescent methods. The spectrophotometric method was based on the reduction of a tetrazolium salt to formazan dye during the autoxidation of HQs generated by yeast cells under alkaline conditions. The amounts of HQs detected directly by the electrochemical method did not agree with those calculated from the formazan dye obtained by the spectrophotometric method. A tetrazolium salt was reduced to a formazan dye by both the superoxide anion radical (O2-*) generated during the autoxidation of 2,3,5,6-tetramethyl-1,4-HQ and by HQ itself. Little formazan dye was formed, and hydrogen peroxide (H2O2) was then finally produced during the autoxidation of 1,4-HQ or 2-methyl-1,4-HQ. Formazan dye and H2O2 were generated at a certain ratio during the autoxidation of derivatives of dimethyl-1,4-HQ or 2,3,5-trimethyl-1,4-HQ. The analytical method based on chemiluminescence with lucigenin and 2,3,5,6-tetramethyl-1,4-BQ was applied to highly sensitive measurement of the yeast cell density. A linear relationship between the chemiluminescence intensity and viable cell density was obtained in the range of 1.2 x 10(3) - 4.8 x 10(4) cells/ml. The detection limit was 4.8 x 10(2) cells/ml.     

Quantitative detection in the attomole range for immunochromatographic tests by means of a flatbed scanner

This work describes the use of the combination of carbon black as an antibody label, a membrane-based immunochromatographic device, and a flatbed scanner as a quantitative test system. The scanner detected 0.4-345 ng carbon black/mm(2) on a nitrocellulose membrane (0.2-170 amol carbon black/mm(2)) with an imprecision (coefficient of variation, CV) lower than 2% for the carbon black determination and a detection limit of 0.04 ng carbon black/mm(2) (0.02 amol/mm(2)). The detection ability was compared to that obtained with alkaline phosphatase (ALP) using a substrate yielding a chemiluminescent signal (0.02 amol ALP/well), beta-galactosidase using a substrate yielding a fluorescent signal (0.3 amol beta-galactosidase/well), and horseradish peroxidase (HRP) using a substrate yielding a colored signal (5 amol HRP/microtiter well). The carbon black immunochromatographic test for immunoglobulin E (IgE) showed a detection limit of 0.13 pM IgE (0.01 kU/L) after a testing time of 10 min. The scanner detection imprecision for the IgE determination was 0.6% CV in the range 1-10 kU IgE/L when 2.3 mm(2) was used for detection and 1% CV when 0.19 mm(2) was used. A flatbed scanner is an inexpensive instrument with multiple uses, which now also includes the sensitive evaluation of immunoassays.