Product specific emissions from municipal solid waste landfills

This paper presents and verifies the computer tool LCA-LAND for estimation of emissions from specific waste products disposed in municipal solid waste landfills in European countries for use in the inventory analysis of LCA. Examples of input data (e.g. distribution of the waste product in different countries, composition of the product and physical/chemical/biological properties of waste product components) and output data (e.g. estimated emissions to atmosphere and water) are given for a fictive waste product made of representative types of components (toluene, cellulose, polyvinylchloride (PVC), copper and chloride). Since waste products from different processes in the product system may be disposed at different landfills where they are mixed with waste originating outside the product system, the estimated emissions from specific waste products cannot be compared with measured emissions from true landfills. Hence, the computer tool is verified in terms of mass balances and sensitivity analyses. The mass balances agree exactly and the sensitivity analyses show that different types of waste product components behave differently in different types of landfills. Emission of e.g. toluene is significantly reduced in the presence of landfill top-cover, landfill gas combustion units and leachate treatment units. Generally, the sensitivity analysis shows good agreement between the relative proportions of various types of emissions (based on properties of the waste and properties of landfills) and good agreement with emission levels that would be expected based on a general understanding of landfill processes.     

Alternative methods for determining anaerobic biodegradability: A review

The characterization of solid wastes is a necessary step before they can be used in anaerobic digestion. The quantities of different compounds (carbohydrates, proteins, lipids and fibers) and anaerobic biodegradability (capacity to produce methane) are important information required to characterize waste. The Biochemical Methane Potential (BMP) test is one of the most relevant tests for assessing the biodegradability of waste materials. The BMP test is run under anaerobic conditions, using bacteria populations, which makes it very time consuming, i.e., about 30 days. This paper presents alternative methods for determining the anaerobic biodegradability of solid waste. First, we describe the already existing tests for characterizing organic matter. Then we correlate an aerobic test with an anaerobic test in order to estimate anaerobic biodegradability and biogas production. This shortens the analysis time to 5 days. Models using physico-chemical characteristics as input data (total carbohydrate, total nitrogen, fiber, etc.) can predict the amount of methane produced by correlation. Pyrolysis is a very fast analytical test that can be used to characterize solid waste. Lastly, spectroscopy techniques seem to be useful for determining biodegradability, in particular by taking into account the interaction between different molecules in the organic matter.     

The impact of landfilling and composting on greenhouse gas emissions – A review

Municipal solid waste is a significant contributor to greenhouse gas emissions through decomposition and life-cycle activities processes. The majority of these emissions are a result of landfilling, which remains the primary waste disposal strategy internationally. As a result, countries have been incorporating alternative forms of waste management strategies such as energy recovery from landfill gas capture, aerobic landfilling (aerox landfills), pre-composting of waste prior to landfilling, landfill capping and composting of the organic fraction of municipal solid waste. As the changing global climate has been one of the major environmental challenges facing the world today, there is an increasing need to understand the impact of waste management on greenhouse gas emissions. This review paper serves to provide an overview on the impact of landfilling (and its various alternatives) and composting on greenhouse gas emissions taking into account streamlined life cycle activities and the decomposition process. The review suggests greenhouse gas emissions from waste decomposition are considerably higher for landfills than composting. However, mixed results were found for greenhouse gas emissions for landfill and composting operational activities. Nonetheless, in general, net greenhouse gas emissions for landfills tend to be higher than that for composting facilities.     

Enhancement of biodegradability of disposable polyethylene in controlled biological soil

Plastics as polyethylene are widely used in packaging and other agricultural applications. They accumulate in the environment at a rate of 25 million tons per year. Thus, the development and use of degradable plastics was proposed as a solution for plastic waste problem. Because of the ever-increasing use of plastic films, nowadays, biodegradability has become a useful characteristic for plastics. Conversely, the introduction of biodegradable plastics has generated a need for methods to evaluate the biodegradation of these polymers in landfills and solid waste treatment systems such as composting or anaerobic digestion treatment plants. The purpose of this study was to investigate the biodegradation of disposable low-density polyethylene bags containing starch (12%), autoxidizable fatty acid ester and catalytic agents in soil. Structurally this work intended to evaluate the capacity of Phanerochaete chrysosporium (ATCC 34541) to enhance polyethylene film biodegradation in soil microcosms. Soil samples inoculated with P. chrysosporium were mixed with LDPE/starch blend films and biological changes of the films and soil were monitored for 6 months. The biodegradation of polyethylene starch blend film has been determined by the physical, chemical and biological properties of the samples such as pH, biomass, CO₂ formation, percentage elongation, relative viscosity and FTIR spectrum.     

The biofuel potential of municipal solid waste

The world in the 21st century is facing a dual crisis of increasing waste and global climate change. Substituting fossil fuels with waste biomass‐derived cellulosic ethanol is a promising strategy to simultaneously meet part of our energy needs, mitigate greenhouse gas (GHG) emissions, and manage municipal solid waste (MSW). However, the global potential of MSW as an energy source is as yet unquantified. Here, we report increasing trends of MSW generation, and waste biomass‐derived cellulosic ethanol potentials in relation to socio‐economic development across 173 countries, and show that globally, up to 82.9 billion litres of waste paper‐derived cellulosic ethanol can be produced worldwide, replacing 5.36% of gasoline consumption, with accompanying GHG emissions savings of between 29.2% and 86.1%.     

An in vivo evaluation of induction of abnormal sperm morphology in mice by landfill leachates

Although several reports have demonstrated the acutely toxic and genotoxic effects of landfill leachates in microbial organisms, plants and aquatic animals, the effects of pollutants present in these leachates have not been clarified yet in terrestrial animals. This study mainly aimed to evaluate a potential genetic effect of raw and simulated leachates from Orita-Aperin and Oworonsoki landfills in south-west Nigeria by use of the murine sperm-head abnormality test. These landfills neither have a synthetic membrane liner at the bottom, nor a natural layer of compacted soil with the desired hydraulic conductivity, nor a run-off control system. As a result, the leachates produced are discharged into the environment. Samples designated as Orita-Aperin Raw Leachate (OARL), Orita-Aperin Simulated Leachate (OASL), Oworonsoki Raw Leachate (OWRL) and Oworonsoki Simulated Leachate (OWSL) were analyzed in the sperm-head abnormality test at concentrations (v/v) of 1%, 2.5%, 5%, 10% and 25%. Mice were given 0.5 ml sample per day for five consecutive days by intraperitoneal injection. Each dose group comprised seven mice, and a 5-week exposure period was utilized. The data show that the test mixtures induced a dose-dependent, statistically significant increase (P<0.05) in the number of sperm with abnormal morphology. Physico-chemical analysis of the test samples shows that they contained constituents that are capable of inducing mutation in biologic system. The interaction of some of these constituents with the genetic material in the differentiating cells during spermatogenesis may be responsible for these observations. This is relevant in environmental waste management, and for the assessment of the hazardous effects of the chemicals in landfill leachates.     

Utilization of cellulosic materials through enzymatic hydrolysis. II. Preliminary assessment of an integrated processing scheme

An integrated processing scheme is described for the conversion of a cellulosic waste (newsprint) to sugars by enzymatic hydrolysis and then to ethanol and yeast by fermentation. The unconverted solids are burned to produce process energy requirements and surplus electrical power. Preliminary designs and cost studies are developed to provide a rough perspective on the potential economic feasibility of this method of cellulose utilization.     

A logistic model for the prediction of the influence of water on the solid waste methanization in landfills

This article deals with the impact of water content of solid waste on biogas production kinetics in landfills. This impact has been proved in the laboratory thanks to anaerobic biodegradation experiments on paper/cardboard waste samples. A strong dependence with the moisture level was observed for both kinetic rates and maximum methane production. In this article, a logistic model is proposed to simulate the biogas production rate. It is chosen as simple as possible in order to allow for a correct identification of the model parameters given the experimental data available. The moisture dependency is introduced through a linear weighing of the biomass specific growth rate and of the amount of accessible organic substrate. It is directly linked to physical properties of the waste: the holding capacity and the minimal moisture level allowing the presence of free water.     

Anaerobic degradation of phthalic acid esters during digestion of municipal solid waste under landfilling conditions

Anaerobic microorganisms in municipal solid waste samples from laboratory-scale landfill reactors and a pilot-plant biogas digestor were investigated with the aim of assessing their ability to transform four commercially used phthalic acid esters (PAEs) and phthalic acid (PA). The PAEs studied were diethyl phthalate (DEP), butylbenzyl phthalate (BBP), dibutyl phthalate (DBP) and bis(2-ethylhexyl) phthalate (DEHP). No biological transformation of DEHP could be detected in any of the experiments. Together with waste samples from the simulated landfilling conditions, the PAEs (except DEHP) were hydrolytically transformed to their corresponding monoesters. These accumulated as end products, and in most cases they were not further degraded. During incubation with waste from the biogas digestor, the PAEs (except DEHP) were completely degraded to methane and carbon dioxide. The influence of the landfill development phase on the transformations was investigated utilizing PA and DEP as model substances. We found that during both the intense and stable methanogenic (but not the acidogenic) phases, the microoganisms in the samples had the potential to transform PA. A shorter lag phase was observed for the PA transformation in the samples from the stable methanogenic phase as compared with earlier phases. This indicates an increased capacity to degrade PA during the aging phases of the municipal solid waste in landfills. No enhancement of the DEP transformation could be observed as conditions in the methanogenic landfill model changed over a year's time. The results indicate that microorganisms developing in a methanogenic landfill environment have a substantially lower potential to degrade PAEs compared with those developing in a biogas reactor.Abbreviations BBP butylbenzyl phthalate - DEHP bis(2-ethylhexyl) phthalate - CoA coenzyme A - DBP dibutyl phthalate - DEP diethyl phthalate - DS dry solids - MBeP monobenzyl phthalate - MBuP monobutyl phthalate - MEP monoethyl phthalate - MSW municipal solid waste - PA phthalic acid - PAE(s) phthalic acid ester(s) - VFA volatile fatty acids     

Anaerobic biodegradability of cellulose and hemicellulose in excavated refuse samples using a biochemical methane potential assay

Summary Improved techniques are needed to predict potential methane generation from refuse buried in landfills. The Biochemical Methane Potential (BMP) test was used to measure the methane potential of ten refuse samples excavated from a Berkeley, CA, landfill. The test was conducted in 125-ml serum bottles containing phosphate-buffered medium and inoculated with anaerobically digested sewage sludge. Comparison of the measured BMP to the theoretical BMP calculated from measured cellulose and hemicellulose concentrations indicated that cellulose plus hemicellulose is not well correlated with the measured BMP. The average of the measured to theoretical BMP was 19.1% (range 0–53%, s.d.=16.9%). Measured sulfate concentrations showed that sulfate was an insignificant electron sink in the samples tested. Once methane production from the refuse was complete, 0.072 g of Whatman no. 1 filter paper was added to two of the four serum bottles incubated for each sample. An average of 84.9% (s.d=2.5%) of the added filter paper was recovered as methane, suggesting that some cellulose and hemicellulose present in refuse is recalcitrant or otherwise not bioavailable.     

Direct fermentation of cellulose to ethanol by a cellulolytic filamentous fungus,Monilia sp.

Summary A saprophytic filamentous fungus, Monilia sp., isolated from bagasse compost was found to utilize many polysaccharides (including cellulose) and to produce cellulases and hemicellulases. Monilla sp. also fermented glucose, xylose and cellulosic materials to ethanol. Over 60% of the solid cellulose substrate added to Monilia sp. cultures was converted to ethanol as the major fermentation product. These results indicate that Monilia sp. is a potential organism for the direct conversion of cellulosic biomass to ethanol.     

Reactor scale up for biological conversion of cellulosic biomass to ethanol

The absence of a systematic scale-up approach for biological conversion of cellulosic biomass to commodity products is a significant bottleneck to realizing the potential benefits offered by such conversion. Motivated by this, we undertook to develop a scale-up approach for conversion of waste paper sludge to ethanol. Physical properties of the system were measured and correlations were developed for their dependence upon cellulose conversion. Just-suspension of solid particles was identified as the scale up criterion based on experiments at lab scale. The impeller speed for just solids suspension at large scale was predicted using computational fluid dynamics simulations. The scale-up strategy was validated by analyzing mixing requirements such as solid–liquid mass transfer under the predicted level of agitation at large scale. The scale-up approach enhances the prediction of reactor performance and helps provide guidelines for the analysis and design of large scale bioreactors based on bench scale experimentation.     

The potential of cellulases and cellulosomes for cellulosic waste management

Lignocellulose is the most abundant plant cell wall component of the biosphere and the most voluminous waste produced by our society. Fortunately, it is not toxic or directly harmful, but our major waste disposal facilities--the landfills--are rapidly filling up with few realistic alternatives. Because cellulose is pure glucose, its conversion to fine products or fuels has remained a romantic and popular notion; however, the heterogeneous and recalcitrant nature of cellulosic waste presents a major obstacle for conventional conversion processes. One paradigm for the conversion of biomass to products in nature relies on a multienzyme complex, the cellulosome. Microbes that produce cellulosomes convert lignocelluose to microbial cell mass and products (e.g. ethanol) simultaneously. The combination of designer cellulosomes with novel production concepts could in the future provide the breakthroughs necessary for economical conversion of cellulosic biomass to biofuels.     

垃圾填埋场N2O排放通量及测定方法研究进展

氧化亚氮(N₂O)是第三大温室气体和最主要的臭氧层破坏气体.填埋是目前城市生活垃圾处理处置的主要方式,而垃圾填埋场是N₂O的排放源之一.实验室研究和现场测定均表明,生活垃圾填埋场可以有高的N₂O释放通量,但不同填埋场测定数据差异很大.目前,对生活垃圾填埋场N₂O排放量的原位准确测定以及排放机理和重要性的认识仍有很多不足.本文概述了生活垃圾填埋场N₂O排放研究现状,从垃圾堆体和覆土层两部分探讨了传统厌氧卫生填埋场的N₂O产生和排放机理,并就此对新型脱氮型生物反应器填埋场做了相应探讨.最后,就静态箱法、涡度相关法等N₂O通量测定方法在填埋场的适用性进行了讨论,并展望了填埋场N₂O排放的研究方向.     

A multi-criteria ranking of different technologies for the anaerobic digestion for energy recovery of the organic fraction of municipal solid wastes

This paper describes a conceptual framework and methodological tool developed for the evaluation of different anaerobic digestion technologies suitable for treating the organic fraction of municipal solid waste, by introducing the multi-criteria decision support method Electre III and demonstrating its related applicability via a test application. Several anaerobic digestion technologies have been proposed over the last years; when compared to biogas recovery from landfills, their advantage is the stability in biogas production and the stabilization of waste prior to final disposal. Anaerobic digestion technologies also show great adaptability to a broad spectrum of different input material beside the organic fraction of municipal solid waste (e.g. agricultural and animal wastes, sewage sludge) and can also be used in remote and isolated communities, either stand-alone or in conjunction to other renewable energy sources. Main driver for this work was the preliminary screening of such methods for potential application in Hellenic islands in the municipal solid waste management sector. Anaerobic digestion technologies follow different approaches to the anaerobic digestion process and also can include production of compost. In the presented multi-criteria analysis exercise, Electre III is implemented for comparing and ranking 5 selected alternative anaerobic digestion technologies. The results of a performed sensitivity analysis are then discussed. In conclusion, the performed multi-criteria approach was found to be a practical and feasible method for the integrated assessment and ranking of anaerobic digestion technologies by also considering different viewpoints and other uncertainties of the decision-making process.     

Arsenic-Rich Iron Floc Deposits in Seeps Downgradient of Solid Waste Landfills

Iron flocculate or “floc” deposits are commonly observed in groundwater discharge zones downgradient of unlined solid waste landfills. Bright orange in color, and composed predominantly of amorphous iron oxyhydroxides, these deposits generally have been regarded as aesthetically undesirable but environmentally benign. In recent years, there has been increased awareness of the widespread occurrence of elevated arsenic in reducing groundwaters. Research carried out at municipal landfills in New England indicates that naturally occurring arsenic exhibits redox-mediated mobility and is frequently associated with reduced iron as a dissolved constituent in leachate-impacted groundwaters. If iron precipitates in discharge zones where reduced groundwaters are exposed to atmospheric oxygen, it follows that arsenic may co-precipitate with iron in these areas. To assess the prevalence of arsenic as a constituent of iron floc deposits, samples were collected at seven landfills and at one natural mineral spring in the lower Hudson Valley of southeastern New York State. At six of seven landfill sites, arsenic concentrations exceeded 33 mg/kg, which represents the “severe effects level” for aquatic life as identified in New York State regulatory guidance for screening contaminated sediments. These results indicate that arsenic contamination is of potential concern for downgradient of landfills wherever iron-stained leachate discharges are observed. Sampling and analysis of iron flocs associated with such leachates could also provide a means of identifying landfills that may present risks of arsenic contamination to downgradient water supply wells, especially in cases where groundwater monitoring wells are not available for sampling.     

Cross-sectional analysis of the polysaccharide composition in cellulosic fiber materials by enzymatic peeling/high-performance capillary zone electrophoresis

A combined enzymatic, chemical, and analytical approach was used to determine the cross-sectional carbohydrate composition in cellulosic fibers. The outer surface of cellulosic fibers was enzymatically removed layer-by-layer with precise quantitative control, and the monosaccharides in the peelings were subsequently analyzed by high-performance capillary electrophoresis (HPCE) after precolumn derivatization with a UV label. This method was applied to dissolving pulps and regenerated cellulose fibers, with special emphasis on the cross-sectional distribution of hemicelluloses. Commercially available enzyme solutions were used, resulting in a reproducible peeling. Significant differences were found in the hemicellulose distribution across the fiber of different dissolving pulps, dependent on both natural source (beech or spruce) and preparation process (acidic sulfite cook or prehydrolysis kraft cook). Among the dissolving pulps, beech prehydrolysis kraft pulp showed the highest enrichment of surface xylan. Similar, albeit smaller, differences were noticed between various regenerated fibers (viscose, viscose Modal, and Lyocell): a thin hemicellulose-rich outermost layer was found in all the regenerated fibers studied.     

Directed Evolution of Clostridium phytofermentans Glycoside Hydrolase Family 9 Endoglucanase for Enhanced Specific Activity on Solid Cellulosic Substrate

Increasing specific activity of cellulase on solid cellulosic materials would be among the top priorities for second-generation biorefineries. However, the complicated relationship among the heterogeneity of solid cellulosic materials and different action mode cellulase components results in great challenges in cellulase engineering. We applied directed evolution to a Clostridium phytofermentans ISDg glycoside hydrolase family 9 processive endoglucanase (CpCel9) for enhanced hydrolytic performance by using Bacillus subtilis as a host for cloning and expression. Several CpCel9 mutants with both increased expression level and enhanced specific activity on the solid cellulosic material were obtained. The most active mutant, which also exhibits an increased expression level, had more than threefold specific activity than that of wild type on regenerated amorphous cellulose. Most mutation sites were located in the family 3 cellulose-binding module near to its catalytic module, which might guide the entrance of glucan into the catalytic module. This study suggested that directed evolution by combining B. subtilis secretory protein expression host and solid cellulosic substrates would be a powerful tool to evolve more active cellulase mutants for cost-effective biosaccharification process.     

Anaerobic solubilisation of nitrogen from municipal solid waste (MSW)

This paper reviews anaerobic solubilisation of nitrogen municipal solid waste (MSW) and the effect of current waste management practises on nitrogen release. The production and use of synthetically fixed nitrogen fertiliser in food production has more than doubled the flow of excessive nitrogenous material into the community and hence into the waste disposal system. This imbalance in the global nitrogen cycle has led to uncontrolled nitrogen emissions into the atmosphere and water systems. The nitrogen content of MSW is up to4.0% of total solids (TS) and the proteins in MSW have a lower rate of degradation than cellulose. The proteins are hydrolysed through multiple stages into amino acids that are further fermented into volatile fatty acids, carbon dioxides, hydrogen gas, ammonium and reduced sulphur. Anaerobic digestion of MSW putrescibles could solubilise around 50% of the nitrogen. Thus, the anaerobic digestion of putrescibles may become an important method of increasing the rate of nitrogen recycling back to the ecosystem. A large proportion of the nitrogen in MSW continues to end up inland fills; for example, in the EU countries around 2 million tonnes of nitrogen is disposed of annually this way. Nitrogen concentration in the leachates of existing landfills are likely to remain at a high level for decades to come. Under present waste management practices with a relatively low level of efficiency in the source segregation or mechanical sorting of putrescibles from grey waste and with a low level of control over landfill operating procedures, nitrogen solubilisation from landfilled waste will take at least a century. This revised version was published online in June 2006 with corrections to the Cover Date.     

Product specific emissions from municipal solid waste landfills

For the inventory analysis of environmental impacts associated with products in Life Cycle Assessment (LCA) there is a great need for estimates of emissions from waste products disposed at municipal solid waste landfills (product specific emissions). Since product specific emissions can not be calculated or measured directly at the landfills, they must be estimated by modeling of landfill processes. This paper presents a landfill model based on a large number of assumptions and approximations concerning landfill properties, waste product properties and characteristics of various kinds of environmental protection systems (e.g. landfill gas combustion units and leachate treatment units). The model is useful for estimation of emissions from waste products disposed in landfills and it has been made operational in the computer tool LCA-LAND presented in a following paper. In the model, waste products are subdivided into five groups of components: general organic matter (e.g. paper), specific organic compounds (e.g. organic solvents), inert components (e.g. PVC), metals (e.g. cadmium), and inorganic non-metals (e.g. chlorine,) which are considered individually. The assumptions and approximations used in the model are to the extent possible scientifically based, but where scientific information has been missing, qualified estimates have been made to fulfill the aim of a complete tool for estimation of emissions. Due to several rough simplifications and missing links in our present understanding of landfills, the uncertainty associated with the model is relatively high.