Cy5 labeled antimicrobial peptides for enhanced detection of Escherichia coli O157:H7

Fluorescently labeled antimicrobial peptides were evaluated as a potential replacement of labeled antibodies in a sandwich assay for the detection of Escherichia coli O157:H7. Antimicrobial peptides naturally bind to the lipopolysaccharide component of bacterial cell walls as part of their mode of action. Because of their small size relative to antibodies peptides can bind to cell surfaces with greater density, thereby increasing the optical signal and improving sensitivity. This method combines the specificity of a capture antibody with the increased sensitivity provided by using a labeled peptide as a detection molecule. The antimicrobial peptides cecropin P1, SMAP29, and PGQ were labeled with the fluorescent dye Cy5 via maleimide linker chemistry. Preliminary screening using a whole-cell solution binding assay revealed that Cy5 cecropin P1 enhanced the detection of E. coli O157:H7 relative to a Cy5 labeled anti-E. coli O157:H7 antibody 10-fold. Detection sensitivity of antibody and peptide were also compared with a prototype immuno-magnetic bead biosensor. Detection using Cy5 cecropin P1 resulted in a 10-fold improvement in sensitivity. Correlation of peptide antimicrobial activity with detection of E. coli O157:H7 indicated that activity was not predictive of the sensitivity of the fluorescent assay.     

Redirecting lipoic acid ligase for cell surface protein labeling with small-molecule probes

Live cell imaging is a powerful method to study protein dynamics at the cell surface, but conventional imaging probes are bulky, or interfere with protein function, or dissociate from proteins after internalization. Here, we report technology for covalent, specific tagging of cellular proteins with chemical probes. Through rational design, we redirected a microbial lipoic acid ligase (LplA) to specifically attach an alkyl azide onto an engineered LplA acceptor peptide (LAP). The alkyl azide was then selectively derivatized with cyclo-octyne conjugates to various probes. We labeled LAP fusion proteins expressed in living mammalian cells with Cy3, Alexa Fluor 568 and biotin. We also combined LplA labeling with our previous biotin ligase labeling, to simultaneously image the dynamics of two different receptors, coexpressed in the same cell. Our methodology should provide general access to biochemical and imaging studies of cell surface proteins, using small fluorophores introduced via a short peptide tag.     

Detection of recombinant Pseudomonas putida in the wheat rhizosphere by fluorescence in situ hybridization targeting mRNA and rRNA

A method was developed to detect a specific strain of bacteria in wheat root rhizoplane using fluorescence in situ hybridization and confocal microscopy. Probes targeting both 23S rRNA and messenger RNA were used simultaneously to achieve detection of recombinant Pseudomonas putida (TOM20) expressing toluene o-monooxygenase (tom) genes and synthetic phytochelatin (EC20). The probe specific to P. putida 23S rRNA sequences was labeled with Cy3 fluor, and the probe specific to the tom genes was labeled with Alexa647 fluor. Probe specificity was first determined, and hybridization temperature was optimized using three rhizosphere bacteria pure cultures as controls, along with the P. putida TOM20 strain. The probes were highly specific to the respective targets, with minimal non-specific binding. The recombinant strain was inoculated into wheat seedling rhizosphere. Colonization of P. putida TOM20 was confirmed by extraction of root biofilm and growth of colonies on selective agar medium. Confocal microscopy of hybridized root biofilm detected P. putida TOM20 cells emitting both Cy3 and Alexa647 fluorescence signals.     

Immunofluorescence signal amplification by the enzyme-catalyzed deposition of a fluorescent reporter substrate (CARD)

Progress has been made in improving the immunohistochemical detection of antigens for imaging and flow cytometry. We report the synthesis of a novel fluorescent horseradish peroxidase substrate, Cy3.29-tyramide, and its application in an enzyme-based signal amplification system, catalyzed reporter deposition (CARD). The catalyzed deposition of Cy3.29-tyramide was used to detect cell surface markers such as CD8 and CD25 on tonsil tissue and human lymphocytes. We compared the fluorescence CARD method to standard indirect immunofluorescence detection methods and found that an amplification of up to 15-fold was possible with CARD. The detection of the intracellular protein myosin II in fibroblastic cells and rabbit serum proteins blotted onto nitrocellulose was also improved. Thus, fluorescent CARD is a simple modification that can be made to standard immunofluorescence staining protocols to enhance significantly the detection of antigens.     

2D differential in-gel electrophoresis for the identification of esophageal scans cell cancer-specific protein markers

The reproducibility of conventional two-dimensional (2D) gel electrophoresis can be improved using differential in-gel electrophoresis (DIGE), a new emerging technology for proteomic analysis. In DIGE, two pools of proteins are labeled with 1-(5-carboxypentyl)-1'-propylindocarbocyanine halide (Cy3) N-hydroxy-succinimidyl ester and 1-(5-carboxypentyl)-1'-methylindodi-carbocyanine halide (Cy5) N-hydroxysuccinimidyl ester fluorescent dyes, respectively. The labeled proteins are mixed and separated in the same 2D gel. 2D DIGE was applied to quantify the differences in protein expression between laser capture microdissection-procured esophageal carcinoma cells and normal epithelial cells and to define cancer-specific and normal-specific protein markers. Analysis of the 2D images from protein lysates of approximately 250,000 cancer cells and normal cells identified 1038 protein spots in cancer cell lysates and 1088 protein spots in normal cell lysates. Of the detected proteins, 58 spots were up-regulated by >3-fold and 107 were down-regulated by >3-fold in cancer cells. In addition to previously identified down-regulated protein annexin I, tumor rejection antigen (gp96) was found up-regulated in esophageal squamous cell cancer. Global quantification of protein expression between laser capture-microdissected patient-matched cancer cells and normal cells using 2D DIGE in combination with mass spectrometry is a powerful tool for the molecular characterization of cancer progression and identification of cancer-specific protein markers.     

Simple and effective method for generating single-stranded DNA targets and probes

A simple and efficient PCR method was developed for generating dye- or radiolabeled single-stranded DNA targets or probes used for hybridization studies. The method involved the use of a pair of long primers with high annealing temperatures and a short, labeled primer with a low annealing temperature in a PCR consisting of two cycles at different temperatures. We used this method to generate dye Cy 5-labeled and [32P]-radiolabeled single-stranded DNA targets and probes. These labeled probes were used successfully for the microarray identification of point mutations in Mycobacterium tuberculosis genes and for the Northern blot detection of expression changes of the GATA-2 gene in Pneumocystis carinii-infected rat lungs.     

双向凝胶电泳中三种蛋白质检测方法的比较

高通量双向电泳是蛋白质组学的核心 ,双向电泳凝胶上蛋白质点的检测方法应具有灵敏度高、线性范围宽和兼容质谱鉴定等优点 .采用差异凝胶电泳 (differencegelelectrophoresis ,DIGE)技术以Cy3(1 (5 carboxypentyl) 1′ propylindocarbocyaninehalideN hydroxysuccinimidylester)和Cy5 (1 (5 carboxypentyl) 1′ methylindodicarbocyaninehalideN hydroxysuccinimidylester)荧光分别标记正常和TNF α处理细胞的蛋白质 ,用Cy2 (3 (4 carboxymethyl)phenylmethyl) 3′ ethyloxacarbocyaninehalideN hydroxysuccinimidylester)荧光标记正常和TNF α处理细胞蛋白质的等量混合样品作为内标 ,混合 3种荧光标记的蛋白质后 ,在同一等电聚焦胶条进行聚焦 ,然后在聚丙烯酰胺凝胶上进行第二向电泳 ,用 3种波长的激光激发扫描得到凝胶图象 ,DIGE中多个样品在同一条件下电泳 ,因而匹配率高 ,且引入内标使蛋白质点的检测与定量更为准确 .DIGE技术与质谱相结合 ,实现了高通量和相对准确定量 .与硝酸银和考马斯亮蓝染色结果相比较 ,DIGE技术具有灵敏度高、线性范围宽和不影响后续质谱鉴定等优点     

Cy5 total protein normalization in Western blot analysis

Western blotting is a widely used method for analyzing specific target proteins in complex protein samples. Housekeeping proteins are often used for normalization to correct for uneven sample loads, but these require careful validation since expression levels may vary with cell type and treatment. We present a new, more reliable method for normalization using Cy5-prelabeled total protein as a loading control. We used a prelabeling protocol based on Cy5 N-hydroxysuccinimide ester labeling that produces a linear signal response. We obtained a low coefficient of variation (CV) of 7% between the ratio of extracellular signal-regulated kinase (ERK1/2) target to Cy5 total protein control signals over the whole loading range from 2.5 to 20.0 μg of Chinese hamster ovary cell lysate protein. Corresponding experiments using actin or tubulin as controls for normalization resulted in CVs of 13 and 18%, respectively. Glyceraldehyde-3-phosphate dehydrogenase did not produce a proportional signal and was not suitable for normalization in these cells. A comparison of ERK1/2 signals from labeled and unlabeled samples showed that Cy5 prelabeling did not affect antibody binding. By using total protein normalization we analyzed PP2A and Smad2/3 levels with high confidence.     

Differential activity-based gel electrophoresis for comparative analysis of lipolytic and esterolytic activities

We established a novel technique for differential activity-based gel electrophoresis (DABGE) of lipolytic enzymes from two different biological samples. For this purpose, a set of three fluorescent suicide inhibitors was developed. These probes possess the same substrate analogous structures but carry different cyanine dyes (Cy2b, Cy3, and Cy5) as reporter fluorophores. For comparison of enzyme profiles, two samples are individually labeled with a different probe followed by mixing, gel electrophoresis, fluorescence imaging, and identification of the tagged proteins by MS/MS. Protocols for quantitative determination of active enzymes were developed on the basis of lipolytic proteomes that had been admixed with defined amounts of known lipases and esterases. A detailed analysis of the fluorescence intensities showed that the found enzyme ratios very closely reflected the relative amounts of the labeled enzymes that were used for spiking. The DABGE method was used to compare the lipolytic proteomes of brown and white adipose tissue showing specific enzyme patterns of both samples. This study represents the first application of this technology for comparative analysis of lipases and esterases. Further applications of this technique can be expected to provide entirely new information on lipid enzymology in health and disease with high precision.     

Bacterial Species Determination from DNA-DNA Hybridization by Using Genome Fragments and DNA Microarrays

Whole genomic DNA-DNA hybridization has been a cornerstone of bacterial species determination but is not widely used because it is not easily implemented. We have developed a method based on random genome fragments and DNA microarray technology that overcomes the disadvantages of whole-genome DNA-DNA hybridization. Reference genomes of four fluorescent Pseudomonas species were fragmented, and 60 to 96 genome fragments of approximately 1 kb from each strain were spotted on microarrays. Genomes from 12 well-characterized fluorescent Pseudomonas strains were labeled with Cy dyes and hybridized to the arrays. Cluster analysis of the hybridization profiles revealed taxonomic relationships between bacterial strains tested at species to strain level resolution, suggesting that this approach is useful for the identification of bacteria as well as determining the genetic distance among bacteria. Since arrays can contain thousands of DNA spots, a single array has the potential for broad identification capacity. In addition, the method does not require laborious cross-hybridizations and can provide an open database of hybridization profiles, avoiding the limitations of traditional DNA-DNA hybridization.     

Comparison of different labeling methods for the production of labeled target DNA for microarray hybridization

Different labeling methods were studied to compare various approaches to the preparation of labeled target DNA for microarray experiments. The methods under investigation included a post-PCR labeling method using the Klenow fragment and a DecaLabel DNA labeling kit, the use of a Cy3-labeled forward primer in the PCR, generating either double-stranded or single-stranded PCR products, and the incorporation of Cy3-labeled dCTPs in the PCR. A microarray that had already been designed and used for the detection of microorganisms in compost was used in the study. PCR products from the organisms Burkholderia cepacia and Staphylococcus aureus were used in the comparison study, and the signals from the probes for these organisms analyzed. The highest signals were obtained when using the post-PCR labeling method, although with this method, more non-specific hybridizations were found. Single-stranded PCR products that had been labeled by the incorporation of a Cy3-labeled forward primer in the PCR were found to give the next highest signals upon hybridization for a majority of the tested probes, with less non-specific hybridizations. Hybridization with double-stranded PCR product labeled with a Cy3-labeled forward primer, or labeled by the incorporation of Cy3-labeled dCTPs resulted in acceptable signal to noise ratios for all probes except the UNIV 1389a and Burkholderia genus probes, both located toward the 3' end of the 16S rRNA gene. The comparison of the different DNA labeling methods revealed that labeling via the Cy3-forward primer approach is the most appropriate of the studied methods for the preparation of labeled target DNA for our purposes.     

Single laser three color immunofluorescence staining procedures based on energy transfer between phycoerythrin and cyanine 5.

Monoclonal antibodies specific for phycoerythrin (PE) were covalently labeled with the fluorescent dye cyanine 5 (Cy5). Excitation at 488 nm of immune complexes obtained by mixing Cy5-anti-PE with PE resulted in a 4-fold reduction of PE fluorescence measured at 565 nm and an increase of fluorescence measured at 655 nm. The observed energy transfer between PE and Cy5-anti-PE was used to develop three color immunofluorescence staining procedures for flow cytometers equipped with an Argon laser tuned at 488 nm. Mouse IgG1 monoclonal antibodies specific for cell surface antigens were cross-linked with either unlabeled or Cy5 labeled mouse IgG1 anti-PE using F(ab')2 fragments of monoclonal rat anti-mouse IgG1. PE was added to these immune complexes in sufficient amounts to saturate all PE binding sites. Cells were incubated with PE-labeled and PE/Cy5-labeled tetrameric antibody complexes together with FITC labeled antibodies and analyzed by flow cytometry. The emission from FITC, PE and PE/Cy5 could be readily separated and bright three color immunofluorescence staining of mononuclear cells from human peripheral blood and bone marrow was observed. The results of these experiments demonstrate that useful probes for single laser three color staining of cell surface antigens can be readily obtained by mixing of selected reagents. Compared to standard procedures for the covalent labeling of PE (tandem) molecules to antibodies, the non-covalent procedures described in this report provide significant advantages in terms of the amount of reagents, time and equipment required to obtain suitable reagents for three color immunofluorescence staining.     

Single molecule DNA sequencing in submicrometer channels: state of the art and future prospects

We demonstrate a new method for single molecule DNA sequencing which is based upon detection and identification of single fluorescently labeled mononucleotide molecules degraded from DNA-strands in a cone shaped microcapillary with an inner diameter of 0.5 microm. The DNA was attached at an optical fiber via streptavidin/biotin binding and placed approximately 50 microm in front of the detection area inside of the microcapillary. The 5'-biotinylated 218-mer model DNA sequence used in the experiments contained 6 fluorescently labeled cytosine and uridine residues, respectively, at well defined positions. The negatively charged mononucleotide molecules were released by addition of exonuclease I and moved towards the detection area by electrokinetic forces. Adsorption of mononucleotide molecules onto the capillary walls as well as the electroosmotic (EOF) flow was prevented by the use of a 3% polyvinyl pyrrolidone (PVP) matrix containing 0.1% Tween 20. For efficient excitation of the labeled mononucleotide molecules a short-pulse diode laser emitting at 638 nm with a repetition rate of 57 MHz was applied. We report on experiments where single-stranded model DNA molecules each containing 6 fluorescently labeled dCTP and dUTP residues were attached at the tip of a fiber, transferred into the microcapillary and degraded by addition of exonuclease I solution. In one experiment, the exonucleolytic cleavage of 5-6 model DNA molecules was observed. 86 photon bursts were detected (43 Cy5-dCMP and 43 MR121-dUMP) during 400 s and identified due to the characteristic fluorescence decay time of the labels of 1.43+/-0.19 ns (Cy5-dCMP), and 2.35+/-0.29 ns (MR121-dUMP). The cleavage rate of exonuclease I on single-stranded labeled DNA molecules was determined to 3-24 Hz under the applied experimental conditions. In addition, the observed burst count rate (signals/s) indicates nonprocessive behavior of exonuclease I on single-stranded labeled DNA.     

Bacterial species determination from DNA-DNA hybridization by using genome fragments and DNA microarrays

Whole genomic DNA-DNA hybridization has been a cornerstone of bacterial species determination but is not widely used because it is not easily implemented. We have developed a method based on random genome fragments and DNA microarray technology that overcomes the disadvantages of whole-genome DNA-DNA hybridization. Reference genomes of four fluorescent Pseudomonas species were fragmented, and 60 to 96 genome fragments of approximately 1 kb from each strain were spotted on microarrays. Genomes from 12 well-characterized fluorescent Pseudomonas strains were labeled with Cy dyes and hybridized to the arrays. Cluster analysis of the hybridization profiles revealed taxonomic relationships between bacterial strains tested at species to strain level resolution, suggesting that this approach is useful for the identification of bacteria as well as determining the genetic distance among bacteria. Since arrays can contain thousands of DNA spots, a single array has the potential for broad identification capacity. In addition, the method does not require laborious cross-hybridizations and can provide an open database of hybridization profiles, avoiding the limitations of traditional DNA-DNA hybridization.     

Cryptomonad algal phycobiliproteins as fluorochromes for extracellular and intracellular antigen detection by flow cytometry

BACKGROUND: Phycobiliproteins play an important role in fluorescent labeling, particularly for flow cytometry. The spectral properties of R-phycoerythrin (R-PE) and allophycocyanin (APC) have made them the dominant reagents in this class of fluorochromes. In this study, we evaluate a lesser-known but potentially important series of low-molecular weight cryptomonad-derived phycobiliproteins (commercially termed the CryptoFluortrade mark dyes) for their applicability to flow cytometry, both in extracellular and intracellular labeling applications. METHODS: Several cell lines were labeled with biotin-conjugated antibodies against expressed extracellular surface proteins, followed by streptavidin conjugates of three cryptomonad phycobiliproteins (CryptoFluor-2, CryptoFluor-4, and CryptoFluor-5). Cells were then analyzed by flow cytometry using a variety of laser lines and emission filters to establish the optimal excitation/emission characteristics for each fluorochrome. Some cells were permeabilized and labeled for intracellular antigens, also using the cryptomonad fluorochromes. Where appropriate, parallel samples were labeled with other fluorochromes (including R-PE, APC, the cyanin dyes Cy3 and Cy5, and others) to gauge the performance of the cryptomonad fluorochromes against fluorescent labels previously evaluated for flow cytometry. RESULTS: CryptoFluor-2 possessed excitation/emission maxima similar to those of APC and Cy5, with good excitation in the red (HeNe laser 632 nm) and strong emission in the far red (660 nm). CryptoFluor-4 possessed excitation/emission maxima similar to those of Cy3, with optimal excitation in the green (Kr 530 nm) and strong emission in the yellow/orange (585 nm). CryptoFluor-5 possessed excitation/emission maxima similar to those of lissamine rhodamine, with optimal excitation in the yellow (Kr 568 nm) and emission in the orange (610 nm). All cryptomonad fluorochromes gave satisfactory results for both intracellular and extracellular labeling, with detection sensitivities that were comparable or better than traditional phycobiliproteins and low- molecular weight synthetic fluorochromes such as the cyanin dyes. CONCLUSIONS: The CryptoFluor fluorochromes were applicable to flow cytometric immunodetection, with excitation and emission conditions commonly found on multilaser instruments. Performance of several of these dyes was at least comparable to existing fluorescent labels. The low molecular weights (30-60 kd) of phycobiliproteins may make them particularly useful in intracellular antigen detection. Cytometry 44:16-23, 2001. Published 2001 Wiley-Liss, Inc.     

Detection of in situ labeled cell surface proteins by mass spectrometry: application to the membrane subproteome of human mammary epithelial cells

Characterization of the surface exposed membrane subproteome of human mammary epithelial cells (strain 184 A1L5) implemented lysine specific in situ labeling of the proteins using sulfosuccinimidyl-6-(biotinamido)hexanoate, followed by enrichment of the biotinylated, tryptically digested peptides, and then liquid chromatography-tandem mass spectrometry analysis of the labeled peptides. Probing the membrane subproteome in this manner yielded unambiguous identification of proteins situated on the cell surface. The method reported can be adapted to include stable isotope labeling of proteins for quantitation of changes occurring on the cell surface in response to specific perturbations.     

Autoantigen Microarray for High-throughput Autoantibody Profiling in Systemic Lupus Erythematosus

Systemic lupus erythematosus(SLE) is a complex autoimmune disease characterized by the production of autoantibodies to a broad range of self-antigens. Profiling the autoantibody repertoire using array-based technology has emerged as a powerful tool for the identification of biomarkers in SLE and other autoimmune diseases. Proteomic microarray has the capacity to hold large number of self-antigens on a solid surface and serve as a high-throughput screening method for the determination of autoantibody specificities. The autoantigen arrays carrying a wide variety of self-antigens, such as cell nuclear components(nucleic acids and associated proteins), cytoplasmic proteins, phospholipid proteins, cell matrix proteins, mucosal/secreted proteins, glomeruli, and other tissue-specific proteins, have been used for screening of autoantibody specificities associated with different manifestations of SLE. Arrays containing synthetic peptides and molecular modified proteins are also being utilized for identification of autoantibodies targeting to special antigenic epitopes. Different isotypes of autoantibodies, including Ig G, Ig M, Ig A, and Ig E, as well as other Ig subtypes, can be detected simultaneously with multi-color labeled secondary antibodies. Serum and plasma are the most common biologic materials for autoantibody detection, but other body fluids such as cerebrospinal fluid, synovial fluid, and saliva can also be a source of autoantibody detection.Proteomic microarray as a multiplexed high-throughput screening platform is playing an increasingly-important role in autoantibody diagnostics.In this article,we highlight the use of autoantigen microarrays for autoantibody exploration in SLE.     

Study of lipid rafts by gel filtration combined with preliminary staining with fluorescently labeled antibodies

A novel procedure for detecting raft-associated proteins by gel filtration was developed. Cells were stained with fluorescently labeled protein-specific antibodies, lyzed in a nonionic detergent and gel-filtered on Sepharose 4B. Proteins were identified with the help of fluorescently labeled antibodies. Staining of cells with fluorescently labeled antibodies prior to cell lysis significantly simplified the identification procedure. The potentialities of the new approach are demonstrated in the example of several surface proteins associated with lipid rafts either constitutively or in the course of cell activation.     

Molecular detection of Gluconacetobacter sacchari associated with the pink sugarcane mealybug Saccharicoccus sacchari (Cockerell) and the sugarcane leaf sheath microenvironment by FISH and PCR

Molecular tools for the detection of the newly described acetic acid bacterium Gluconacetobacter sacchari from the pink sugarcane mealybug, Saccharicoccus sacchari Cockerell (Homiptera: Pseudococcidae), and in the sugarcane leaf sheath microenvironment were developed. G. sacchari specific 16S rRNA-targeted oligonucleotide primers were designed and used in PCR amplification of G. sacchari DNA directly from mealybugs, and in a nested PCR to detect low numbers of the bacteria from sugarcane leaf sheath fluid and cane internode scrapings. A sensitivity level of detection of 40-400 cells/reaction was obtained using PCR from exponentially grown bacterial cultures and of 1-10 cells in cane internode scrapings and leaf sheath fluid samples using nested PCR. The specificity of the primer set was demonstrated by the lack of amplification product formation in PCR by closely related acetic acid bacteria, including Gluconacetobacter liquefaciens, and Gluconacetobacter diazotrophicus. A Cy3 labeled probe for G. sacchari was designed and shown to be specific for the species. Investigation of the mealybug microenvironment by whole cell fluorescent in situ hybridization revealed that G. sacchari appears to represent only a minor proportion of the population of the microbiota in the mealybugs tested. This study has shown the usefulness of 16S rRNA-based molecular tools in the identification and detection of G. sacchari from environmental samples and will allow these tools to be used in further ecological research.