Cleanup of industrial effluents containing heavy metals: a new opportunity of valorising the biomass produced by brewing industry

Heavy metal pollution is a matter of concern in industrialised countries. Contrary to organic pollutants, heavy metals are not metabolically degraded. This fact has two main consequences: its bioremediation requires another strategy and heavy metals can be indefinitely recycled. Yeast cells of Saccharomyces cerevisiae are produced at high amounts as a by-product of brewing industry constituting a cheap raw material. In the present work, the possibility of valorising this type of biomass in the bioremediation of real industrial effluents containing heavy metals is reviewed. Given the auto-aggregation capacity (flocculation) of brewing yeast cells, a fast and off-cost yeast separation is achieved after the treatment of metal-laden effluent, which reduces the costs associated with the process. This is a critical issue when we are looking for an effective, eco-friendly, and low-cost technology. The possibility of the bioremediation of industrial effluents linked with the selective recovery of metals, in a strategy of simultaneous minimisation of environmental hazard of industrial wastes with financial benefits from reselling or recycling the metals, is discussed.     

一株重金属高耐受菌的分离及鉴定

利用含不同浓度的重金属选择性培养基,对采集的微生物样本进行分离,并筛选出一株超高耐受重金属菌ZM-12。对ZM-12的16S rDNA高变区序列进行BLAST比较和MEGA 4.0分析,结果通过同源进化树分析表明该菌属于肠杆菌属（Enterobacter）。对该菌进行生理生化实验、最低抑菌浓度（MIC）的测定和火焰原子吸收实验,结果表明：ZM-12属于革兰氏阴性杆菌,在不同种类的重金属培养基中,其MIC值各不相同,Cu2+、Pb2+、Mn2+、Ni2+对ZM-12的MIC值分别为22.33 mmol/L、14.48 mmol/L、>200 mmol/L、58.69 mmol/L。通过火焰原子吸收的方法,测定了ZM-12对培养基中重金属的去除率,培养一定时间后,分别测定了溶液中重金属Pb2+、Mn2+、Cu2+、Ni2+的浓度,得到其最大去除率分别达到97.68%、99.93%、41.23%、99.46%。该菌株的发现及鉴定为重金属污染环境的治理提供了参考。     

Microbial biomass: an economical alternative for removal of heavy metals from waste water

Today indiscriminate and uncontrolled discharge of metal contaminated industrial effluents into the environment has become an issue of major concern. Heavy metals, being non-biodegradable and persistent, beyond a permissible concentration form unspecific compounds inside the cells thereby causing cellular toxicity. The only alternative to remove them from the wastewater is by immobilizing them. The conventional methods adopted earlier for this purpose included chemical precipitation, oxidation, reduction, filtration, electrochemical treatment, evaporation, adsorption and ion-exchange resins. These methods require high energy inputs especially when it refers to dilute solutions. Here microbial biomass offers an economical option for removing heavy metals by the phenomenon of biosorption. Non-living or dead biomass sequester metal(s) on their cell surface due to certain reactive groups available like carboxyl, amine, imidazole, phosphate, sulphydryl, sulfate and hydroxyl. The process can be made economical by procuring spent biomass from industry or naturally available bulk biomass. A batch or a continuous process of removal of heavy metals directly from effluents can be developed in a fixed bed reactor using the immobilized biomass. Further biosorption potential of the biomass can be improved by various physical and chemical treatments. The availability of variety of microbial biomass and their metal binding potential makes it a economical and sustainable option for developing effluent treatment process for removal and recovery of heavy metals.     

Impact of fluorides on the removal of heavy metals from an electroplating effluent using a flocculent brewer’s yeast strain of Saccharomyces cerevisiae

Abstract

Besides several toxic heavy metals, electroplating effluents can have in solution different cations and anions, which may influence heavy metals removal by the biomass. Among them, fluorides are commonly used in the electroplating industries and thus can be found in the respective wastewaters. In the present work, the effect of the presence of fluorides in the efficiency of chromium(III), copper(II) and nickel(II) removal, from an effluent, by heat-inactivated cells of a brewing flocculent strain of Saccharomyces cerevisiae was evaluated. The presence of fluorides severely decreased (>60%) the removal of chromium(III) by yeast biomass. This effect impaired the effective treatment of the effluent according to the US Environmental Protection Agency and the Portuguese law; conversely, a higher removal of copper(II) and nickel(II) was observed. This behaviour can be understood by metal speciation. In the presence of fluorides, chromium(III) was mainly complexed, becoming unavailable for yeast accumulation; this effect decreased the efficiency of chromium(III) removal. Thus, in the presence of fluorides, less chromium(III) is associated with biomass and consequently more yeast binding sites remain available for the uptake of other metals present in solution. This fact explains the increase of copper(II) and nickel(II) removal in the presence of fluorides.     

Removal of copper by Pseudomonas putida strain S4 isolated from copper mines

A bacterial strain, Pseudomonas putida S4, was isolated from smelter drainage of copper mines. The strain exhibited resistance to several heavy metals, like aluminium (Al), zinc (Zn), nickel (Ni), cobalt (Co) besides copper (Cu). Strain S4 could accumulate Cu from the Cu-supplemented growth medium. In the present study, we have demonstrated the Cu2+ removal capacity of this strain from various samples such as mine effluent, low-grade ore and ore-tailings, collected from the mining site. Moreover, approximately 80% of the accumulated Cu2+ could be recovered from the loaded biomass by a simple desorption procedure.     

絮凝基因内衔接重复序列与酵母菌絮凝特性多样性及遗传稳定性

存在于酵母菌细胞表面的絮凝蛋白与邻近细胞表面寡聚甘露糖链相互作用,从而使细胞相互聚集形成细胞团的生理过程称为酵母菌絮凝。编码絮凝蛋白的基因中存在大量衔接重复序列,这些重复序列的变化不但使酵母菌呈现出絮凝特性的多样性,而且由重复序列驱动的基因内或基因间重组使酵母菌的絮凝特性具有非常明显的遗传不稳定性。文中综述了基因内重复序列对酵母菌絮凝特性和遗传稳定性的影响,将为基于序列调控策略改进酵母菌絮凝特性及遗传稳定性奠定理论基础,为絮凝特性在发酵工业或环境修复过程中的可控应用提供新的解决策略。     

Biosorption of lead, cadmium, and zinc by Citrobacter strain MCM B-181: characterization studies

The biosorption process for removal of lead, cadmium, and zinc by Citrobacter strain MCM B-181, a laboratory isolate, was characterized. Effects of environmental factors and growth conditions on metal uptake capacity were studied. Pretreatment of biomass with chemical agents increased cadmium sorption efficiency; however, there was no significant enhancement in lead and zinc sorption capacity. Metal sorption by Citrobacter strain MCM B-181 was found to be influenced by the pH of the solution, initial metal concentration, biomass concentration, and type of growth medium. The metal sorption process was not affected by the age of the culture or change in temperature. Equilibrium metal sorption was found to fit the Langmuir adsorption model. Kinetic studies showed that metal uptake by Citrobacter strain MCM B-181 was a fast process, requiring <20 min to achieve >90% adsorption efficiency. The presence of cations reduced lead, zinc, and cadmium sorption to the extent of 11. 8%, 84.3%, and 33.4%, respectively. When biomass was exposed to multimetal solutions, metals were adsorbed in the order Co2+ < Ni2+ < Cd2+ < Cu2+ < Zn2+ < Pb2+. Among various anions tested, only phosphate and citrate were found to hamper metal sorption capacity of cells. Biosorbent beads prepared by immobilizing the Citrobacter biomass in polysulfone matrix exhibited high metal loading capacities. A new mathematical model used for batch kinetic studies was found to be highly useful in prediction of experimentally obtained metal concentration profiles as a function of time. Metal desorption studies indicated that Citrobacter beads could, in principle, be regenerated and reused in adsorption-desorption cycles. In an expanded scale trial, biosorbent beads were found to be useful in removal/recovery of metals such as lead from industrial wastewaters.     

Biosorption of lead(II), cadmium(II), copper(II) and nickel(II) by anaerobic granular biomass

Biosorption is potentially an attractive technology for treatment of wastewater for retaining heavy metals from dilute solutions. This study investigated the feasibility of anaerobic granules as a novel type of biosorbent, for lead, copper, cadmium, and nickel removal from aqueous solutions. Anaerobic sludge supplied from a wastewater treatment plant in the province of Quebec was used. Anaerobic granules are microbial aggregates with a strong, compact and porous structure and excellent settling ability. After treatment of the biomass with Ca ions, the cation exchange capacity of the biomass was approximately 111 meq/100 g of biomass dry weight which is comparable to the metal binding capacities of commercial ion exchange resins. This work investigated the equilibrium, batch dynamics for the biosorption process. Binding capacity experiments using viable biomass revealed a higher value than those for nonviable biomass. Binding capacity experiments using non-viable biomass treated with Ca revealed a high value of metals uptake. The solution initial pH value affected metal sorption. Over the pH range of 4.0-5.5, pH-related effects were not significant. Meanwhile, at lower pH values the uptake capacity decreased. Time dependency experiments for the metal ions uptake showed that adsorption equilibrium was reached almost 30 min after metal addition. It was found that the q(max) for Pb2+, Cd2+, Cu2+, and Ni2+ ions, were 255, 60, 55, and 26 mg/g respectively (1.23, 0.53, 0.87, and 0.44 mmol/g respectively). The data pertaining to the sorption dependence upon metal ion concentration could be fitted to a Langmiur isotherm model. Based on the results, the anaerobic granules treated with Ca appear to be a promising biosorbent for removal of heavy metals from wastewater due to its optimal uptake of heavy metals, its particulate shape, compact porous structure, excellent settling ability, and its high mechanical strength.     

Removal of heavy metals from water effluents using supermacroporous metal chelating cryogels

Applications of IDA in, for example, immobilized metal ion affinity chromatography for purification of His-tagged proteins are well recognized. The use of IDA as an efficient chelating adsorbent for environmental separations, that is, for the capture of heavy metals, is not studied. Adsorbents based on supermacroporous gels (cryogels) bearing metal chelating functionalities (IDA residues and ligand derived from derivatization of epoxy-cryogel with tris(2-aminoethyl)amine followed by the treatment with bromoacetic acid (defined as TBA ligand)) have been prepared and evaluated on capture of heavy metal ions. The cryogels were prepared in plastic carriers, resulting in desired mechanical stability and named as macroporous gel particles (MGPs). Sorption and desorption experiments for different metals (Cu2+, Zn2+, Cd2+, and Ni2+ with IDA adsorbent and Cu2+ and Zn2+ with TBA adsorbent) were carried out in batch and monolithic modes, respectively. Obtained capacities with Cu2+ were 74 μmol/mL (TBA) and 19 μmol/mL gel (IDA). The metal removal was higher for pH values between pH 3 and 5. Both adsorbents showed improved sorption at lower temperatures (10°C) than at higher (40°C) and the adsorption significantly dropped for the TBA adsorbent and Zn2+ at 40°C. Desorption of Cu2+ by using 1 M HCl and 0.1 M EDTA was successful for the IDA adsorbent whereas the desorption with the TBA adsorbent needs further attention. The result of this work has demonstrated that MGPs are potential treatment alternatives within the field of environmental separations and the removal of heavy metals from water effluents.     

以毒性鉴别评价法评价化工废水处理效果的研究

江苏省某化工厂废水处理设施进、出水经大型Sou（Daphnia magna）急性毒性试验的结果表明,废水在处理前、后均显示毒性。采用毒性鉴别评价的试验程序,对处理设施的进、出水进行了关键毒物的鉴别和评价。发现进水中存在的关键毒物为金属铜离子并共存多种金属和极性有机毒物,而出水中存在的毒物为酸性条件下易被氧化的有毒有机物。该废水处理工艺对废水毒性去除率为77.6%。由此可见,该处理工艺对金属离子有较好的去除,而对有毒有机化合物的去除效果不甚理想,因此,该厂生产工艺和废水处理工艺还有待进一步改进。     

基因工程菌大肠杆菌JM109富集废水中镍离子的研究

利用通过基因工程技术所构建的在细胞内同时表达出高特异性镍转运蛋白和金属硫蛋白的基因工程菌富集水体中的镍离子。菌体细胞对Ni²⁺的富集速率很快,富集过程满足Langmuir等温线模型。与原始宿主菌相比,经基因改造的基因工程菌不仅最大镍富集容量增加了5倍多,而且对pH值、离子强度的变化及其它共存重金属离子的影响都呈现出更强的适应性。相比而言,Na⁺、Ca²⁺、Cd²⁺、Pb²⁺的影响较小,但Mg²⁺、Hg²⁺和Cu²⁺所引起的负面效应较大。进一步的实验表明基因工程菌对Ni2+的富集行为不需要外加营养物质。     

Bioremediation of Heavy Metals in Liquid Media Through Fungi Isolated from Contaminated Sources

Wastewater particularly from electroplating, paint, leather, metal and tanning industries contain enormous amount of heavy metals. Microorganisms including fungi have been reported to exclude heavy metals from wastewater through bioaccumulation and biosorption at low cost and in eco-friendly way. An attempt was, therefore, made to isolate fungi from sites contaminated with heavy metals for higher tolerance and removal of heavy metals from wastewater. Seventy-six fungal isolates tolerant to heavy metals like Pb, Cd, Cr and Ni were isolated from sewage, sludge and industrial effluents containing heavy metals. Four fungi (Phanerochaete chrysosporium, Aspegillus awamori, Aspergillus flavus, Trichoderma viride) also were included in this study. The majority of the fungal isolates were able to tolerate up to 400 ppm concentration of Pb, Cd, Cr and Ni. The most heavy metal tolerant fungi were studied for removal of heavy metals from liquid media at 50 ppm concentration. Results indicated removal of substantial amount of heavy metals by some of the fungi. With respect to Pb, Cd, Cr and Ni, maximum uptake of 59.67, 16.25, 0.55, and 0.55 mg/g was observed by fungi Pb3 (Aspergillus terreus), Trichoderma viride, Cr8 (Trichoderma longibrachiatum), and isolate Ni27 (A. niger) respectively. This indicated the potential of these fungi as biosorbent for removal of heavy metals from wastewater and industrial effluents containing higher concentration of heavy metals.     

Metal biosorption-flotation. Application to cadmium removal

Biosorption, using suspended non-living biomass, and flotation (for consequent solid/liquid separation of the metal-loaded biomass) have been studied in the laboratory as a possible combined process, for the removal of toxic metals (i.e. cadmium) from dilute aqueous solutions. The various parameters of the process were investigated in depth, including re-use of biosorbent. A filter aid (contained in the biomass industrial waste used) was found not really to interfere. -potential measurements of the aforementioned system were also carried out. Promising results were obtained during continuous-flow experiments. A flotation residence time of 4 min was achieved. Metal removal and suspended biomass recovery were generally over 95%.     

Characterization of Desmodesmus pleiomorphus isolated from a heavy metal-contaminated site: biosorption of zinc

Microalgae have been proven efficient biological vectors for heavy metal uptake. In order to further study their biosorption potential, a strain of Desmodesmus pleiomorphus (L) was isolated from a strongly contaminated industrial site in Portugal. Under different initial Zn²⁺ concentrations, metal removal by that strain reached a maximum of 360 mg Zn/g biomass after 7 days, at 30 mg Zn/l, after an initial rapid phase of uptake. Comparative studies were carried out using a strain of the same microalgal species that is commercially available (ACOI 561): when exposed to 30 mg Zn/l, it could remove only 81.8 mg Zn/g biomass. Biosorption experiments using inactivated biomass of the isolated strain reached a maximum Zn²⁺ uptake of 103.7 mg/g. Metal removal at various initial pH values was studied as well; higher removal was obtained at pH 5.0. The microalga strain L, isolated from the contaminated site, exhibited a much higher removal capacity than the commercial strain, and the living biomass yielded higher levels of metal removal than its inactivated form.     

Multi-metal biosorption and bioaccumulation by Exiguobacterium sp. ZM-2

The present work deals with the biosorption performance of dried and non-growing biomasses of Exiguobacterium sp. ZM-2, isolated from soil contaminated with tannery effluents, for the removal of Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ from aqueous solution. The metal concentrations studied were 25 mg/l, 50 mg/l, 100 mg/l, 150 mg/l and 200 mg/l. The effect of solution pH and contact time was also studied. The biosorption capacity was significantly altered by pH of the solution. The removal of metal ions was conspicuously rapid; most of the total sorption occurred within 30 min. The sorption data have been analyzed and fitted to the Langmuir and Freundlich isotherm models. The highest Q_max value was found for the biosorption of Cd²⁺ at 43.5 mg/g in the presence of the non-growing biomass. Recovery of metals (Cd²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) was found to be better when dried biomass was used in comparison to non-growing biomass. Metal removal through bioaccumulation was determined by growing the bacterial strain in nutrient broth amended with different concentrations of metal ions. This multi-metal resistant isolate could be employed for the removal of heavy metals from spent industrial effluents before discharging them into the environment.     

Biosorption of Ni, Cr and Cd by metal tolerant Aspergillus niger and Penicillium sp. using single and multi-metal solution

Fungi including Aspergillus and Penicillium, resistant to Ni2+, Cd2+, and Cr6+ were isolated from soil receiving long-term application of municipal wastewater mix with untreated industrial effluents of Aligarh, India. Metal tolerance in term of minimum inhibitory concentration (MIC) was 125-550 microg/ml for Cd, 300-850 microg/ml for Ni and 300-600 microg/ml for Cr against test fungi. Two isolates, Aspergillus niger and Penicillium sp. were tested for their Cr, Ni and Cd biosorption potential using alkali treated, dried and powdered mycelium. Biosorption experiment was conducted in 100 ml of solution at three initial metal concentrations i.e., 2, 4 and 6 mM with contact time (18 hr) and pretreated fungal biomass (0.1g) at 25 degrees C. Biosorption of all metals was found higher at 4 mM initial metal concentration as compared to biosorption at 2 and 6 mM concentrations. At 4 mM initial metal concentration, chromium biosorption was 18.05 and 19.3 mg/g of Aspergillus and Penicillium biomasses, respectively. Similarly, biosorption of Cd and Ni ions was also maximum at 4 mM initial metal concentration by Aspergillus (19.4 mg/g for Cd and 25.05 mg/g of biomass for Ni) and Penicillium (18.6 mg/g for Cd and 17.9 mg/g of biomass for Ni). In general, biosorption of metal was influenced by initial metal concentration and type of the test fungi. The results indicated that fungi of metal contaminated soil have high level of metal tolerance and biosorption properties.     

The use of hollow fiber cross-flow microfiltration in bioaccumulation and continuous removal of heavy metals from solution by Saccharomyces cerevisiae

Cross-flow microfiltration was shown to retain Saccharomyces cerevisiae biomass utilized for heavy metal bioaccumulation. The passage of metal-laden influent through a series of sequential bioaccumulation systems allowed for further reductions in the levels of copper, cadmium, and cobalt in the final effluent than that afforded by a single bioaccumulation process. Serial bioaccumulation systems also allowed for partial separation of metals from dual metal influents. More than one elemental metal cation could be accumulated simultaneously and in greater quantities than when a single metal was present in the effluent (Cu(2+) 0.43 mmol, Cu(2+) + Cd(2+) 0.67 mmol, and Cu(2+) + Co(2+) 0.83 mmol/g yeast dry mass when the initial concentration of each of the metal species was 0.2 mmol.L(-1)). Co-accumulation of two different metal cations allowed higher total levels of bioaccumulation than found with a single metal. The flux rate was 2.9 x 10(2) L.h(-2)mum(-2) using a polypropylene microfiltration membrane (0.1 mum pore size) at 25 degrees C. (c) 1994 John Wiley & Sons, Inc.     

Cocoa shells for heavy metal removal from acidic solutions

The development of economic and efficient processes for the removal of heavy metals present in acidic effluents from industrial sources or decontamination technologies has become a priority. The purpose of this work was to study the efficiency with which cocoa shells remove heavy metals from acidic solutions (pH 2) and to investigate how the composition of these solutions influences heavy metal uptake efficiency. Adsorption tests were conducted in agitated flasks with single-metal solutions (0.25 mM Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn), multi-metal solution (comprised of 0.25 mM of each of the cations above) and an effluent obtained from chemical leaching of metal-contaminated soil, in the presence of different cocoa shell concentrations (5–40 g/l). Results from the single-metal solution assays indicated that the fixation capacity of heavy metals by cocoa shells followed a specific order: Pb > Cr > Cd=Cu=Fe > Zn=Co > Mn=Ni=Al. Cocoa shells are particularly efficient in the removal of lead from very acidic solutions (q_max=6.2 mg Pb/g, pH_i=2.0 and T=22 °C). The presence of other metals and cations in solution did not seem to affect the recovery of lead. It was also observed that the maximum metal uptake was reached in less than 2 h. This research has also demonstrated that the removal of metals caused a decline in solution proton concentration (pH increase) and release of calcium, magnesium, potassium and sodium from the cocoa shells.     

Ethanolic fermentation of acid pre-treated starch industry effluents by recombinant Saccharomyces cerevisiae strains

Two industrial effluents, a pre-fermentation effluent and a post-fermentation effluent from a wheat starch production plant, were used as substrates for fuel ethanol production in anaerobic batch cultures using minimal nutritional amendment. The performances of three metabolically engineered xylose-utilizing Saccharomyces cerevisiae strains: TMB 3001 expressing XYL1, XYL2 and XKS1, redox metabolism modulated CPB.CR1 and glucose de-repressed CPB.CR2, as well as a reference strain CEN.PK 113-7D not fermenting xylose, were evaluated. For the recombinant strains a glucose consumption phase preceded the xylose consumption phase. In both effluents, biomass and ethanol production occurred predominantly during the glucose consumption phase, whereas xylitol and glycerol formation were predominant in the xylose consumption phase. Total specific ethanol productivities on glucose were 6-fold higher than on xylose in the pre-fermentation effluent and 15-fold higher than on xylose in the post-fermentation effluent. CPB.CR1 showed impaired growth compared to the two other xylose-utilizing strains, but displayed 18% increased ethanol yield in the post-fermentation effluent.     

Impact of industrial waste water effluents on mycoflora of the shore sediments of the 3rd oxidation pond,with reference to biosorption of heavy metals

The third oxidation pond at 10th of Ramadan desert receives a number of industrial waste water effluents contaminated with the heavy metal ions Zn, Cd, Cu and Ni. The species diversity and fungal community structure of seven different sites at the onshore sediments and offshore were studied. Mycological analysis resulted in isolation of 3912 fungal colonies, 11.7% of this count were recovered from the onshore sediment sites (4 sites) whereas 88.3% were from the offshore sites (3 sites), in the desert. Fungal counts and species diversity at the onshore sites tend to increase with increasing distance far from the waste water input. A complete accordance was observed among the total fungal counts and species variabilities with organic matter content at each sampling site. This relationship was reversed in case of heavy metal contents with both counts and diversity. Seventeen fungal species belonging to seven genera were isolated from all sites under study. Aspergillus spp. constituted the majority of the isolates (51.7% of the total isolates), followed by Curvularia, Cephalosporium, and Humicola. Of nine isolated Aspergillus spp., A. humicola was the most dominant (37.4% of the total catch) and appeared at all polluted sites. Therefore, A. humicola was chosen to investigate its potential for heavy metals sorption from the contaminated waste water effluent. Four days old biomass pellets could sorb a large amount of heavy metals according to the following sequence: Zn>Cd>Cu>Ni ions. Agitation significantly increased Zn and Cd sorption, but not Cu and Ni. Heavy metals sorption took place at a wide pH range and particularly increased at alkaline pH (8-9).