Spectroscopic investigations of Er(3+) :CdO-Bi(2) O(3) -B(2) O(3) glasses

This article reports on the optical properties of Er³⁺ ions doped CdO–Bi₂O₃–B₂O₃ (CdBiB) glasses. The materials were characterized by optical absorption and emission spectra. By using Judd–Ofelt theory, the intensity parameters Ω_λ (λ = 2, 4, 6) and also oscillatory strengths were calculated from the absorption spectra. The results were used to compute the radiative properties of Er³⁺:CdBiB glasses. The concentration quenching and energy transfer from Yb³⁺–Er³⁺ were explained. The stimulated emission cross‐section, full width at half maximum (FWHM) and FWHM × values are also calculated for all the Er³⁺:CdBiB glasses. Copyright © 2011 John Wiley & Sons, Ltd.     

Evidence for a differential functional regulation of the two beta(3)-integrins alpha(V)beta(3) and alpha(IIb)beta(3)

The functional regulation of integrins is a major determinant of cell adhesion, migration and tissue maintenance. The binding of cytoskeletal proteins to various sites of integrin cytoplasmic domains is a key mechanism of this functional regulation. Expression of recombinant integrin alpha(IIb)beta(3) and alpha(M)beta(2) lacking the GFFKR-region in CHO cells results in constitutively activated integrins. In contrast, CHO cells stably expressing either a GFFKR-deleted alpha(V(del))beta(3) or a FF to AA-substituted alpha(V(AA))beta(3) do not reveal a constitutively activated integrin. Adhesion to immobilized fibrinogen is strongly impaired in alpha(V(del))beta(3) or alpha(V(AA))beta(3)-expressing cells, whereas it is not impaired in alpha(IIb)beta(3) and alpha(M)beta(2), both lacking the GFFKR-region. In a parallel plate flow chamber assay, alpha(V)beta(3)-expressing cells adhere firmly to fibrinogen and spread even at shear rates of 15 to 20 dyn/cm(2), whereas alpha(V(del))beta(3) or alpha(V(AA))beta(3) cells are detached at 15 dyn/cm(2). Actin stress fiber formation and focal adhesion plaques containing alpha(V)beta(3) are observed in alpha(V)beta(3) cells but not in alpha(V(del))beta(3) or alpha(V(AA))beta(3)-expressing cells. As an additional manifestation of impaired outside-in signaling, phosphorylation of pp125(FAK) was reduced in these cells. In summary, we report that the GFFKR-region of the alpha(V)-cytoplasmic domain and in particular two phenylalanines are essential for integrin alpha(V)beta(3) function, especially for outside-in signaling. Our results suggest that the two beta(3)-integrins alpha(IIb)beta(3) and alpha(V)beta(3) are differentially regulated via their GFFKR-region.     

The ratio of serum 24,25-dihydroxyvitamin D(3) to 25-hydroxyvitamin D(3) is predictive of 25-hydroxyvitamin D(3) response to vitamin D(3) supplementation

24,25-Dihydroxyvitamin D (24,25VD) is a major catabolite of 25-hydroxyvitamin D (25VD) metabolism, and may be physiologically active. Our objectives were to: (1) characterize the response of serum 24,25VD(3) to vitamin D(3) (VD(3)) supplementation; (2) test the hypothesis that a higher 24,25VD(3) to 25VD(3) ratio (24,25:25VD(3)) predicts 25VD(3) response. Serum samples (n=160) from wk 2 and wk 6 of a placebo-controlled, randomized clinical trial of VD(3) (28,000IU/wk) were analyzed for serum 24,25VD(3) and 25VD(3) by mass spectrometry. Serum 24,25VD(3) was highly correlated with 25VD(3) in placebo- and VD(3)-treated subjects at each time point (p<0.0001). At wk 2, the 24,25:25VD(3) ratio was lower with VD(3) than with placebo (p=0.035). From wk 2 to wk 6, the 24,25:25VD(3) ratio increased with the VD(3) supplement (p<0.001) but not with placebo, such that at wk 6 this ratio did not significantly differ between groups. After correcting for potential confounders, we found that 24,25:25VD(3) at wk 2 was inversely correlated to the 25VD(3) increment by wk 6 in the supplemented group (r=-0.32, p=0.02) but not the controls. There is a strong correlation between 24,25VD(3) and 25VD(3) that is only modestly affected by VD(3) supplementation. This indicates that the catabolism of 25VD(3) to 24,25VD(3) rises with increasing 25VD(3). Furthermore, the initial ratio of serum 24,25VD(3) to 25VD(3) predicted the increase in 25VD(3). The 24,25:25VD(3) ratio may therefore have clinical utility as a marker for VD(3) catabolism and a predictor of serum 25VD(3) response to VD(3) supplementation.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils

[This corrects the article on p. 3236 in vol. 59.].     

Synthesis of homohypotaurine (3-aminopropansulfinic acid) and homothiotaurine (3-aminopropanthiosulfonic acid)

A method is described for the chemical synthesis of homohypotaurine starting from homocystamine. By reaction of homohypotaurine with elemental sulfur, the corresponding thiosulfonic derivative, homothiotaurine, may be easily obtained. Homohypotaurine and homothiotaurine may be well separated from each other by paper or ion-exchange chromatography, and by paper electrophoresis, and are easily identified by some specific reactions.     

Palladium(II) complexes containing pyrazole-derived ligands of biological interest. Four,five and six coordinate palladium(II) complexes with 5(3)-methylpyrazole-3(5)-carboxamide and 5(3)-methylpyrazole-3(5)-carbohydrazide

Neutral bis-complexes of palladium(II) with 5(3)- methylpyrazole-3(5)-carboxamide (mpa) and 5(3)- methylpyrazole-3(5)carbohydrazide (mph) of the type PdX₂·2L (where L = mpa, mph; X = Cl, Br, I, SCN, NO₃, ClO₄) have been synthesised and spectroscopically characterised. Available physico-chemical data indicate the mpa complexes of Pd(II) to be trans-square planar species with the primary ligand molecule showing monodentate behavior through the pyrazolyl ring nitrogen only. The Pd(II)—thiocyanate complex of mpa is proposed to have a pseudo-square pyramidal geometry attained through bridging anionic component. The complexes PdX₂·2mph (X = Cl, NO₃) appear to be six-coordinate species at least in the solid state; the corresponding thiocyanato variety has in all probability a five coordinate structure. The species, Pd(ClO₄)₂·2mph is a usual four coordinate one with non-coordinating perchlorate group. The monochelates, PdX₂·mph (X = Br, I), are cis-square planar varieties. The ligand molecule, mph, in all cases is believed to function as (N,N) bidentate ligand in its ‘imidol’ form except in the thiocyanate complex where unusually it exhibits both the monodentate and bidentate functions in the same species.     

Poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate)-based biopolymer systems

Biodegradable biopolymers attract much attention in biology and medicine due to its wide application. The present review considers a biodegradable and biocompatible polymer of bacterial origin, poly(3-hydroxybutyrate), which has wide perspectives in medicine and pharmaceutics. It highlights basic properties of biopolymer (biodegradability and biocompatibility) and also biopolymer systems: various materials, devices and compositions based on the biopolymer. Application of poly(3-hydroxybutyrate)-based biopolymer systems in medicine as surgical implants, in bioengineering as cell culture scaffolds, and in pharmacy as novel drug dosage forms and drug systems are also considered.     

Synthesis of 3-(3-pyridyl)- and 3-(3-benzo[b]thienyl)-D-alanine

The DL-arylamino acid ethyl ester derivatives of beta-(3-pyridyl)-DL-alanine, and beta-(3-benzo[b]thienyl)-DL-alanine were synthesized by diethyl acetamidomalonate condensation with the respective arylmethyl halides followed by partial hydrolysis to the monoethyl ester and decarboxylation. Each derivative was enzymatically resolved to a separable mixture of the corresponding N-acetyl-L-amino acid and the unchanged D amino acid derivative. Acidic hydrolysis of the latter gave the corresponding D-amino acid, the optical purity of which was established by HPLC analysis of the 2,3,4,6-tetra-O-acetyl-beta-D-glucopyranosyl isothiocyanate (GITC) derivative. The free D amino acids were converted to D-BOC derivatives by reaction with di-tert-butyldicarbonate in tert-butyl alcohol, water and sodium hydroxide.     

重组大肠杆菌合成聚(3-巯基丙酸)和聚(3-羟基丁酸-3-巯基丙酸)的研究

利用Clostridium acetobutylicum的丁酸激酶基因 (buk) 和磷酸转丁酰基酶基因(ptb),以及Thiocapsa pfennigii的PHA合成酶基因,设计了一条能够合成多种聚羟基烷酸的代谢途径,用构建的质粒转化大肠杆菌,获得了重组大肠杆菌菌株.前期的研究表明,在合适的前体物条件下,该重组大肠杆菌能够合成包括聚羟基丁酸、聚(羟基丁酸-戊酸)等多种生物聚酯[Liu and Steinbüchel, Appl. Environ. Microbiol. 66739-743].利用该重组大肠杆菌,通过生物催化作用合成了3-巯基丙酸的同型共聚酯,同时利用该重组大肠杆菌还获得了含3-巯基丙酸单体的多种异型共聚物.实验首先研究了3-巯基丙酸对大肠杆菌生长的影响,在此基础上优化了培养过程中添加3-巯基丙酸的时机和浓度,结果表明,在实验的条件下,细胞合成聚(3-巯基丙酸)可达6.7%(占细胞干重),合成聚(3-羟基丁酸-3-巯基丙酸)(分子中3-巯基丙酸3-羟基丁酸=31)可达24.3%.实验进一步研究了同时或分别表达以上3个基因的重组大肠杆菌合成聚合物的能力,结果表明只有当3个基因同时表达时才能合成聚合物,说明3个基因对合成过程是必须的,从而表明了合成途径是按照设计的路线进行的.还通过GC/MS、GPC、IR等手段对合成的化合物进行了定性的研究.聚(3-巯基丙酸)或聚(3-羟基丁酸-3-巯基丙酸)等聚酯属于一类新型生物聚合物,它在分子骨架中含有硫酯键,不同于聚羟基烷酸酯的氧酯键,从而具有显著不同的物理、化学、光学等性质和具有重要的潜在应用价值.     

Characterization of Human Matrilin-3 (MATN3)

We have isolated a cDNA clone for human matrilin-3 from a cartilage-specific cDNA library. The polypeptide predicted from the nucleotide sequence of this clone shared 83% identity with matrilin-3 from mouse and 61% with that from chicken. It was composed of 486 amino acid residues that were arranged in seven domains: a signal peptide, a von Willebrand factor A domain, four EGF repeats, and an α-helical region. The gene for human matrilin-3 (MATN3) was assigned to chromosome region 2p24–p23. The corresponding mRNA of 2.8 kb was expressed in every type of cartilage investigated thus far. It was also producedin vitroby primary chondrocytes isolated from articular cartilage. However, dedifferentiated chondrocytes of the third passage did not express it at all. Matrilin-3 might therefore serve as a marker for the differentiation state of chondrocytes.     

Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils.

The microbial degradation of tensile test pieces made of poly(3-hydroxybutyrate) [P(3HB)] or a copolymer of 90% 3-hydroxybutyric acid and 10% 3-hydroxyvaleric acid was studied in soils incubated at a constant temperature of 15, 28, or 40 degrees C for up to 200 days. In addition, hydrolytic degradation in sterile buffer at temperatures ranging from 4 to 55 degrees C was monitored for 98 days. Degradation was measured through loss of weight (surface erosion), molecular weight, and mechanical strength. While no weight loss was recorded in sterile buffer, samples incubated in soils were degraded at an erosion rate of 0.03 to 0.64% weight loss per day, depending on the polymer, the soil, and the incubation temperature. The erosion rate was enhanced by incubation at higher temperatures, and in most cases the copolymer lost weight at a higher rate than the homopolymer. The molecular weights of samples incubated at 40 degrees C in soils and those incubated at 40 degrees C in sterile buffer decreased at similar rates, while the molecular weights of samples incubated at lower temperatures remained almost unaffected, indicating that molecular weight decrease is due to simple hydrolysis and not to the action of biodegrading microorganisms. The degradation resulted in loss of mechanical properties. From the samples used in the biodegradation studies, 295 dominant microbial strains capable of degrading P (3HB) and the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolymer in vitro were isolated and identified.(ABSTRACT TRUNCATED AT 250 WORDS)     

Regulation of NO(3) Influx in Barley : Studies Using NO(3)

Short-term (10 minutes) measurements of plasmalemma NO₃⁻ influx (_oc) into roots of intact barley plants were obtained using ¹³NO₃⁻. In plants grown for 4 days at various NO₃⁻ levels (0.1, 0.2, 0.5 millimolar), _oc was found to be independent of the level of NO₃⁻ pretreatment. Similarly, pretreatment with Cl⁻ had no effect upon plasmalemma ¹³NO₃⁻ influx. Plants grown in the complete absence of ¹³NO₃⁻ (in CaSO₄ solutions) subsequently revealed influx values which were more than 50% lower than for plants grown in NO₃⁻. Based upon the documented effects of NO₃⁻ or Cl⁻ pretreatments on net uptake of NO₃⁻, these observations suggest that negative feedback from vacuolar NO₃⁻ and/or Cl⁻ acts at the tonoplast but not at the plasmalemma. When included in the influx medium, 0.5 millimolar Cl⁻ was without effect upon ¹³NO₃⁻ influx, but NH₄⁺ caused approximately 50% reduction of influx at this concentration.     

Phosphoinositide 3-kinasegamma (PI3Kgamma) controls L-type calcium current (ICa,L) through its positive modulation of type-3 phosphodiesterase (PDE3)

The modulation of L-type calcium current (ICa,L) is mainly due to mediators acting through activation of G protein-coupled receptors (GPCR) and different protein kinases; among them, phosphoinositide 3-kinasegamma (PI3Kgamma) has been recently discovered to play an important role in the regulation of cardiac contractility and beta-adrenergic signal transduction. Recent reports have demonstrated that, in the heart, different subtypes of beta-adrenergic receptors are coupled to both Gi and/or Gs proteins. While beta1-adrenergic receptors (beta1-AR) couple only to Gs and evoke a strong ICa,L, beta2-adrenergic receptors (beta2-AR) can activate both Gs and Gi proteins and trigger only a limited ICa,L. Here we demonstrate that (i) PI3Kgamma-/- ventricular myocytes are characterized by an higher basal ICa,L density, even if the responsiveness of adenylyl cyclase to Forskolin is comparable to that observed in PI3Kgamma+/+ cardiomyocytes; (ii) both in basal conditions and after beta-AR stimulation, the activity of phosphodiesterase (PDE) type 3 depends on PI3Kgamma; (iii) in PI3Kgamma-/- cardiac myocytes, specific stimulation of beta2-AR is followed by a increase in ICa,L stronger than in wild-type controls. Taken together, our results suggest that the higher values of ICa,L observed both in basal conditions and after beta-AR stimulation in PI3Kgamma-/- ventricular myocytes are mainly due to a positive modulation of PDE3 activity exerted by PI3Kgamma. As observed in PI3Kgamma-/- neonatal cardiomyocytes, cells lacking PI3Kgamma are more sensitive to stimulation of beta2-adrenergic receptors.     

Biosynthesis of Poly(3-Hydroxybutyrate) and Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate) and Its Regulation in Bacteria

Recent data on the biosynthesis of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and its regulation in bacteria are reviewed, with special emphasis on the properties and regulation of the relevant enzymes and their genes. Some conditions promoting the synthesis of PHB and PHBV by natural, mutant, and recombinant producers are considered.     

In vitro biocompatibility of electrospun poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) fiber mats

In the present contribution, the potential for use of the ultrafine electrospun fiber mats of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) as scaffolding materials for skin and nerve regeneration was evaluated in vitro using mouse fibroblasts (L929) and Schwann cells (RT4-D6P2T) as reference cell lines. Comparison was made with PHB and PHBV films that were prepared by solution-casting technique. Indirect cytotoxicity assessment of the as-spun PHB and PHBV fiber mats with mouse fibroblasts (L929) and Schwann cells (RT4-D6P2T) indicated that the materials were acceptable to both types of cells. The attachment of L929 on all of the fibrous scaffolds was significantly better than that on both the film scaffolds and tissue-culture polystyrene plate (TCPS), while RT4-D6P2T appeared to attach on the flat surfaces of TCPS and the film scaffolds much better than on the rough surfaces of the fibrous scaffolds. For L929, all of the fibrous scaffolds were superior in supporting the cell proliferation to the film counterparts, but inferior to TCPS at days 3 and 5, while, for RT4-D6P2T, the rough surfaces of the fibrous scaffolds appeared to be very poor in supporting the cell proliferation when comparing with the smooth surfaces of TCPS and the film scaffolds. Scanning electron microscopy was also used to observe the behavior of both types of cells that were cultured on both the fibrous and the film scaffolds and glass substrate for 24 h.     

Preparation of alkyl (R)-(-)-3-hydroxybutyrate by acidic alcoholysis of poly-(R)-(-)-3-hydroxybutyrate

An efficient method for the preparation of optically active alkyl (R)-(-)-3-hydroxybutyrates by chemical depolymerization of biopolymer, poly-(R)-(-)-(3-hydroxybutyrate), was established. This method consists of simple recovery of poly-(R)-(-)-(3-hydroxybutyrate) from bacterial cells followed by acidic alcoholysis. When poly-(R)-(-)-(3-hydroxybutyrate) was purified by a simple digestion method that used 0.2 N sodium hydroxide, alkyl (R)-(-)-hydroxybutyrates were most efficiently produced by alcoholysis with anhydrous hydrochloric acid.