Adhesion properties of mutants of Staphylococcus aureus defective in fibronectin-binding proteins and studies on the expression of fnb genes

Staphylococcus aureus 8325-4 has the potential to express two distinct cell wall-associated fibronectin-binding proteins called FnBPA and FnBPB. In order to test if both proteins are expressed in S. aureus and if both are required for promoting bacterial adhesion to fibronectin-coated surfaces, insertion mutations were isolated in each gene. A DNA fragment encoding tetracycline resistance was inserted into fnbA and a fragment encoding erythromycin resistance was inserted into fnbB . A double fnbA fnbB mutant was also constructed. The fnbA and fnbB single mutants showed no significant reduction in their adhesion to polymethylmethacrylate coverslips that had been coated in vitro with fibronectin. However, the double mutant was completely defective in adhesion. Monospecific antibodies directed against the non-conserved N-terminal regions of both proteins confirmed the lack of expression of FnBPs in the mutant strains. Wild-type fnbA and fnbB genes cloned seperately on a multicopy plasmid were each able to restore fully the adhesion-defective phenotype of the 8325-4 fnbA fnbB mutant. This demonstrates that both fnb genes are expressed in S. aureus and that both contribute to the ability of strain 8325-4 to adhere to fibronectin-coated surfaces. The double mutant was also defective in adhesion to coverslips that had been removed from tissue cages implanted subcutaneously in guinea-pigs, which suggests that fibronectin is important in promoting attachment of S. aureus to biomaterial in vivo .     

Fibronectin-binding protein acts as Staphylococcus aureus invasin via fibronectin bridging to integrin alpha5beta1

The ability of Staphylococcus aureus to invade mammalian cells may explain its capacity to colonize mucosa and to persist in tissues after bacteraemia. To date, the underlying molecular mechanisms of cellular invasion by S. aureus are unknown, despite its high prevalence and difficulties in treatment. Here, we show cellular invasion as a novel function for an S. aureus adhesin, previously implicated solely in attachment. S. aureus , but not S. epidermidis , invaded epithelial 293 cells in a temperature- and F-actin-dependent manner. Formaldehyde-fixed and live bacteria were equally invasive, suggesting that no active bacterial process was involved. All clinical S. aureus isolates analysed, but only a subset of laboratory strains, were invasive. Fibronectin-binding proteins (FnBPs) acted as S. aureus invasins, because: (i) FnBP deletion mutants of invasive laboratory strains lost invasiveness; (ii) expression of FnBPs in non-invasive strains conferred invasiveness; and (iii) the soluble isolated fibronectin-binding domain of FnBP (D1–D4) completely blocked invasion. Integrin α₅β₁ served as host cell receptor, which interacted with staphylococcal FnBPs through cellular or soluble fibronectin. FnBP-deficient mutants lost invasiveness for epithelial cells, endothelial cells and fibroblasts. Thus, fibronectin-dependent bridging between S. aureus FnBPs and host cell integrin α₅β₁ is a conserved mechanism for S. aureus invasion of human cells. This may prove useful in developing new therapeutic and vaccine strategies for S. aureus infections.     

Staphylococcus aureus-Fibronectin Interactions with and without Fibronectin-Binding Proteins and Their Role in Adhesion and Desorption

Adhesion and residence-time-dependent desorption of two Staphylococcus aureus strains with and without fibronectin (Fn) binding proteins (FnBPs) on Fn-coated glass were compared under flow conditions. To obtain a better understanding of the role of Fn-FnBP binding, the adsorption enthalpies of Fn with staphylococcal cell surfaces were determined using isothermal titration calorimetry (ITC). Interaction forces between staphylococci and Fn coatings were measured using atomic force microscopy (AFM). The strain with FnBPs adhered faster and initially stronger to an Fn coating than the strain without FnBPs, and its Fn adsorption enthalpies were higher. The initial desorption was high for both strains but decreased substantially within 2 s. These time scales of staphylococcal bond ageing were confirmed by AFM adhesion force measurement. After exposure of either Fn coating or staphylococcal cell surfaces to bovine serum albumin (BSA), the adhesion of both strains to Fn coatings was reduced, suggesting that BSA suppresses not only nonspecific but also specific Fn-FnBP interactions. Adhesion forces and adsorption enthalpies were only slightly affected by BSA adsorption. This implies that under the mild contact conditions of convective diffusion in a flow chamber, adsorbed BSA prevents specific interactions but does allow forced Fn-FnBP binding during AFM or stirring in ITC. The bond strength energies calculated from retraction force-distance curves from AFM were orders of magnitude higher than those calculated from desorption data, confirming that a penetrating Fn-coated AFM tip probes multiple adhesins in the outermost cell surface that remain hidden during mild landing of an organism on an Fn-coated substratum, like that during convective diffusional flow.     

Mapping the recognition domains of pneumococcal fibronectin‐binding proteins PavA and PavB demonstrates a common pattern of molecular interactions with fibronectin type III repeats

Colonization of mucosal respiratory surfaces is a prerequisite for the human pathobiont Streptococcus pneumoniae (the pneumococcus) to cause severe invasive infections. The arsenal of pneumococcal adhesins interacts with a multitude of extracellular matrix proteins. A paradigm for pneumococci is their interaction with the adhesive glycoprotein fibronectin, which facilitates bacterial adherence to host cells. Here, we deciphered the molecular interaction between fibronectin and pneumococcal fibronectin‐binding proteins (FnBPs) PavA and PavB respectively. We show in adherence and binding studies that the pneumococcal interaction with fibronectin is a non‐human specific trait. PavA and PavB target at least 13 out of 15 type III fibronectin domains as demonstrated in ligand overlay assays, surface plasmon resonance studies and SPOT peptide arrays. Strikingly, both pneumococcal FnBPs recognize similar peptides in targeted type III repeats. Structural comparisons revealed that the targeted type III repeat epitopes cluster on the inner strands of both β‐sheets forming the fibronectin domains. Importantly, synthetic peptides of FnIII¹, FnIII⁵ or FnIII¹⁵ bind directly to FnBPs PavA and PavB respectively. In conclusion, our study suggests a common pattern of molecular interactions between pneumococcal FnBPs and fibronectin. The specific epitopes recognized in this study can potentially be tested as antimicrobial targets in further scientific endeavours.     

Impact of staphylococcal protease expression on the outcome of infectious arthritis

The exoproteases of Staphylococcus aureus have been proposed as virulence factors during S. aureus infections. To investigate this, we used the wild-type S. aureus strain 8325-4 and its mutants devoid of aureolysin, serine protease, and cysteine protease, respectively, in a well-established model of septic arthritis in mice. The inactivation of the exoprotease genes did not affect the frequency or the severity of joint disease. We conclude that in the model of haematogenously spread staphylococcal arthritis, the bacterial proteases studied do not act as virulence factors.     

Acoustic detection of cell adhesion to a coated quartz crystal microbalance – implications for studying the biocompatibility of polymers

Biocompatibility of polymers is an important parameter for the successful application of polymers in tissue engineering. In this work, quartz crystal microbalance (QCM) devices were used to follow the adhesion of NIH 3T3 fibroblasts to QCM surfaces modified with fibronectin (FN) and poly-D -lysine (PDL). The variations in sensor resonant frequency (Δf) and motional resistance (ΔR), monitored as the sensor signal, revealed that cell adhesion was favored in the PDL-coated QCMs. Fluorescence microscopy images of seeded cells showed more highly spread cells on the PDL substrate, which is consistent with the results of the QCM signals. The sensor signal was shown to be sensitive to extracellular matrix (ECM)-binding motifs. Ethylenediaminetetraacetic acid (EDTA) and soluble Gly-Arg-Gly-Asp-Ser (GRGDS) peptides were used to interfere with cell-ECM binding motifs onto FN-coated QCMs. The acquired acoustic signals successfully showed that in the presence of 30 mM EDTA or 1 mM GRGDS, cell adhesion is almost completely abolished due to the inhibition/blocking of integrin function by these compounds. The results presented here demonstrate the potential of the QCM sensor to study cell adhesion, to monitor the biocompatibility of polymers and materials, and to assess the effect of adhesion modulators. QCM sensors have great potential in tissue engineering applications, as QCM sensors are able to analyze the biocompatibility of surfaces and it has the added advantage of being able to evaluate, in situ and in real time, the effect of specific drugs/treatments on cells.     

Utilizing QCM-D to characterize the adhesive mucilage secreted by two marine diatom species in-situ and in real-time

The quartz crystal microbalance with dissipation monitoring (QCM-D) was used to monitor the deposition of adhesive extracellular polymeric substances (EPS) employed by the marine biofouling diatoms Craspedostauros australis Cox and Amphora coffeaeformis Cleve during initial adhesion and subsequent motility. Upon injection into the QCM chamber, initial negative frequency (f) shifts and positive dissipation (D) shifts were measured that correlated to cells impacting and adhering to the QCM sensor surface. Following this "initial adhesion" response, f continued to decrease while D increased logarithmically. Rather than the result of any cell morphological alterations at the substrate surface, the shifts were correlated to the time-dependent deposition of EPS upon the substrate surface as a result of cellular motility, or gliding. Experiments utilizing comparable cell concentrations of the diatom species C. australis and A. coffeaeformis revealed significant differences between the parameter responses recorded, where A. coffeaeformis produced Deltaf and DeltaD values of -32 Hz and 6.6, and C. australis produced values of -82 Hz and 42, respectively, after 20 h post-inoculation. The viscoelastic properties of the adhered EPS adlayer from both species were examined via a Deltaf/DeltaD plot, providing reproducible signature "ratio" values for each species that likely correlate to differences in EPS interactions with the substrate that may be associated directly to differences in the fouling potential of the two species. There is a distinct lack of knowledge regarding the chemical nature of the adhesive polymers engaged, and few quantitative techniques are applicable to the study of diatom EPS. We propose that QCM-D may be a useful tool in identifying differences in the EPS employed by diatoms of different fouling potential.     

Monitoring of integrin-mediated adhesion of human ovarian cancer cells to model protein surfaces by quartz crystal resonators: evaluation in the impedance analysis mode

The quartz crystal microbalance (QCM) was used to monitor specific, integrin-mediated adhesion of human ovarian cancer cells to distinct extracellular matrix (ECM) proteins immobilized on gold-coated quartz crystal resonators. The QCM was operated in the impedance analysis mode, where frequency shift as well as bandwidth are accessible on a broad range of overtones. The increase in bandwidth caused by covering the quartz resonator with cells was reproducible and largely independent of overtone order, whereas the frequency shift displayed some variability. Thus the bandwidth proved to be the more robust parameter for sensing cell adhesive events. The bandwidth increased in proportion to the number of seeded cells to the quartz crystal as long as the number was below 150,000 cells/ml. Comparing the resonance parameters on different harmonics, one finds that viscoelastic modeling with homogeneous layer systems cannot reproduce the results: lateral heterogeneity has to be taken into account. The differences in adhesive strength of human ovarian cancer cells towards selected ECM proteins monitored by QCM was in good agreement with data obtained by conventional cell adhesion assays. Strong cell adhesion was observed to the ECM proteins vitronectin (VN) and fibronectin (FN), while only weak attachment occurred on laminin. In order to prove specific, integrin alphavbeta3-mediated cell adhesion to its ligands FN and VN, the cyclic integrin alphavbeta3-directed peptide c(RGDfV) was used as competitor and significantly reversed cell adhesion. Since integrin interaction with ECM proteins is dependent on the presence of bivalent cations, cell detachment was also seen after treatment of cell monolayers with the chelator ethylene-dinitro-tetra-acetic acid (EDTA). The QCM technique is a reliable method to monitor cell adsorption to ECM-pretreated surfaces in real time. It may be an alternative tool for screening specific and selective antagonists of integrin/ECM interaction.     

Adherence of Staphylococcus aureus fibronectin binding protein A mutants: an investigation using optical tweezers

Bacterial adhesion to extracellular matrix proteins plays a major role in infections of host tissue and medical devices. In some species of gram-positive cocci, this adhesion is mediated by specific molecules present on the bacterial cell surface. We have used optical tweezers to dynamically measure the adhesive force between an individual Staphylococcus aureus bacterium and a fibronectin-coated surface. A bacterium was optically trapped and brought in contact with a 10-microm diameter polystyrene microsphere coated with fibronectin. The force required to detach the cell from the microsphere was measured by tracking the displacement signals of the trapped cell on a quadrant photodiode throughout the detachment process for a series of S. aureus strains expressing fibronectin-binding proteins with various degrees of mutation. The single-bond rupture forces ranged between 15 and 26 pN depending on the extent of mutation. No binding was observed in the strain with the highest degree of mutation. These results confirm that multiple regions of the S. aureus fibronectin adhesin participate in the binding process and provide further insight into the role of these regions in the adhesive process.     

Shear stress affects the kinetics of Staphylococcus aureus adhesion to collagen

Staphylococcus aureus is a major human pathogen that has been shown to bind collagen under static conditions. However, many staphylococcal infections are hematogenously acquired and adhesion events may be influenced by shear stress. In this study, we used a dynamic experimental system consisting of a parallel-plate perfusion chamber and phase-contrast video microscope to study the effects of shear stress on the adhesion kinetics of intact S. aureus to collagen surfaces in vitro. The adhesion of S. aureus Phillips to collagen types I, II, and IV was investigated over a physiologically relevant range of wall shear stresses at 37 degrees C. S. aureus PH100, a collagen adhesin-deficient mutant strain, was used as a control strain for the experiments. We found that S. aureus Phillips could adhere to collagens I, II, and IV at wall shear stresses less than 15 dyn/cm(2) and that the kinetics of the adhesion process were wall shear stress-dependent. Similar studies with PH100 demonstrated that these cells are unable to adhere firmly to collagen surfaces. Transient interactions between PH100 and the collagen surfaces were observed at low levels of shear stress suggesting that S. aureus may also interact with collagen by an alternative mechanism that does not lead to firm adhesion.     

Specific adhesion of vesicles monitored by scanning force microscopy and quartz crystal microbalance

The specific adhesion of unilamellar vesicles with an average diameter of 100 nm on functionalized surfaces mediated by molecular recognition was investigated in detail. Two complementary techniques, scanning force microscopy (SFM) and quartz crystal microbalance (QCM) were used to study adhesion of liposomes consisting of 1, 2-dipalmitoyl-sn-glycero-3-phosphocholine and varying concentrations of N-((6-biotinoyl)amino)hexanoyl)-1, 2-dihexadecanoyl-sn-glycero-3-phosphoethanolamine (biotin-X-DHPE). Monitoring the adhesion of the receptor-doped vesicles to avidin-coated gold surfaces by QCM (f(0) = 5 MHz) revealed an increased shift in resonance frequency with increasing biotin concentration up to 10 mol% biotin-X-DHPE. To address the question of how the morphology of the liposomes changes upon adhesion and how that contributes to the resonator's frequency response, we performed a detailed analysis of the liposome morphology by SFM. We found that, with increasing biotin-concentration, the height of the liposomes decreases considerably up to the point where vesicle rupture occurs. Thus, we conclude that the unexpected high frequency shifts of the quartz crystal (>500 Hz) can be attributed to a firm attachment of the spread bilayers, in which the number of contacts is responsible for the signal. These findings are compared with one of our recent studies on cell adhesion monitored by QCM.     

Dissociation rate constants of human fibronectin binding to fibronectin-binding proteins on living Staphylococcus aureus isolated from clinical patients

Staphylococcus aureus is part of the indigenous microbiota of humans. Sometimes, S. aureus bacteria enter the bloodstream, where they form infections on implanted cardiovascular devices. A critical, first step in such infections is a bond that forms between fibronectin-binding protein (FnBP) on S. aureus and host proteins, such as fibronectin (Fn), that coat the surface of implants in vivo. In this study, native FnBPs on living S. aureus were shown to form a mechanically strong conformational structure with Fn by atomic force microscopy. The tensile acuity of this bond was probed for 46 bloodstream isolates, each from a patient with a cardiovascular implant. By analyzing the force spectra with the worm-like chain model, we determined that the binding events were consistent with a multivalent, cluster bond consisting of ~10 or ~80 proteins in parallel. The dissociation rate constant (k(off), s(-1)) of each multibond complex was determined by measuring strength as a function of the loading rate, normalized by the number of bonds. The bond lifetime (1/k(off)) was two times longer for bloodstream isolates from patients with an infected device (1.79 or 69.47 s for the 10- or 80-bond clusters, respectively; n = 26 isolates) relative to those from patients with an uninfected device (0.96 or 34.02 s; n = 20 isolates). This distinction could not be explained by different amounts of FnBP, as confirmed by Western blots. Rather, amino acid polymorphisms within the Fn-binding repeats of FnBPA explain, at least partially, the statistically (p < 0.05) longer bond lifetime for isolates associated with an infected cardiovascular device.     

Fibronectin-binding proteins of Staphylococcus aureus mediate activation of human platelets via fibrinogen and fibronectin bridges to integrin GPIIb/IIIa and IgG binding to the FcgammaRIIa receptor

Staphylococcus aureus is a leading cause of infective endocarditis (IE). Platelet activation promoted by S. aureus resulting in aggregation and thrombus formation is an important step in the pathogenesis of IE. Here, we report that the fibrinogen/fibronectin-binding proteins FnBPA and FnBPB are major platelet-activating factors on the surface of S. aureus from the exponential phase of growth. Truncated derivatives of FnBPA, presenting either the fibrinogen-binding A domain or the fibronectin-binding BCD region, each promoted platelet activation when expressed on the surface of S. aureus or Lactococcus lactis, indicating two distinct mechanisms of activation. FnBPA-promoted platelet activation is mediated by fibrinogen and fibronectin bridges between the A domain and the BCD domains, respectively, to the low affinity form of the integrin GPIIb/IIIa on resting platelets. Antibodies recognizing the FnBPA A domain or the complex between the FnBPA BCD domains and fibronectin were essential for activation promoted by bacteria expressing the A domain or the BCD domain respectively. Activation was inhibited by a monoclonal antibody (IV-3) specific for the FcgammaRIIa IgG receptor on platelets. We propose that the activation of quiescent platelets by bacteria expressing FnBPs involves the formation of a bridge between the bacterial cell and the platelet surface by (i) fibronectin and fibrinogen interacting with the low affinity form of GPIIb/IIIa and (ii) by antibodies specific to FnBPs that engage the platelet Fc receptor FcgammaRIIa. Platelet activation by S. aureus clinical IE isolates from both the exponential and stationary phases of growth was completely inhibited by monoclonal antibody IV-3 suggesting that the IgG-FcgammaRIIa interaction is of fundamental importance for platelet activation mediated by this organism. This suggests new avenues for development of therapeutics against vascular infections.     

Staphylococcus aureus SigB activity promotes a strong fibronectin–bacterium interaction which may sustain host tissue colonization by small‐colony variants isolated from cystic fibrosis patients

Genes encoding cell‐surface proteins regulated by SigB are stably expressed in Staphylococcus aureus small‐colony variants (SCVs) isolated from cystic fibrosis (CF) patients. Our hypothesis is that CF‐isolated SCVs are locked into a colonization state by sustaining the expression of adhesins such as fibronectin‐binding proteins (FnBPs) throughout growth. Force spectroscopy was used to study the fibronectin–FnBPs interaction among strains varying for their SigB activity. The fibronectin–FnBPs interaction was described by a strength of 1000 ± 400 pN (pulling rate of 2 μm s^?1), an energetic barrier width of 0.6 ± 0.1 Å and an off‐rate below 2 × 10^?4 s^?1. A CF‐isolated SCV highly expressed fnbA throughout growth and showed a sustained capacity to bind fibronectin, whereas a prototypic strain showed a reduced frequency of fibronectin‐binding during the stationary growth phase when its fnbA gene was down‐regulated. Reduced expression of fnbA was observed in sigB mutants, which was associated with an overall decrease adhesion to fibronectin. These results suggest that the fibronectin–FnBPs interaction plays a role in the formation of a mechanically resistant adhesion of S. aureus to host tissues and supports the hypothesis that CF‐isolated SCVs are locked into a colonization state as a result of a sustained SigB activity.     

Biomaterial-associated staphylococcal peritoneal infections in a neutropaenic mouse model

Abstract Adhesion of staphylococcal cells to polyethylene with end point-attached heparin was quantified by bioluminescence. Staphylococcus epidermidis 3380 and the slime-producing S. epidermidis RP12 adhered to the highest extent, and S. lugdunensis 2342 to the least extent. Preincubation of the polymer with dialysis fluid reduced adhesion of S. epidermidis 3380 and RP12 but enhanced that of S. aureus , and preadsorption of the surface with fibronectin decreased subsequent adhesion of S. epidermidis and S. haemolyticus strains. When staphylococci were grown in the presence of a biomaterial their ability to activate peritoneal cells was decreased. The bactericidal activity was impaired, whereas ingestion of opsonized coagulase-negative staphylococci (CNS) strains was unaffected. With S. epidermidis RP12 the presence of biomaterial did not influence either phagocytosis or bactericidal effect of peritoneal cells. After intra-peritoneal challenge with staphylococcal strains, the organ uptake of S. aureus Cowan 1 was increased in normal mice whereas immunosuppressed mice died. CNS strains increased mainly in the peritoneal cavity of immunosuppressed mice. The uptake of bacteria in liver and kidneys was increased with S. epidermidis 3380, S. lugdunensis 2343 and S. schleiferi 667-88. Generally, CNS strains persisted in the peritoneal cavity of both normal and immunosuppressed mice. These data indicate that host defense mechanisms, mainly polymorphonuclear neutrophils, fail to eliminate CNS infections in the peritoneum, and that initial adhesion to an implanted biomaterial may be of lesser importance in the peritoneal cavity than in e.g. catheter-associated infections. There are strain-specific virulence factors of bacteria, and slime producing strains evade the host defense mechanisms more efficiently than non-slime producing strains.     

Chromosomal map location of the methicillin resistance determinant in Staphylococcus aureus.

Three-factor genetic crosses performed by transformation have shown that the methicillin resistance determinant of Staphylococcus aureus strain DU4916 (the mec-4916 marker) is linked to a novobiocin resistance (Novr) marker (nov-142) and mutational sites affecting pyrimidine (pyr-141), purine (pur-102), and histidine (hisG15) biosynthesis in S. aureus strain 8325. The linkage group thus defined is pyr-141-hisG15-nov-142-pur-102-mec-4916. Phage 80alpha previously propagated on a novobiocin-resistant, methicillin-sensitive (Mecs) 8325 strain was used to infect 21 novobiocin-sensitive, methicillin-resistant clinical isolates (including strain DU4916). Among the novobiocin-resistant transductants so obtained from each recipient, between 1 and 5% were methicillin sensitive (reflecting cotransduction of Novr and Mecs). These results are consistent with the genetic determinant of methicillin resistance having a single chromosomal locus in most, if not all, strains of S. aureus.     

Cloning and expression of the gene for a fibronectin-binding protein from Staphylococcus aureus.

The gene encoding the fibronectin-binding protein (FNBP) from Staphylococcus aureus strain 8325-4 was isolated from a gene bank in pBR322. The original clone, containing a 6.5-kb insert, gave a functional product present in the periplasm of Escherichia coli. Analysis of polypeptides isolated after affinity chromatography on fibronectin-Sepharose followed by ion-exchange chromatography revealed two gene products, 87 and 165 kd in mol. wt. The amino acid compositions of these two polypeptides and a native FNBP from S. aureus strain Newman were very similar. Antibodies raised against the native FNBP from strain Newman precipitated the 125I-labelled 165-kd polypeptide, and unlabeled 165- and 87-kd polypeptides as well as native FNBP inhibited the immunoprecipitation reactions. The region of the fnbp-gene encoding the fibronectin-binding activity has been identified and subcloned in an expression vector based on the staphylococcal protein A gene. The resulting product in E. coli is an extracellular fusion protein consisting of two IgG-binding domains of protein A followed by a fibronectin-binding region. The fusion protein binds to fibronectin and completely inhibits the binding of fibronectin to intact cells of S. aureus.     

The adhesion of protein A-bearing Staphylococcus aureus organisms to soluble-staphylococcal-antigens-coated HeLa cells mediated by specific antibodies

The adhesion of staphylococcal protein A (SpA)-bearing Staphylococcus aureus Cowan I organisms to HeLa cells was enhanced by pretreatment of HeLa cells with staphylococcal extracellular antigens and antibodies to them. The adhesion of HLj, an SpA-poor mutant derived from Cowan I, to HeLa cells was not enhanced by the same pretreatment of HeLa cells. Furthermore, the enhanced staphylococcal adhesion was inhibited by soluble SpA. The antigen(s) responsible for the enhanced staphylococcal adhesion was(were) heat stable. Pretreatment of HeLa cells with the mixture of staphylococcal extracellular antigens and antibodies to them also enhanced the adhesion of Cowan I. Similarly the adhesion of Cowan I was enhanced by pretreatment of HeLa cells with extracellular antigens of Pseudomonas aeruginosa and antibodies to them. These results indicated that cell-bound SpA mediated the binding of S. aureus to immune complexes composed of extracellular bacterial products and antibodies to them bound to the surface of HeLa cells, and suggested another role of cell-bound SpA as a co-adhesin with other factors in infections due to S. aureus.     

Staphylococcus aureus keratinocyte invasion is dependent upon multiple high-affinity fibronectin-binding repeats within FnBPA

Staphylococcus aureus is a commensal organism and a frequent cause of skin and soft tissue infections, which can progress to serious invasive disease. This bacterium uses its fibronectin binding proteins (FnBPs) to invade host cells and it has been hypothesised that this provides a protected niche from host antimicrobial defences, allows access to deeper tissues and provides a reservoir for persistent or recurring infections. FnBPs contain multiple tandem fibronectin-binding repeats (FnBRs) which bind fibronectin with varying affinity but it is unclear what selects for this configuration. Since both colonisation and skin infection are dependent upon the interaction of S. aureus with keratinocytes we hypothesised that this might select for FnBP function and thus composition of the FnBR region. Initial experiments revealed that S. aureus attachment to keratinocytes is rapid but does not require FnBRs. By contrast, invasion of keratinocytes was dependent upon the FnBR region and occurred via similar cellular processes to those described for endothelial cells. Despite this, keratinocyte invasion was relatively inefficient and appeared to include a lag phase, most likely due to very weak expression of α(5)β(1) integrins. Molecular dissection of the role of the FnBR region revealed that efficient invasion of keratinocytes was dependent on the presence of at least three high-affinity (but not low-affinity) FnBRs. Over-expression of a single high-affinity or three low-affinity repeats promoted invasion but not to the same levels as S. aureus expressing an FnBPA variant containing three high-affinity repeats. In summary, invasion of keratinocytes by S. aureus requires multiple high-affinity FnBRs within FnBPA, and given the importance of the interaction between these cell types and S. aureus for both colonisation and infection, may have provided the selective pressure for the multiple binding repeats within FnBPA.     

Effect of Ionic Strength on Initial Interactions of Escherichia coli with Surfaces, Studied On-Line by a Novel Quartz Crystal Microbalance Technique

A novel quartz crystal microbalance (QCM) technique was used to study the adhesion of nonfimbriated and fimbriated Escherichia coli mutant strains to hydrophilic and hydrophobic surfaces at different ionic strengths. This technique enabled us to measure both frequency shifts (Deltaf), i.e., the increase in mass on the surface, and dissipation shifts (DeltaD), i.e., the viscoelastic energy losses on the surface. Changes in the parameters measured by the extended QCM technique reflect the dynamic character of the adhesion process. We were able to show clear differences in the viscoelastic behavior of fimbriated and nonfimbriated cells attached to surfaces. The interactions between bacterial cells and quartz crystal surfaces at various ionic strengths followed different trends, depending on the cell surface structures in direct contact with the surface. While Deltaf and DeltaD per attached cell increased for nonfimbriated cells with increasing ionic strengths (particularly on hydrophobic surfaces), the adhesion of the fimbriated strain caused only low-level frequency and dissipation shifts on both kinds of surfaces at all ionic strengths tested. We propose that nonfimbriated cells may get better contact with increasing ionic strengths due to an increased area of contact between the cell and the surface, whereas fimbriated cells seem to have a flexible contact with the surface at all ionic strengths tested. The area of contact between fimbriated cells and the surface does not increase with increasing ionic strengths, but on hydrophobic surfaces each contact point seems to contribute relatively more to the total energy loss. Independent of ionic strength, attached cells undergo time-dependent interactions with the surface leading to increased contact area and viscoelastic losses per cell, which may be due to the establishment of a more intimate contact between the cell and the surface. Hence, the extended QCM technique provides new qualitative information about the direct contact of bacterial cells to surfaces and the adhesion mechanisms involved.