Exploiting comparative mapping among Brassica species to accelerate the physical delimitation of a genic male-sterile locus (BnRf) in Brassica napus

The recessive genic male sterility (RGMS) line 9012AB has been used as an important pollination control system for rapeseed hybrid production in China. Here, we report our study on physical mapping of one male-sterile locus (BnRf) in 9012AB by exploiting the comparative genomics among Brassica species. The genetic maps around BnRf from previous reports were integrated and enriched with markers from the Brassica A7 chromosome. Subsequent collinearity analysis of these markers contributed to the identification of a novel ancestral karyotype block F that possibly encompasses BnRf. Fourteen insertion/deletion markers were further developed from this conserved block and genotyped in three large backcross populations, leading to the construction of high-resolution local genetic maps where the BnRf locus was restricted to a less than 0.1-cM region. Moreover, it was observed that the target region in Brassica napus shares a high collinearity relationship with a region from the Brassica rapa A7 chromosome. A BnRf-cosegregated marker (AT3G23870) was then used to screen a B. napus bacterial artificial chromosome (BAC) library. From the resulting 16 positive BAC clones, one (JBnB089D05) was identified to most possibly contain the BnRf (c) allele. With the assistance of the genome sequence from the Brassica rapa homolog, the 13.8-kb DNA fragment covering both closest flanking markers from the BAC clone was isolated. Gene annotation based on the comparison of microcollinear regions among Brassica napus, B. rapa and Arabidopsis showed that five potential open reading frames reside in this fragment. These results provide a foundation for the characterization of the BnRf locus and allow a better understanding of the chromosome evolution around BnRf.     

Improvement of the recessive genic male sterile lines with a subgenomic background in Brassica napus by molecular marker-assisted selection

Both the pollination control system and genetic distance are major factors in the utilization of crop heterosis. The recessive genic male sterile line (RGMS) 7-7365A (Bnms3ms3ms4ms4) has been widely applied to hybrid seed production because it can generate a completely male sterile population by crossing with the 7-7365C temporary line (Bnms3ms3rfrf). In this study, the sterile genes of 7-7365A were transferred to the new Brassica napus lines 7-749 and 7-750 with a high content of subgenomes by backcross breeding. We used the amplified fragment length polymorphism (AFLP) technique combined with bulk segregant analysis (BSA) to identify markers linked to the BnMs4 gene. Twelve AFLP markers linked to the BnMs4 gene were identified. Of them, SA06MG09 and P08MG16 were the closest makers, which were on either side of the gene at a distance of 0.9 and 0.8?cM, respectively. Twenty AFLP primer combinations were used to screen the F2, BC1F3, and BC2F4 populations from the breeding program, and the markers linked to the BnMs3 and BnMs4 genes were used to screen the BC2F4 populations. As a result, we obtained two types of improved sterile lines, 7-749A and 7-750A, and their indexes of subgenomic components (ISG) were 44.2?C49.8 and 20.2?C26.6%, respectively. The combining ability analyses of seed yield character were conducted in the crosses from the three sterile lines and ten restorers within a random block design in three environments for two successive years. The general combining ability (GCA) of the two improved sterile lines were significantly higher than the GCA of 7-7365A in every environment tested. The two improved sterile lines had stability in seed yield, and they will be used in the future for hybrid seed production.     

Fine mapping of the recessive genic male sterility gene (<Emphasis Type="Italic">Bnms3</Emphasis>) in <Emphasis Type="Italic">Brassica napus</Emphasis> L.

The Brassica napus oilseed rape line, 7-7365AB, is a recessive epistatic genic male sterile (RGMS) two-type line system. The sterility is controlled by two pairs of recessive duplicate genes (Bnms3 and Bnms4) and one pair of recessive epistatic inhibitor gene (Bnrf). Homozygosity at the Bnrf locus (Bnrfrf) inhibits the expression of the two recessive male sterility genes in homozygous Bnms3ms3ms4ms4 plants and produces a male fertile phenotype. This line has a good potential for heterosis utilization but it is difficult to breed heterotic hybrids without molecular markers. To develop markers linked to the BnMs3 gene, amplified fragment length polymorphism (AFLP) technology was applied to screen the bulks of sterile and fertile individuals selected randomly from a population of near-isogenic lines (NIL) consisting of 2,000 plants. From a survey of 1,024 primer combinations, we identified 17 AFLP markers linked to the BnMs3 gene. By integrating the previous markers linked to the BnMs3 gene into the genetic map of the NIL population, two markers, EA01MC12 and EA09P06, were located on either side of the BnMs3 gene at a distance of 0.1 and 0.3 cM, respectively. In order to use the markers for male sterile line breeding, five AFLP markers, P05MG05, P03MG04, P11MG02, P05MC11₂₅₀, and EA09P06, were successfully converted into sequence characterized amplified region (SCAR) markers. Two of these, P06MG04 and sR12384, were subsequently mapped on to linkage group N19 using two doubled-haploid mapping populations available at our laboratory derived from the crosses Tapidor × Ningyou7 and Quantum × No2127-17. The markers found in the present study should improve our knowledge of recessive genic male sterility (RGMS), and accelerate the development of male sterile line breeding and map-based cloning.     

BnaC.Tic40, a plastid inner membrane translocon originating from Brassica oleracea, is essential for tapetal function and microspore development in Brassica napus

Here, we describe the characteristics of a Brassica napus male sterile mutant 7365A with loss of the BnMs3 gene, which exhibits abnormal enlargement of the tapetal cells during meiosis. Later in development, the absence of the BnMs3 gene in the mutant results in a loss of the secretory function of the tapetum, as suggested by abortive callose dissolution and retarded tapetal degradation. The BnaC.Tic40 gene (equivalent to BnMs3) was isolated by a map-based cloning approach and was confirmed by genetic complementation. Sequence analyses suggested that BnaC.Tic40 originated from BolC.Tic40 on the Brassica oleracea linkage group C9, whereas its allele Bnms3 was derived from BraA.Tic40 on the Brassica rapa linkage group A10. The BnaC.Tic40 gene is highly expressed in the tapetum and encodes a putative plastid inner envelope membrane translocon, Tic40, which is localized into the chloroplast. Transmission electron microscopy (TEM) and lipid staining analyses suggested that BnaC.Tic40 is a key factor in controlling lipid accumulation in the tapetal plastids. These data indicate that BnaC.Tic40 participates in specific protein translocation across the inner envelope membrane in the tapetal plastid, which is required for tapetal development and function.     

Map-based cloning of a recessive genic male sterility locus in Brassica napus L. and development of its functional marker

We previously mapped one male-sterile gene (Bnms3) from an extensively used recessive genic male sterility line (9012AB) in Brassica napus to a 0.14-cM genomic region. In this study, two highly homologous BAC contigs possibly containing the candidate BnMs3 gene were identified using a map-based cloning strategy. A BnMs3-linked SCAR marker (DM1) capable of differentiating the subgenomes between B. rapa and the B. oleracea aided mapping of BnMs3 on the contig derived from the B. napus chromosome C9. One representative BAC clone was sequenced from each of the two contigs and resulted in a larger number of markers according to the sequence difference between the two clones. To isolate BnMs3, these markers were then analyzed in another two BC(1) populations with different genetic backgrounds. This assay allowed for a delimitation of the mutated functional region of BnMs3 to a 9.3-kb DNA fragment. Gene prediction suggested that one complete open reading frame (ORF, ORF2) and partial CDS fragments of ORF1 and ORF3 reside in this fragment. Sequence comparison and genetic transformation eventually indicated that ORF1 (designated as BnaC9.Tic40), an analogue of the Arabidopsis gene AT5G16620 which encodes a translocon of the inner envelope of chloroplasts 40 (Tic40), is the only candidate gene of BnMs3. Furthermore, two distinct mutation types in ORF1 both causing the male-sterile phenotype were individually revealed from 9012A and the temporary maintainer line T45. The molecular mechanism of this male sterility as well as the application of BnMs3-associated functional and cosegregated markers in true breeding programs was also discussed.     

Fine mapping of a recessive genic male sterility gene (Bnms3) in rapeseed (Brassica napus) with AFLP- and Arabidopsis-derived PCR markers

9012AB, a recessive genic male sterility (RGMS) line developed from spontaneous mutation in Brassica napus (Chen et al. in Acta Agron Sin 24:431-438, 1998), has been playing an increasing role in hybrid cultivar development in China. The male sterility of 9012AB is controlled by two recessive genes (designated Bnms3 and Bnms4) interacting with one recessive epistatic suppressor gene (esp). Previous study has identified seven AFLP markers, six of which were co-segregated with the Bnms3 gene in a small population (Ke et al. in Plant Breed 124:367-370, 2005). By cloning these AFLP markers and their flanking sequences, five of the six co-segregated markers were successfully converted into sequence characterized amplified region (SCAR) markers. For fine mapping of the Bnms3 gene, these SCAR markers were analyzed in a NIL population of 4,136 individuals. The Bnms3 gene was then genetically mapped to a region of 0.56 cM, with 0.15 cM from marker SEP8 and 0.41 from marker SEP4, respectively. BLAST analysis with these SCAR marker sequences identified a collinear genomic region in Arabidopsis chromosome 5, from which two specific PCR markers further narrowed the Bnms3 locus from an interval of 0.56 to 0.14 cM. These results provide additional information for map-based cloning of the Bnms3 gene and will be helpful for marker-assisted selection (MAS) of elite RGMS lines and maintainers.     

Towards map-based cloning: fine mapping of a recessive genic male-sterile gene (BnMs2) in Brassica napus L. and syntenic region identification based on the Arabidopsis thaliana genome sequences

S45AB, a recessive genic male sterile (RGMS) line, originated as a spontaneous mutant in Brassica napus cv. Oro. The genotypes of sterile (S45A) and fertile plants (S45B) are Bnms1ms1ms2ms2 and BnMs1ms1ms2ms2, respectively. In our previous studies, Yi et al. (Theor Appl Genet 113:643–650, 2006) mapped the BnMs1 locus to a region of 0.4 cM, candidates of which have been identified and genetic transformation is in progress. We describe the fine mapping of BnMs2 exploiting amplified fragment length polymorphism (AFLP) and amplified consensus genetic marker (ACGM) methodologies, and the identification of a collinear region probably containing BnMs2 orthologue in Arabidopsis thaliana. A near isogenic line (NIL) population S4516AB which segregated for BnMs2 locus was generated by crossing, allelism testing and repeated full-sib mating. From the survey of 1,024 AFLP primer combinations, 12 tightly linked AFLP markers were obtained and five of them were successfully converted into co-dominant or dominant sequence characterized amplified region (SCAR) markers. A population of 2,650 sterile plants was screened using these markers and a high-resolution map surrounding BnMs2 was constructed. The closest AFLP markers flanking BnMs2 were 0.038 and 0.075 cM away, respectively. Subsequently, an ACGM marker was developed to delimit the BnMs2 locus at an interval of 0.075 cM. We extended marker sequences to perform BlastN searches against the Arabidopsis genome and identified a collinear region containing 68 Arabidopsis genes, in which the orthologue of BnMs2 might be included. We further integrated BnMs2 linked AFLP or SCAR markers to two doubled-haploid (DH) populations derived from the crosses Tapidor × Ningyou7 (Qiu et al., Theor Appl Genet 114:67–80, 2006) and Quantum × No.2127-17 (available in our laboratory), and BnMs2 was mapped on N16. Molecular markers developed from these investigations will facilitate the marker-assisted selection (MAS) of RGMS lines, and the fine map and syntenic region identified will greatly hasten the process of positional cloning of BnMs2 gene.     

Comparison of Flowering Time Genes in Brassica Rapa, B. Napus and Arabidopsis Thaliana

The major difference between annual and biennial cultivars of oilseed Brassica napus and B. rapa is conferred by genes controlling vernalization-responsive flowering time. These genes were compared between the species by aligning the map positions of flowering time quantitative trait loci (QTLs) detected in a segregating population of each species. The results suggest that two major QTLs identified in B. rapa correspond to two major QTLs identified in B. napus. Since B. rapa is one of the hypothesized diploid parents of the amphidiploid B. napus, the vernalization requirement of B. napus probably originated from B. rapa. Brassica genes also were compared to flowering time genes in Arabidopsis thaliana by mapping RFLP loci with the same probes in both B. napus and Arabidopsis. The region containing one pair of Brassica QTLs was collinear with the top of chromosome 5 in A. thaliana where flowering time genes FLC, FY and CO are located. The region containing the second pair of QTLs showed fractured collinearity with several regions of the Arabidopsis genome, including the top of chromosome 4 where FRI is located. Thus, these Brassica genes may correspond to two genes (FLC and FRI) that regulate flowering time in the latest flowering ecotypes of Arabidopsis.     

Conservation of the microstructure of genome segments in Brassica napus and its diploid relatives

The cultivated Brassica species are the group of crops most closely related to Arabidopsis thaliana (Arabidopsis). They represent models for the application in crops of genomic information gained in Arabidopsis and provide an opportunity for the investigation of polyploid genome formation and evolution. The scientific literature contains contradictory evidence for the dynamics of the evolution of polyploid genomes. We aimed at overcoming the inherent complexity of Brassica genomes and clarify the effects of polyploidy on the evolution of genome microstructure in specific segments of the genome. To do this, we have constructed bacterial artificial chromosome (BAC) libraries from genomic DNA of B. rapa subspecies trilocularis (JBr) and B. napus var Tapidor (JBnB) to supplement an existing BAC library from B. oleracea. These allowed us to analyse both recent polyploidization (under 10,000 years in B. napus) and more ancient polyploidization events (ca. 20 Myr for B. rapa and B. oleracea relative to Arabidopsis), with an analysis of the events occurring on an intermediate time scale (over the ca. 4 Myr since the divergence of the B. rapa and B. oleracea lineages). Using the Arabidopsis genome sequence and clones from the JBr library, we have analysed aspects of gene conservation and microsynteny between six regions of the genome of B. rapa with the homoeologous regions of the genomes of B. oleracea and Arabidopsis. Extensive divergence of gene content was observed between the B. rapa paralogous segments and their homoeologous segments within the genome of Arabidopsis. A pattern of interspersed gene loss was identified that is similar, but not identical, to that observed in B. oleracea. The conserved genes show highly conserved collinearity with their orthologues across genomes, but a small number of species-specific rearrangements were identified. Thus the evolution of genome microstructure is an ongoing process. Brassica napus is a recently formed polyploid resulting from the hybridization of B. rapa (containing the Brassica A genome) and B. oleracea (containing the Brassica C genome). Using clones from the JBnB library, we have analysed the microstructure of the corresponding segments of the B. napus genome. The results show that there has been little or no change to the microstructure of the analysed segments of the Brassica A and C genomes as a consequence of the hybridization event forming natural B. napus. The observations indicate that, upon polyploid formation, these segments of the genome did not undergo a burst of evolution discernible at the scale of microstructure.     

Linkage mapping of genes controlling resistance to white rust (Albugo candida) in Brassica rapa (syn. campestris) and comparative mapping to Brassica napus and Arabidopsis thaliana.

Genes for resistance to white rust (Albugo candida) in oilseed Brassica rapa were mapped using a recombinant inbred (RI) population and a genetic linkage map consisting of 144 restriction fragment length polymorphism (RFLP) markers and 3 phenotypic markers. Young seedlings were evaluated by inoculating cotyledons with A. candida race 2 (AC2) and race 7 (AC7) and scoring the interaction phenotype (IP) on a 0-9 scale. The IP of each line was nearly identical for the two races and the population showed bimodal distributions, suggesting that a single major gene (or tightly linked genes) controlled resistance to the two races. The IP scores were converted to categorical resistant and susceptible scores, and these data were used to map a single Mendelian gene controlling resistance to both races on linkage group 4 where resistance to race 2 had been mapped previously. A quantitative trait loci (QTL) mapping approach using the IP scores detected the same major resistance locus for both races, plus a second minor QTL effect for AC2 on linkage group 2. These results indicate that either a dominant allele at a single locus (Acal) or two tightly linked loci control seedling resistance to both races of white rust in the biennial turnip rape cultivar Per. The map positions of white rust resistance genes in B. rapa and Brassica napus were compared and the results indicate where additional loci that have not been mapped may be located. Alignment of these maps to the physical map of the Arabidopsis genome identified regions to target for comparative fine mapping using this model organism.     

Development of a high density integrated reference genetic linkage map for the multinational Brassica rapa Genome Sequencing Project

We constructed a high-density Brassica rapa integrated linkage map by combining a reference genetic map of 78 doubled haploid lines derived from Chiifu-401-42?× Kenshin (CKDH) and a new map of 190 F2 lines derived from Chiifu-401-42?× rapid cycling B. rapa (CRF2). The integrated map contains 1017 markers and covers 1262.0 cM of the B. rapa genome, with an average interlocus distance of 1.24 cM. High similarity of marker order and position was observed among the linkage groups of the maps with few short-distance inversions. In total, 155 simple sequence repeat (SSR) markers, anchored to 102 new bacterial artificial chromosomes (BACs) and 146 intron polymorphic (IP) markers were mapped in the integrated map, which would be helpful to align the sequenced BACs in the ongoing multinational Brassica rapa Genome Sequencing Project (BrGSP). Further, comparison of the B. rapa consensus map with the 10 B. juncea A-genome linkage groups by using 98 common IP markers showed high-degree colinearity between the A-genome linkage groups, except for few markers showing inversion or translocation. Suggesting that chromosomes are highly conserved between these Brassica species, although they evolved independently after divergence. The sequence information coming out of BrGSP would be useful for B. juncea breeding. and the identified Arabidopsis chromosomal blocks and known quantitative trait loci (QTL) information of B. juncea could be applied to improve other Brassica crops including B. rapa.     

Fine mapping of the recessive genic male-sterile gene (Bnms1) in Brassica napus L.

A recessive genic male sterility (RGMS) system, S45 AB, has been developed from spontaneous mutation in Brassica napus canola variety Oro, and is being used for hybrid cultivar development in China. The male sterility of S45 was controlled by two duplicated recessive genes, named as Bnms1 and Bnms2. In this study, a NIL (near-isogenic line) population from the sib-mating of S45 AB was developed and used for the fine mapping of the Bnms1 gene, in which the recessive allele was homozygous at the second locus. AFLP technology combined with BSA (bulked segregant analysis) was used. From a survey of 2,560 primer combinations (+3/+3 selective bases), seven AFLP markers linked closely to the target gene were identified, of which four were successfully converted to sequence characterized amplified region (SCAR) markers. For further analysis, a population of 1,974 individuals was used to map the Bnms1 gene. On the fine map, Bnms1 gene was flanked by two SCAR markers, SC1 and SC7, with genetic distance of 0.1 cM and 0.3 cM, respectively. SC1 was subsequently mapped on linkage group N7 using doubled-haploid mapping populations derived from the crosses Tapidor × Ningyou7 and DH 821 × DHBao 604, available at IMSORB, UK, and our laboratory, respectively. Linkage of an SSR marker, Na12A02, with the Bnms1 gene further confirmed its location on linkage group N7. Na12A02, 2.6 cM away from Bnms1, was a co-dominant marker. These molecular markers developed from this research will facilitate the marker-assisted selection of male sterile lines and the fine map lays a solid foundation for map-based cloning of the Bnms1 gene.     

A triallelic genetic male sterility locus in Brassica napus: an integrative strategy for its physical mapping and possible local chromosome evolution around it

Background and Aims

Spontaneous male sterility is an advantageous trait for both constructing efficient pollination control systems and for understanding the developmental process of the male reproductive unit in many crops. A triallelic genetic male-sterile locus (BnMs5) has been identified in Brassica napus; however, its complicated genome structure has greatly hampered the isolation of this locus. The aim of this study was to physically map BnMs5 through an integrated map-based cloning strategy and analyse the local chromosomal evolution around BnMs5.

Methods

A large F₂ population was used to integrate the existing genetic maps around BnMs5. A map-based cloning strategy in combination with comparative mapping among B. napus, Arabidopsis, Brassica rapa and Brassica oleracea was employed to facilitate the identification of a target bacterial artificial chromosome (BAC) clone covering the BnMs5 locus. The genomic sequences from the Brassica species were analysed to reveal the regional chromosomal evolution around BnMs5.

Key Results

BnMs5 was finally delimited to a 0·3-cM genetic fragment from an integrated local genetic map, and was anchored on the B. napus A8 chromosome. Screening of a B. napus BAC clone library and identification of the positive clones validated that JBnB034L06 was the target BAC clone. The closest flanking markers restrict BnMs5 to a 21-kb region on JBnB034L06 containing six predicted functional genes. Good collinearity relationship around BnMs5 between several Brassica species was observed, while violent chromosomal evolutionary events including insertions/deletions, duplications and single nucleotide mutations were also found to have extensively occurred during their divergence.

Conclusions

This work represents major progress towards the molecular cloning of BnMs5, as well as presenting a powerful, integrative method to mapping loci in plants with complex genomic architecture, such as the amphidiploid B. napus.     

Analysis of gene expression profile in pollen development of recessive genic male sterile <Emphasis Type="Italic">Brassica napus</Emphasis> L. line S45A

Male sterility in a near-isogenic line S45AB after 25 generations of subcrossing is controlled by two pairs of duplicate genes. The genotype of S45A is Bnms1Bnms1Bnms2Bnms2, and that of S45B is BnMs1Bnms1Bnms2Bnms2, respectively. Histological observations revealed that abnormal anther development appeared in the tapetum and pollen exine during the tetrad stage. This male sterility was characterized by hypertrophy of the tapetal cells at the tetrad stage and a complete lack of microspore exine after the release of microspores from the tetrads. To elucidate the mechanism of this recessive genic male sterility, the flower bud expression profiles of the S45A and S45B lines were analyzed using an Arabidopsis thaliana ATH1 oligonucleotide array. When compared with the S45B line, 69 genes were significantly downregulated, and 46 genes were significantly upregulated in the S45A line. Real-time polymerase chain reaction (PCR) was then used to verify the results of the microarray analysis, and the majority of the downregulated genes in the S45A line were abundantly and specifically expressed in the anther. The results of the real-time PCR suggest that Bnms1 might be involved in the metabolism of lipid/fatty acids, and the homologous mutation of Bnms1 may either block the biosynthesis of sporopollenin or block sporopollenin from being deposited on the microspore surface, thus, preventing pollen exine formation. The role of Bnms1 in the regulatory network of exine formation is also discussed as well. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A sequence-tagged linkage map of Brassica rapa

A detailed genetic linkage map of Brassica rapa has been constructed containing 545 sequence-tagged loci covering 1287 cM, with an average mapping interval of 2.4 cM. The loci were identified using a combination of 520 RFLP and 25 PCR-based markers. RFLP probes were derived from 359 B. rapa EST clones and amplification products of 11 B. rapa and 26 Arabidopsis. Including 21 SSR markers provided anchors to previously published linkage maps for B. rapa and B. napus and is followed as the referenced mapping of R1-R10. The sequence-tagged markers allowed interpretation of the pattern of chromosome duplications within the B. rapa genome and comparison with Arabidopsis. A total of 62 EST markers showing a single RFLP band were mapped through 10 linkage groups, indicating that these can be valuable anchoring markers for chromosome-based genome sequencing of B. rapa. Other RFLP probes gave rise to 2-5 loci, inferring that B. rapa genome duplication is a general phenomenon through 10 chromosomes. The map includes five loci of FLC paralogues, which represent the previously reported BrFLC-1, -2, -3, and -5 and additionally identified BrFLC3 paralogues derived from local segmental duplication on R3.     

Molecular validation of a multiple-allele recessive genic male sterility locus (BnRf) in Brassica napus L.

The recessive genic male sterility (RGMS) line 9012AB has been used successfully for rapeseed hybrid production in China. This male sterility was previously thought to be controlled by three independent genes (Bnms3, Bnms4, and BnRf). Here, we initially attempted to locate the BnMs4 locus and develop feasible molecular markers for application in practical rapeseed breeding. However, we found that three sequence characterized amplified region markers and five simple sequence repeat markers identified as linked to BnMs4 were also genetically associated with BnRf, suggesting the possible co-localization of these two loci. Moreover, we proved that four intron-based polymorphism markers tightly linked or co-segregated with BnRf could also be mapped to BnMs4 with a genetic distance ranging from 0.054 to 0.594?cM. Finally, integration of genetic maps around BnRf and BnMs4 allows for the physical restriction of both loci to a DNA fragment of about 50?kb. Systematic genetic tests also provided evidence that the candidate BnMs4 locus was allelic to the BnRf locus. These results confirmed a major modification of the sterility inheritance model in 9012A: specifically, that this male sterility was essentially controlled by two loci (BnMs3 and BnRf), whereas the previously designated BnMs4 locus (hereafter designated as BnRf ^a ) was just one allele of BnRf in addition to BnRf ^b (the allele from 9012A) and BnRf ^c (the allele from temporary maintainer), with a dominance relationship of BnRf ^a ?>?BnRf ^b ?>?BnRf ^c . This inheritance model will simplify the breeding process involved with this RGMS line, especially with the BnRf allele-specific molecular markers identified here.     

Sequence-level analysis of the diploidization process in the triplicated FLOWERING LOCUS C region of Brassica rapa

Strong evidence exists for polyploidy having occurred during the evolution of the tribe Brassiceae. We show evidence for the dynamic and ongoing diploidization process by comparative analysis of the sequences of four paralogous Brassica rapa BAC clones and the homologous 124-kb segment of Arabidopsis thaliana chromosome 5. We estimated the times since divergence of the paralogous and homologous lineages. The three paralogous subgenomes of B. rapa triplicated 13 to 17 million years ago (MYA), very soon after the Arabidopsis and Brassica divergence occurred at 17 to 18 MYA. In addition, a pair of BACs represents a more recent segmental duplication, which occurred approximately 0.8 MYA, and provides an exception to the general expectation of three paralogous segments within the B. rapa genome. The Brassica genome segments show extensive interspersed gene loss relative to the inferred structure of the ancestral genome, whereas the Arabidopsis genome segment appears little changed. Representatives of all 32 genes in the Arabidopsis genome segment are represented in Brassica, but the hexaploid complement of 96 has been reduced to 54 in the three subgenomes, with compression of the genomic region lengths they occupy to between 52 and 110 kb. The gene content of the recently duplicated B. rapa genome segments is identical, but intergenic sequences differ.     

Genome-wide comparative analysis of the Brassica rapa gene space reveals genome shrinkage and differential loss of duplicated genes after whole genome triplication

Background

Brassica rapa is one of the most economically important vegetable crops worldwide. Owing to its agronomic importance and phylogenetic position, B. rapa provides a crucial reference to understand polyploidy-related crop genome evolution. The high degree of sequence identity and remarkably conserved genome structure between Arabidopsis and Brassica genomes enables comparative tiling sequencing using Arabidopsis sequences as references to select the counterpart regions in B. rapa, which is a strong challenge of structural and comparative crop genomics.

Results

We assembled 65.8 megabase-pairs of non-redundant euchromatic sequence of B. rapa and compared this sequence to the Arabidopsis genome to investigate chromosomal relationships, macrosynteny blocks, and microsynteny within blocks. The triplicated B. rapa genome contains only approximately twice the number of genes as in Arabidopsis because of genome shrinkage. Genome comparisons suggest that B. rapa has a distinct organization of ancestral genome blocks as a result of recent whole genome triplication followed by a unique diploidization process. A lack of the most recent whole genome duplication (3R) event in the B. rapa genome, atypical of other Brassica genomes, may account for the emergence of B. rapa from the Brassica progenitor around 8 million years ago.

Conclusions

This work demonstrates the potential of using comparative tiling sequencing for genome analysis of crop species. Based on a comparative analysis of the B. rapa sequences and the Arabidopsis genome, it appears that polyploidy and chromosomal diploidization are ongoing processes that collectively stabilize the B. rapa genome and facilitate its evolution.