首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 468 毫秒
1.
The purpose of this research was to optimize the formulation factors for maximum in vitro permeation of gatifloxacin from aqueous drops through excised goat cornea and to evaluate the permeation characteristics of drug from selected marketed eyedrop formulations. Permeation studies were conducted by putting 1 mL of formulation on the cornea (0.67 cm2) fixed between the donor and receptor compartments of an all-glass modified Franz diffusion cell and measuring gatifloxacin concentration in the receptor (containing normal saline under stirring) by spectrophotometry at 291.5 nm, after 120 minutes. Raising the drug concentration of the drops increased the drug permeation but decreased the percent permeation and the in vitro ocular availability. Raising the pH of the formulation from pH 5 to 7.2 increased both the drug permeation and the in vitro ocular availability. Eyedrops containing benzalkonium chloride (BAK; 0.01% wt/vol) and disodium edetate (EDTA; 0.01% wt/vol) showed maximum permeation, followed by Zymar, BAK (0.01% wt/vol), Gatilox, Gatiquin, and Gate (statistically significantP<.05 compared with control). In vitro titration of the formulations with 0.1N NaOH indicated the presence of a buffer in Zymar (pH 6) and Gate (pH 5.8), which may cause irritation and induce lacrimation, resulting in reduced ocular availability in vivo. Thus, formulation with BAK and EDTA, which is unbuffered, has a better likelihood of being absorbed in vivo. The BAK-EDTA formulation significantly (P<.05) increased the permeation of gatifloxacin through paired excised corneas of goat, sheep, and buffalo, compared with the control formulation. The goat cornea showed the greatest increase in permeation, followed by the sheep and buffalo corneas. Published: July 7, 2006  相似文献   

2.
The influence of formulation additives, e.g. preservative, antioxidant and viscolizing agents on in vitro transcorneal permeation of ketorolac tromethamine from 0.5%(w/v) aqueous drop was studied using goat cornea. Permeation characteristics of drug, from selected formulations, through excised rabbit cornea were also evaluated. Aqueous solution of ketorolac tromethamine (0.5% w/v), pH 6.5 or 7.0 having ionic strength 0.2, was prepared. To this solution perservatives either alone or in combination with other additives were added to have drops of various composition. Permeation studies with goat cornea showed maximum permeation of ketorolac tromethamine from formulation containing benzalkonium chloride and disodium edetate. Increase in viscosity of drop resulted in decreased permeation of drug. Formulation containing benzalkonium chloride and disodium edetate also increased permeation of drug through rabbit cornea. Cumulative permeation of drug through rabbit cornea was found to be 2.3-2.4 fold higher than that observed with goat cornea.  相似文献   

3.
Screening of different adjuvants, namely, suspending agents, phagostimulants, stickers, antimicrobial agents, and UV screens to develop aqueous biopesticidal suspensions of Bacillus thuringiensis (Bt) variety kurstaki HD-1 fermented broths, specifically, nonhydrolyzed sludge, hydrolyzed sludge, starch industry wastewater, and soya (commercial medium), were investigated. The selected suspending agents [20% (wt:vol)] included sorbitol, sodium monophosphate, and sodium metabisulfite with corresponding suspendibility of 74-92, 69-85, and 71-82%, respectively. Molasses [0.2% (wt:vol)] increased adherence by 84-90% for all fermented broths. The optimal phagostimulants [0.5% (wt:vol)], namely, soya and molasses, caused entomotoxicity increase of 3-13 and 7-13%, respectively. Sorbic and propionic acids showed high antimicrobial action [0.5% (wt:vol)], irrespective of fermentation medium. Sodium lignosulfonate, molasses, and Congo red, when used as UV screens [0.2% (wt:vol)], showed percent corresponding entomotoxicity losses of 3-5, 0.5-5 and 2-16, respectively. The Bt formulations, when exposed to UV radiation, showed higher half-lives (with and without UV screens) than the fermented broths or semisynthetic soya medium and commercial Bt formulation. UV screen-amended nonhydrolyzed, hydrolyzed, and starch industry wastewater formulations showed 1.3-1.5-fold higher half-lives than commercial Bt formulation. Thus, the recommended formulation comprises sorbitol, sodium monophosphate, sodium metabisulfite (suspending agents); molasses, soya flour (phagostimulants); molasses and skimmed milk powder (rainfasteners); sorbic and propionic acids (antimicrobial agents) and sodium lignosulfate; and molasses and Congo red (UV screens). These waste-based Bt formulations offer better UV resistance in comparison with commercial formulation.  相似文献   

4.
An objective of the present investigation was to prepare and evaluate Eudragit-coated pectin microspheres for colon targeting of 5-fluorouracil (FU). Pectin microspheres were prepared by emulsion dehydration method using different ratios of FU and pectin (1:3 to 1:6), stirring speeds (500–2000 rpm) and emulsifier concentrations (0.75%–1.5% wt/vol). The yield of preparation and the encapsulation efficiencies were high for all pectin microspheres. Microspheres prepared by using drug:polymer ratio 1:4, stirring speed 1000 rpm, and 1.25% wt/vol concentration of emulsifying agent were selected as an optimized formulation. Eudragit-coating of pectin microspheres was performed by oil-in-oil solvent evaporation method using coat: core ratio (5:1). Pectin microspheres and Eudragit-coated pectin microspheres were evaluated for surface morphology, particle size and size distribution, swellability, percentage drug entrapment, and in vitro drug release in simulated gastrointestinal fluids (SGF). The in vitro drug release study of optimized formulation was also performed in simulated colonic fluid in the presence of 2% rat cecal content. Organ distribution study in albino rats was performed to establish the targeting potential of optimized formulation in the colon. The release profile of FU from Eudragit-coated pectin microspheres was pH dependent. In acidic medium, the release rate was much slower; however, the drug was released quickly at pH 7.4. It is concluded from the present investigation that Eudragit-coated pectin microspheres are promising controlled release carriers for colon-targeted delivery of FU. Published: February 16, 2007  相似文献   

5.
Nepafenac is a nonsteroidal anti-inflammatory drug (NSAID), currently only available as 0.1% ophthalmic suspension (Nevanac®). This study utilized hydroxypropyl-β-cyclodextrin (HPBCD) to increase the water solubility and trans-corneal permeation of nepafenac. The nepafenac-HPBCD complexation in the liquid and solid states were confirmed by phase solubility, differential scanning calorimetry (DSC), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and nuclear magnetic resonance spectroscopy (NMR) analyses. Nepafenac 0.1% ophthalmic solution was formulated using HPBCD (same pH and osmolality as that of Nevanac®) and pig eye trans-corneal permeation was studied versus Nevanac®. Furthermore, nepafenac content in cornea, sclera, iris, lens, aqueous humor, choroid, ciliary body, retina, and vitreous humor was studied in a continuous isolated pig eye perfusion model in comparison to the suspension and Nevanac®. Permeation studies using porcine corneas revealed that the solution formulation had a permeation rate 18 times higher than Nevanac®. Furthermore, the solution had 11 times higher corneal retention than Nevanac®. Drug distribution studies using porcine eyes revealed that the solution formulation enables detectable levels in various ocular tissues while the drug was undetectable by Nevanac®. The ocular solution formulation had a significantly higher drug concentration in the cornea compared to the suspension or Nevanac®.  相似文献   

6.
Feasibility of developing a transdermal drug delivery of fluoxetine has been investigated. Permeation studies of fluoxetine across human cadaver skin were carried out using Franz diffusion cells. The receptor phase consisted of pH 7.4 phosphate buffer maintained at 37°C. Permeation enhancement of fluoxetine, either in the salt or base form, was achieved using various enhancers like azone, SR-38, and ethanol. Various O/W microemulsion systems of fluoxetine were developed to study their effect on the skin permeation of fluoxetine. The results indicated that ethanol at 65% vol/vol was able to increase the permeation of fluoxetine the most, while microemulsion systems showed decrease in the permeation of fluoxetine. The permeation of fluoxetine obtained using a 65% vol/vol ethanolic solution was found to be sufficient to deliver the required dose (20–80 mg) from a patch of feasible size. The results seem promising for developing a transdermal drug delivery system of fluoxetine. Published: September 30, 2005  相似文献   

7.
Candida peltata (NRRL Y-6888) produced beta-glucosidase when grown in liquid culture on various substrates (glucose, xylose, L-arabinose, cellobiose, sucrose, and maltose). An extracellular beta-glucosidase was purified 1,800-fold to homogeneity from the culture supernatant of the yeast grown on glucose by salting out with ammonium sulfate, ion-exchange chromatography with DEAE Bio-Gel A agarose, Bio-Gel A-0.5m gel filtration, and cellobiose-Sepharose affinity chromatography. The enzyme was a monomeric protein with an apparent molecular weight of 43,000 as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration. It was optimally active at pH 5.0 and 50 degrees C and had a specific activity of 108 mumol.min-1.mg of protein-1 against p-nitrophenyl-beta-D-glucoside (pNP beta G). The purified beta-glucosidase readily hydrolyzed pNP beta G, cellobiose, cellotriose, cellotetraose, cellopentaose, and cellohexaose, with Km values of 2.3, 66, 39, 35, 21, and 18 mM, respectively. The enzyme was highly tolerant to glucose inhibition, with a Ki of 1.4 M (252 mg/ml). Substrate inhibition was not observed with 40 mM pNP beta G or 15% cellobiose. The enzyme did not require divalent cations for activity, and its activity was not affected by p-chloromercuribenzoate (0.2 mM), EDTA (10 mM), or dithiothreitol (10 mM). Ethanol at an optimal concentration (0.75%, vol/vol) stimulated the initial enzyme activity by only 11%. Cellobiose (10%, wt/vol) was almost completely hydrolyzed to glucose by the purified beta-glucosidase (1.5 U/ml) in both the absence and presence of glucose (6%). Glucose production was enhanced by 8.3% when microcrystalline cellulose (2%, wt/vol) was treated for 24 h with a commercial cellulase preparation (cellulase, 5 U/ml; beta-glucosidase, 0.45 U/ml) that was supplemented with purified beta-glucosidase (0.4 U/ml).  相似文献   

8.
The objective of this study was to determine the effect of ethylenediamine core PAMAM dendrimers, on the release of nifedipine suspended in aqueous gels and to correlate release to the increase in solubility afforded by the dendrimers. Drug release from aqueous 5% HPMC gels containing nifedipine (2% wt/vol) through 0.2-μm membranes was measured using Enhancer cells and 50% ethanolic solution as the receptor medium. The release from gels containing PAMAM G-3 and G-5 (0.25%–1% wt/vol) was compared with gels containing the cosolvent isopropyl alcohol (10%–80% vol/vol). PAMAM dendrimers significantly increased the solubility of nifedipine. This caused a significant increase in the release rate of nifedipine from the gel suspensions. The increase in drug release depended on the concentration and generation size of the dendrimers added. For higher generations (G-5) lower concentrations were needed to obtain equivalent increases in release. Although the increase in solubility and release was not as high as from gels containing high concentrations of the cosolvent isopropyl alcohol, the dendrimers prevented the recrystallization of the drug that was observed when the gels containing isopropyl alcohol were left open. Published: October 24, 2005  相似文献   

9.
The purpose of this research was to study mucoadhesive bilayer buccal tablets of propranolol hydrochloride using the bioadhesive polymers sodium alginate (Na-alginate) and Carbopol 934P (CP) along with ethyl cellulose as an impermeable backing layer. The tablets were evaluated for weight variation, thickness, hardness, friability, surface pH, mucoadhesive strength, swelling index, in vitro drug release, ex vivo drug permeation, ex vivo mucoadhesion, and in vivo pharmacodynamics in rabbits. Tablets containing Na-alginate and CP in the ratio of 5∶1 (F2) had the maximum percentage of in vitro drug release without disinte-gration in 12 hours. The swelling index was proportional to Na-alginate content and inversely proportional to CP content. The surface pH of all tablets was found to be satis-factory (7.0±1.5), close to neutral pH; hence, buccal cavity irritation should not occur with these tablets. The mechanism of drug release was found to be non-Fickian diffusion and followed zero-order kinetics. The formulation F4 was optimized based on good biodhesive strength (28.9±0.99 g) and sustained in vitro drug permeation (68.65%±3.69% for 12 hours). The behavior of formulation F4 was examined in human saliva, and both the drug and the buccal tablet were found to be stable. The formulation F4 was applied to rabbit oral mucosa for in vivo studies. The formulation inhibited isoprenaline-induced tachycardia. The studies conducted in rabbits confirmed the sustained release as compared with intravenous administration. Published: September 21, 2007  相似文献   

10.
This article describes conditions to optimize the yield of viable protoplasts from callus tissue of Asparagus densiflorus cv. Sprengeri and their subsequent regeneration into plantlets. Callus tissue was initiated by culturing spear sections (5–7 mm) on Murashige and Skoog (MS) medium supplemented with 0.8% (wt/vol) Bacto agar, 3% (wt/vol) sucrose, 0.5 mg/l each of nicotinic acid, pyridoxine-HCl, and thiamine-HCl, 1 mg/l p-chlorophenoxyaceticacid (pCPA) and 1 mg/l 6-benzylaminopurine (BAP). The maximum protoplast yield was obtained in a mixture of 1% (wt/vol) Cellulysin, 0.8% (wt/vol) Rhozyme HP 150 and 0.3% (wt/vol) Macerase, dissolved in cell protoplast wash salt solution with 7 mm CaCl2 .2H2O, 3 mm MES, 0.6 m glucose, and 0.1 m mannitol. First divisions were observed after 3–4 days of initial culture. The plating efficiency was highest (7.8%) in half-strength MS semisolid medium containing 1 g/l glutamine, 0.6 m glucose, 0.1 m mannitol, 0.5 mg/l folic acid, 0.05 mg/l biotin, 2 mg/l ascorbic acid, 1 mg/l α-naphthaleneacetic acid, 0.5 mg/l zeatin, and 0.1% (wt/vol) Gelrite. Protoplast-derived microcolonies and microcalli were cultured on the same medium on which the primary callus culture was initiated. After 10–12 weeks, calli were transferred to shoot regeneration medium containing MS salts, 1 mg/l BAP, 0.5 mg/l pCPA and 0.2% Gelrite. Shoots (3–4 cm) were then transferred to MS rooting medium with 2 mg/l indole-3-butyric acid, and 0.2% Gelrite. Plantlets were obtained within 4–5 weeks. Received: 9 August 1995 / Revision received: 27 June 1997 / Accepted: 17 July 1997  相似文献   

11.
AimsThe aim of the present investigation was to develop a nanoemulsion (NE) gel formulation for the transdermal delivery of meloxicam (MLX) in order to ensure maximum controlled and sustained drug release capacity.Main methodsThe MLX containing NE gel was prepared and characterized for particle size, zeta potential, pH, rheology, in vitro drug release, in vitro skin permeation, and in vitro hemolysis. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) of MLX-NE gel treated rat skin was performed to investigate the skin permeation mechanism of meloxicam from NE gel. Skin permeation potential of the developed gel formulation was assessed using confocal laser scanning microscopy (CLSM). The in vivo toxicity of MLX-NE gel was assessed by histopathological examination in rat. The rat paw edema test was performed to evaluate the anti-inflammatory activity of MLX-NE gel.Key findingsPercutaneous absorption studies demonstrated a higher permeation of meloxicam from NE gel, than the drug solution. FTIR and DSC studies supported stratum corneum lipid extraction as a possible penetration enhancer mechanism for MLX-NE gel. CLSM studies confirmed the permeation of the NE gel formulation to the deeper layers of the skin (up to 130 μm). MLX-NE gel turned out to be non-irritant, biocompatible, and provided maximum inhibition of paw edema in rats over 24 h in contrast to MLX solution.SignificanceThe nanoemulsion gel formulation may hold promise as an effective alternative for the transdermal delivery of meloxicam.  相似文献   

12.
The purpose of this research was to apply vacuum foam drying (VFD) for processing of LaSota virus and to screen formulation additives for its stability. The aqueous dispersion of harvest containing sucrose or trehalose in combination with additive (monosaccharides, polymers, N-Z-amine) was prepared. The diluted dispersions in vials were vacuum concentrated, foamed to form a continuous structure, and vacuum dried. The products were evaluated for foam characteristics, residual moisture, virus titer, x-ray diffraction pattern, and stability profile. The foamability increased with solid content in solutions. The foamability of sucrose was enhanced with incorporation of N-Z-amine (10% and 15% wt/vol) and polyvinyl pyrrolidone (PVP K30, 3% wt/vol). The fructose- or galactose-containing mixtures were deposited irregularly on the vial surface. The virus titer increased with disaccharides in the formulation. Sucrose provided better protection than trehalose. Unlike lyophilization, N-Z-amine with sucrose protected the virus from Millard’s Browning. Amino acids do not have a catalytic effect on hydrolysis of sucrose during VFD. Monosaccharides were ineffective. A synergistic effect of PVP K30 or polyethylene glycol 6000 (3% wt/vol) with N-Z-amine provided the maximum virus titer (6.97 and 7.15, respectively). This formulation retained the desired virus potency at 5°, 25°, and 40°C. The diffraction pattern revealed that a threshold concentration of N-Z-amine was required for inhibiting crystallization of sucrose during VFD. VFD was successfully applied to produce a solid LaSota formulation. The products were amorphous and did not devitrify on storage. Published: July 21, 2006  相似文献   

13.
The purpose of this research was to mask the intensely bitter taste of ondansetron HCl and to formulate a rapiddisintegrating tablet (RDT) of the taste-maske drug. Taste masking was done by complexing ondansetron HCl with aminoalkyl methacrylate copolymer (Eudragit EPO) in different ratios by the precipitation method. Drug-polymer complexes (DPCs) were tested for drug content, in vitro taste in simulated salivary fluid (SSF) of pH 6.2, and molecular property. Complex that did not release drug in SSF was considered taste-masked and selected for formulation RDTs. The complex with drug-polymer ratio of 8∶2 did not show drug release in SSF; therefore, it was selected. The properties of tablets such as tensile strength, wetting time, water absorption ratio, in vitro disintegration time, and disintegration in the oral cavity were investigated to elucidate the wetting and disintegration characteristics of tablets. Polyplasdone XL-10 7% wt/wt gave the minimum disintegration time. Tablets of batch F4 containing spray-dried mannitol and microcrystalline cellulose in the ratio 1∶1 and 7% wt/wt Polyplasdone XL-10 showed faster disintegration, within 12.5 seconds, than the marketed tablet (112 seconds). Good correlation between in vitro disintegration behavior and in the oral cavity was recognized. Taste evaluation of RDT in human volunteers revealed considerable taste masking with the degree of bitterness below threshold value (0.5) ultimately reaching to 0 within 15 minutes, whereas ondansetron HCl was rated intensely bitter with a score of 3 for 10 minutes. Tablets of batch F4 also revealed rapid drug release (t90, 60 seconds) in SGF compared with marketed formulation (t90, 240 seconds;P<.01). Thus, results conclusively demonstrated successful masking of taste and rapid disintegration of the formulated tablets in the oral cavity. Published: June 22, 2007  相似文献   

14.
Bacillus thuringiensis is the most widely used biopesticide among many methods available to control insects. To make a saleable product, B. thuringiensis must be substantially concentrated by removal of water and formulated to improve longevity, efficacy, and ease of transport of the product. B. thuringiensis subsp. aizawai culture broth as an active ingredient was mixed with various adjuvants and then spray dried. The optimum conditions for spray drying were found to be an outlet temperature of 60-85 degrees C and an inlet temperature of 120-180 degrees C. Various adjuvants had different effects on physical and biological properties of the dried product. Gelatinized tapioca starch and milk powder improved suspensibility but adversely affected wettability of the dried formulated product. Vegetable oil and Tween 20 enhanced wettability but resulted in poor suspensibility. Silica fume was used to enhance flowability because it reduced clumping and caking of the powder resulting from the addition of vegetable oil. Formulation containing 10% wt:wt B. thuringiensis, 10% wt:wt gelatinized tapioca starch, 10% wt:wt sucrose, 38% wt:wt tapioca starch, 20% wt:wt milk powder, 10% wt:wt silica fume, 2% wt:wt polyvinyl alcohol, 5% vol:vol Tween 20, 1% vol:vol refined rice bran oil, and 1% vol:vol antifoam solution was found to be optimum in terms of the physical and biological properties of the dried product. This formulation had 55% suspensibility, 24 s for wetting time, and 5.69 x 10(4) CFU/ml of LC50 value against Spodoptera exigua larvae.  相似文献   

15.
A transdermal formulation of indomethacin (IMC) was developed by incorporation into cholesteryl cetyl carbonate (CCC). The liquid crystalline phase properties of the IMC–CCC mixture were detected by polarized light microscopy and differential scanning calorimetry. A low drug loading was obtained (1–5 %) similar to that used in conventional topical IMC in a clinical setting. A controlled release of IMC was found over 12 h. A low amount of IMC in 1 % IMC–CCC permeated the stratum corneum. Further formulation development has been carried out by the addition of lauryl alcohol into 5 % IMC–CCC mixture it was found that the permeation of IMC was significantly improved to 45 % within 24 h.KEY WORDS: permeation, skin, transdermal  相似文献   

16.
The objective of this study was to evaluate the effect of 2 independent formulation variables on the drug release from a novel doughnut-shaped minitablet (DSMT) in order to optimize formulations for intraocular drug delivery. Formulations were based on a 3(2) full-factorial design. The 2 independent variables were the concentration of Resomer (% wt/wt) and the type of Resomer grade (RG502, RG503, and RG504), respectively. The evaluated response was the drug release rate constant computed from a referenced marketed product and in vitro drug release data obtained at pH 7.4 in simulated vitreous humor. DSMT devices were prepared containing either of 2 model drugs, ganciclovir or foscarnet, using a Manesty F3 tableting press fitted with a novel central-rod, punch, and die setup. Dissolution data revealed biphasic drug release behavior with 55% to 60% drug released over 120 days. The inherent viscosity of the various Resomer grades and the concentration were significant to achieve optimum release rate constants. Using the resultant statistical relationships with the release rate constant as a response, the optimum formulation predicted for devices formulated with foscarnet was 70% wt/wt of Resomer RG504, while 92% wt/wt of Resomer RG503 was ideal for devices formulated with ganciclovir. The results of this study revealed that the full-factorial design was a suitable tool to predict an optimized formulation for prolonged intraocular drug delivery.  相似文献   

17.
A Technique for Collection of Exudate from Pea Seedlings   总被引:2,自引:2,他引:0  
Ethylenediaminetetraacetic acid (EDTA), at concentrations higher than 1.0 millimolar, is phytotoxic to etiolated seedlings of Pisum sativum. Substantial vascular exudation from pea epicotyls could be obtained without tissue damage at 0.5 millimolar EDTA if the solution was buffered at pH 7.5 with sodium N-2-hydroxyethylpiperazine-N′-2-ethanesulfonic acid. Treated seedlings exuded 950 micrograms (leucine equivalents) of ninhydrin-positive material per day and 870 micrograms (glucose equivalents) of anthrone-positive material per day. Amino acid analysis showed the exudate to have glutamine as the major amido nitrogen containing compound and sucrose was shown to be the major sugar. Radiolabeled tryptophan and sucrose applied to cotyledons were transferred through the epicotyl and into the collection medium. The pH profile for exudation shows half maximal exudation at pH 7.2, indicating the promotion of exudation by EDTA is probably not due simply to Ca2+ chelation.  相似文献   

18.
Summary The morphogenetic capacity of matureJuniperus oxycedrus L. leaves cultured in vitro has been studied, noting nutritive, hormonal, and environmental factors inducing differentiation and development of adventitious shoots. Bud primordia formed directly from the leaves. Highest bud differentiation rates were obtained when the explants were cultured for at least 21 days on a modified Schenk and Hildebrandt solidified medium containing 0.5 μM benzyladenine under a 16-h photoperiod. Maximum bud development and elongation was achieved on cytokinin-free medium containing 4% (wt/vol) sucrose and 0.05% (wt/vol) activated charcoal. Regenerated shoots were excised and induced to root on media with auxin. Rooting percentages up to 100% were obtained in the presence of 2.5 μM naphthaleneacetic acid and 4% (wt/vol) sucrose. The inclusion of activated charcoal in the root induction medium drastically reduced the number of rooted shoots. Following conventional procedures, plantlets were ultimately established in soil.  相似文献   

19.
The objective of the present study was to prepare mucoadhesive in situ nasal gels with mucilage isolated from fig fruits (Ficus carica, family: Moraceae) containing midazolam hydrochloride. Nasal gels of midazolam were prepared using three different concentrations (0.5%, 1.0% and 1.5% w/v) of F. carica mucilage (FCM) and synthetic polymers (hydroxypropylmethyl cellulose and Carbopol 934). Evaluation of FCM showed that it was as safe as the synthetic polymers for nasal administration. In situ gels were prepared with mixture Pluronic F127 and mucoadhesive agents. Evaluation of the prepared gels was carried out, including determination of viscosity, texture profile analysis and mucoadhesive strength. In vitro drug permeation study was conducted with the gels prepared with and without permeation enhancer (0.5% w/v sodium taurocholate) using excised goat nasal mucosa. In vitro permeation profiles were evaluated, and histological study of nasal mucosae before and after permeation study was also conducted to determine histological change, if any. In vivo experiments conducted in rabbits further confirmed that in situ nasal gels provided better bioavailability of midazolam than the gels prepared from synthetic mucoadhesive polymers. It was observed that the nasal gel containing 0.5% FCM and 0.5% sodium taurocholate exhibited appropriate rheological, mechanical and mucoadhesive properties and showed better drug release profiles. Moreover, this formulation produced no damage to the nasal mucosa that was used for the permeation study, and absolute bioavailability was also higher compared to gels prepared from synthetic polymers.  相似文献   

20.
Cetirizine is a piperazine-derived second-generation antihistaminic drug recommended for treatment of pruritus associated with atopic dermatitis. The present investigation encompasses development of a nanosized novel elastic vesicle-based topical formulation of cetirizine dihydrochloride using combination of Phospholipon® 90G and edge activators with an aim to have targeted peripheral H1 antihistaminic activity. The formulation was optimized with respect to phospholipid/drug/charge inducer ratio along with type and concentration of edge activator. The optimized formulation was found to be satisfactory with respect to stability, drug content, entrapment efficiency, pH, viscosity, vesicular size, spreadability, and morphological characteristics. The ex vivo permeation studies through mice skin were performed using Franz diffusion cell assembly. It was found that the mean cumulative percentage amount permeated in 8 h was almost twice (60.001 ± 0.332) as compared to conventional cream (33.268 ± 0.795) and aqueous solution of drug (32.616 ± 0.969), suggesting better penetration and permeation of cetirizine from the novel vesicular delivery system. Further, therapeutic efficacy of optimized formulation was assessed against oxazolone-induced atopic dermatitis in mice. It was observed that the developed formulation was highly efficacious in reducing the itching score (4.75 itches per 20 min) compared to conventional cream (9.75 itches per 20 min) with profound reduction in dermal eosinophil count and erythema score. To conclude, a novel vesicular, dermally safe, and nontoxic topical formulation of cetirizine was successfully developed and may be used to treat atopic dermatitis after clinical investigation.KEY WORDS: atopic dermatitis, cetirizine, elastic vesicles, oxazolone, topical  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号