Plastic Solar Cells: Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend (Adv. Energy Mater. 1/2011)

Developing a better understanding of the evolution of morphology in plastic solar cells is the key to designing new materials and structures that achieve photoconversion efficiencies greater than 10%. In the most extensively characterized system, the poly(3‐hexyl thiophene) (P3HT):[6,6]‐phenyl‐C₆₁‐butyric‐acid‐methyl‐ester (PCBM) bulk heterojunction, the origins and evolution of the blend morphology during processes such as thermal annealing are not well understood. In this work, we use a model system, a bilayer of P3HT and PCBM, to develop a more complete understanding of the miscibility and diffusion of PCBM within P3HT during thermal annealing. We find that PCBM aggregates and/or molecular species are miscible and mobile in disordered P3HT, without disrupting the ordered lamellar stacking of P3HT chains. The fast diffusion of PCBM into the amorphous regions of P3HT suggests the favorability of mixing in this system, opposing the belief that phase‐pure domains form in BHJs due to immiscibility of these two components.     

High Performance Organic Photovoltaic Cells Using Polymer‐Hybridized ZnO Nanocrystals as a Cathode Interlayer

Solution‐processed zinc oxide nanocrystals (ZnO NCs) hybridized with insulating poly(ethylene glycol) (PEG) are introduced as a cathode interlayer in bulk heterojunction organic photovoltaic cells based on poly(3‐hexylthiophene) (P3HT):(6,6)‐phenyl‐C61 butyric acid methyl ester (PC₆₁BM) blends. The performance of devices with ZnO‐PEG interlayers exhibit an excellent maximum power conversion efficiency (PCE) of 4.4% with a fill factor (FF) of 0.69 under optimized conditions. This enhanced device performance is attributed to decreased series resistance from the hole blocking properties of ZnO, as well as the facilitated electron transport due to the reduced area of ZnO domain boundaries upon addition of PEG. The addition of PEG also lowers the electron affinity of ZnO, which leads to a nearly Ohmic contact at the polymer/metal interface. Moreover, the ZnO‐PEG interlayer serves as an optical spacer that enhances light absorption and thereby increases the photocurrent. The addition of PEG permits control over layer thickness and refractive indices. Improved photon energy absorption is supported by optical simulations. Devices with highly stable metals such as Ag and Au also show dramatically enhanced performance comparable to conventional devices with Al cathode. Due to its simplicity and excellent characteristics, this multifunctional interlayer is suitable for high performance printed photovoltaic cells.     

Spontaneous Charge Transfer and Dipole Formation at the Interface Between P3HT and PCBM

In the pursuit of developing new materials for more efficient bulk‐heterojunction solar cells, the blend poly (3‐hexylthiophene):[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (P3HT:PCBM) serves as an important model system. The success of the P3HT:PCBM blend comes from efficient charge generation and transport with low recombination. There is not, however, a good microscopic picture of what causes these, hindering the development of new material systems. In this report UV photoelectron spectroscopy measurements on both regiorandom‐ (rra) and regioregular‐ (rr) P3HT are presented, and the results are interpreted using the Integer Charge Transfer model. The results suggest that spontaneous charge transfer from P3HT to PCBM occurs after heat treatment of P3HT:PCBM blends. The resulting formation of an interfacial dipole creates an extra barrier at the interface explaining the reduced (non‐)geminate recombination with increased charge generation in heat treated rr‐P3HT:PCBM blends. Extensive photoinduced absorption measurements using both above‐ and below‐bandgap excitation light are presented, in good agreement with the suggested dipole formation.     

Extracting Microscopic Device Parameters from Transient Photocurrent Measurements of P3HT:PCBM Solar Cells

By including trap‐limited recombination in a time‐domain drift‐diffusion model of a P3HT:PCBM solar cell, experimental transient photocurrent (TPC) measurements across the current–voltage (J–V) curve in both the light and the dark can be reproduced. Using the same set of model parameters, the steady‐state current–voltage curves and charge‐extraction data are also reproduced. The model is validated by predicting the recombination rate at open circuit and comparing results with the rate as measured by the transient photovoltage (TPV) measurement technique. It is demonstrated that the model, which incorporates transport, carrier trapping, carrier de‐trapping, and recombination, is able to reproduce device dynamics correctly. The fit of the model to the experimental results is improved by varying the shape of the electron and hole density of state (DoS) functions. By discretizing the DoS in energy space and allowing its shape to vary, the TPC transients can be closely fitted and the form of the tails of the electron and hole DoS extracted. It is found that the DoS of trapped carriers can be represented by a series of Gaussians offset in energy. This is tentatively attributed to electronic disorder introduced by molecular packing of the molecules.     

Effect of Polymer Crystallinity in P3HT:PCBM Solar Cells on Band Gap Trap States and Apparent Recombination Order

The non‐geminate recombination of charge carriers in polymer‐fullerene solar cells has been modeled in the last few years with a trap‐assisted recombination model, which states that the apparent recombination order depends on the concentration of trapped charges tailing into the band gap. Higher concentrations of trapped charges lead to higher apparent recombination orders. In this work, the mass fraction f of highly crystalline nanofibrillar P3HT to the total P3HT content in P3HT:PCBM solar cells is consistently varied, controlling the temperature of a nanofibers‐P3HT casting dispersion. A systematic study of the apparent recombination order, measured with a transient photovoltage technique, as a function of f is presented. A correlation is shown between the apparent recombination order, the P3HT crystallinity, and the trap concentration in the band gap measured with an admittance spectroscopy technique.     

Impact of Fullerene Molecular Weight on P3HT:PCBM Microstructure Studied Using Organic Thin‐Film Transistors

The clustering and diffusion of C₇₁‐butyric acid methyl ester (PC₇₁BM) in poly(3‐hexylthiophene) (P3HT) has been studied using single layer blend and bilayer organic field‐effect transistors (OFETs) and by atomic force microscopy (AFM). P3HT:PC₇₁BM blend based OFETs were found to undergo phase‐segregation upon annealing, which was detectable as a fall in electron mobility with increasing annealing temperature. By employing carefully designed bilayer P3HT:PC₇₁BM OFETs, the diffusion‐properties of PC₇₁BM in P3HT could additionally be inferred from electron mobility measurements. It was found that the prerequisite annealing temperatures for detectable PC₇₁BM clustering and diffusion in P3HT was approximately 20 °C higher than for PC₆₁BM. The diffusion coefficient of PC₆₁BM in P3HT was found to be several times higher that that of PC₇₁BM. The present work provides unique insights into the diffusion process of fullerenes in conjugated polymers and could prove highly valuable for future materials development and device optimization.     

Improved Power Conversion Efficiency of P3HT:PCBM Organic Solar Cells by Strong Spin–Orbit Coupling‐Induced Delayed Fluorescence

Solution‐processed organic bulk heterojunction solar cells based on poly(3‐hexylthiophene) (P3HT) blended with [6,6]‐phenyl‐C₆₀‐butyric acid methyl ester are doped with different concentrations of iron (II,III) oxide nanoparticles (Fe₃O₄). The power conversion efficiency of the devices doped at low concentrations is improved up to 11%. The improvement finds its origin in a lower recombination current, which is a consequence of an increased effective exciton lifetime according to the J–V characteristics and the optoelectronical analysis of the films. The increase in performance cannot be attributed to changes in morphology or crystallinity according to grazing‐incidence X‐ray scattering experiments. The evolution of the solar cell short‐circuit current at low doping concentrations is related to variations in the arrangement of the crystalline regions of P3HT. For high doping concentrations (above 1.0 wt%) the performance of the solar cell decays rapidly, ascribed to the increased leakage currents in the device caused by the presence of nanoparticles.     

Electron Collection as a Limit to Polymer:PCBM Solar Cell Efficiency: Effect of Blend Microstructure on Carrier Mobility and Device Performance in PTB7:PCBM

The poor photovoltaic performance of state‐of‐the‐art blends of poly[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl] (PTB7) and [6,6]‐phenyl‐C61‐butyric acid (PCBM) at large active layer thicknesses is studied using space‐charge‐limited current mobility and photovoltaic device measurements. The poor performance is found to result from relatively low electron mobility. This is attributed to the low tendency of PTB7 to aggregate, which reduces the ability of the fullerene to form a connected network. Increasing the PCBM content 60–80 wt% increases electron mobility and accordingly improves performance for thicker devices, resulting in a fill factor (FF) close to 0.6 at 300 nm. The result confirms that by improving only the connectivity of the fullerene phase, efficient electron and hole collection is possible for 300 nm‐thick PTB7:PCBM devices. Furthermore, it is shown that solvent additive 1,8‐diiodooctane (DIO), used in the highest efficiency PTB7:PCBM devices, does not improve the thickness dependence and, accordingly, does not lead to an increase in either hole or electron mobility or in the carrier lifetime. A key challenge for researchers is therefore to develop new methods to ensure connectivity in the fullerene phase in blends without relying on either a large excess of fullerene or strong aggregation of the polymer.     

A Conclusive View on Charge Generation,Recombination, and Extraction in As‐Prepared and Annealed P3HT:PCBM Blends: Combined Experimental and Simulation Work

Time‐delayed collection field (TDCF) and bias‐amplified charge extraction (BACE) are applied to as‐prepared and annealed poly(3‐hexylthiophene):[6,6]‐phenyl C₇₁ butyric acid methyl ester (P3HT:PCBM) blends coated from chloroform. Despite large differences in fill factor, short‐circuit current, and power conversion efficiency, both blends exhibit a negligible dependence of photogeneration on the electric field and strictly bimolecular recombination (BMR) with a weak dependence of the BMR coefficient on charge density. Drift‐diffusion simulations are performed using the measured coefficients and mobilities, taking into account bimolecular recombination and the possible effects of surface recombination. The excellent agreement between the simulation and the experimental data for an intensity range covering two orders of magnitude indicates that a field‐independent generation rate and a density‐independent recombination coefficient describe the current–voltage characteristics of the annealed P3HT:PCBM devices, while the performance of the as‐prepared blend is shown to be limited by space charge effects due to a low hole mobility. Finally, even though the bimolecular recombination coefficient is small, surface recombination is found to be a negligible loss mechanism in these solar cells.     

Tail State‐Assisted Charge Injection and Recombination at the Electron‐Collecting Interface of P3HT:PCBM Bulk‐Heterojunction Polymer Solar Cells

The systematic insertion of thin films of P3HT and PCBM at the electron‐ and hole‐collecting interfaces, respectively, in bulk‐heterojunction polymer solar cells results in different extents of reduction in device characteristics, with the insertion of P3HT at the electron‐collecting interface being less disruptive to the output currents compared to the insertion of PCBM at the hole‐collecting interface. This asymmetry is attributed to differences in the tail state‐assisted charge injection and recombination at the active layer‐electrode interfaces. P3HT exhibits a higher density of tail states compared to PCBM; holes in these tail states can thus easily recombine with electrons at the electron‐collection interface during device operation. This process is subsequently compensated by the injection of holes from the cathode into these tail states, which collectively enables net current flow through the polymer solar cell. The study presented herein thus provides a plausible explanation for why preferential segregation of P3HT to the cathode interface is inconsequential to device characteristics in P3HT:PCBM bulk‐heterojunction solar cells.     

Gene Targeting Study Reveals Unexpected Expression of Brain-expressed X-linked 2 in Endocrine and Tissue Stem/Progenitor Cells in Mice

Identification of genes specifically expressed in stem/progenitor cells is an important issue in developmental and stem cell biology. Genome-wide gene expression analyses in liver cells performed in this study have revealed a strong expression of X-linked genes that include members of the brain-expressed X-linked (Bex) gene family in stem/progenitor cells. Bex family genes are expressed abundantly in the neural cells and have been suggested to play important roles in the development of nervous tissues. However, the physiological role of its individual members and the precise expression pattern outside the nervous system remain largely unknown. Here, we focused on Bex2 and examined its role and expression pattern by generating knock-in mice; the enhanced green fluorescence protein (EGFP) was inserted into the Bex2 locus. Bex2-deficient mice were viable and fertile under laboratory growth conditions showing no obvious phenotypic abnormalities. Through an immunohistochemical analysis and flow cytometry-based approach, we observed unique EGFP reporter expression patterns in endocrine and stem/progenitor cells of the liver, pyloric stomach, and hematopoietic system. Although Bex2 seems to play redundant roles in vivo, these results suggest the significance and potential applications of Bex2 in studies of endocrine and stem/progenitor cells.     

柠檬酸、葡萄糖和有机质对植物磷素吸收和土壤磷素形态的影响（英）

研究了柠檬酸、葡萄糖和有机质(栎树类凋落物和三叶草茎叶)对几种栽培和野生植物磷素吸收以及高度风化老成土中磷素形态的影响。在未加入无机磷的情况下,连续加入柠檬酸溶液增加了温室盆栽大豆(Glycine max(L.)Merr.)和高梁(Sorghum bicolor)对磷素 的吸收。这表明,柠檬酸可以溶解土壤中被铁、铝氧化物固定的磷。当无机磷和柠檬酸溶液同时加入后,由于有机配位体能够阻止土壤对磷素的吸附和固定,植物对磷的吸收总量明显高于仅仅加入无机磷的对照。不论是否加入无机磷,葡萄糖均没有增加植物对磷素的吸收,但却改变了土壤中磷素的形态。该试验的结果还表明,Hedley等人提出的土壤磷素分级方法不适于有机质含量很低的酸性土壤。在另一种性质极为相似的酸性土壤中施入粉碎的栎树(Quercus spp.)凋落物和三叶草(Trifolium pratense)后,野生商陆(Phytolacca americana)吸收磷素的能力增强。通过进一步对土壤中的磷素进行化学分级,结果表明,这些有机物质可以改变土壤中磷素存在的形态。本文还就有机质分解过程中的中间产物对土壤磷素有效性的影响机理进行了探讨     

Charge Carrier Dynamics in a Ternary Bulk Heterojunction System Consisting of P3HT,Fullerene, and a Low Bandgap Polymer

The photoresponse of P3HT:PC₆₁BM based organic solar cells can be enhanced by blending the bulk heterojunction with the low band gap polymer Si‐ PCPDTBT. Organic solar cells containing the resulting ternary blend as the photoactive layer deliver short circuit currents of up to 15.5 mA cm^?2. Morphological studies show modest phase separation without the perturbation of the crystallinity of the P3HT:PC₆₁BM matrix, in accordance with the measured acceptable fill factors. Picosecond time‐resolved pump‐probe spectroscopy reveals that the sensitization of P3HT:PC₆₁BM with Si‐PCPDTBT involves the transfer of photogenerated positive polarons from the low band gap polymer to P3HT within few hundreds of picoseconds. Intensity dependent experiments in combination with global fitting show that the charge transfer from Si‐PCPDTBT to P3HT competes with non‐geminate charge carrier recombination of the holes in the Si‐PCPDTBT phase with electrons in the PC₆₁BM phase, both processes being of diffusive nature. At excitation densities corresponding to steady state conditions under one sun, modelling predicts hole transfer efficiencies exceeding 90%, in accordance with IQE measurements. At higher pump intensities, bimolecular recombination suppresses the hole transfer process effectively.     

Glycomics Profiling of Chinese Hamster Ovary Cell Glycosylation Mutants Reveals N-Glycans of a Novel Size and Complexity

Identifying biological roles for mammalian glycans and the pathways by which they are synthesized has been greatly facilitated by investigations of glycosylation mutants of cultured cell lines and model organisms. Chinese hamster ovary (CHO) glycosylation mutants isolated on the basis of their lectin resistance have been particularly useful for glycosylation engineering of recombinant glycoproteins. To further enhance the application of these mutants, and to obtain insights into the effects of altering one specific glycosyltransferase or glycosylation activity on the overall expression of cellular glycans, an analysis of the N-glycans and major O-glycans of a panel of CHO mutants was performed using glycomic analyses anchored by matrix-assisted laser desorption ionization-time of flight/time of flight mass spectrometry. We report here the complement of the major N-glycans and O-glycans present in nine distinct CHO glycosylation mutants. Parent CHO cells grown in monolayer versus suspension culture had similar profiles of N- and O-GalNAc glycans, although the profiles of glycosylation mutants Lec1, Lec2, Lec3.2.8.1, Lec4, LEC10, LEC11, LEC12, Lec13, and LEC30 were consistent with available genetic and biochemical data. However, the complexity of the range of N-glycans observed was unexpected. Several of the complex N-glycan profiles contained structures of m/z ∼13,000 representing complex N-glycans with a total of 26 N-acetyllactosamine (Galβ1–4GlcNAc)_n units. Importantly, the LEC11, LEC12, and LEC30 CHO mutants exhibited unique complements of fucosylated complex N-glycans terminating in Lewis^x and sialyl-Lewis^x determinants. This analysis reveals the larger-than-expected complexity of N-glycans in CHO cell mutants that may be used in a broad variety of functional glycomics studies and for making recombinant glycoproteins.     

Optical properties of P3HT and N2200 polymers: a performance study of an optimally tuned DFT functional

The optical properties of systems composed of the polymers PolyeraActivInk? N2200 and P3HT are experimentally and theoretically investigated using UV-Vis spectroscopy and time-dependent density functional theory calculations, respectively. From a theoretical point of view, we carried out an analysis considering several functionals and model oligomers of different sizes to mimic the polymers. As our studies were performed with and without solvents, a first important result regards the fact that, by considering solvent effects, a better agreement between theoretical and experimental results could be achieved. Our findings also show that an optimally tuned functional is better suited to describe the experimental absorption profile than a hybrid one for the flexible polymer (P3HT). For the almost rigid polymer considered here (N2200), on the other hand, hybrid functionals may perform better than tuned functionals.     

5HT2 and 5HT3 receptors' contribution to modeling of post-serotonin respiratory pattern in cats

Cardio-respiratory reflex effects of an exogenous serotonin challenge are suggested to be modulated by activation of the peripheral 5HT2 and 5HT3 receptors. In the present experiments the blocking effects of serotoninergic active drugs: ketanserin and tropanserin (MDL 72222) were studied in six pentobarbitone-chloralose anaesthetized cats. Bolus injection of serotonin (0.05 mg.kg(-1)) into the right femoral vein evoked prompt apnea, hypotension followed by tachypnoeic breathing. Pre-treatment with ketanserin (0.1 mg.kg(-1)), 5HT2 receptor antagonist, shortened the duration of post-serotonin apnea (P < 0.05), but had no effect on the pattern of post-apnoeic breathing. 5HT3 receptor blockade with the selective antagonist MDL 72222 (0.2 mg.kg(-1)) totally eliminated respiratory response to serotonin. In breaths that followed post-serotonin apnea, peak amplitude of the integrated phrenic signal was reduced (P < 0.001), unbiased by ketanserin blockade, and remained at the baseline level in MDL treated rats. Serotonin-induced hypotension was unaffected by the blockade of 5HT2 receptors. Inactivation of 5HT3 receptors with MDL attenuated the fall in blood pressure (P < 0.05). This data suggests that the squeal of serotonin-induced pulmonary chemoreflex, i.e. respiratory arrest, post-apnoeic pattern of breathing, bradycardia, and partially hypotension are mediated by 5HT3 receptors.