Interplay of Optical,Morphological, and Electronic Effects of ZnO Optical Spacers in Highly Efficient Polymer Solar Cells

Optical spacers based on metal oxide layers have been intensively studied in poly(3‐hexylthiophene) (P3HT) based polymer solar cells for optimizing light distribution inside the device, but to date, the potential of such a metal oxide spacer to improve the electronic performance of the polymer solar cells simultaneously has not yet be investigated. Here, a detailed study of performance improvement in high efficient polymer solar cells by insertion of solution‐processed ZnO optical spacer using ethanolamine surface modification is reported. Insertion of the modified ZnO optical spacer strongly improves the performance of polymer solar cells even in the absence of an increase in light absorption. The electric improvements of the device are related to improved electron extraction, reduced contact barrier, and reduced recombination at the cathode. Importantly, it is shown for the first time that the morphology of optical spacer layer is a crucial parameter to obtain highly efficient solar cells in normal device structures. By optimizing optical spacer effects, contact resistance, and morphology of ZnO optical spacers, poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6diyl] [3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl] thieno[3,4‐b]thiophenediyl]] (PTB7):[6,6]‐phenyl‐C71‐butyric acid (PC₇₀BM) bulk heterojunction solar cells with conversion efficiency of 7.6% are obtained in normal device structures with all‐solution‐processed interlayers.     

Nanofiber‐Based Bulk‐Heterojunction Organic Solar Cells Using Coaxial Electrospinning

Nanofibers consisting of the bulk heterojunction organic photovoltaic (BHJ–OPV) electron donor–electron acceptor pair poly(3‐hexylthiophene):phenyl‐C₆₁‐butyric acid methyl ester (P3HT:PCBM) are produced through a coaxial electrospinning process. While P3HT:PCBM blends are not directly electrospinnable, P3HT:PCBM‐containing fibers are produced in a coaxial fashion by utilizing polycaprolactone (PCL) as an electrospinnable sheath material. Pure P3HT:PCBM fibers are easily obtained after electrospinning by selectively removing the PCL sheath with cyclopentanone (average diameter 120 ± 30 nm). These fibers are then incorporated into the active layer of a BHJ–OPV device, which results in improved short‐circuit current densities, fill factors, and power‐conversion efficiencies (PCE) as compared to thin‐film devices of identical chemical composition. The best‐performing fiber‐based devices exhibit a PCE of 4.0%, while the best thin‐film devices have a PCE of 3.2%. This increase in device performance is attributed to the increased in‐plane alignment of P3HT polymer chains on the nanoscale, caused by the electrospun fibers, which leads to increased optical absorption and subsequent exciton generation. This methodology for improving device performance of BHJ–OPVs could also be implemented for other electron donor–electron acceptor systems, as nanofiber formation is largely independent of the PV material.     

Plasmonic Backscattering Effect in High‐Efficient Organic Photovoltaic Devices

A universal strategy for efficient light trapping through the incorporation of gold nanorods on the electron transport layer (rear) of organic photovoltaic devices is demonstrated. Utilizing the photons that are transmitted through the active layer of a bulk heterojunction photovoltaic device and would otherwise be lost, a significant enhancement in power conversion efficiency (PCE) of poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)]:phenyl‐C₇₁‐butyric acid methyl ester (PCDTBT:PC₇₁BM) and poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b] thiophenediyl]] (PTB7):PC₇₁BM by ≈13% and ≈8%, respectively. PCEs over 8% are reported for devices based on the PTB7:PC₇₁BM blend. A comprehensive optical and electrical characterization of our devices to clarify the influence of gold nanorods on exciton generation, dissociation, charge recombination, and transport inside the thin film devices is performed. By correlating the experimental data with detailed numerical simulations, the near‐field and far‐field scattering effects are separated of gold nanorods (Au NRs), and confidently attribute part of the performance enhancement to the enhanced absorption caused by backscattering. While, a secondary contribution from the Au NRs that partially protrude inside the active layer and exhibit strong near‐fields due to localized surface plasmon resonance effects is also observed but is minor in magnitude. Furthermore, another important contribution to the enhanced performance is electrical in nature and comes from the increased charge collection probability.     

Low‐Temperature‐Processed 9% Colloidal Quantum Dot Photovoltaic Devices through Interfacial Management of p–n Heterojunction

Low‐temperature solution‐processed high‐efficiency colloidal quantum dot (CQD) photovoltaic devices are developed by improving the interfacial properties of p–n heterojunctions. A unique conjugated polyelectrolyte, WPF‐6‐oxy‐F, is used as an interface modification layer for ZnO/PbS‐CQD heterojunctions. With the insertion of this interlayer, the device performance is dramatically improved. The origins of this improvement are determined and it is found that the multifunctionality of the WPF‐6‐oxy‐F interlayer offers the following essential benefits for the improved CQD/ZnO junctions: (i) the dipole induced by the ionic substituents enhances the quasi‐Fermi level separation at the heterojunction through favorable energy band‐bending, (ii) the ethylene oxide groups containing side chains can effectively passivate the interfacial defect sites of the heterojunction, and (iii) these effects occur without deterioration in the intrinsic depletion region or the series resistance of the device. All of the figures‐of‐merit of the devices are improved as a result of the enhanced built‐in potential (electric field) and the reduced interfacial charge recombination at the heterojunction. The benefits due to the WPF‐6‐oxy‐F interlayer are generally applicable to various types of PbS/ZnO heterojunctions. Finally, CQD photovoltaic devices with a power conversion efficiency of 9% are achievable, even by a solution process at room temperature in an air atmosphere. The work suggests a useful strategy to improve the interfacial properties of p–n heterojunctions by using polymeric interlayers.     

Interfacial Engineering of P3HT/ZnO Hybrid Solar Cells Using Phthalocyanines: A Joint Theoretical and Experimental Investigation

Atomistic simulations and experimental investigations are combined to study heterojunction interfaces of hybrid polymer solar cells, with the aim to better understand and precisely predict their photovoltaic properties. The focus is on a hybrid ternary model system based on a poly(3‐hexylthiophene) (P3HT)/zinc phthalocyanine (ZnPc)/ZnO interface, in which a ZnPc interlayer is applied to improve the performance of the hybrid interface. Theoretical predictions of the ternary system are validated against the properties of a concrete P3HT/ZnPc/ZnO planar heterojunction device. The theoretical predictions closely agree with the photovoltaic properties obtained in P3HT/ZnPc/ZnO solar cells, indicating the strength of the method for modeling hybrid heterojunction interfaces. The theoretical and experimental results reveal that: i) ZnPc molecules in direct contact with a ZnO surface insert new energy levels due to a strong ZnPc/ZnO coupling, ii) electron injection from these new energy levels of ZnPc into ZnO is highly efficient, iii) the ZnPc/ZnO coupling strongly influences the energy levels of the ZnO and P3HT leading to a reduction of the open circuit voltage, and iv) charge carrier recombination at the P3HT/ZnO interface is reduced by the ZnPc interlayer. The intercalation of ZnPc leads to an increase in photocurrent as well as to an overall increase in power conversion.     

Highly Efficient Aqueous‐Processed Hybrid Solar Cells: Control Depletion Region and Improve Carrier Extraction

Environmental friendly aqueous‐processed solar cells have become one of the most promising candidates for the next‐generation photovoltaic devices. Researchers have made lots of progress in designing active materials with novel structures, manipulating the defects in active materials, optimizing device architecture, etc. However, it has long been a challenge to control the width of the depletion region and enhance carrier extraction ability. Fabrication of a thick bulk heterojunction (BHJ) film is an effective strategy to address these issues but difficult to realize. Herein, the thicker BHJ film of ZnO:CdTe is successfully fabricated and incorporated into CdTe‐poly(p‐phenylenevinylene) hybrid solar cells. As expected, this BHJ film enhances light absorption, extends the width of the depletion region, prolongs carrier lifetime, and promotes carrier extraction ability. Moreover, the electron transport layer of sol–gel ZnO with excellent transmittance and electrical conductivity boosts electron generation, transport, and injection, which further improves the device performance. As a result, the highest short current density (J_sc) of 19.5 mA cm^?2, power conversion efficiency of 6.51%, and the widest depletion region (177 nm) are obtained in aqueous‐processed hybrid solar cells.     

Enhanced Device Efficiency of Bilayered Inverted Organic Solar Cells Based on Photocurable P3HTs with a Light‐Harvesting ZnO Nanorod Array

Periodically patterned zinc oxide nanorod (P‐ZnO NR) layers are directly prepared from a pre‐patterned ZnO seed layer using a polydimethylsiloxane (PDMS) elastomeric stamp and then applied in inverted organic photovoltaic devices (IOPVs). The IOPV is assembled with a hydrothermally grown zinc oxide nanorod patterns with a (100) preferential crystal orientation as an electron transport buffer layer (ETBL) and photoactive bilayer consisting of methacylate end‐functionalized poly(3‐hexylthiophene) (P3HT‐MA), phenyl‐C₆₀‐butyric acid methyl ester (PC₆₀BM) and indene‐C₆₀ bis‐adduct (IC₆₀BA). In te IOPVs, the P‐ZnO NR is found to induce efficient light harvesting and the photocrosslinkable P3HTs afford solution‐processed bilayer architecture in IOPVs to show improved device stability and performance (PCE_max= 5.95%), as the bilayered structure allowed direct exciton splitting, thus reducing the charge recombination.     

Solvent‐Mediated Dimension Tuning of Semiconducting Oxide Nanostructures as Efficient Charge Extraction Thin Films for Perovskite Solar Cells with Efficiency Exceeding 16%

The recent surge in efficiency and progress of organohalide perovskite solar cells (PSCs) has been significant. The PSC performance is significantly influenced by nanostructuring as this varies the intrinsic optical, electrical, and electrochemical properties. Diverse TiO₂ electron transport layers (ETLs) are solvothermally grown on the transparent conducting oxide substrate with different dimensionalities, 0D nanoparticles (TNP), 1D nanowires (TNW) to 2D nanosheets (TNS), by varying the organic solvent used. These layers feature enhanced optical transparency (≈2%–5% transmittance improvement compared to pristine fluorine doped tin oxide, FTO, glass) minimizing light absorption losses. PSCs constructed using 1D TNW or 2D TNS yield enhanced photovoltaic performance compared to the 0D TNP counterparts. This is a result of i) improved infiltration of the perovskite in the porous TNW or TNS network and ii) facilitated electron transport and charge extraction at the TNW/perovskite or TNS/perovskite interfaces, thus reduced interfacial recombination loss. Employing a bilayered ETL film consisting of a self‐assembled TiO₂ blocking layer and a subsequent TNW active layer, produces PSC devices with an efficiency exceeding 16%. This bilayered ETL film can simultaneously block the photogenerated holes and enhance electron ­extraction, therefore improving PSC performance.     

8.9% Single‐Stack Inverted Polymer Solar Cells with Electron‐Rich Polymer Nanolayer‐Modified Inorganic Electron‐Collecting Buffer Layers

Enhanced power conversion efficiency (PCE) is reported in inverted polymer solar cells when an electron‐rich polymer nanolayer (poly(ethyleneimine) (PEI)) is placed on the surface of an electron‐collecting buffer layer (ZnO). The active layer is made with bulk heterojunction films of poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]] (PTB7) and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM). The thickness of the PEI nanolayer is controlled to be 2 nm to minimize its insulating effect, which is confirmed by X‐ray photoelectron spectroscopy and optical absorption measurements. The Kelvin probe and ultraviolet photoelectron spectroscopy measurements demonstrate that the enhanced PCE by introducing the PEI nanolayer is attributed to the lowered conduction band energy of the ZnO layer via the formation of an interfacial dipole layer at the interfaces between the ZnO layer and the PEI nanolayer. The PEI nanolayer also improves the surface roughness of the ZnO layer so that the device series resistance can be noticeably decreased. As a result, all solar cell parameters including short circuit current density, open circuit voltage, fill factor, and shunt resistance are improved, leading to the PCE increase up to ≈8.9%, which is close to the best PCE reported using conjugated polymer electrolyte films.     

Simultaneous Improved Performance and Thermal Stability of Planar Metal Ion Incorporated CsPbI2Br All‐Inorganic Perovskite Solar Cells Based on MgZnO Nanocrystalline Electron Transporting Layer

The high thermal stability and facile synthesis of CsPbI₂Br all‐inorganic perovskite solar cells (AI‐PSCs) have attracted tremendous attention. As far as electron‐transporting layers (ETLs) are concerned, low temperature processing and reduced interfacial recombination centers through tunable energy levels determine the feasibility of the perovskite devices. Although the TiO₂ is the most popular ETL used in PSCs, its processing temperature and moderate electron mobility hamper the performance and feasibility. Herein, the highly stable, low‐temperature processed MgZnO nanocrystal‐based ETLs for dynamic hot‐air processed Mn²⁺ incorporated CsPbI2Br AI‐PSCs are reported. By holding its regular planar “n–i–p” type device architecture, the MgZnO ETL and poly(3‐hexylthiophene‐2,5‐diyl) hole transporting layer, 15.52% power conversion efficiency (PCE) is demonstrated. The thermal‐stability analysis reveals that the conventional ZnO ETL‐based AI‐PSCs show a serious instability and poor efficiency than the Mg²⁺ modified MgZnO ETLs. The photovoltaic and stability analysis of this improved photovoltaic performance is attributed to the suitable wide‐bandgap, low ETL/perovskite interface recombination, and interface stability by Mg²⁺ doping. Interestingly, the thermal stability analysis of the unencapsulated AI‐PSCs maintains >95% of initial PCE more than 400 h at 85 °C for MgZnO ETL, revealing the suitability against thermal degradation than conventional ZnO ETL.     

Crosslinkable Amino‐Functionalized Conjugated Polymer as Cathode Interlayer for Efficient Inverted Polymer Solar Cells

A novel crosslinkable aminoalkyl‐functionalized polymer, poly[9,9‐bis(6‐(N,N‐diethylamino)propyl)fluorene‐alt‐9,9‐bis(hex‐5‐en‐1‐yl)‐fluorene] (PFN‐V), is designed and synthesized. The resulting polymer can be rapidly crosslinked by UV‐curing within 5 s in a nearly quantitative yield based on the “click” chemistry of alkyene end‐groups of the PFN‐V side chains and the addition of 1,8‐octanedithiol. The crosslinked PFN‐V film exhibits excellent solvent resistance property and can act as effective cathode interlayer to modify the indium tin oxide (ITO) electrode, which can thus facilitate the formation of Ohmic contact between cathode and active layer. The surface energy of PFN‐V is quite comparable to that of PC₇₁BM, which is favorable for the formation of vertical phase separation in the bulk heterojunction film that can facilitate extraction of charges as verified by transient photocurrent measurements. Based on the resulting PFN‐V as the cathode interlayer, the fabricated polymer solar cells with inverted device structure show a remarkable enhancement of power conversion efficiency from 3.11% for the control device to 9.18% for PFN‐V based device. These observations indicate that the synthesized PFN‐V can be a promising crosslinked copolymer as the cathode interlayer for high performance polymer solar cells.     

In Situ Characterization of Lifetime and Morphology in Operating Bulk Heterojunction Organic Photovoltaic Devices by Impedance Spectroscopy

Time‐dependent charge transport in operating poly(3‐hexylthiophene):[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (P3HT:PCBM) bulk heterojunction organic photovoltaic (OPV) devices has been characterized with impedance spectroscopy. Devices with varied composition and morphology were measured over a range of illumination intensities ranging from dark conditions to 1 sun and applied bias voltages ranging from 0.0 V to 0.75 V. Using an equivalent circuit model, materials properties such as dielectric constant and conductivity were determined and found to be in agreement with values measured by other methods. Average carrier lifetimes were also extracted from the model and found to correlate with measured power conversion efficiencies. At the short circuit condition and ～1 sun illumination, the average electron lifetime was found to vary from 7.8 to 22 μs for devices with power conversion efficiencies ranging from 2.0 to 2.5%. These results suggest that impedance spectroscopy is an effective tool for predicting how processing parameters can impact device performance in organic bulk heterojunction photovoltaic devices.     

Manipulating Backbone Structure to Enhance Low Band Gap Polymer Photovoltaic Performance

A pair of polymers, PBDTBT and PBDTDTBT , was synthesized for application in polymer solar cells (PSCs). Although these two polymers have similar absorption bands and molecular energy levels, PBDTDTBT exhibits much better photovoltaic performance in polymer solar cell (PSC) devices with power conversion efficiency (PCE) of 7.4%. To understand the differences between PBDTDTBT and PBDTBT , we have investigated the correlations of the molecular structure, morphology, dynamics and efficiency of these two polymers. A theoretical investigation using density functional theory (DFT) and time‐dependent DFT (TDDFT) has been employed to investigate the electron density and electron delocalization extent of the unimers. TEM data showed that PBDTDTBT phase separates from PC₇₁BM, while PBDTBT suffers from having a proper morphology on different processing conditions. Grazing incidence wide angle X‐ray diffraction (GIWAXD) was used to probe the crystal structure of the polymers in thin film. A polymorph crystal structure was observed for PBDTBT . Grazing incidence small angle X‐ray scattering (GISAXS) was used to probe the size scale of phase separation, with an optimized 25 nm feature size observed for PBDTDTBT /PC₇₁BM blends, which agrees well with TEM results. Femtosecond transient absorption (TA) spectroscopy was used to probe the dynamics of the fundamental processes in organic photovoltaic (OPV) materials, such as charge separation and recombination. The enhanced absorption coefficient, good charge separation, optimal phase separation and higher charge mobility all contribute to the high PCE of the PBDTDTBT /PC₇₁BM devices.     

Interface Design to Improve the Performance and Stability of Solution‐Processed Small‐Molecule Conventional Solar Cells

A systematic study on the effect of various cathode buffer layers on the performance and stability of solution‐processed small‐molecule organic solar cells (SMOSCs) based on tris{4‐[5‐(1,1‐dicyanobut‐1‐en‐2‐yl)‐2,2‐bithiophen‐5‐yl]phenyl}amine (N(Ph‐2T‐DCN‐Et)₃):6,6‐phenyl‐C71‐butyric acid methyl ester (N(Ph‐2T‐DCN‐Et)₃:PC₇₀BM) is presented. The power conversion efficiency (PCE) in these systems can be significantly improved from approximately 4% to 5.16% by inserting a metal oxide (ZnO) layer between the active layer and the Al cathode instead of an air‐sensitive Ba or Ca layer. However, the low work‐function Al cathode is susceptible to chemical oxidation in the atmosphere. Here, an amine group functionalized fullerene complex (DMAPA‐C₆₀) is inserted as a cathode buffer layer to successfully modify the interface towards ZnO/Ag and active layer/Ag functionality. For devices with ZnO/DMAPA‐C₆₀/Ag and DMAPA‐C₆₀/Ag cathodes the PCEs are improved from 2.75% to 4.31% and to 5.40%, respectively, compared to a ZnO/Ag device. Recombination mechanisms and stability aspects of devices with various cathodes are also investigated. The significant improvement in device performance and stability and the simplicity of fabrication by solution processing suggest this DMAPA‐C₆₀‐based interface as a promising and practical pathway for developing efficient, stable, and roll‐to‐roll processable SMOSCs.     

Controllable ZnMgO Electron‐Transporting Layers for Long‐Term Stable Organic Solar Cells with 8.06% Efficiency after One‐Year Storage

Currently, one main challenge in organic solar cells (OSCs) is to achieve both good stability and high power conversion efficiencies (PCEs). Here, highly efficient and long‐term stable inverted OSCs are fabricated by combining controllable ZnMgO (ZMO) cathode interfacial materials with a polymer:fullerene bulk‐heterojunction. The resulting devices based on the nanocolloid/nanoridge ZMO electron‐transporting layers (ETLs) show greatly enhanced performance compared to that of the conventional devices or control devices without ZMO or with ZnO ETLs. The ZMO‐based OSCs maintain 84%–93% of their original PCEs over 1‐year storage under ambient conditions. An initial PCE of 9.39% is achieved for the best device, and it still retains a high PCE of 8.06% after 1‐year storage, which represents a record high value for long‐term stable OSCs. The excellent performance is attributed to the enhanced electron transportation/collection, reduced interfacial energy losses, and improved stability of the nanocolloid ZMO ETL. These findings provide a promising way to develop OSCs with high efficiencies and long device lifetime towards practical applications.     

High‐Energy,High‐Rate,Lithium–Sulfur Batteries: Synergetic Effect of Hollow TiO2‐Webbed Carbon Nanotubes and a Dual Functional Carbon‐Paper Interlayer

A novel nanocomposite cathode consisting of sulfur and hollow‐mesoporous titania (HMT) embedded within carbon nanotubes (CNT), which is designated as S‐HMT@CNT, has been obtained by encapsulating elemental sulfur into the pores of hollow‐mesoporous, spherical TiO₂ particles that are connected via CNT. A carbon‐paper interlayer, referred to as dual functional porous carbon wall (DF‐PCW), has been obtained by filling the voids in TiO₂ spheres with carbon and then etching the TiO₂ template with a chemical process. The DF‐PCW interlayer provides a medium for scavenging the lithium polysulfides and suppressing them from diffusing to the anode side when it is inserted between the sulfur cathode and the separator. Lithium–sulfur cells fabricated with the thus prepared S‐HMT@CNT cathode and the DF‐PCW interlayer exhibit superior performance due to the containment of sulfur in TiO₂ and improved lithium–ion and electron transports. The Li–S cells display high capacity with excellent capacity retention at rates as high as 1C, 2C, and 5C rates.     

Overcoming the “Light‐Soaking” Issue in Inverted Organic Solar Cells by the Use of Al:ZnO Electron Extraction Layers

A common phenomenon of organic solar cells (OSCs) incorporating metal‐oxide electron extraction layers is the requirement to expose the devices to UV light in order to improve device characteristics – known as the so‐called “light‐soaking” issue. This behaviour appears to be of general validity for various metal‐oxide layers, various organic donor/acceptor systems, and regardless if single junction devices or multi stacked cells are considered. The requirement of UV exposure of OSCs may impose severe problems if substrates with limited UV transmission, UV blocking filters or UV to VIS down‐conversion concepts are applied. In this paper, we will demonstrate that this issue can be overcome by the use of Al doped ZnO (AZO) as electron extraction interlayer. In contrast to devices based on TiO_x and ZnO, the AZO devices show well‐behaved solar cell characteristics with a high fill factor (FF) and power conversion efficiency (PCE) even without the UV spectral components of the AM1.5 solar spectrum. As opposed to previous claims, our results indicate that the origin of s‐shaped characteristics of the OSCs is the metal‐oxide/organic interface. The electronic structures of the TiO_x/fullerene and AZO/fullerene interfaces are studied by photoelectron spectroscopy, revealing an electron extraction barrier for the TiO_x/fullerene case and facilitated electron extraction for AZO/fullerene. These results are of general relevance for organic solar cells based on various donor acceptor active systems.     

Universal Design Principles for Cascade Heterojunction Solar Cells with High Fill Factors and Internal Quantum Efficiencies Approaching 100%

Cascade heterojunction (CHJ) organic solar cells have recently emerged as an alternative to conventional bulk heterojunctions and series‐connected tandems due to their significant promise for high internal quantum efficiency (IQE) and broad spectral coverage. However, CHJ devices thus far have also exhibited poor fill factor (FF), resulting in minimal enhancements (or even decreases) in power conversion efficiency (PCE) when compared with single heterojunction (SHJ) cells. In this study, the major variables controlling the CHJ maximum power point and FF are determined using a combinatorial approach. By matching the maximum power point voltage (V_MPP) of the constituent parallel‐connected heterojunctions (subjunctions) and minimizing the injection barriers intrinsic to CHJs, high FF and PCE can be achieved. Optimized CHJ devices are demonstrated with >99% IQE in the interlayer and a 46% increase in PCE compared to a SHJ reference (4.1% versus 2.8%). Devices with a transparent exciton dissociation layer (EDL)/interlayer/acceptor structure are employed, such that each CHJ has absorption efficiency identical to its interlayer/acceptor SHJ counterpart. Using these results, a clear map of performance as a function of material parameters is developed, providing straightforward, universal design rules to guide future engineering of molecules and layer architectures for CHJ organic photovoltaic devices.     

An Efficient Solution‐Processed Intermediate Layer for Facilitating Fabrication of Organic Multi‐Junction Solar Cells

Photovoltaic tandem technology has the potential to boost the power conversion efficiency of organic photovoltaic devices. Here, a reliable and efficient fully solution‐processed intermediate layer (IML) consisting of ZnO and neutralized poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is demonstrated for series‐connected multi‐junction organic solar cells (OSCs). Drying at 80 °C in air is sufficient for this solution‐processed IML to obtain excellent functionality and reliability, which allow the use of most of high performance donor materials in the tandem structure. An open circuit voltage (V_oc) of 0.56 V is obtained for single‐junction OSCs based on a low band‐gap polymer, while multi‐junction OSCs based on the same absorber material deliver promising fill factor values along with fully additive V_oc as the number of junctions increase. Optical and electrical simulations, which are reliable and promising guidelines for the design and investigation of multi‐junction OSCs, are discussed. The outcome of optical and electrical simulations is in excellent agreement with the experimental data, indicating the outstanding efficiency and functionality of this solution‐processed IML. The demonstration of this efficient, solution‐processed IML represents a convenient way for facilitating fabrication of multi‐junction OSCs to achieve high power conversion efficiency.     

Controlling the Morphology and Efficiency of Hybrid ZnO:Polythiophene Solar Cells Via Side Chain Functionalization

The efficiency of polymer – metal oxide hybrid solar cells depends critically on the intimacy of mixing of the two semiconductors. The effect of side chain functionalization on the morphology and performance of conjugated polymer:ZnO solar cells is investigated. Using an ester‐functionalized side chain poly(3‐hexylthiophene‐2,5‐diyl) derivative (P3HT‐E), the nanoscale morphology of ZnO:polymer solar cells is significantly more intimately mixed compared to ZnO:poly(3‐hexylthiophene‐2,5‐diyl) (ZnO:P3HT), as evidenced experimentally from a 3D reconstruction of the phase separation using electron tomography. Photoinduced absorption reveals nearly quantitative charge generation for the ZnO:P3HT‐E blend but not for ZnO:P3HT, consistent with the results obtained from solving the 3D diffusion equation for excitons formed in the polymer within the two experimental ZnO morphologies. For thin ZnO:P3HT‐E active layers (～50 nm) this yields a significant improvement of the solar cell performance. For thicker cells, however, the reduced hole mobility and a reduced percolation of ZnO pathways hinders charge carrier collection, limiting the power conversion efficiency.