Ligand‐Assisted Assembly Approach to Synthesize Large‐Pore Ordered Mesoporous Titania with Thermally Stable and Crystalline Framework

A novel ligand‐assisted assembly approach is demonstrated for the synthesis of thermally stable and large‐pore ordered mesoporous titanium dioxide with a highly crystalline framework by using diblock copolymer poly(ethylene oxide)‐b‐polystyrene (PEO‐b‐PS) as a template and titanium isopropoxide (TIPO) as a precursor. Small‐angle X‐ray scattering, X‐ray diffraction (XRD), transmission electron microscopy (TEM), high‐resolution scanning electron microscopy, and N₂‐sorption measurements indicate that the obtained TiO₂ materials possess an ordered primary cubic mesostructure with large, uniform pore diameters of about 16.0 nm, and high Brunauer–Emmett–Teller surface areas of ～112 m² g^?1, as well as high thermal stability (～700 °C). High resolution TEM and wide‐angle XRD measurements clearly illustrate the high crystallinity of the mesoporous titania with an anatase structure in the pore walls. It is worth mentioning that, in this process, in addition to tetrahydrofuran as a solvent, acetylacetone was employed as a coordination agent to avoid rapid hydrolysis of the titanium precursor. Additionally, stepped evaporation and heating processes were adopted to control the condensation rate and facilitate the assembly of the ordered mesostructure, and ensure the formation of fully polycrystalline anatase titania frameworks without collapse of the mesostructure. By employing the obtained mesoporous and crystallized TiO₂ as the photoanode in a dye‐sensitized solar cell, a high power‐conversion efficiency (5.45%) can be achieved in combination with the N719 dye, which shows that this mesoprous titania is a great potential candidate as a catalyst support for photonic‐conversion applications.     

Ordered Hierarchical Mesoporous/Microporous Carbon Derived from Mesoporous Titanium‐Carbide/Carbon Composites and its Electrochemical Performance in Supercapacitor

Novel ordered hierarchical mesoporous/microporous carbon (OHMMC) derived from mesoporous titanium‐carbide/carbon composites was prepared for the first time by synthesizing ordered mesoporous nanocrystalline titanium‐carbide/carbon composites, followed by chlorination of titanium carbides. The mesostructure and microstructure can be conveniently tuned by controlling the TiC contents of mesoporous TiC/C composite precursor, and chlorination temperature. By optimal condition, the OHMMC has a high surface area (1917 m²g^?1), large pore volumes (1.24 cm³g^?1), narrow mesopore‐size distributions (centered at about 3 nm), and micropore size of 0.69 and 1.25 nm, and shows a great potential as electrode for supercapacitor applications: it exhibits a high capacitance of 146 Fg^?1 in noaqueous electrolyte and excellent rate capability. The ordered mesoporous channel pores are favorable for retention and immersion of the electrolyte, providing a more favorable path for electrolyte penetration and transportation to achieve promising rate capability performance. Meanwhile, the micropores drilled on the mesopore‐walls can increase the specific surface area to provide more sites for charge storage.     

Hierarchical Carbide‐Derived Carbon Foams with Advanced Mesostructure as a Versatile Electrochemical Energy‐Storage Material

Highly porous carbide‐derived carbon (CDC) mesofoams (DUT‐70) are prepared by nanocasting of mesocellular silica foams with a polycarbosilane precursor. Ceramic conversion followed by silica removal and high‐temperature chlorine treatment yields CDCs with a hierarchical micro‐mesopore arrangement. This new type of polymer‐based CDC is characterized by specific surface areas as high as 2700 m² g^?1, coupled with ultrahigh micro‐ and mesopore volumes up to 2.6 cm³ g^?1. The relationship between synthesis conditions and the properties of the resulting carbon materials is described in detail, allowing precise control of the properties of DUT‐70. Since the hierarchical pore system ensures both efficient mass transfer and high capacities, the novel CDC shows outstanding performance as an electrode material in electrochemical double‐layer capacitors (EDLCs) with specific capacities above 240 F g^?1 when measured in a symmetrical two‐electrode configuration. Remarkable capacities of 175 F g^?1 can be retained even at high current densities of 20 A g^?1 as a result of the enhanced ion‐transport pathways provided by the cellular mesostructure. Moreover, DUT‐70 can be infiltrated with sulfur and host the active material in lithium–sulfur battery cathodes. Reversible capacities of 790 mAh g^?1 are achieved at a current rate of C/10 after 100 cycles, which renders DUT‐70 an ideal support material for electrochemical energy‐storage applications.     

Hierarchical Porous Carbonized Co3O4 Inverse Opals via Combined Block Copolymer and Colloid Templating as Bifunctional Electrocatalysts in Li–O2 Battery

Hierarchically organized porous carbonized‐Co₃O₄ inverse opal nanostructures (C‐Co₃O₄ IO) are synthesized via complementary colloid and block copolymer self‐assembly, where the triblock copolymer Pluronic P123 acts as the template and the carbon source. These highly ordered porous inverse opal nanostructures with high surface area display synergistic properties of high energy density and promising bifunctional electrocatalytic activity toward both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). It is found that the as‐made C‐Co₃O₄ IO/Ketjen Black (KB) composite exhibits remarkably enhanced electrochemical performance, such as increased specific capacity (increase from 3591 to 6959 mA h g^?1), lower charge overpotential (by 284.4 mV), lower discharge overpotential (by 19.0 mV), and enhanced cyclability (about nine times higher than KB in charge cyclability) in Li–O₂ battery. An overall agreement is found with both C‐Co₃O₄ IO/KB and Co₃O₄ IO/KB in ORR and OER half‐cell tests using a rotating disk electrode. This enhanced catalytic performance is attributed to the porous structure with highly dispersed carbon moiety intact with the host Co₃O₄ catalyst.     

A Triphasic Bifunctional Oxygen Electrocatalyst with Tunable and Synergetic Interfacial Structure for Rechargeable Zn‐Air Batteries

Atomic‐scale design of interfacial structure is an intriguing but challenging approach to developing efficient heterogenous catalysts for bifunctional oxygen electrocatalysis. Herein, an exquisite triphasic interfacial structure featuring the encapsulation of Fe_xNi alloy in a graphitic shell with a partial exposure of the FeO_y thin‐layered surface is manipulated via an electronic modulation strategy. The spontaneous integration of well‐crystallized metal alloy, carbon shell with a tunable active FeO_y layer, not only guarantees smooth charge transfer across the thin oxide layer, but also generates the synergistic effect at the interface, thus dramatically boosting the intrinsic activity of oxygen catalysis. Benefiting from these attributes, the hybrid catalyst outperforms the commercial noble‐metal benchmarks with a higher half‐wave potential of 0.890 V for oxygen reduction reaction and lower overpotential of 308 mV at 10 mA cm^?2 for the oxygen evolution reaction in alkaline media. Beyond that, a high‐performance rechargeable Zn‐air battery is realized with a narrow voltage gap of 0.742 V and excellent cyclability over 500 cycles at 10 mA cm^?2, demonstrating the great potential of the as‐developed triphasic electrocatalyst for practical applications.     

All‐Solid‐State,Foldable, and Rechargeable Zn‐Air Batteries Based on Manganese Oxide Grown on Graphene‐Coated Carbon Cloth Air Cathode

Pliable, safe, and inexpensive energy storage devices are in demand to power modern flexible electronics. In this work, a foldable battery based on a solid‐state and rechargeable Zn‐air battery is introduced. The air cathode is prepared by coating graphene flakes on pretreated carbon cloth to form a dense, interconnected, and conducting carbon network. Manganese oxide hierarchical nanostructures are subsequently grown on the large surface area carbon network, leading to high loading of active catalyst per unit volume while maintaining the mechanical and electrical integrity of the air cathode. Solid‐state and rechargeable Zn‐air battery with such air cathode exhibits similar polarization curve and resistance at its flat and folded states. The folded battery is able to deliver a power density as high as ≈32 mW cm^?2 and good cycling stability of up to 110 cycles. In addition, the flat battery shows similar discharge/charge curve and stable cycling performance after 100 times of repeated folding and unfolding, indicating its high mechanical robustness.     

Revealing the Intercalation Mechanisms of Lithium,Sodium, and Potassium in Hard Carbon

Hard carbon is the most promising anode material for sodium‐ion batteries and potassium‐ion batteries owing to its high stability, widespread availability, low‐cost, and excellent performance. Understanding the carrier‐ion storage mechanism is a prerequisite for developing high‐performance electrode materials; however, the underlying ion storage mechanism in hard carbon has been a topic of debate because of its complex structure. Herein, it is demonstrated that the Li⁺‐, Na⁺‐, and K⁺‐ion storage mechanisms in hard carbon are based on the adsorption of ions on the surface of active sites (e.g., defects, edges, and residual heteroatoms) in the sloping voltage region, followed by intercalation into the graphitic layers in the low‐voltage plateau region. At a low current density of 3 mA g^–1, the graphitic layers of hard carbon are unlocked to permit Li⁺‐ion intercalation, resulting in a plateau region in the lithium‐ion batteries. To gain insights into the ion storage mechanism, experimental observations including various ex situ techniques, a constant‐current constant‐voltage method, and diffusivity measurements are correlated with the theoretical estimation of changes in carbon structures and insertion voltages during ion insertion obtained using the density functional theory.     

Highly Active Trimetallic NiFeCr Layered Double Hydroxide Electrocatalysts for Oxygen Evolution Reaction

The development of efficient and robust earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is an ongoing challenge. Here, a novel and stable trimetallic NiFeCr layered double hydroxide (LDH) electrocatalyst for improving OER kinetics is rationally designed and synthesized. Electrochemical testing of a series of trimetallic NiFeCr LDH materials at similar catalyst loading and electrochemical surface area shows that the molar ratio Ni:Fe:Cr = 6:2:1 exhibits the best intrinsic OER catalytic activity compared to other NiFeCr LDH compositions. Furthermore, these nanostructures are directly grown on conductive carbon paper for a high surface area 3D electrode that can achieve a catalytic current density of 25 mA cm^?2 at an overpotential as low as 225 mV and a small Tafel slope of 69 mV dec^?1 in alkaline electrolyte. The optimized NiFeCr catalyst is stable under OER conditions and X‐ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy, and elemental analysis confirm the stability of trimetallic NiFeCr LDH after electrochemical testing. Due to the synergistic interactions among the metal centers, trimetallic NiFeCr LDH is significantly more active than NiFe LDH and among the most active OER catalysts to date. This work also presents general strategies to design more efficient metal oxide/hydroxide OER electrocatalysts.     

MXene‐Based Mesoporous Nanosheets Toward Superior Lithium Ion Conductors

Although solid polymer electrolytes have some intrinsic advantages in synthesis and film processing compared with inorganic solid electrolytes, low ionic conductivities and mechanical moduli hamper their practical applications in lithium‐based batteries. Here, an efficient strategy is developed to produce a unique solid polymer electrolyte containing MXene‐based mesoporous silica nanosheets with a sandwich structure, which are fabricated via controllable hydrolysis of tetraethyl orthosilicate around the surface of MXene‐Ti₃C₂ under the direction of cationic surfactants. Such unique nanosheets not only exhibit individual, thin, and insulated features, but also possess abundant functional groups in mesopores and on the surface, which are favorable for the formation of Lewis acid–base interactions with anions in polymer electrolytes such as poly(propylene oxide) elastomer, enabling the fast Li⁺ transportation at the mesoporous nanosheets/polymer interfaces. As a consequence, a solid polymer electrolyte with high ionic conductivity of 4.6 × 10^?4 S cm^?1, high Young's modulus of 10.5 MPa, and long‐term electrochemical stability is achieved.     

Atomic Modulation of FeCo–Nitrogen–Carbon Bifunctional Oxygen Electrodes for Rechargeable and Flexible All‐Solid‐State Zinc–Air Battery

Rational design and exploration of robust and low‐cost bifunctional oxygen reduction/evolution electrocatalysts are greatly desired for metal–air batteries. Herein, a novel high‐performance oxygen electrode catalyst is developed based on bimetal FeCo nanoparticles encapsulated in in situ grown nitrogen‐doped graphitic carbon nanotubes with bamboo‐like structure. The obtained catalyst exhibits a positive half‐wave potential of 0.92 V (vs the reversible hydrogen electrode, RHE) for oxygen reduction reaction, and a low operating potential of 1.73 V to achieve a 10 mA cm^?2 current density for oxygen evolution reaction. The reversible oxygen electrode index is 0.81 V, surpassing that of most highly active bifunctional catalysts reported to date. By combining experimental and simulation studies, a strong synergetic coupling between FeCo alloy and N‐doped carbon nanotubes is proposed in producing a favorable local coordination environment and electronic structure, which affords the pyridinic N‐rich catalyst surface promoting the reversible oxygen reactions. Impressively, the assembled zinc–air batteries using liquid electrolytes and the all‐solid‐state batteries with the synthesized bifunctional catalyst as the air electrode demonstrate superior charging–discharging performance, long lifetime, and high flexibility, holding great potential in practical implementation of new‐generation powerful rechargeable batteries with portable or even wearable characteristic.     

Immobilization of glucose oxidase enzyme (GOD) in large pore ordered mesoporous cage-like FDU-1 silica

Large pore ordered mesoporous silica FDU-1 with three-dimensional (3D) face-centered cubic, Fm3m arrangement of mesopores, was synthesized under strong acid media using B-50-6600 poly(ethylene oxide)–poly(butylene oxide)–poly(ethylene oxide) triblock copolymer (EO₃₉BO₄₇EO₃₉), tetraethyl orthosilicate (TEOS) and trimethyl-benzene (TMB). Large pore FDU-1 silica was obtained by using the following gel composition 1TEOS:0.00735B50-6600:0.00735TMB:6HCl:155H₂O. The pristine material exhibited a BET specific surface area of 684 m² g⁻¹, total pore volume of 0.89 cm³ g⁻¹, external surface area of 49 m² g⁻¹ and microporous volume of 0.09 cm³ g⁻¹. The enzyme activity was determined by the Flow Injection Analysis-Chemiluminescence (FIA-CL) method. For GOD immobilized on the FDU-1 silica, GOD supernatant and GOD solution, the FIA-CL results were 9.0, 18.6 and 34.0 U, respectively. The value obtained for the activity of the GOD solution with FIA-CL method is in agreement with the 35 U, obtained by spectrophotometry.     

Nanoconfined Carbon‐Coated Na3V2(PO4)3 Particles in Mesoporous Carbon Enabling Ultralong Cycle Life for Sodium‐Ion Batteries

Na₃V₂(PO₄)₃ (denoted as NVP) has been considered as a promising cathode material for room temperature sodium ion batteries. Nevertheless, NVP suffers from poor rate capability resulting from the low electronic conductivity. Here, the feasibility to approach high rate capability by designing carbon‐coated NVP nanoparticles confined into highly ordered mesoporous carbon CMK‐3 matrix (NVP@C@CMK‐3) is reported. The NVP@C@CMK‐3 is prepared by a simple nanocasting technique. The electrode exhibits superior rate capability and ultralong cyclability (78 mA h g^?1 at 5 C after 2000 cycles) compared to carbon‐coated NVP and pure NVP cathode. The improved electrochemical performance is attributed to double carbon coating design that combines a variety of advantages: very short diffusion length of Na⁺/e^? in NVP, easy access of electrolyte, and short transport path of Na⁺ through carbon toward the NVP nanoparticle, high conductivity transport of electrons through the 3D interconnected channels of carbon host. The optimum design of the core–shell nanostructures with double carbon coating permits fast kinetics for both transported Na⁺ ions and electrons, enabling high‐power performance.     

3D Vertically Aligned and Interconnected Porous Carbon Nanosheets as Sulfur Immobilizers for High Performance Lithium‐Sulfur Batteries

A unique nanostructure of 3D and vertically aligned and interconnected porous carbon nanosheets (3D‐VCNs) is demonstrated by a simple carbonization of agar. The key feature of 3D‐VCNs is that they possess numerous 3D channels with macrovoids and mesopores, leading to high surface area of 1750 m² g^?1, which play an important role in loading large amount of sulfur, while vertically aligned microporous carbon nanosheets act as the multilayered physical barrier against polysulfides anions and prevent their dissolution in the electrolyte due to strong adsorption during cycling process. As a result, the 3D hybrid (3D‐S‐VCNs) infiltered with 68.3 wt% sulfur exhibits a high and stable reversible capacity of 844 mAh g^?1 at the current density of 837 mA g^?1 with excellent Coulombic efficiency ≈100%, capacity retention of ≈80.3% over 300 cycles, and good rate ability (the reversible capacity of 738 mAh g^?1 at the high current density of 3340 mA g^?1). The present work highlights the vital role of the introduction of 3D carbon nanosheets with macrovoids and mesopores in enhancing the performance of LSBs.     

A Highly Order‐Structured Membrane Electrode Assembly with Vertically Aligned Carbon Nanotubes for Ultra‐Low Pt Loading PEM Fuel Cells

A simple method was developed to prepare ultra‐low Pt loading membrane electrode assembly (MEA) using vertically aligned carbon nanotubes (VACNTs) as highly ordered catalyst support for PEM fuel cells application. In the method, VACNTs were directly grown on the cheap household aluminum foil by plasma enhanced chemical vapor deposition (PECVD), using Fe/Co bimetallic catalyst. By depositing a Pt thin layer on VACNTs/Al and subsequent hot pressing, Pt/VACNTs can be 100% transferred from Al foil onto polymer electrolyte membrane for the fabrication of MEA. The whole transfer process does not need any chemical removal and destroy membrane. The PEM fuel cell with the MEA fabricated using this method showed an excellent performance with ultra‐low Pt loading down to 35 μg cm^?2 which was comparable to that of the commercial Pt catalyst on carbon powder with 400 μg cm^?2. To the best of our knowledge, for the first time, we identified that it is possible to substantially reduce the Pt loading one order by application of order‐structured electrode based on VACNTs as Pt catalysts support, compared with the traditional random electrode at a comparable performance through experimental and mathematical methods.     

Design Principles for Optimum Performance of Porous Carbons in Lithium–Sulfur Batteries

A series of experiments is presented that establishes for the first time the role of some of the key design parameters of porous carbons including surface area, pore volume, and pore size on battery performance. A series of hierarchical porous carbons is used as a model system with an open, 3D, interconnected porous framework and highly controlled porosity. Specifically, carbons with surface areas ranging from ≈500–2800 m² g^?1, pore volume from ≈0.6–5 cm³ g^?1, and pore size from micropores (≈1 nm) to large mesopores (≈30 nm) are synthesized and tested. At high sulfur loadings (≈80 wt% S), pore volume is more important than surface area with respect to sulfur utilization. Mesopore size, in the range tested, does not affect the sulfur utilization. No relationship between porosity and long‐term cycle life is observed. All systems fail after 200–300 cycles, which is likely due to the consumption of the LiNO₃ additive over cycling. Moreover, cryo‐scanning transmission electron microscopy imaging of these carbon–sulfur composites combined with X‐ray diffraction (XRD) provides further insights into the effect of initial sulfur distribution on sulfur utilization while also revealing the inadequacy of the indirect characterization techniques alone in reliably predicting distribution of sulfur within porous carbon matrices.     

Solar‐Light‐Driven CO2 Reduction by CH4 on Silica‐Cluster‐Modified Ni Nanocrystals with a High Solar‐to‐Fuel Efficiency and Excellent Durability

Catalytic CO₂ reforming of CH₄ (CRM) to produce syngas (H₂ and CO) provides a promising approach to reducing global CO₂ emissions and the extensive utilization of natural gas resources. However, the rapid deactivation of the reported catalysts due to severe carbon deposition at high reaction temperatures and the large energy consumption of the process hinder its industrial application. Here, a method for almost completely preventing carbon deposition is reported by modifying the surface of Ni nanocrystals with silica clusters. The obtained catalyst exhibits excellent durability for CRM with almost no carbon deposition and deactivation after reaction for 700 h. Very importantly, it is found that CRM on the catalyst can be driven by focused solar light, thus providing a promising new approach to the conversion of renewable solar energy to fuel due to the highly endothermic characteristics of CRM. The reaction yields high production rates of H₂ and CO (17.1 and 19.9 mmol min^?1 g^?1, respectively) with a very high solar‐to‐fuel efficiency (η, 12.5%). Even under focused IR irradiation with a wavelength above 830 nm, the η of the catalyst remains as high as 3.1%. The highly efficient catalytic activity arises from the efficient solar‐light‐driven thermocatalytic CRM enhanced by a novel photoactivation effect.     

Iron‐Oxide‐Based Advanced Anode Materials for Lithium‐Ion Batteries

Iron oxides, such as Fe₂O₃ and Fe₃O₄, have recently received increased attention as very promising anode materials for rechargeable lithium‐ion batteries (LIBs) because of their high theoretical capacity, non‐toxicity, low cost, and improved safety. Nanostructure engineering has been demonstrated as an effective approach to improve the electrochemical performance of electrode materials. Here, recent research progress in the rational design and synthesis of diverse iron oxide‐based nanomaterials and their lithium storage performance for LIBs, including 1D nanowires/rods, 2D nanosheets/flakes, 3D porous/hierarchical architectures, various hollow structures, and hybrid nanostructures of iron oxides and carbon (including amorphous carbon, carbon nanotubes, and graphene). By focusing on synthesis strategies for various iron‐oxide‐based nanostructures and the impacts of nanostructuring on their electrochemical performance, novel approaches to the construction of iron‐oxide‐based nanostructures are highlighted and the importance of proper structural and compositional engineering that leads to improved physical/chemical properties of iron oxides for efficient electrochemical energy storage is stressed. Iron‐oxide‐based nanomaterials stand a good chance as negative electrodes for next generation LIBs.     

Vertically Grown Edge‐Rich Graphene Nanosheets for Spatial Control of Li Nucleation

Inhomogeneous mass and charge transfers induce severe Li dendrite formation, impeding the service of Li metal anodes in rechargeable batteries. Various 3D hosts are proposed to address the related issues. To enable better progress, hybrid micro/nanostructures with the ability to realize spatial control of Li deposition over nucleation should be developed. Here, it is demonstrated that edge‐rich graphene (ERG), which is vertically grown on a 3D carbon nanofiber (CNF) substrate via a simple chemical vapor deposition method, can serve as nanoseeds to reduce the nucleation overpotential of Li effectively and guide the Li deposition on the 3D CNF substrate uniformly, free from dendrites. Different from the case in other sp² carbon featuring interconnected graphitic structures such as planar graphene, the zero nucleation overpotential presented by ERG is attributed to its unique electron properties (i.e., the enhanced surface electronegativity) and its open architecture. Compared to the pristine CNF host, the ERG‐hybridized one resolves the problems of the Li metal anode better, endowing a practical Li battery with a long lifespan of 1000 cycles with a Coulombic efficiency of 99.7%. The results present novel sights for developing next‐generation Li‐carbon anodes with high cycling stability.     

Selective Etching of Nitrogen‐Doped Carbon by Steam for Enhanced Electrochemical CO2 Reduction

Nitrogen‐doped carbon structures have recently been demonstrated as a promising candidate for electrocatalytic CO₂ reduction, while in the meantime the pyridinic and graphitic nitrogen atoms also present high activities for electroreduction of water. Here, an etching strategy that uses hot water steam to preferentially bind to pyridinic and graphitic nitrogen atoms and subsequently etch them in carbon frameworks is reported. As a result, pyrrolic nitrogen atoms with low water affinity are retained after the steam etching, with a much increased level of among all nitrogen species from 22.1 to 55.9%. The steam‐etched nitrogen‐doped carbon catalyst enables excellent electrocatalytic CO₂ reduction performance but low hydrogen evolution reaction activity, suggesting a new approach for tuning electrocatalyst activity.     

Flexible Nano‐felts of Carbide‐Derived Carbon with Ultra‐high Power Handling Capability

Nano‐fibrous felts (nano‐felts) of carbide‐derived carbon (CDC) have been developed from the precursor of electrospun titanium carbide (TiC) nano‐felts. Conformal transformation of TiC into CDC conserves main features of the precursor including the high interconnectivity and structural integrity; the developed TiC‐CDC nano‐felts are mechanically flexible/resilient, and can be used as electrode material for supercapacitor application without the addition of any binder. After synthesis through chlorination of the precursor at 600 °C, the TiC‐CDC nano‐fibers show an average pore size of ～1nm, a high specific surface area of 1390 m²/g; and the nano‐fibers have graphitic carbon ribbons embedded in a highly disordered carbon matrix. Graphitic carbon is preserved from the precursor nano‐fibers where a few graphene layers surround TiC nanocrystallites. Electrochemical measurements show a high gravimetric capacitance of 110 F/g in aqueous electrolyte (1 M H₂SO₄) and 65 F/g in organic electrolyte (1.5 M TEA‐BF₄ in acetonitrile). Because of the unique microstructure of TiC‐CDC nano‐felts, a fade of the capacitance of merely 50% at a high scan rate of 5 V/s is observed. A fade of just 15% is observed for nano‐felt film electrodes tested in 1 M H₂ SO₄ at 1 V/s, resulting in a high gravimetric capacitance of 94 F/g. Such a high rate performance is only known for graphene or carbon‐onion based supercapacitors, whereas binders have to be used for the fabrication of those supercapacitors.