Structural plasticity in self-assembling transmembrane β-sheets

Here we test the hypothesis that membrane-spanning β-sheets can exhibit structural plasticity in membranes due to their ability to shift hydrogen-bonding patterns. Transmembrane β-sheet forming peptides of the sequence AcWL_n, where n = 5, 6, or 7, which range from 21 to 27 Å in maximum length, were incorporated into bilayers made of phosphatidylcholine lipids with saturated acyl chains containing 14, 16, or 18 carbons, which are 36–50 Å in thickness. The effect of the peptide β-sheets on fluid- and gel-phase bilayers were studied with differential scanning calorimetry and circular dichroism spectroscopy. We show that AcWL₅ forms a stable, peptide-rich gel phase in all three lipids. The whole family of AcWL_n peptides appears to form similarly stable, nonmembrane-disrupting β-sheets in all bilayer phases and thicknesses. Bilayers containing up to 20 mol % peptide, which is the maximum concentration tested, formed gel phases with melting temperatures that were equal to, or slightly higher than, the pure lipid transitions. Given the range of peptide lengths and bilayer thicknesses tested, these experiments show that the AcWL_n family of membrane-inserted β-sheets exhibit remarkable structural plasticity in membranes.     

Association of neighboring β-strands of outer membrane protein A in lipid bilayers revealed by site-directed fluorescence quenching

We present a detailed study on the formation of neighboring β-strands during the folding of a monomeric integral membrane protein of the β-barrel type. β-Strand and β-barrel formations were investigated for the eight-stranded transmembrane domain of outer membrane protein A (OmpA) with single-tryptophan (W), single-cysteine (C) OmpA mutants. Based on the OmpA structure, W and C were introduced in two neighboring β-strands oriented toward the hydrocarbon core of the membrane. Replaced residue pairs were closer to either the periplasmic turns (named cis-side) or the outer loops (named trans-side) of the strand. W_nC_m OmpA mutants containing W at position n and C at position m along the polypeptide chain were labeled at the C by a nitroxyl spin label, which is a short-range fluorescence quencher. To monitor the association of neighboring β-strands, we determined the proximity between fluorescent W and labeled C in OmpA folding experiments by intramolecular fluorescence quenching. Formation of native β-strand contacts in folding experiments required the lipid membrane. Residues in the trans-side of strands β₁, β₂, and β₃, represented by mutants W₁₅C₃₅ (β₁β₂, trans) and W₅₇C₃₅ (β₃β₂, trans), reached close proximity prior to residues in the N(β₁)- and C(β₈)-terminal strands as examined for mutants W₁₅C₁₆₂ (β₁β₈, trans) and W₇C₁₇₀ (β₁β₈, cis). Tryptophan and cysteine converged slightly faster in W₁₅C₁₆₂ (β₁β₈, trans) than in W₇C₁₇₀ (β₁β₈, cis). The last folding step was observed for residues at the cis-ends of strands β₁ and β₂ for the mutant W₇C₄₃ (β₁β₂, cis). The data also demonstrate that the neighboring β-strands associate upon insertion into the hydrophobic core of the lipid bilayer.     

β-Barrel membrane protein folding and structure viewed through the lens of α-hemolysin

The β-barrel is a transmembrane structural motif commonly encountered in bacterial outer membrane proteins and pore-forming toxins (PFTs). α-Hemolysin (αHL) is a cytotoxin secreted by Staphylococcus aureus that assembles from a water-soluble monomer to form a membrane-bound heptameric β-barrel on the surface of susceptible cells, perforating the cell membranes, leading to cell death and lysis. The mechanism of heptamer assembly, which has been studied extensively, occurs in a stepwise manner, and the structures of the initial, monomeric form and final, membrane-embedded pore are known. The toxin's ability to assemble from an aqueous, hydrophilic species to a membrane-inserted oligomer is of interest in understanding the assembly of PFTs in particular and the folding and structure of β-barrel membrane proteins in general. Here we review the structures of the monomeric and heptamer states of LukF and αHL, respectively, the mechanism of toxin assembly, and the relationships between αHL and nontoxin β-barrel membrane proteins.     

Sequential Steps in the Assembly of the Multimeric Outer Membrane Secretin PulD

Investigations into protein folding are largely dominated by studies on monomeric proteins. However, the transmembrane domain of an important group of membrane proteins is only formed upon multimerization. Here, we use in vitro translation-coupled folding and insertion into artificial liposomes to investigate kinetic steps in the assembly of one such protein, the outer membrane secretin PulD of the bacterial type II secretion system. Analysis of the folding kinetics, measured by the acquisition of distinct determinants of the native state, provides unprecedented evidence for a sequential multistep process initiated by membrane-driven oligomerization. The effects of varying the lipid composition of the liposomes indicate that PulD first forms a “prepore” structure that attains the native state via a conformational switch.     

Beta-barrel membrane protein folding and structure viewed through the lens of alpha-hemolysin

The beta-barrel is a transmembrane structural motif commonly encountered in bacterial outer membrane proteins and pore-forming toxins (PFTs). Alpha-hemolysin (alphaHL) is a cytotoxin secreted by Staphylococcus aureus that assembles from a water-soluble monomer to form a membrane-bound heptameric beta-barrel on the surface of susceptible cells, perforating the cell membranes, leading to cell death and lysis. The mechanism of heptamer assembly, which has been studied extensively, occurs in a stepwise manner, and the structures of the initial, monomeric form and final, membrane-embedded pore are known. The toxin's ability to assemble from an aqueous, hydrophilic species to a membrane-inserted oligomer is of interest in understanding the assembly of PFTs in particular and the folding and structure of beta-barrel membrane proteins in general. Here we review the structures of the monomeric and heptamer states of LukF and alphaHL, respectively, the mechanism of toxin assembly, and the relationships between alphaHL and nontoxin beta-barrel membrane proteins.     

Characterization of a subunit structure and stability of the recombinant porin fromNeisseria gonorrhoeae

An outer membrane PIA protein fromNeisseria gonorrhoeae strain FA19 was expressed inEscherichia coli and refoldedin vitro in the presence of zwitterionic detergent. Its proper folding and subunit organization was confirmed by comparison with the native counterpart. The unfolding of PIA has been investigated using fluorescence spectroscopy and analytical size-exclusion chromatography methods. Analysis of the denaturation pathway of the PIA revealed that it forms an unusually labile quaternary structure. In the presence of 1 M guanidinium chloride (GdmCl) or upon heating up to 50°C, dissociation of the PIA oligomer was observed resulting in the formation of folded monomeric intermediates. Unfolding of monomers occurs at 80°C or in the presence of 4.3 M GdmCl, indicating high intrinsic stability toward both GdmCl and elevated temperatures. Both oligomeric and monomeric forms of PIA exhibited affinity to the hydrophobic probe 1-anilinonaphthalene-8-sulfonic acid (ANS) and bind withK _d=80 and 130 μM, respectively. Denaturation of the PIA completely abolished affinity to ANS, suggesting that hydrophobicity is a property of the folded state of the porin.     

Fluidizing the membrane by a local anesthetic: phenylethanol affects membrane protein oligomerization

The exact mechanism of action of anesthetics is still an open question. While some observations suggest specific anesthetic-protein interactions, nonspecific perturbation of the lipid bilayer has also been suggested. Perturbations of bilayer properties could subsequently affect the structure and function of membrane proteins. Addition of the local anesthetic phenylethanol (PEtOH) to model membranes and intact Escherichia coli cells not only affected membrane fluidity but also severely altered the defined helix-helix interaction within the membrane. This experimental observation suggests that certain anesthetics modulate membrane physical properties and thereby indirectly affect transmembrane (TM) helix-helix interactions, which are not only involved in membrane protein folding and assembly but also important for TM signaling.     

Rhodopsin/Lipid Hydrophobic Matching—Rhodopsin Oligomerization and Function

Lipid composition of the membrane and rhodopsin packing density strongly modulate the early steps of the visual response of photoreceptor membranes. In this study, lipid-order and bovine rhodopsin function in proteoliposomes composed of the sn-1 chain perdeuterated lipids 14:0_d27-14:1-PC, 16:0_d31-16:1-PC, 18:0_d35-18:1-PC, or 20:0_d39-20:1-PC at rhodopsin/lipid molar ratios from 1:70 to 1:1000 (mol/mol) were investigated. Clear evidence for matching of hydrophobic regions on rhodopsin transmembrane helices and hydrophobic thickness of lipid bilayers was observed from ²H nuclear magnetic resonance order parameter measurements at low rhodopsin concentrations. Thin bilayers stretched to match the length of transmembrane helices observed as increase of sn-1 chain order, while thicker bilayers were compressed near the protein. A quantitative analysis of lipid-order parameter changes suggested that the protein adjusts its conformation to bilayer hydrophobic thickness as well, which confirmed our earlier circular-dichroism measurements. Changes in lipid order parameters upon rhodopsin incorporation vanished for bilayers with a hydrophobic thickness of 27 ± 1 Å, suggesting that this is the bilayer thickness at which rhodopsin packs in bilayers at the lowest membrane perturbation. The lipid-order parameter studies also indicated that a hydrophobic mismatch between rhodopsin and lipids triggers rhodopsin oligomerization with increasing rhodopsin concentrations. Both hydrophobic mismatch and rhodopsin oligomerization result in substantial shifts of the equilibrium between the photointermediates metarhodopsin I and metarhodopsin II; increasing bilayer thickness favors formation of metarhodopsin II while oligomerization favors metarhodopsin I. The results highlight the importance of hydrophobic matching for rhodopsin structure, oligomerization, and function.     

Membrane protein folding and oligomerization: the two-stage model.

We discuss the view that the folding of many, perhaps most, integral membrane proteins can be considered as a two-stage process. In stage I, hydrophobic alpha-helices are established across the lipid bilayer. In stage II, they interact to form functional transmembrane structures. This model is suggested by the nature of transmembrane segments in known structures, refolding experiments, the assembly of integral membrane protein from fragments, and the existence of very small integral membrane protein subunits. It may extend to proteins with a variety of functions, including the formation of transmembrane aqueous channels. The model is discussed in the context of the forces involved in membrane protein folding and the interpretation of sequence data.     

Protein modulation of lipids, and vice-versa, in membranes

This review describes: (i) perturbations of the membrane lipids that are induced by integral membrane proteins, and reciprocally, (ii) the effects that the lipids may have on the function of membrane-associated proteins. Topics of the first category that are covered include: stoichiometry and selectivity of the first shell of lipids associated at the intramembranous perimeter of transmembrane proteins; the chain configuration and exchange rates of the first-shell lipids; the effects of transmembrane peptides on transbilayer movement of lipids (flip-flop); the effects of membrane proteins on lipid polymorphism and formation of non-lamellar phases; and the effects of hydrophobic mismatch on lipid chain configuration, phase stability and selectivity of lipid-protein association. Topics of the second category are: the influence of lipid selectivity on conformational changes in the protein; the effects of elastic fluctuations of the lipid bilayer on protein insertion and orientation in membranes; the effects of hydrophobic matching on intramembrane protein-protein association; and the effects of intrinsic lipid curvature on membrane integration, oligomer formation and activity of membrane proteins.     

In vitro Unfolding and Refolding of the Small Multidrug Transporter EmrE

The composition of the lipid bilayer is increasingly being recognised as important for the regulation of integral membrane protein folding and function, both in vivo and in vitro. The folding of only a few membrane proteins, however, has been characterised in different lipid environments. We have refolded the small multidrug transporter EmrE in vitro from a denatured state to a functional protein and monitored the influence of lipids on the folding process. EmrE is part of a multidrug resistance protein family that is highly conserved amongst bacteria and is responsible for bacterial resistance to toxic substances. We find that the secondary structure of EmrE is very stable and only small amounts are denatured even in the presence of unusually high denaturant concentrations involving a combination of 10 M urea and 5% SDS. Substrate binding by EmrE is recovered after refolding this denatured protein into dodecylmaltoside detergent micelles or into lipid vesicles. The yield of refolded EmrE decreases with lipid bilayer compositional changes that increase the lateral chain pressure within the bilayer, whilst conversely, the apparent rate of folding seems to increase. These results add further weight to the hypothesis that an increased lateral chain pressure hinders protein insertion across the bilayer. Once the protein is inserted, however, the greater pressure on the transmembrane helices accelerates correct packing and final folding. This work augments the relatively small number of biophysical folding studies in vitro on helical membrane proteins.     

Binding of β-Amyloid (1-42) Peptide to Negatively Charged Phospholipid Membranes in the Liquid-Ordered State: Modeling and Experimental Studies

To explore the initial stages of amyloid β peptide (Aβ42) deposition on membranes, we have studied the interaction of Aβ42 in the monomeric form with lipid monolayers and with bilayers in either the liquid-disordered or the liquid-ordered (L_o) state, containing negatively charged phospholipids. Molecular dynamics (MD) simulations of the system have been performed, as well as experimental measurements. For bilayers in the L_o state, in the absence of the negatively charged lipids, interaction is weak and it cannot be detected by isothermal calorimetry. However, in the presence of phosphatidic acid, or of cardiolipin, interaction is detected by different methods and in all cases interaction is strongest with lower (2.5–5 mol %) than higher (10–20 mol %) proportions of negatively charged phospholipids. Liquid-disordered bilayers consistently allowed a higher Aβ42 binding than L_o ones. Thioflavin T assays and infrared spectroscopy confirmed a higher proportion of β-sheet formation under conditions when higher peptide binding was measured. The experimental results were supported by MD simulations. We used 100 ns MD to examine interactions between Aβ42 and three different 512 lipid bilayers consisting of palmitoylsphingomyelin, dimyristoyl phosphatidic acid, and cholesterol in three different proportions. MD pictures are different for the low- and high-charge bilayers, in the former case the peptide is bound through many contact points to the bilayer, whereas for the bilayer containing 20 mol % anionic phospholipid only a small fragment of the peptide appears to be bound. The MD results indicate that the binding and fibril formation on the membrane surface depends on the composition of the bilayer, and is the result of a subtle balance of many inter- and intramolecular interactions between the Aβ42 and membrane.     

Fluid Mechanical Matching of H-ATP Synthase Subunit c-Ring with Lipid Membranes Revealed by H Solid-State NMR

The F₁F_o-ATP synthase utilizes the transmembrane H⁺ gradient for the synthesis of ATP. F_o subunit c-ring plays a key role in transporting H⁺ through F_o in the membrane. We investigated the interactions of Escherichia coli subunit c with dimyristoylphosphatidylcholine (DMPC-d₅₄) at lipid/protein ratios of 50:1 and 20:1 by means of ²H-solid-state NMR. In the liquid-crystalline state of DMPC, the ²H-NMR moment values and the order parameter (S_CD) profile were little affected by the presence of subunit c, suggesting that the bilayer thickness in the liquid-crystalline state is matched to the transmembrane hydrophobic surface of subunit c. On the other hand, hydrophobic mismatch of subunit c with the lipid bilayer was observed in the gel state of DMPC. Moreover, the viscoelasticity represented by a square-law function of the ²H-NMR relaxation was also little influenced by subunit c in the fluid phase, in contrast with flexible nonionic detergents or rigid additives. Thus, the hydrophobic matching of the lipid bilayer to subunit c involves at least two factors, the hydrophobic length and the fluid mechanical property. These findings may be important for the torque generation in the rotary catalytic mechanism of the F₁F_o-ATPse molecular motor.     

Membrane properties of amacrocyclic tetraether bisphosphatidylcholine lipid: Effect of a single membrane-spanning polymethylene cross-linkage between two head groups of ditetradecylphosphatidylcholine membrane

The plasma membranes of archaea are abundant in macrocyclic tetraether lipids that contain a single or double long transmembrane hydrocarbon chains connecting the two glycerol backbones at both ends. In this study, a novel amacrocyclic bisphosphatidylcholine lipid bearing a single membrane-spanning octacosamethylene chain, 1,1’-O-octacosamethylene-2,2′-di-O-tetradecyl-bis-(sn-glycero)-3,3′-diphosphocholine (AC-(di-O-C14PC)₂), was synthesized to elucidate effects of the interlayer cross-linkage on membrane properties based on comparison with its corresponding diether phosphatidylcholine, 1,2-di-O-tetradecyl-sn-glycero-3-phosphocholine (DTPC), that forms bilayer membrane. Several physicochemical techniques demonstrated that while AC-(di-O-C14PC)₂ monolayer, which adopts a particularly high-ordered structure in the gel phase, shows remarkably high thermotropic transition temperature compared to DTPC bilayer, the fluidity of both phospholipids above the transition temperature is comparable. Nonetheless, the fluorescent dye leakage from inside the AC-(di-O-C14PC)₂ vesicles in the fluid phase is highly suppressed. The origin of the membrane properties characteristic of AC-(di-O-C14PC)₂ monolayer is discussed in terms of the single long transmembrane hydrophobic linkage and the diffusional motion of the lipid molecules.     

pH-sensitive membrane peptides (pHLIPs) as a novel class of delivery agents

Abstract

Here we review a novel class of delivery vehicles based on pH-sensitive, moderately polar membrane peptides, which we call pH (Low) Insertion Peptides (pHLIPs), that target cells located in the acidic environment found in many diseased tissues, including tumours. Acidity targeting by pHLIPs is achieved as a result of helix formation and transmembrane insertion. In contrast to the earlier technologies based on cell-penetrating peptides, pHLIPs act as monomeric membrane-inserting peptides that translocate one terminus across a membrane into the cytoplasm, while the other terminus remains in the extracellular space, locating the peptide in the membrane lipid bilayer. Therefore pHLIP has a dual delivery capability: it can tether cargo molecules or nanoparticles to the surfaces of cells in diseased tissues and/or it can move a cell-impermeable cargo molecule across the membrane into the cytoplasm. The source of energy for moving polar molecules attached to pHLIP through the hydrophobic layer of a membrane bilayer is the membrane-associated folding of the polypeptide. A drop in pH leads to the protonation of negatively charged residues (Asp or Glu), which enhances peptide hydrophobicity, increasing the affinity of the peptide for the lipid bilayer and triggering peptide folding and subsequent membrane insertion. The process is accompanied by the release of energy that can be utilized to move cell-impermeable cargo across a membrane. That the mechanism is now understood, and that targeting of tumours in mice has been shown, suggest a number of future applications of the pHLIP technology in the diagnosis and treatment of disease.     

A Non-classical Assembly Pathway of Escherichia coli Pore-forming Toxin Cytolysin A

Cytolysin A (ClyA) is an α-pore forming toxin from pathogenic Escherichia coli (E. coli) and Salmonella enterica. Here, we report that E. coli ClyA assembles into an oligomeric structure in solution in the absence of either bilayer membranes or detergents at physiological temperature. These oligomers can rearrange to create transmembrane pores when in contact with detergents or biological membranes. Intrinsic fluorescence measurements revealed that oligomers adopted an intermediate state found during the transition between monomer and transmembrane pore. These results indicate that the water-soluble oligomer represents a prepore intermediate state. Furthermore, we show that ClyA does not form transmembrane pores on E. coli lipid membranes. Because ClyA is delivered to the target host cell in an oligomeric conformation within outer membrane vesicles (OMVs), our findings suggest ClyA forms a prepore oligomeric structure independently of the lipid membrane within the OMV. The proposed model for ClyA represents a non-classical pathway to attack eukaryotic host cells.     

Repositioning of Transmembrane α-Helices during Membrane Protein Folding

We have determined the optimal placement of individual transmembrane helices in the Pyrococcus horikoshii Glt_Ph glutamate transporter homolog in the membrane. The results are in close agreement with theoretical predictions based on hydrophobicity, but do not, in general, match the known three-dimensional structure, suggesting that transmembrane helices can be repositioned relative to the membrane during folding and oligomerization. Theoretical analysis of a database of membrane protein structures provides additional support for this idea. These observations raise new challenges for the structure prediction of membrane proteins and suggest that the classical two-stage model often used to describe membrane protein folding needs to be modified.     

Serum Albumin's Protective Inhibition of Amyloid-β Fiber Formation Is Suppressed by Cholesterol,Fatty Acids and Warfarin

Central to Alzheimer's disease (AD) pathology is the assembly of monomeric amyloid-β peptide (Aβ) into oligomers and fibers. The most abundant protein in the blood plasma and cerebrospinal fluid is human serum albumin. Albumin can bind to Aβ and is capable of inhibiting the fibrillization of Aβ at physiological (μM) concentrations. The ability of albumin to bind Aβ has recently been exploited in a phase II clinical trial, which showed a reduction in cognitive decline in AD patients undergoing albumin–plasma exchange. Here we explore the equilibrium between Aβ monomer, oligomer and fiber in the presence of albumin. Using transmission electron microscopy and thioflavin-T fluorescent dye, we have shown that albumin traps Aβ as oligomers, 9 nm in diameter. We show that albumin-trapped Aβ oligomeric assemblies are not capable of forming ion channels, which suggests a mechanism by which albumin is protective in Aβ-exposed neuronal cells. In vivo albumin binds a variety of endogenous and therapeutic exogenous hydrophobic molecules, including cholesterol, fatty acids and warfarin. We show that these molecules bind to albumin and suppress its ability to inhibit Aβ fiber formation. The interplay between Aβ, albumin and endogenous hydrophobic molecules impacts Aβ assembly; thus, changes in cholesterol and fatty acid levels in vivo may impact Aβ fibrillization, by altering the capacity of albumin to bind Aβ. These observations are particularly intriguing given that high cholesterol or fatty acid diets are well-established risk factors for late-onset AD.     

In-Situ Observation of Membrane Protein Folding during Cell-Free Expression

Proper insertion, folding and assembly of functional proteins in biological membranes are key processes to warrant activity of a living cell. Here, we present a novel approach to trace folding and insertion of a nascent membrane protein leaving the ribosome and penetrating the bilayer. Surface Enhanced IR Absorption Spectroscopy selectively monitored insertion and folding of membrane proteins during cell-free expression in a label-free and non-invasive manner. Protein synthesis was performed in an optical cell containing a prism covered with a thin gold film with nanodiscs on top, providing an artificial lipid bilayer for folding. In a pilot experiment, the folding pathway of bacteriorhodopsin via various secondary and tertiary structures was visualized. Thus, a methodology is established with which the folding reaction of other more complex membrane proteins can be observed during protein biosynthesis (in situ and in operando) at molecular resolution.     

Characterization of Denatured States and Reversible Unfolding of Sensory Rhodopsin II

Our understanding on the folding of membrane proteins lags behind that of soluble proteins due to challenges posed by the exposure of hydrophobic regions during in vitro chemical denaturation and refolding experiments. While different folding models are accepted for soluble proteins, only the two-stage model and the long-range interactions model have been proposed so far for helical membrane proteins. To address our knowledge gap on how different membrane proteins traverse their folding pathways, we have systematically investigated the structural features of SDS-denatured states and the kinetics for reversible unfolding of sensory rhodopsin II (pSRII), a retinal-binding photophobic receptor from Natronomonas pharaonis. pSRII is difficult to denature, and only SDS can dislodge the retinal chromophore without rapid aggregation. Even in 30% SDS (0.998 Χ_SDS), pSRII retains the equivalent of six out of seven transmembrane helices, while the retinal-binding pocket is disrupted, with transmembrane residues becoming more solvent exposed. Folding of pSRII from an SDS-denatured state harboring a covalently bound retinal chromophore shows deviations from an apparent two-state behavior. SDS denaturation to form the sensory opsin apo-protein is reversible. We report pSRII as a new model protein which is suitable for membrane protein folding studies and has a unique folding mechanism that differs from those of bacteriorhodopsin and bovine rhodopsin.