共查询到20条相似文献,搜索用时 15 毫秒
1.
Lithium‐ion capacitors (LICs) with capacitor‐type cathodes and battery‐type anodes are considered a promising next‐generation advanced energy storages system that meet the requirements of high energy density and power density. However, the mismatch of charge‐storage capacity and electrode kinetics between positive and negative electrodes remains a challenge. Herein, layered SnS2/reduced graphene oxide (RGO) nanocomposites are developed for negative electrodes and a 2D B/N codoped carbon (BCN) nanosheet is designed for the positive electrode. The SnS2/RGO derived from SnS2‐bonded RGO of high conductivity exhibits a capacity of 1198 mA h g?1 at 100 mA g?1. Boron and nitrogen atoms in BCN are found to promote adsorption of anions, which enhance the pseudocapacitive contribution as well as expanding the voltage of LICs. A quantitative kinetics analysis indicates that the SnS2/RGO electrodes with a dominating capacitive mechanism and a diminished intercalation process, benefit the kinetic balance between the two electrodes. With this particular structure, the LIC is able to operate at the highest operating voltage for these devices recorded to date (4.5 V), exhibiting an energy density of 149.5 W h kg?1, a power density of 35 kW kg?1, and a capacity retention ratio of 90% after 10 000 cycles. 相似文献
2.
Xiang Hu Yangjie Liu Junxiang Chen Luocai Yi Hongbing Zhan Zhenhai Wen 《Liver Transplantation》2019,9(42)
Potassium‐ion hybrid capacitors (PIHCs) hold the advantages of high‐energy density of batteries and high‐power output of supercapacitors and thus present great promise for the next generation of electrochemical energy storage devices. One of the most crucial tasks for developing a high‐performance PIHCs is to explore a favorable anode material with capability to balance the kinetics mismatch between battery‐type anodes and capacitor‐type cathode. Herein, a reliable route for fabricating sulfur and nitrogen codoped 3D porous carbon nanosheets (S‐N‐PCNs) is reported. Systematic characterizations coupled with kinetics analysis indicate that the doped heteroatoms of sulfur and nitrogen and the amplified graphite interlayer can provide ample structural defects and redox active sites that are beneficial for improving pseudocapacitive activity, enabling fast kinetics toward efficient potassium‐ion storage. The S‐N‐PCNs are demonstrated to exhibit superior potassium storage capability with a high capacity of 107 mAh g?1 at 20 A g?1 and long cycle stability. The as‐developed PIHCs present impressive electrochemical performance with an operating voltage as high as 4.0 V, an energy density of 187 Wh kg?1, a power density of 5136 W kg?1, and a capacity retention of 86.4% after 3000 cycles. 相似文献
3.
The reliability and durability of lithium‐ion capacitors (LICs) are severely hindered by the kinetic imbalance between capacitive and Faradaic electrodes. Efficient charge storage in LICs is still a huge challenge, particularly for thick electrodes with high mass loading, fast charge delivery, and harsh working conditions. Here, a unique thermally durable, stable LIC with high energy density from all‐inorganic hydroxyapatite nanowire (HAP NW)‐enabled electrodes and separators is reported. Namely, the LIC device is designed and constructed with the electron/ion dual highly conductive and fire‐resistant composite Li4Ti5O12‐based anode and activated carbon‐based cathode, together with a thermal‐tolerant HAP NW separator. Despite the thick‐electrode configuration, the as‐fabricated all HAP NW‐enabled LIC exhibits much enhanced electrochemical kinetics and performance, especially at high current rates and temperatures. Long cycling lifetime and state‐of‐the‐art areal energy density (1.58 mWh cm?2) at a high mass loading of 30 mg cm?2 are achieved. Benefiting from the excellent fire resistance of HAP NWs, such an unusual LIC exhibits high thermal durability and can work over a wide range of temperatures from room temperature to 150 °C. Taking full advantage of synergistic configuration design, this work sets the stage for designing advanced LICs beyond the research of active materials. 相似文献
4.
Guangchao Li Zhoulan Yin Huajun Guo Zhixing Wang Guochun Yan Zhewei Yang Yong Liu Xiaobo Ji Jiexi Wang 《Liver Transplantation》2019,9(2)
Lithium‐ion hybrid supercapacitors (LICs) are considered as a promising candidate in energy storage systems. Taking the factor of sluggish kinetics behavior, battery‐type anode plays a significant role in improving the performance of LICs. Here, onion‐shaped graphene‐like derivatives are synthesized via carbonization of metalorganic quantum dots (MQDs) accompanied with in situ catalytic graphitization by reduced metal. Notably MQDs, exhibiting water‐soluble character and ultrafine particles (2.5–5.5 nm) morphology, are prepared by the amidation reaction. The carbonized sample exhibits highly graphitic tendency with graphitization degree up to 95.6%, and shows graphene‐like porous structure, appropriate amorphous carbon decoration characteristic, as well as N‐doping and defective nature. When employed as anode material in LICs, it shows high energy density of 83.7 Wh kg–1 and high power density of 6527 W kg–1 when the mass ratio of cathode to anode is 1:1 and the operating voltage ranges from 2.0 to 4.0 V. It also possesses the long cyclic stability with the energy density retention maintains at 97.3% after 10 000 cycles at 5.0 A g–1. In addition, the energy density is further increased by altering cathode/anode mass ratio and extending working voltage. This work provides a novel strategy to develop unique carbon materials for energy storage. 相似文献
5.
Jiafeng Ruan Fangjie Mo Ziliang Chen Miao Liu Shiyou Zheng Renbing Wu Fang Fang Yun Song Dalin Sun 《Liver Transplantation》2020,10(15)
Potassium‐ion hybrid capacitors (PIHCs), elaborately integrate the advantages of high output power as well as long lifespan of supercapacitors and the high energy density of batteries, and exhibit great possibilities for the future generations of energy storage devices. The critical next step for future implementation lies in exploring a high‐rate battery‐type anode with an ultra‐stable structure to match the capacitor‐type cathode. Herein, a “dual‐carbon” is constructed, in which a three‐dimensional nitrogen‐doped microporous carbon polyhedron (NMCP) derived from metal‐organic frameworks is tightly wrapped by two‐dimensional reduced graphene oxide (NMCP@rGO). Benefiting from the synergistic effect of the inner NMCP and outer rGO, the NMCP@rGO exhibits a superior K‐ion storage capability with a high reversible capacity of 386 mAh g?1 at 0.05 A g?1 and ultra‐long cycle stability with a capacity of 151.4 mAh g?1 after 6000 cycles at 5.0 A g?1. As expected, the as‐assembled PIHCs with a working voltage as high as 4.2 V present a high energy/power density (63.6 Wh kg?1 at 19 091 W kg?1) and excellent capacity retention of 84.7% after 12 000 cycles. This rational construction of advanced PIHCs with excellent performance opens a new avenue for further application and development. 相似文献
6.
Potassium ion hybrid capacitors have great potential for large‐scale energy devices, because of the high power density and low cost. However, their practical applications are hindered by their low energy density, as well as electrolyte decomposition and collector corrosion at high potential in potassium bis(fluoro‐sulfonyl)imide‐based electrolyte. Therefore, anode materials with high capacity, a suitable voltage platform, and stability become a key factor. Here, N‐doping carbon‐coated FeSe2 clusters are demonstrated as the anode material for a hybrid capacitor, delivering a reversible capacity of 295 mAh g?1 at 100 mA g?1 over 100 cycles and a high rate capability of 158 mAh g?1 at 2000 mA g?1 over 2000 cycles. Meanwhile, through density functional theory calculations, in situ X‐ray diffraction, and ex situ transmission electron microscopy, the evolution of FeSe2 to Fe3Se4 for the electrochemical reaction mechanism is successfully revealed. The battery‐supercapacitor hybrid using commercial activated carbon as the cathode and FeSe2/N‐C as the anode is obtained. It delivers a high energy density of 230 Wh kg?1 and a power density of 920 W kg?1 (the energy density and power density are calculated based on the total mass of active materials in the anode and cathode). 相似文献
7.
Jiangtao Chen Bingjun Yang Hongjun Hou Hongxia Li Li Liu Li Zhang Xingbin Yan 《Liver Transplantation》2019,9(19)
Potassium ion storage technology as a promising substitute for the well‐developed lithium ion storage technology is still at the infancy stage of development, and exploring suitable electrode materials is critical for its practical application. Here, the great feasibility of disordered, large interlayer spacing, and oxygen‐rich carbon nanosheets (CNSs) prepared by chemical vapor deposition for potassium ion storage applications is demonstrated. As an anode material, the CNSs exhibit outstanding rate capability as well as excellent cyclic stability. Taking advantage of this, a potassium ion hybrid capacitor (PIHC) is constructed by employing such CNSs as the battery‐type anode and activated carbon as the capacitor‐type cathode. The resulting device displays a high energy density of 149 Wh kg?1, an ultrahigh power output of 21 kW kg?1, as well as a long cycling life (80% capacity retention after 5000 cycles), which are all close to the state‐of‐the‐art values for PIHCs. This work promotes the development of high‐performance anode material for potassium ion storage devices, and the designed PIHC pushes the energy density and power density to a higher level. 相似文献
8.
An Ultrafast Rechargeable Hybrid Sodium‐Based Dual‐Ion Capacitor Based on Hard Carbon Cathodes
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Suhua Chen Jue Wang Ling Fan Ruifang Ma Erjing Zhang Qian Liu Bingan Lu 《Liver Transplantation》2018,8(18)
Hybrid sodium‐based dual‐ion capacitors (NDICs), which integrate the advantages of supercapacitors and sodium‐ion batteries, have attracted tremendous attention recently. In this work, hybrid sodium‐based dual‐ion capacitors are successfully developed with nitrogen‐doped microporous hard carbon as the cathode and soft carbon as the anode. N‐doping is beneficial to the functional groups, porous structure, and electric conductivity of hard carbon. Hybrid NDICs possess a wide voltage range (0.01–4.7 V), high‐energy density of 245.7 W h kg?1 at a power density of 1626 W kg?1, long cycle life (1000 cycles), and outstanding rate performance. 相似文献
9.
Yuan‐En Zhu Leping Yang Jian Sheng Yanan Chen Haichen Gu Jinping Wei Zhen Zhou 《Liver Transplantation》2017,7(22)
Na‐ion capacitors have attracted extensive interest due to the combination of the merits of high energy density of batteries and high power density as well as long cycle life of capacitors. Here, a novel Na‐ion capacitor, utilizing TiO2@CNT@C nanorods as an intercalation‐type anode and biomass‐derived carbon with high surface area as an ion adsorption cathode in an organic electrolyte, is reported. The advanced architecture of TiO2@CNT@C nanorods, prepared by electrospinning method, demonstrates excellent cyclic stability and outstanding rate capability in half cells. The contribution of extrinsic pseudocapacitance affects the rate capability to a large extent, which is identified by kinetics analysis. A key finding is that ion/electron transfer dynamics of TiO2@CNT@C could be effectively enhanced due to the addition of multiwalled carbon nanotubes. Also, the biomass‐derived carbon with high surface area displays high specific capacity and excellent rate capability. Owing to the merits of structures and excellent performances of both anode and cathode materials, the assembled Na‐ion capacitors provide an exceptionally high energy density (81.2 W h kg?1) and high power density (12 400 W kg?1) within 1.0–4.0 V. Meanwhile, the Na‐ion capacitors achieve 85.3% capacity retention after 5000 cycles tested at 1 A g?1. 相似文献
10.
Lithium Ion Capacitors in Organic Electrolyte System: Scientific Problems,Material Development,and Key Technologies
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Pengxian Han Gaojie Xu Xiaoqi Han Jingwen Zhao Xinhong Zhou Guanglei Cui 《Liver Transplantation》2018,8(26)
Lithium ion capacitors (LICs), which are hybrid electrochemical energy storage devices combining the intercalation/deintercalation mechanism of a lithium‐ion battery (LIB) electrode with the adsorption/desorption mechanism of an electric double‐layer capacitor (EDLC) electrode, have been extensively investigated during the past few years by virtue of their high energy density, rapid power output, and excellent cycleability. In this review, the LICs are defined as the devices with an electrochemical intercalation electrode and a capacitive electrode in organic electrolytes. Both electrodes can serve as anode or cathode. Throughout the history of LICs, tremendous efforts have been devoted to design suitable electrode materials or develop novel type LIC systems. However, one of the key challenges encountered by LICs is how to balance the sluggish kinetics of intercalation electrodes with high specific capacity against the high power characteristics of capacitive electrode with low specific capacitance. Herein, the developments and the latest advances of LIC in material design strategies and key techniques according to the basic scientific problems are summarized. Perspectives for further development of LICs toward practical applications are also proposed. 相似文献
11.
Zhuoxin Liu Qi Yang Donghong Wang Guojin Liang Youhuan Zhu Funian Mo Zhaodong Huang Xinliang Li Longtao Ma Tiancheng Tang Zhouguang Lu Chunyi Zhi 《Liver Transplantation》2019,9(46)
The migration of zinc‐ion batteries from alkaline electrolyte to neutral or mild acidic electrolyte promotes research into their flexible applications. However, discharge voltage of many reported zinc‐ion batteries is far from satisfactory. On one hand, the battery voltage is substantially restricted by the narrow voltage window of aqueous electrolytes. On the other hand, many batteries yield a low‐voltage discharge plateau or show no plateau but capacitor‐like sloping discharge profiles. This impacts the battery's practicability for flexible electronics where stable and consistent high energy is needed. Herein, an aqueous zinc hybrid battery based on a highly concentrated dual‐ion electrolyte and a hierarchically structured lithium‐ion‐intercalative LiVPO4F cathode is developed. This hybrid battery delivers a flat and high‐voltage discharge plateau of nearly 1.9 V, ranking among the highest reported values for all aqueous zinc‐based batteries. The resultant high energy density of 235.6 Wh kg?1 at a power density of 320.8 W kg?1 also outperforms most reported zinc‐based batteries. A designed solid‐state and long‐lasting hydrogel electrolyte is subsequently applied in the fabrication of a flexible battery, which can be integrated into various flexible devices as powerful energy supply. The idea of designing such a hybrid battery offers a new strategy for developing high‐voltage and high‐energy aqueous energy storage systems. 相似文献
12.
Chun‐Han Lai David S. Ashby Nicholas H. Bashian Jürgen Schoiber Ta‐Chung Liu Glenn S. Lee San‐Yuan Chen Pu‐Wei Wu Brent C. Melot Bruce S. Dunn 《Liver Transplantation》2019,9(18)
The growing demand for bioelectronics has generated widespread interest in implantable energy storage. These implantable bioelectronic devices, powered by a complementary battery/capacitor system, have faced difficulty in miniaturization without compromising their functionality. This paper reports on the development of a promising high‐rate cathode material for implantable power sources based on Li‐exchanged Na1.5VOPO4F0.5 anchored on reduced graphene oxide (LNVOPF‐rGO). LNVOPF is unique in that it offers dual charge storage mechanisms, which enable it to exhibit mixed battery/capacitor electrochemical behavior. In this work, electrochemical Li‐ion exchange of the LNVOPF structure is characterized by operando X‐ray diffraction. Through designed nanostructuring, the charge storage kinetics of LNVOPF are improved, as reflected in the stored capacity of 107 mAh g?1 at 20C. A practical full cell device composed of LNVOPF and T‐Nb2O5, which serves as a pseudocapacitive anode, is fabricated to demonstrate not only high energy/power density storage (100 Wh kg?1 at 4000 W kg?1) but also reliable pulse capability and biocompatibility, a desirable combination for applications in biostimulating devices. This work underscores the potential of miniaturizing biomedical devices by replacing a conventional battery/capacitor couple with a single power source. 相似文献
13.
Xingqi Chang Xiaolong Zhou Xuewu Ou Chun‐Sing Lee Jiwei Zhou Yongbing Tang 《Liver Transplantation》2019,9(47)
Potassium‐based energy storage devices (PESDs) are promising candidates for large‐scale energy storage applications owing to potassiums abundant in nature, the low standard redox potential (?2.93 V for K/K+ vs the standard hydrogen electrode) of potassium (K), and high ionic conductivity of K‐ion based electrolytes. However, lack of proper cathode and anode materials hinder practical applications of PESDs. In this work, carbon nanosheets doped with an ultrahigh content of nitrogen (22.7 at%) are successfully synthesized as an anode material for a K‐ion battery, which delivers a high capacity of 410 mAh g?1 at a current density of 500 mA g?1, which is the best result among the carbon based anodes for PESDs. Moreover, the battery exhibits an excellent cycling performance with a capacity retention of 70% after 3000 cycles at a high current density of 5 A g?1. In situ Raman, galvanostatic intermittent titration, and density functional theory calculations reveal that the ultrahigh N‐doped carbon nanosheet (UNCN) simultaneously combines the diffusion and pseudocapacitive mechanisms together, which remarkably improves its electrochemical performances in K‐ion storage. These results demonstrate the good potential of UNCNs as a high‐performance anode for PESDs. 相似文献
14.
ZnFe2O4‐C/LiFePO4‐CNT: A Novel High‐Power Lithium‐Ion Battery with Excellent Cycling Performance
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Alberto Varzi Dominic Bresser Jan von Zamory Franziska Müller Stefano Passerini 《Liver Transplantation》2014,4(10)
An innovative and environmentally friendly battery chemistry is proposed for high power applications. A carbon‐coated ZnFe2O4 nanoparticle‐based anode and a LiFePO4‐multiwalled carbon nanotube‐based cathode, both aqueous processed with Na‐carboxymethyl cellulose, are combined, for the first time, in a Li‐ion full cell with exceptional electrochemical performance. Such novel battery shows remarkable rate capabilities, delivering 50% of its nominal capacity at currents corresponding to ≈20C (with respect to the limiting cathode). Furthermore, the pre‐lithiation of the negative electrode offers the possibility of tuning the cell potential and, therefore, achieving remarkable gravimetric energy and power density values of 202 Wh kg?1 and 3.72 W kg?1, respectively, in addition to grant a lithium reservoir. The high reversibility of the system enables sustaining more than 10 000 cycles at elevated C‐rates (≈10C with respect to the LiFePO4 cathode), while retaining up to 85% of its initial capacity. 相似文献
15.
Mechanically bendable and flexible functionalities are urgently required for next‐generation battery systems that will be included in soft and wearable electronics, active sportswear, and origami‐based deployable space structures. However, it is very difficult to synthesize anode and cathode electrodes that have high energy density and structural reliability under large bending deformation. Here, vanadium oxide (V2O5) and nickel cobalt oxide (NiCo2O4) nanowire‐carbon fabric electrodes for highly flexible and bendable lithium ion batteries are reported. The vanadium oxide and nickel cobalt oxide nanowires were directly grown on plasma‐treated carbon fabric and were used as cathode and anode electrodes in a full cell lithium ion battery. Most importantly, a pre‐lithiation process was added to the nickel cobalt oxide nanowire anode to facilitate the construction of a full cell using symmetrically‐architectured nanowire‐carbon fabric electrodes. The highly bendable full cell based on poly(ethylene oxide) polymer electrolyte and room temperature ionic liquid shows high energy density of 364.2 Wh kg?1 at power density of 240 W kg?1, without significant performance degradation even under large bending deformations. These results show that vanadium oxide and lithiated nickel cobalt oxide nanowire‐carbon fabrics are a good combination for binder‐free electrodes in highly flexible lithium‐ion batteries. 相似文献
16.
Going Beyond Lithium Hybrid Capacitors: Proposing a New High‐Performing Sodium Hybrid Capacitor System for Next‐Generation Hybrid Vehicles Made with Bio‐Inspired Activated Carbon
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Ranjith Thangavel Karthikeyan Kaliyappan Kisuk Kang Xueliang Sun Yun‐Sung Lee 《Liver Transplantation》2016,6(7)
A novel sodium hybrid capacitor (NHC) is constructed with an intercalation‐type sodium material [carbon coated‐Na3V2(PO4)3, C‐NVP] and high surface area‐activated carbon derived from an eco‐friendly resource cinnamon sticks (CDCs) in an organic electrolyte. This novel NHC possesses a combination of high energy and high power density, along with remarkable electrochemical stability. In addition, the C‐NVP/CDC system outperforms present, well‐established lithium hybrid capacitor systems in all areas, and can thus be added to the list of candidates for future electric vehicles. A careful optimization of mass balance between electrode materials enables the C‐NVP/CDC cell to exhibit extraordinary capacitance performance. This novel NHC produces an energy density of 118 Wh kg?1 at a specific power of 95 W kg?1 and retains an energy density of 60 Wh kg?1 with high specific power of 850 W kg?1. Furthermore, a discharge capacitance of 53 F g?1 is obtained from the C‐NVP/CDC cell at a 1 mA cm?2 current density, along with 95% capacitance retention, even after 10 000 cycles. The sluggish kinetics of the Na ion battery system is successfully overcome by developing a stable, high‐performing NHC system. 相似文献
17.
Sodium‐ion batteries (SIBs) that operate in a wide temperature range are in high demand for practical large‐scale electric energy storage. Herein, a novel full SIB is composed of a bulk Bi anode, a Na3V2(PO4)3/carbon nanotubes composite (NVP‐CNTs) cathode and a NaPF6‐diglyme electrolyte. The Bi anode gradually evolves into a porous network in the ether‐based electrolyte during initial cycles, and in the NVP‐CNTs cathode the NVP is cross linked by CNTs to show large exchange current density. These unique features merit the full SIB of Bi//NVP‐CNTs with high Na+ diffusion coefficient and low reaction activation energy, and hence fast Na+ transport and facile redox reaction kinetics. The resultant full SIB presents high power density of 2354.6 W kg?1 and energy density of 150 Wh kg?1 and superior cycling stability in a wide temperature range from ?15 to 45 °C. This will shed light on battery design, and promote their development for practical applications in various weather conditions. 相似文献
18.
Siyu Yu Nianjun Yang Michael Vogel Soumen Mandal Oliver A. Williams Siyu Jiang Holger Schönherr Bing Yang Xin Jiang 《Liver Transplantation》2018,8(12)
To fabricate battery‐like supercapacitors with high power and energy densities, big capacitances, as well as long‐term capacitance retention, vertically aligned carbon nanofibers (CNFs) grown on boron doped diamond (BDD) films are employed as the capacitor electrodes. They possess large surface areas, high conductivity, high stability, and importantly are free of binder. The large surface areas result from their porous structures. The containment of graphene layers and copper metal catalysts inside CNFs leads to their high conductivity. Both electrical double layer capacitors (EDLCs) in inert solutions and pseudocapacitors (PCs) using Fe(CN)63?/4? redox‐active electrolytes are constructed with three‐ and two‐electrode systems. The assembled two‐electrode symmetrical supercapacitor devices exhibit capacitances of 30 and 48 mF cm?2 at 10 mV s?1 for EDLC and PC devices, respectively. They remain constant even after 10 000 charging/discharging cycles. The power densities are 27.3 and 25.3 kW kg?1 for EDLC and PC devices, together with their energy densities of 22.9 and 44.1 W h kg?1, respectively. The performance of these devices is superior to most of the reported supercapacitors and batteries. Vertically aligned CNF/BDD hybrid films are thus useful to construct high‐performance battery‐like and industry‐orientated supercapacitors for future power devices. 相似文献
19.
Flexible Quasi‐Solid‐State Sodium‐Ion Capacitors Developed Using 2D Metal–Organic‐Framework Array as Reactor
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Dongming Xu Dongliang Chao Huanwen Wang Yansheng Gong Rui Wang Beibei He Xianluo Hu Hong Jin Fan 《Liver Transplantation》2018,8(13)
Achieving high‐performance Na‐ion capacitors (NICs) has the particular challenge of matching both capacity and kinetics between the anode and cathode. Here a high‐power NIC full device constructed from 2D metal–organic framework (MOFs) array is reported as the reactive template. The MOF array is converted to N‐doped mesoporous carbon nanosheets (mp‐CNSs), which are then uniformly encapsulated with VO2 and Na3V2(PO4)3 (NVP) nanoparticles as the electroactive materials. By this method, the high‐power performance of the battery materials is enabled to be enhanced significantly. It is discovered that such hybrid NVP@mp‐CNSs array can render ultrahigh rate capability (up to 200 C, equivalent to discharge within 18 s) and superior cycle performance, which outperforms all NVP‐based Na‐ion battery cathodes reported so far. A quasi‐solid‐state flexible NIC based on the NVP@mp‐CNSs cathode and the VO2@mp‐CNSs anode is further assembled. This hybrid NIC device delivers both high energy density and power density as well as a good cycle stability (78% retention after 2000 cycles at 1 A g?1). The results demonstrate the powerfulness of MOF arrays as the reactor for fabricating electrode materials. 相似文献
20.
High Energy Density Sodium‐Ion Battery with Industrially Feasible and Air‐Stable O3‐Type Layered Oxide Cathode
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Jianqiu Deng Wen‐Bin Luo Xiao Lu Qingrong Yao Zhongmin Wang Hua‐Kun Liu Huaiying Zhou Shi‐Xue Dou 《Liver Transplantation》2018,8(5)
Extensive effort is being made into cathode materials for sodium‐ion battery to address several fatal issues, which restrict their future application in practical sodium‐ion full cell system, such as their unsatisfactory initial Coulombic efficiency, inherent deficiency of cyclable sodium content, and poor industrial feasibility. A novel air‐stable O3‐type Na[Li0.05Mn0.50Ni0.30Cu0.10Mg0.05]O2 is synthesized by a coprecipitation method suitable for mass production followed by high‐temperature annealing. The microscale secondary particle, consisting of numerous primary nanocrystals, can efficiently facilitate sodium‐ion transport due to the short diffusion distance, and this cathode material also has inherent advantages for practical application because of its superior physical properties. It exhibits a reversible capacity of 172 mA h g?1 at 0.1 C and remarkable capacity retention of 70.4% after 1000 cycles at 20 C. More importantly, it offers good compatibility with pristine hard carbon as anode in the sodium‐ion full cell system, delivering a high energy density of up to 215 W h kg?1 at 0.1 C and good rate performance. Owing to the high industrial feasibility of the synthesis process, good compatibility with pristine hard carbon anode, and excellent electrochemical performance, it can be considered as a promising active material to promote progress toward sodium‐ion battery commercialization. 相似文献