Ionogel Electrolytes for High‐Performance Lithium Batteries: A Review

Ionic liquids (ILs) are important electrolytes for applications in electrochemical devices. An emerging trend in ILs research is their hybridization with solid matrices, named ionogels. These ionogels can not only overcome the fluidity of ILs but also exhibit high mechanical strength of the solid matrix. Therefore, they show promise for applications in building lithium batteries. In this review, various types of solid matrices for confining ILs are summarized, including nonmetallic oxides, metal oxides, IL‐tethered nanoparticles, functionalized SiO₂, metal–organic frameworks, and other structural materials. The synthetic strategies for ionogels are first documented, focusing on physical confinement and covalent grafting. Then, the structure, ionic conductivity, thermal stability, and electrochemical stability of ionogels are addressed in detail. Furthermore, the authors highlight the potential applications of state‐of‐art ionogels in lithium batteries. The authors conclude this review by outlining the remaining challenges as well as personal perspectives on this hot area of research.     

Simultaneously Enhancing the Thermal Stability,Mechanical Modulus,and Electrochemical Performance of Solid Polymer Electrolytes by Incorporating 2D Sheets

Solid state electrolytes are the key components for high energy density lithium ion batteries and especially for lithium metal batteries where lithium dendrite growth is an inevitable obstacle in liquid electrolytes. Solid polymer electrolytes based on a complex of polymers and lithium salts are intrinsically advantageous over inorganic electrolytes in terms of processability and film‐forming properties. But other properties such as ionic conductivity, thermal stability, mechanical modulus, and electrochemical stability need to be improved. Herein, for the first time, 2D additives using few‐layer vermiculite clay sheets as an example to comprehensively upgrade poly(ethylene oxide)‐based solid polymer electrolyte are introduced. With clay sheet additives, the polymer electrolyte exhibits improved thermal stability, mechanical modulus, ionic conductivity, and electrochemical stability along with reduced flammability and interface resistance. The composite polymer electrolyte can suppress the formation and growth of lithium dendrites in lithium metal batteries. It is anticipated that the clay sheets upgraded solid polymer electrolyte can be integrated to construct high performance solid state lithium ion and lithium metal batteries with higher energy and safety.     

Lithium Fast‐Ionic Conduction in Complex Hydrides: Review and Prospects

Complex hydrides exhibit various energy‐related functions such as hydrogen storage, microwave absorption, and neutron shielding. Furthermore, another novel energy‐related function was recently reported by the authors; lithium fast‐ionic conduction, which suggests that complex hydrides may be a potential candidate for solid electrolytes in lithium‐ion batteries. This review presents the recent progress in the development of lithium fast‐ionic conductors of complex hydrides. First, the fast‐ionic conduction in LiBH₄ as a result of clarifying the mechanism of microwave absorption is presented, and then the conceptual development of complex hydrides as a new type of solid‐state lithium fast‐ionic conductors in LiBH₄–, LiNH₂–, and LiAlH₄‐based complex hydrides is discussed. Finally, the future prospects of this study from both application and fundamental viewpoints are described: possible use as solid electrolytes for batteries, formation of ionic liquids in complex hydrides, and similarity between complex hydrides and Laves‐phase metal hydrides.     

Regulating the Hidden Solvation‐Ion‐Exchange in Concentrated Electrolytes for Stable and Safe Lithium Metal Batteries

Lithium–sulfur batteries are attractive for automobile and grid applications due to their high theoretical energy density and the abundance of sulfur. Despite the significant progress in cathode development, lithium metal degradation and the polysulfide shuttle remain two critical challenges in the practical application of Li–S batteries. Development of advanced electrolytes has become a promising strategy to simultaneously suppress lithium dendrite formation and prevent polysulfide dissolution. Here, a new class of concentrated siloxane‐based electrolytes, demonstrating significantly improved performance over the widely investigated ether‐based electrolytes are reported in terms of stabilizing the sulfur cathode and Li metal anode as well as minimizing flammability. Through a combination of experimental and computational investigation, it is found that siloxane solvents can effectively regulate a hidden solvation‐ion‐exchange process in the concentrated electrolytes that results from the interactions between cations/anions (e.g., Li⁺, TFSI^?, and S^2?) and solvents. As a result, it could invoke a quasi‐solid‐solid lithiation and enable reversible Li plating/stripping and robust solid‐electrolyte interphase chemistries. The solvation‐ion‐exchange process in the concentrated electrolytes is a key factor in understanding and designing electrolytes for other high‐energy lithium metal batteries.     

Design Strategies,Practical Considerations,and New Solution Processes of Sulfide Solid Electrolytes for All‐Solid‐State Batteries

Owing to the ever‐increasing safety concerns about conventional lithium‐ion batteries, whose applications have expanded to include electric vehicles and grid‐scale energy storage, batteries with solidified electrolytes that utilize nonflammable inorganic materials are attracting considerable attention. In particular, owing to their superionic conductivities (as high as ≈10^?2 S cm^?1) and deformability, sulfide materials as the solid electrolytes (SEs) are considered the enabling material for high‐energy bulk‐type all‐solid‐state batteries. Herein the authors provide a brief review on recent progress in sulfide Li‐ and Na‐ion SEs for all‐solid‐state batteries. After the basic principles in designing SEs are considered, the experimental exploration of multicomponent systems and ab initio calculations that accelerate the search for stronger candidates are discussed. Next, other issues and challenges that are critical for practical applications, such as instability in air, electrochemical stability, and compatibility with active materials, are discussed. Then, an emerging progress in liquid‐phase synthesis and solution process of SEs and its relevant prospects in ensuring intimate ionic contacts and fabricating sheet‐type electrodes is highlighted. Finally, an outlook on the future research directions for all‐solid‐state batteries employing sulfide superionic conductors is provided.     

Improvements to the Overpotential of All‐Solid‐State Lithium‐Ion Batteries during the Past Ten Years

After the research that shows that Li₁₀GeP₂S₁₂ (LGPS)‐type sulfide solid electrolytes can reach the high ionic conductivity at the room temperature, sulfide solid electrolytes have been intensively developed with regard to ionic conductivity and mechanical properties. As a result, an increasing volume of research has been conducted to employ all‐solid‐state lithium batteries in electric automobiles within the next five years. To achieve this goal, it is important to review the research over the past decade, and understand the requirements for future research necessary to realize the practical applications of all‐solid‐state lithium batteries. To date, research on all‐solid‐state lithium batteries has focused on achieving overpotential properties similar to those of conventional liquid‐lithium‐ion batteries by increasing the ionic conductivity of the solid electrolytes. However, the increase in the ionic conductivity should be accompanied by improvements of the electronic conductivity within the electrode to enable practical applications. This essay provides a critical overview of the recent progress and future research directions of the all‐solid‐state lithium batteries for practical applications.     

Tailored Reaction Route by Micropore Confinement for Li–S Batteries Operating under Lean Electrolyte Conditions

Lithium‐sulfur (Li–S) batteries are one of the most promising alternative energy storage systems beyond Li‐ion batteries. However, the sluggish kinetics of the nucleation and growth of the solid discharge product of Li₂S/Li₂S₂ in the lower discharge plateau has been recently identified as a critical hurdle for attaining high specific capacity in Li–S batteries with high sulfur loadings under lean electrolyte conditions. Herein, a new strategy of breaking the charge‐transport bottleneck by successful generation of experimentally verified stable Li₂S₂ and a reservoir of quasi‐solid lithium polysulfides within the micropores of activated carbon fiber cloth as a high‐sulfur‐loading host is proposed. The developed Li–S cell is capable of delivering a highly sustainable areal capacity of 6.0 mAh cm^?2 under lower electrolyte to sulfur ratios (<3.0 mL_E g_S^?1). Micropore confinement leads to generation of solid Li₂S₂ that enables high utilization of the entire electroactive area by its inherent self‐healing capacity. This strategy opens a new avenue for rational material designs for Li–S batteries under lean electrolyte condition.     

Recent Advances in Rechargeable Magnesium‐Based Batteries for High‐Efficiency Energy Storage

Benefiting from higher volumetric capacity, environmental friendliness and metallic dendrite‐free magnesium (Mg) anodes, rechargeable magnesium batteries (RMBs) are of great importance to the development of energy storage technology beyond lithium‐ion batteries (LIBs). However, their practical applications are still limited by the absence of suitable electrode materials, the sluggish kinetics of Mg²⁺ insertion/extraction and incompatibilities between electrodes and electrolytes. Herein, a systematic and insightful review of recent advances in RMBs, including intercalation‐based cathode materials and conversion reaction‐based compounds is presented. The relationship between microstructures with their electrochemical performances is comprehensively elucidated. In particular, anode materials are discussed beyond metallic Mg for RMBs. Furthermore, other Mg‐based battery systems are also summarized, including Mg–air batteries, Mg–sulfur batteries, and Mg–iodine batteries. This review provides a comprehensive understanding of Mg‐based energy storage technology and could offer new strategies for designing high‐performance rechargeable magnesium batteries.     

Ethers Illume Sodium‐Based Battery Chemistry: Uniqueness,Surprise, and Challenges

Sodium‐ion batteries (SIBs) have the potential to be practically applied in large‐scale energy storage markets. The rapid progress of SIBs research is primarily focused on electrodes, while electrolytes attract less attention. Indeed, the improvement of electrode performance is arguably correlated with the electrolyte optimization. In conventional lithium‐ion batteries (LIBs), ether‐based electrolytes are historically less practical owing to the insufficient passivation of both anodes and cathodes. As an important class of aprotic electrolytes, ethers have revived with the emerging lithium‐sulfur and lithium‐oxygen batteries in recent years, and are even booming in the wave of SIBs. Ether‐based electrolytes are unique to enabling these new battery chemistries in terms of producing stable ternary graphite intercalation compounds, modifying anode solid electrolyte interphases, reducing the solubility of intermediates, and decreasing polarization. Better still, ether‐based electrolytes are compatible with specific inorganic cathodes and could catalyze the assembly of full SIBs prototypes. This Research News article aims to summarize the recent critical reports on ether‐based electrolytes in sodium‐based batteries, to unveil the uniqueness of ether‐based electrolytes to advancing diverse electrode materials, and to shed light on the viability and challenges of ether‐based electrolytes in future sodium‐based battery chemistries.     

Recent Developments and Understanding of Novel Mixed Transition‐Metal Oxides as Anodes in Lithium Ion Batteries

Mixed transition‐metal oxides (MTMOs), including stannates, ferrites, cobaltates, and nickelates, have attracted increased attention in the application of high performance lithium‐ion batteries. Compared with traditional metal oxides, MTMOs exhibit enormous potential as electrode materials in lithium‐ion batteries originating from higher reversible capacity, better structural stability, and high electronic conductivity. Recent advancements in the rational design of novel MTMO micro/nanostructures for lithium‐ion battery anodes are summarized and their energy storage mechanism is compared to transition‐metal oxide anodes. In particular, the significant effects of the MTMO morphology, micro/nanostructure, and crystallinity on battery performance are highlighted. Furthermore, the future trends and prospects, as well as potential problems, are presented to further develop advanced MTMO anodes for more promising and large‐scale commercial applications of lithium‐ion batteries.     

Recent Progress in High Donor Electrolytes for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries continue to be considered promising post‐lithium‐ion batteries owing to their high theoretical energy density. In pursuit of a Li–S cell with long‐term cyclability, most studies thus far have relied on using ether‐based electrolytes. However, their limited ability to dissolve polysulfides requires a high electrolyte‐to‐sulfur ratio, which impairs the achievable specific energy. Recently, the battery community found high donor electrolytes to be a potential solution to this shortcoming because their high solubility toward polysulfides enables a cell to operate under lean electrolyte conditions. Despite the increasing number of promising outcomes with high donor electrolytes, a critical hurdle related to stability of the lithium‐metal counter electrode needs to be overcome. This review provides an overview of recent efforts pertaining to high donor electrolytes in Li–S batteries and is intended to raise interest from within the community. Furthermore, based on analogous efforts in the lithium‐air battery field, strategies for protecting the lithium metal electrode are proposed. It is predicted that high donor electrolytes will be elevated to a higher status in the field of Li–S batteries, with the hope that either existing or upcoming strategies will, to a fair extent, mitigate the degradation of the lithium–metal interface.     

Improved Electrochemical Performance of Na‐Ion Batteries in Ether‐Based Electrolytes: A Case Study of ZnS Nanospheres

Sodium‐ion batteries are considered as a promising technology for large‐scale energy storage applications, owing to their low cost. However, there are many challenges for developing sodium‐ion batteries with high capacity, long cycle life, and high‐rate capability. Herein, the development of high‐performance sodium‐ion batteries using ZnS nanospheres as anode material and an ether‐based electrolyte, which exhibit improved electrochemical performance over the pure alkyl carbonate electrolytes, is reported. ZnS nanospheres deliver a high specific capacity of 1000 mA h g^?1 and high initial Columbic efficiency of 90%. Electrochemical testing and first‐principle calculations demonstrate that the ether‐based solvent can facilitate charge transport, reduce the energy barrier for sodium‐ion diffusion, and thus enhance electrochemical performances. Ex situ measurements (X‐ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) mapping) reveal that ZnS nanospheres maintain structural integrity during the charge and discharge processes over 100 cycles. As anode material for sodium‐ion batteries, ZnS nanospheres deliver high reversible sodium storage capacity, high Coulombic efficiencies, and extended cycle life.     

Sulfide Solid Electrolytes for Lithium Battery Applications

The use of solid electrolytes is a promising direction to improve the energy density of lithium‐ion batteries. However, the low ionic conductivity of many solid electrolytes currently hinders the performance of solid‐state batteries. Sulfide solid electrolytes can be processed in a number of forms (glass, glass‐ceramic, and crystalline) and have a wide range of available chemistries. Crystalline sulfide materials demonstrate ionic conductivity on par with those of liquid electrolytes through the utilization of near ideal conduction pathways. Low‐temperature processing is also possible for these materials due to their favorable mechanical properties. The main drawback of sulfide solid electrolytes remains their electrochemical stability, but this can be addressed through compositional tuning or the use of artificial solid electrolyte interphase (SEI). Implementation of sulfide solid electrolytes, with proper treatment for stability, can lead to substantial improvements in solid‐state battery performance leading to significant advancement in electric vehicle technology.     

Hierarchical Structures Based on Two‐Dimensional Nanomaterials for Rechargeable Lithium Batteries

Two‐dimensional (2D) nanomaterials (i.e., graphene and its derivatives, transition metal oxides and transition metal dichalcogenides) are receiving a lot attention in energy storage application because of their unprecedented properties and great diversities. However, their re‐stacking or aggregation during the electrode fabrication process has greatly hindered their further developments and applications in rechargeable lithium batteries. Recently, rationally designed hierarchical structures based on 2D nanomaterials have emerged as promising candidates in rechargeable lithium battery applications. Numerous synthetic strategies have been developed to obtain hierarchical structures and high‐performance energy storage devices based on these hierarchical structure have been realized. This review summarizes the synthesis and characteristics of three styles of hierarchical architecture, namely three‐dimensional (3D) porous network nanostructures, hollow nanostructures and self‐supported nanoarrays, presents the representative applications of hierarchical structured nanomaterials as functional materials for lithium ion batteries, lithium‐sulfur batteries and lithium‐oxygen batteries, meanwhile sheds light particularly on the relationship between structure engineering and improved electrochemical performance; and provides the existing challenges and the perspectives for this fast emerging field.     

All‐Solid‐State Printed Bipolar Li–S Batteries

Despite their potential advantages over currently widespread lithium‐ion batteries, lithium–sulfur (Li–S) batteries are not yet in practical use. Here, for the first time bipolar all‐solid‐state Li–S batteries (ASSLSBs) are demonstrated that exhibit exceptional safety, flexibility, and aesthetics. The bipolar ASSLSBs are fabricated through a solvent‐drying‐free, ultraviolet curing‐assisted stepwise printing process at ambient conditions, without (high‐temperature/high‐pressure) sintering steps that are required for inorganic electrolyte‐based all‐solid‐state batteries. Two thermodynamically immiscible and nonflammable gel electrolytes based on ethyl methyl sulfone (EMS) and tetraethylene glycol dimethyl ether (TEGDME) are used to address longstanding concerns regarding the grain boundary resistance of conventional inorganic solid electrolytes, as well as the polysulfide shuttle effect in Li–S batteries. The EMS gel electrolytes embedded in the sulfur cathodes facilitate sulfur utilization, while the TEGDME gel composite electrolytes serve as polysulfide‐repelling separator membranes. Benefiting from the well‐designed cell components and printing‐driven facile processability, the resulting bipolar ASSLSBs exhibit unforeseen advancements in bipolar cell configuration, safety, foldability, and form factors, which lie far beyond those achievable with conventional Li–S battery technologies.     

Exploiting Lithium‐Depleted Cathode Materials for Solid‐State Li Metal Batteries

Solid‐state lithium metal batteries (SSLMBs) may become one of the high‐energy density storage devices for the next generation of electric vehicles. High safety and energy density can be achieved by utilizing solid electrolytes and Li metal anodes. Therefore, developing cathode materials which can match with Li metal anode efficiently is indispensable. In SSLMBs, Li metal anodes can afford the majority of active lithium ions, then lithium‐depleted cathode materials can be a competitive candidate to achieve high gravimetric energy density as well as save lithium resources. Li_0.33MnO₂ lithium‐depleted material is chosen, which also has the advantages of low synthesis temperature and low cost (cobalt‐free). Notably, solid‐state electrolyte can greatly alleviate the problem of manganese dissolution in the electrolyte, which is beneficial to improve the cycling stability of the battery. Thus, SSLMBs enable practical applications of lithium‐depleted cathode materials.     

Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries

Secondary batteries based on metal anodes (e.g., Li, Na, Mg, Zn, and Al) are among the most sought‐after candidates for next‐generation mobile and stationary storage systems because they are able to store a larger amount of energy per unit mass or volume. However, unstable electrodeposition and uncontrolled interfacial reactions occuring in liquid electrolytes cause unsatisfying cell performance and potential safety concerns for the commercial application of these metal anodes. Solid‐state electrolytes (SSEs) having a higher modulus are considered capable of inhibiting difficulties associated with the anodes and may enable building of safe all‐solid‐state metal batteries, yet several challenges, such as insufficient room‐temperature ionic conductivity and poor interfacial stability between the electrode and the electrolyte, hinder the large‐scale development of such batteries. Here, research and development of SSEs including inorganic ceramics, organic solid polymers, and organic–inorganic hybrid/composite materials for metal‐based batteries are reviewed. The comparison of different types of electrolytes is discussed in detail, in the context of electrochemical energy storage applications. Then, the focus of this study is on recent advances in a range of attractive and innovative battery chemistries and technologies that are enabled by SSEs. Finally, the challenges and future perspectives are outlined to foresee the development of SSEs.     

Ameliorating the Interfacial Problems of Cathode and Solid‐State Electrolytes by Interface Modification of Functional Polymers

Solid‐state Li secondary batteries may become high energy density storage devices for the next generation of electric vehicles, depending on the compatibility of electrode materials and suitable solid electrolytes. Specifically, it is a great challenge to obtain a stable interface between these solid electrolytes and cathodes. Herein, this issue can be effectively addressed by constructing a poly(acrylonitrile‐co‐butadiene) coated layer onto the surface of LiNi_0.6Mn_0.2Co_0.2O₂ cathode materials. The polymer layer plays a vital role in working as a protective shell to retard side reaction and ameliorate the contact of the solid–solid interface during the cycling process. In the resultant solid‐state batteries, both rate capacity (99 mA h g^?1 at 3 C) and cycling stability (75% capacity retention after 400 cycles) are improved after coating. This impressive performance highlights the great importance of layer modification in the cathode and inspires the development of solid‐state batteries toward practical applications.     

A Material Perspective of Rechargeable Metallic Lithium Anodes

Rechargeable lithium‐based batteries are long considered as the most promising candidates for application in various electronic devices, electric vehicles, and even electrical grids owing to their ultrahigh energy densities. However, to date, metallic lithium‐based batteries are still far from practical applications due to the low Coulombic efficiency and fast capacity decay of lithium anodes. The poor electrochemical performances of metallic lithium anodes are inherently related to random growth of lithium dendrites and infinite volume charge of lithium anodes. In this review, the failure mechanisms of metallic lithium anodes are summarized and ascribed to the unstable and inhomogeneous solid electrolyte interphase, uneven distributions of electric field, and lithium‐ion flux during the lithium plating processes. Correspondingly, efficient strategies for mitigating these problems, including surficial engineering, electric field, and lithium‐ion flux regulation are discussed from the perspective of anode materials. Finally, an outlook is proposed for the design and fabrication of next‐generation rechargeable metallic lithium anodes that aims to address the intrinsic problems of metallic lithium anodes.     

Stack Pressure Considerations for Room‐Temperature All‐Solid‐State Lithium Metal Batteries

All‐solid‐state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendrit growth at room temperature. While cell parameters such as current density, electrolyte porosity, and interfacial properties have been investigated, mechanical properties of lithium metal and the role of applied stack pressure on the shorting behavior are still poorly understood. Here, failure mechanisms of lithium metal are investigated in all‐solid‐state batteries as a function of stack pressure, and in situ characterization of the interfacial and morphological properties of the buried lithium is conducted in solid electrolytes. It is found that a low stack pressure of 5 MPa allows reliable plating and stripping in a lithium symmetric cell for more than 1000 h, and a Li | Li₆PS₅Cl | LiNi_0.80Co_0.15Al_0.05O₂ full cell, plating more than 4 µm of lithium per charge, is able to cycle over 200 cycles at room temperature. These results suggest the possibility of enabling the lithium metal anode in all‐solid‐state batteries at reasonable stack pressures.