Pt‐Ir‐Pd Trimetallic Nanocages as a Dual Catalyst for Efficient Oxygen Reduction and Evolution Reactions in Acidic Media

The development of dual catalysts with high efficiency toward oxygen reduction and evolution reactions (ORR and OER) in acidic media is a significant challenge. Here an active and durable dual catalyst based upon cubic Pt₃₉Ir₁₀Pd₁₁ nanocages with an average edge length of 12.3 nm, porous walls as thin as 1.0 nm, and well‐defined {100} facets is reported. The trimetallic nanocages perform better than all the reported dual catalysts in acidic media, with a low ORR‐OER overpotential gap of only 704 mV at a Pt‐Ir‐Pd loading of 16.8 µg_Pt+Ir+Pd cm^?2_geo. For ORR at 0.9 V, when benchmarked against the commercial Pt/C and Pt‐Pd nanocages, the trimetallic nanocages exhibit an enhanced mass activity of 0.52 A mg^?1_Pt+Ir+Pd (about four and two times as high as those of the Pt/C and Pt‐Pd nanocages) and much improved durability. For OER, the trimetallic nanocages show a remarkable mass activity of 0.20 A mg^?1_Pt+Ir at 1.53 V, which is 16.7 and 4.3 fold relative to those of the Pt/C and Pt‐Pd nanocages, respectively. These improvements can be ascribed to the highly open structure of the nanocages, and the possible electronic coupling between Ir and Pt atoms in the lattice.     

MOF Template‐Directed Fabrication of Hierarchically Structured Electrocatalysts for Efficient Oxygen Evolution Reaction

The ever‐increasing demand for clean and renewable power sources has sparked intensive research on water splitting to produce hydrogen, in which the exploration of electrocatalysts is the central issue. Herein, a new strategy, metal–organic framework template‐directed fabrication of hierarchically structured Co₃O₄@X (X = Co₃O₄, CoS, C, and CoP) electrocatalysts for efficient oxygen evolution reaction (OER) is developed, where Co₃O₄@X are derived from cobalt carbonatehydroxide@zeolitic‐imidazolate‐framework‐67 (CCH@ZIF‐67). Unique hierarchical structure and synergistic effect of resulting catalysts endow abundant exposed active sites, facile ion diffusion path, and improved conductivity, being favorable for improving catalytic activity of them. Consequently, these derivatives Co₃O₄@X reveal highly efficient electrocatalytic performance with long‐term durability for the OER, much superior to previously reported cobalt‐based catalysts as well as the Ir/C catalyst. Particularly, Co₃O₄@CoP exhibits the highest electrocatalytic capability with the lower overpotential of 238 mV at the current density of 10 mA cm^?2. Furthermore, Co₃O₄@X can also efficiently catalyze other small molecules through electro‐oxidation reaction (e.g., glycerol, methanol, or ethanol). It is expected that the strategy presented here can be extended to the fabrication of other composite electrode materials with hierarchical structures for more efficient water splitting.     

Recent Progress on Multimetal Oxide Catalysts for the Oxygen Evolution Reaction

Hydrogen is a promising alternative fuel for efficient energy production and storage, with water splitting considered one of the most clean, environmentally friendly, and sustainable approaches to generate hydrogen. However, to meet industrial demands with electrolysis‐generated hydrogen, the development of a low‐cost and efficient catalyst for the oxygen evolution reaction (OER) is critical, while conventional catalysts are mostly based on precious metals. Many studies have thus focused on exploring new efficient nonprecious‐metal catalytic systems and improving the understandings on the OER mechanism, resulting in the design of catalysts with superior activity compared with that of conventional catalysts. In particular, the use of multimetal rather than single‐metal catalysts is demonstrated to yield remarkable performance improvement, as the metal composition in these catalysts can be tailored to modify the intrinsic properties affecting the OER. Herein, recent progress and accomplishments of multimetal catalytic systems, including several important groups of catalysts: layered hydroxide, spinel, and amorphous metal oxides along with the theoretical principles of activity enhancement in multimetal systems are reviewed. Finally, this is concluded by discussing remaining challenges to achieve further improvements of OER catalyst activities.     

Enhanced Stability and Thickness‐Independent Oxygen Evolution Electrocatalysis of Heterostructured Anodes with Buried Epitaxial Bilayers

Achieving high oxygen evolution reaction (OER) activity while maintaining performance stability is a key challenge for designing perovskite structure oxide OER catalysts, which are often unstable in alkaline environments transforming into an amorphous phase. While the chemical and structural transformation occurring during electrolysis at the electrolyte–catalyst interface is now regarded as a crucial factor influencing OER activity, here, using La_0.7Sr_0.3CoO_3?δ (LSCO) as an active OER catalyst, the critical influence of buried layers on the oxidation current stability in nanoscopically thin, chemically and structurally evolving, catalyst layers is revealed. The use of epitaxial thin films is demonstrated to engineer both depletion layer widths and chemical stability of the catalyst support structure resulting in heterostructured anodes that maintain facile transport kinetics across the electrolyte–anode interface for atomically thin (2–3 unit cells) LSCO catalyst layers and greatly enhanced oxidation current stability as the perovskite structure OER catalysts chemically and structurally transform. This work opens up an approach to design robust and active heterostructured anodes with dynamically evolving ultrathin OER electrocatalyst layers for future green fuel technologies such as conformal coatings of high‐density 3D anode topologies for water splitting.     

Ultrathin High Surface Area Nickel Boride (NixB) Nanosheets as Highly Efficient Electrocatalyst for Oxygen Evolution

The overriding obstacle to mass production of hydrogen from water as the premium fuel for powering our planet is the frustratingly slow kinetics of the oxygen evolution reaction (OER). Additionally, inadequate understanding of the key barriers of the OER is a hindrance to insightful design of advanced OER catalysts. This study presents ultrathin amorphous high‐surface area nickel boride (Ni_x B) nanosheets as a low‐cost, very efficient and stable catalyst for the OER for electrochemical water splitting. The catalyst affords 10 mA cm^?2 at 0.38 V overpotential during OER in 1.0 m KOH, reducing to only 0.28 V at 20 mA cm^?2 when supported on nickel foam, which ranks it among the best reported nonprecious catalysts for oxygen evolution. Operando X‐ray absorption fine‐structure spectroscopy measurements reveal prevalence of NiOOH, as well as Ni‐B under OER conditions, owing to a Ni‐B core@nickel oxyhydroxide shell (Ni‐B@NiO_x H) structure, and increase in disorder of the NiO_x H layer, thus revealing important insight into the transient states of the catalyst during oxygen evolution.     

Hierarchical Polyelemental Nanoparticles as Bifunctional Catalysts for Oxygen Evolution and Reduction Reactions

Efficient electrocatalysts are critical in various clean energy conversion and storage systems. Polyelemental nanomaterials are attractive as multifunctional catalysts due to their wide compositions and synergistic properties. However, controlled synthesis of polyelemental nanomaterials is difficult due to their complex composition. Herein, a one‐step synthetic strategy is presented to fabricate a hierarchical polyelemental nanomaterial, which contains ultrasmall precious metal nanoparticles (IrPt, ≈5 nm) anchored on spinel‐structure transition metal oxide nanoparticles. The polyelemental nanoparticles serve as excellent bifunctional catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The mass catalytic activity of the polyelemental nanoparticles is 7‐times higher than that of Pt in ORR and 28‐times that of Ir in OER at the same overpotentials, demonstrating the high activity of the bifunctional electrocatalyst. This outstanding performance is attributed to the controlled multiple elemental composition, mixed chemical states, and large electroactive surface area. The hierarchical nanostructure and polyelemental design of these nanoparticles offer a general and powerful alternative material for catalysis, solar cells, and more.     

Highly Active Trimetallic NiFeCr Layered Double Hydroxide Electrocatalysts for Oxygen Evolution Reaction

The development of efficient and robust earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is an ongoing challenge. Here, a novel and stable trimetallic NiFeCr layered double hydroxide (LDH) electrocatalyst for improving OER kinetics is rationally designed and synthesized. Electrochemical testing of a series of trimetallic NiFeCr LDH materials at similar catalyst loading and electrochemical surface area shows that the molar ratio Ni:Fe:Cr = 6:2:1 exhibits the best intrinsic OER catalytic activity compared to other NiFeCr LDH compositions. Furthermore, these nanostructures are directly grown on conductive carbon paper for a high surface area 3D electrode that can achieve a catalytic current density of 25 mA cm^?2 at an overpotential as low as 225 mV and a small Tafel slope of 69 mV dec^?1 in alkaline electrolyte. The optimized NiFeCr catalyst is stable under OER conditions and X‐ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy, and elemental analysis confirm the stability of trimetallic NiFeCr LDH after electrochemical testing. Due to the synergistic interactions among the metal centers, trimetallic NiFeCr LDH is significantly more active than NiFe LDH and among the most active OER catalysts to date. This work also presents general strategies to design more efficient metal oxide/hydroxide OER electrocatalysts.     

Fe?N4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN₄/NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN₄/NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm^?2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular Fe? N₄ species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the Fe? N₄–doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.     

FeN4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN₄/NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN₄/NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm^?2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular Fe?N₄ species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the Fe?N₄–doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.     

Active MnOx Electrocatalysts Prepared by Atomic Layer Deposition for Oxygen Evolution and Oxygen Reduction Reactions

The ability to deposit conformal catalytic thin films enables opportunities to achieve complex nanostructured designs for catalysis. Atomic layer deposition (ALD) is capable of creating conformal thin films over complex substrates. Here, ALD‐MnO_x on glassy carbon is investigated as a catalyst for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR), two reactions that are of growing interest due to their many applications in alternative energy technologies. The films are characterized by X‐ray photoelectron spectroscopy, X‐ray diffraction, scanning electron microscopy, ellipsometry, and cyclic voltammetry. The as‐deposited films consist of Mn(II)O, which is shown to be a poor catalyst for the ORR, but highly active for the OER. By controllably annealing the samples, Mn₂O₃ catalysts with good activity for both the ORR and OER are synthesized. Hypotheses are presented to explain the large difference in the activity between the MnO and Mn₂O₃ catalysts for the ORR, but similar activity for the OER, including the effects of surface oxidation under experimental conditions. These catalysts synthesized though ALD compare favorably to the best MnO_x catalysts in the literature, demonstrating a viable way to produce highly active, conformal thin films from earth‐abundant materials for the ORR and the OER.     

Zn0.35Co0.65O – A Stable and Highly Active Oxygen Evolution Catalyst Formed by Zinc Leaching and Tetrahedral Coordinated Cobalt in Wurtzite Structure

To arrive to sustainable hydrogen‐based energy solutions, the understanding of water‐splitting catalysts plays the most crucial role. Herein, state‐of‐the‐art hypotheses are combined on electrocatalytic active metal sites toward the oxygen evolution reaction (OER) to develop a highly efficient catalyst based on Earth‐abundant cobalt and zinc oxides. The precursor catalyst Zn_0.35Co_0.65O is synthesized via a fast microwave‐assisted approach at low temperatures. Subsequently, it transforms in situ from the wurtzite structure to the layered γ‐Co(O)OH, while most of its zinc leaches out. This material shows outstanding catalytic performance and stability toward the OER in 1 m KOH (overpotential at 10 mA cm^?2 η_initial = 306 mV, η_{98 h} = 318 mV). By comparing the electrochemical results and ex situ analyses to today's literature, clear structure‐activity correlations are able to be identified. The findings suggest that coordinately unsaturated cobalt octahedra on the surface are indeed the active centers for the OER.     

Highly Active and Stable Graphene Tubes Decorated with FeCoNi Alloy Nanoparticles via a Template‐Free Graphitization for Bifunctional Oxygen Reduction and Evolution

Development of highly active and stable bifunctional oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalysts from earth‐abundant elements remains a grand challenge for highly demanded reversible fuel cells and metal–air batteries. Carbon catalysts have many advantages over others due to their low cost, excellent electrical conductivity, high surface area, and easy functionalization. However, they typically cannot withstand the highly oxidative OER environment. Here, a new class of bifunctional electrocatalyst is reported, consisting of ultralarge sized nitrogen doped graphene tubes (N‐GTs) (>500 nm) decorated with FeCoNi alloy particles. These tubes are prepared from an inexpensive precursor, dicyandiamide, via a template‐free graphitization process. The ORR/OER activity and the stability of these graphene tube catalysts depend strongly on the transition metal precursors. The best performing FeCoNi‐derived N‐GT catalyst exhibits excellent ORR and OER activity along with adequate electrochemical durability over a wide potential window (0–1.9 V) in alkaline media. The measured OER current is solely due to desirable O₂ evolution, rather than carbon oxidation. Extensive electrochemical and physical characterization indicated that high graphitization degree, thicker tube walls, proper nitrogen doping, and presence of FeCoNi alloy particles are vital for high bifunctional activity and electrochemical durability of tubular carbon catalysts.     

Single Ru Atoms Stabilized by Hybrid Amorphous/Crystalline FeCoNi Layered Double Hydroxide for Ultraefficient Oxygen Evolution

In view of the sluggish kinetics suppressing the oxygen evolution reaction (OER), developing efficient and robust OER catalysts is urgent and essential for developing efficient energy conversion technologies. Herein, hybrid amorphous/crystalline FeCoNi layered double hydroxide (LDH)-supported single Ru atoms (Ru SAs/AC-FeCoNi) are developed for enabling a highly efficient electrocatalytic OER. The amorphous outer layer in Ru SAs/AC-FeCoNi is composed of abundant defect sites and unsaturated coordination sites, which can serve as anchoring sites to stabilize single Ru atoms. The crystalline inner has a highly symmetric rigid structure, thereby strengthening the stability of support for a long-lasting OER. The synergistic effects endow this hybrid catalyst with extremely low overpotential (205 mV at 10 mA cm⁻²). Density functional theory calculation indicates that single Ru atoms stabilized by hybrid amorphous/crystalline FeCoNi LDH facilitate the formation of Ru–O* (rate-determining step), thus accelerating the OER process.     

Single Atoms and Clusters Based Nanomaterials for Hydrogen Evolution,Oxygen Evolution Reactions,and Full Water Splitting

The sustainable and scalable production of hydrogen through hydrogen evolution reaction (HER) and oxygen through oxygen evolution reaction (OER) in water splitting demands efficient and robust electrocatalysts. Currently, state‐of‐the‐art electrocatalysts of Pt and IrO₂/RuO₂ exhibit the benchmark catalytic activity toward HER and OER, respectively. However, expanding their practical application is hindered by their exorbitant price and scarcity. Therefore, the development of alternative effective electrocatalysts for water splitting is crucial. In the last few decades, substantial effort has been devoted to the development of alternative HER/OER and water splitting catalysts based on various transition metals (including Fe, Co, Ni, Mo, and atomic Pt) which show promising catalytic activities and durability. In this review, after a brief introduction and basic mechanism of HER/OER, the authors systematically discuss the recent progress in design, synthesis, and application of single atom and cluster‐based HER/OER and water splitting catalysts. Moreover, the crucial factors that can tune the activity of catalysts toward HER/OER and water splitting such as morphology, crystal defects, hybridization of metals with nonmetals, heteroatom doping, alloying, and formation of metals inside graphitic layered materials are discussed. Finally, the existing challenges and future perspectives for improving the performance of electrocatalysts for water splitting are addressed.     

Ultralow Ru Loading Transition Metal Phosphides as High‐Efficient Bifunctional Electrocatalyst for a Solar‐to‐Hydrogen Generation System

Water splitting is a promising technology for sustainable conversion of hydrogen energy. The rational design of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) bifunctional electrocatalysts with superior activity and stability in the same electrolyte is the key to promoting their large‐scale applications. Herein, an ultralow Ru (1.08 wt%) transition metal phosphide on nickel foam (Ru–MnFeP/NF) derived from Prussian blue analogue, that effectively drivies both the OER and the HER in 1 m KOH, is reported. To reach 20 mA cm^?2 for OER and 10 mA cm^?2 for HER, the Ru–MnFeP/NF electrode only requires overpotentials of 191 and 35 mV, respectively. Such high electrocatalytic activity exceeds most transition metal phosphides for the OER and the HER, and even reaches Pt‐like HER electrocatalytic levels. Accordingly, it significantly accelerates full water splitting at 10 mA cm^?2 with 1.470 V, which outperforms that of the integrated RuO₂ and Pt/C couple electrode (1.560 V). In addition, the extremely long operational stability (50 h) and the successful demonstration of a solar‐to‐hydrogen generation system through full water splitting provide more flexibility for large‐scale applications of Ru–MnFeP/NF catalysts.     

Carbon Nanodot Surface Modifications Initiate Highly Efficient,Stable Catalysts for Both Oxygen Evolution and Reduction Reactions

Efficient, stable, and low‐cost electrocatalysts for the oxygen evolution and reduction reactions (OER and ORR) are essential components of energy conversion. Although much progress has been achieved in the development of platinum‐based electrocatalysts for ORR and iridium‐based electrocatalysts for OER, they are still not yet viable for large‐scale commercialization because of the high cost and scanty supply of the noble metals. Here, it is demonstrated that carbon nanodots surface‐modified with either phosphorus or amidogen can respectively achieve electrocatalytic activity approaching that of the benchmark Pt/C and IrO₂ /C catalysts for ORR and OER. Furthermore, phosphorus (amidogen)‐modified carbon nanodots with attached Au nanoparticles exhibit superior ORR (OER) activity better than commercial Pt/C (IrO₂/C) catalysts as well as excellent electrochemical stability under visible light.     

Highly Efficient Oxygen Reduction Reaction Activity of Graphitic Tube Encapsulating Nitrided CoxFey Alloy

Nonprecious metals are promising catalysts to avoid the sluggish oxygen reduction reaction (ORR) in next‐generation regenerative fuel cells or metal–air batteries. Therefore, development of nonprecious metal catalysts for ORR is highly desirable. Herein, precise tuning of the atomic ratio of Fe and Co encapsulated in melamine‐derived nitrogen‐rich graphitic tube (NGT) is reported. The Co_1.08Fe_3.34 hybrid with metal? nitrogen bonds ( 1 : Co_1.08Fe_3.34@NGT) shows remarkable ORR catalytic activities (80 mV higher in onset potential and 50 mV higher in half‐wave potential than those of state‐of‐the‐art commercial Pt/C catalysts), high current density, and stability. In acidic solution, 1 also shows compatible performance to commercial Pt/C in terms of ORR activity, current density, stability, and methanol tolerance. The high ORR activity is ascribed to the co‐existence of Fe? N, Co? N, and sufficient metallic FeCo alloys which favor faster electron movement and better adsorption of oxygen molecules on the catalyst surface. In the alkaline anion exchange membrane fuel cell setup, this cell delivers the power density of 117 mW cm^?2, demonstrating its potential use for energy conversion and storage applications.     

Atomically Dispersed Mo Supported on Metallic Co9S8 Nanoflakes as an Advanced Noble‐Metal‐Free Bifunctional Water Splitting Catalyst Working in Universal pH Conditions

Water splitting requires development of cost‐effective multifunctional materials that can catalyze both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) efficiently. Currently, the OER relies on the noble‐metal catalysts; since with other catalysts, its operation environment is greatly limited in alkaline conditions. Herein, an advanced water oxidation catalyst based on metallic Co₉S₈ decorated with single‐atomic Mo (0.99 wt%) is synthesized (Mo‐Co₉S₈@C). It exhibits pronounced water oxidization activity in acid, alkali, and neutral media by showing positive onset potentials of 200, 90, and 290 mV, respectively, which manifests the best Co₉S₈‐based single‐atom Mo catalyst till now. Moreover, it also demonstrates excellent HER performance over a wide pH range. Consequently, the catalyst even outperforms noble metal Pt/IrO₂‐based catalysts for overall water splitting (only requiring 1.68 V in acid, and 1.56 V in alkaline). Impressively, it works under a current density of 10 mA cm^?2 with no obvious decay during a 24 h (0.5 m H₂SO₄) and 72 h (1.0 m KOH) durability experiment. Density functional theory (DFT) simulations reveal that the synergistic effects of atomically dispersed Mo with Co‐containing substrates can efficiently alter the binding energies of adsorbed intermediate species and decrease the overpotentials of the water splitting.     

High‐Performance Trifunctional Electrocatalysts Based on FeCo/Co2P Hybrid Nanoparticles for Zinc–Air Battery and Self‐Powered Overall Water Splitting

Currently, it is still a significant challenge to simultaneously boost various reactions by one electrocatalyst with high activity, excellent durability, as well as low cost. Herein, hybrid trifunctional electrocatalysts are explored via a facile one‐pot strategy toward an efficient oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The catalysts are rationally designed to be composed by FeCo nanoparticles encapsuled in graphitic carbon films, Co₂P nanoparticles, and N,P‐codoped carbon nanofiber networks. The FeCo nanoparticles and the synergistic effect from Co₂P and FeCo nanoparticles make the dominant contributions to the ORR, OER, and HER activities, respectively. Their bifunctional activity parameter (?E) for ORR and OER is low to 0.77 V, which is much smaller than those of most nonprecious metal catalysts ever reported, and comparable with state‐of‐the‐art Pt/C and RuO₂ (0.78 V). Accordingly, the as‐assembled Zn–air battery exhibits a high power density of 154 mW cm^?2 with a low charge–discharge voltage gap of 0.83 V (at 10 mA cm^?2) and excellent stability. The as‐constructed overall water‐splitting cell achieves a current density of 10 mA cm^?2 (at 1.68 V), which is comparable to the best reported trifunctional catalysts.