Freestanding Flexible Li2S Paper Electrode with High Mass and Capacity Loading for High‐Energy Li–S Batteries

Lithium–sulfur (Li–S) batteries are a very appealing power source with extremely high energy density. But the use of a metallic‐Li anode causes serious safety hazards, such as short‐circuiting and explosion of the cells. Replacing a sulfur cathode with a fully‐lithiated lithium sulfide (Li₂S) to pair with metallic‐Li‐free high‐capacity anodes paves a feasible way to address this issue. However, the practical utility of Li₂S cathodes faces the challenges of poor conductivity, sluggish activation process, and high sensitivity to moisture and oxygen that make electrode production more difficult than dealing with sulfur cathodes. Here, an efficient but low‐cost strategy for easy production of freestanding flexible Li₂S‐based paper electrodes with very high mass and capacity loading in terms of in situ carbonthermal reduction of Li₂SO₄ by electrospinning carbon is reported. This chemistry enables high loading but strong affinity of ultrafine Li₂S nanoparticles in a freestanding conductive carbon‐nanofiber network, meanwhile greatly reducing the manufacturing complexity and cost of Li₂S cathodes. Benefiting from enhanced structural stability and reaction kinetics, the areal specific capacities of such cathodes can be significantly boosted with less sacrificing of high‐rate and cycling capability. This unique Li₂S‐cathode design can be directly applied for constructing metallic‐Li‐free or flexible Li–S batteries with high‐energy density.     

A Li2S‐TiS2‐Electrolyte Composite for Stable Li2S‐Based Lithium–Sulfur Batteries

Li₂S is a fully lithiated sulfur‐based cathode with a high theoretical capacity of 1166 mAh g^?1 that can be coupled with lithium‐free anodes to develop high‐energy‐density lithium–sulfur batteries. Although various approaches have been pursued to obtain a high‐performance Li₂S cathode, there are still formidable challenges with it (e.g., low conductivity, high overpotential, and irreversible polysulfide diffusion) and associated fabrication processes (e.g., insufficient Li₂S, excess electrolyte, and low reversible capacity), which have prevented the realization of high electrochemical utilization and stability. Here, a new cathode design composed of a homogeneous Li₂S‐TiS₂‐electrolyte composite that is prepared by a simple two‐step dry/wet‐mixing process is demonstrated, allowing the liquid electrolyte to wet the powder mixture consisting of insulating Li₂S and conductive TiS₂. The close‐contact, three‐phase boundary of this system improves the Li₂S‐activation efficiency and provides fast redox‐reaction kinetics, enabling the Li₂S‐TiS₂‐electrolyte cathode to attain stable cyclability at C/7 to C/3 rates, superior long‐term cyclability over 500 cycles, and promising high‐rate performance up to 1C rate. More importantly, this improved performance results from a cell design attaining a high Li₂S loading of 6 mg cm^?2, a high Li₂S content of 75 wt%, and a low electrolyte/Li₂S ratio of 6.     

A High‐Volumetric‐Capacity Cathode Based on Interconnected Close‐Packed N‐Doped Porous Carbon Nanospheres for Long‐Life Lithium–Sulfur Batteries

This study reports a Li–S battery cathode of high volumetric capacity enabled by novel micro‐ and mesostructuring. The cathode is based on monodisperse highly porous carbon nanospheres derived from a facile template‐ and surfactant‐free method. At the mesoscale, the nanospheres structure into interconnected close‐packed clusters of a few microns in extent, thus facilitating the fabrication of dense crack‐free high areal sulfur loading (5 mg cm^?2) cathodes with high electrical conductivity and low cathode impedance. A combination of the nitrogen doping (5 wt%), high porosity (2.3 cm³ g^?1), and surface area (2900 m² g^?1) at the microscale enables high sulfur immobilization and utilization. The cathode delivers among the best reported volumetric capacity to date, above typical Li‐ion areal capacity at 0.2 C over 200 cycles and low capacity fading of 0.1% per cycle at 0.5 C over 500 cycles. The compact cathode structure also ensures a low electrolyte requirement (6 µL mg^?1), which aids a low overall cell weight, and further, among the best gravimetric capacities published to date as well.     

MoN Supported on Graphene as a Bifunctional Interlayer for Advanced Li‐S Batteries

Rational design of effective polysulfide barriers is highly important for high‐performance lithium‐sulfur (Li‐S) batteries. A variety of adsorbents have been applied as interlayers to alleviate the shuttle effect. Nevertheless, the unsuccessful oxidation of Li₂S on interlayers leads to loss of active materials and blocks Li ion transport. In this work, a MoN‐based interlayer sandwiched between the C‐S cathode and the separator is developed. Such an interlayer not only strongly binds lithium polysulfides via Mo‐S bonding but also efficiently accelerates the decomposition of Li₂S. The acceleration mechanism toward Li₂S decomposition is determined to be a combination of contributions of catalytic cleavage of Li‐S bond in Li₂S based on the proposed covalence‐activation mechanism and rapid migration of the produced Li ions. As a result, the C–S cathodes with the as‐developed interlayer manifest a negligible charging potential barrier and outstanding cycling stability with a very low capacity fading rate of 0.023% per cycle during 1500 cycles at 1 C. High areal capacity of 6.02 mAh cm^?2 is achieved for high sulfur loading of 7.0 mg cm^?2 after cycling at 0.1 C. The material and strategy demonstrated in this work can open the door toward developing shuttle suppression interlayers without impairing cathode performance.     

Tethered Molecular Sorbents: Enabling Metal‐Sulfur Battery Cathodes

A rechargeable battery that uses sulfur at the cathode and a metal (e.g., Li, Na, Mg, or Al) at the anode provides perhaps the most promising path to a solid‐state, rechargeable electrochemical storage device capable of high charge storage capacity. It is understood that solubilization in the electrolyte and loss of sulfur in the form of long‐chain lithium polysulfides (Li₂S_x, 2 < x < 8) has hindered development of the most studied of these devices, the rechargeable Li‐S battery. Beginning with density‐functional calculations of the structure and interactions of a generic lithium polysulfide species with nitrile containing molecules, it is shown that it is possible to design nitrile‐rich molecular sorbents that anchor to other components in a sulfur cathode and which exert high‐enough binding affinity to Li₂S_x to limit its loss to the electrolyte. It is found that sorbents based on amines and imidazolium chloride present barriers to dissolution of long‐chain Li₂S_x and that introduction of as little as 2 wt% of these molecules to a physical sulfur‐carbon blend leads to Li‐S battery cathodes that exhibit stable long‐term cycling behaviors at high and low charge/discharge rates.     

High Capacity All‐Solid‐State Lithium Batteries Enabled by Pyrite‐Sulfur Composites

As the theoretical limit of intercalation material‐based lithium‐ion batteries is approached, alternative chemistries based on conversion reactions are presently considered. The conversion of sulfur is particularly appealing as it is associated with a theoretical gravimetric energy density up to 2510 Wh kg^?1. In this paper, three different carbon‐iron disulfide‐sulfur (C‐FeS₂‐S) composites are proposed as alternative positive electrode materials for all‐solid‐state lithium‐sulfur batteries. These are synthesized through a facile, low‐cost, single‐step ball‐milling procedure. It is found that the crystalline structure (evaluated by X‐ray diffraction) and the morphology of the composites (evaluated by scanning electron microscopy) are greatly influenced by the FeS₂:S ratio. Li/LiI‐Li₃PS₄/C‐FeS₂‐S solid‐state cells are tested under galvanostatic conditions, while differential capacity plots are used to discuss the peculiar electrochemical features of these novel materials. These cells deliver capacities as high as 1200 mAh g_(FeS2+S)^?1 at the intermediate loading of 1 mg cm^?2 (1.2 mAh cm^?2), and up to 3.55 mAh cm^?2 for active material loadings as high as 5 mg cm^?2 at 20 °C. Such an excellent performance, rarely reported for (sulfur/metal sulfide)‐based, all solid‐state cells, makes these composites highly promising for real application where high positive electrode loadings are required.     

Incorporating Solvate and Solid Electrolytes for All‐Solid‐State Li2S Batteries with High Capacity and Long Cycle Life

The development of all‐solid‐state lithium–sulfur batteries is hindered by the poor interfacial properties at solid electrolyte (SE)/electrode interfaces. The interface is modified by employing the highly concentrated solvate electrolyte, (MeCN)₂?LiTFSI:TTE, as an interlayer material at the electrolyte/electrode interfaces. The incorporation of an interlayer significantly improves the cycling performance of solid‐state Li₂S batteries compared to the bare counterpart, exhibiting a specific capacity of 760 mAh g^?1 at cycle 100 (330 mAh g^?1 for the bare cell). Electrochemical impedance spectroscopy shows that the interfacial resistance of the interlayer‐modified cell gradually decreases as a function of cycle number, while the impedance of the bare cell remains almost constant. Cross‐section scanning electron microscopy (SEM)/ energy dispersive X‐ray spectroscopy (EDS) measurements on the interlayer‐modified cell confirm the permeation of solvate into the cathode and the SE with electrochemical cycling, which is related to the decrease in cell impedance. In order to mimic the full permeation of the solvate across the entire cell, the solvate is directly mixed with the SE to form a “solvSEM” electrolyte. The hybrid Li₂S cell using a solvSEM electrolyte exhibits superior cycling performance compared to the solid‐state cells, in terms of Li₂S loading, Li₂S utilization, and cycling stability. The improved performance is due to the favorable ionic contact at the battery interfaces.     

Hierarchically Porous,Ultrathick, “Breathable” Wood‐Derived Cathode for Lithium‐Oxygen Batteries

In this work, a hierarchically porous and ultrathick “breathable” wood‐based cathode for high‐performance Li‐O₂ batteries is developed. The 3D carbon matrix obtained from the carbonized and activated wood (denoted as CA‐wood) serves as a superconductive current collector and an ideal porous host for accommodating catalysts. The ruthenium (Ru) nanoparticles are uniformly anchored on the porous wall of the aligned microchannels (denoted as CA‐wood/Ru). The aligned open microchannels inside the carbon matrix contribute to unimpeded oxygen gas diffusion. Moreover, the hierarchical pores on the microchannel walls can be facilely impregnated by electrolyte, forming a continuous supply of electrolyte. As a result, numerous ideal triphase active sites are formed where electrolyte, oxygen, and catalyst accumulate on the porous walls of microchannels. Benefiting from the numerous well‐balanced triple‐phase active sites, the assembled Li‐O₂ battery with the CA‐wood/Ru cathode (thickness: ≈700 µm) shows a high specific area capacity of 8.58 mA h cm^?2 at 0.1 mA cm^?2. Moreover, the areal capacity can be further increased to 56.0 mA h cm^?2 by using an ultrathick CA‐wood/Ru cathode with a thickness of ≈3.4 mm. The facile ultrathick wood‐based cathodes can be applied to other cathodes to achieve a super high areal capacity without sacrificing the electrochemical performance.     

Microemulsion Assisted Assembly of 3D Porous S/Graphene@g‐C3N4 Hybrid Sponge as Free‐Standing Cathodes for High Energy Density Li–S Batteries

A 3D porous sulfur/graphene@g‐C₃N₄ (S/GCN) hybrid sponge, which can be directly applied as a free‐standing cathode for Li–S batteries, is realized via a microemulsion assisted assembly approach. In this strategy, the interior oil emulsion droplets serve as soft templates to form pores to accommodate sulfur and the hydrophilic GCN stacks around oil droplets to assemble into a crosslinked 3D network. Through this microemulsion encapsulation route, S/GCN cathodes with a sulfur loading as high as 82 wt% can be achieved. Furthermore, the enriched N‐sites in GCN macropores offer numerous adhesion sites for polysulfides, realizing a “physical‐chemical” dual‐confinement for polysulfides from diffusion. Moreover, the robust and highly porous 3D graphene frameworks render efficient electron/Li⁺ transport pathways for fast kinetics as well as good structure integrity. Consequently, in comparison to the conventional G‐sponge/Li₂S_n catholyte system, S/GCN delivers a higher specific capacity, superior high‐rate capability (612 mA h g^?1 at 10 C), and alleviated anode corrosion issues. Particularly, an energy density as high as 1493 W h kg^?1 (calculated on the total weight of the cathode) and an extremely low capacity fading rate of 0.017% per cycle over 800 cycles at 0.3 C are achieved.     

Galvanic Corrosion of Lithium‐Powder‐Based Electrodes

Lithium metal is considered to be the most promising anode for the next generation of batteries if the issues related to safety and low coulombic efficiency can be overcome. It is known that the initial morphology of the lithium metal anode has a great influence on the cycling characteristics of a lithium metal battery (LMB). Lithium‐powder‐based electrodes (Li_p‐electrodes) are reported to diminish the occurrence of high surface area lithium deposits. Usually, ultra‐thin lithium foils (<50 µm) and Li_p‐electrodes are prepared on a copper substrate, thus a metal–metal contact area is generated. The combination of these two metals in the presence of an electrolyte, however, can lead to galvanic corrosion. Herein, the corrosion behavior of Li_p‐electrodes is studied. The porosity of such electrodes leads to a high amount of accessible Cu surface in contact with electrolyte. As a consequence, Li_p‐electrodes aged for 1 week in the electrolyte show spontaneous lithium dissolution near the junction to copper and void formation on the lithium‐powder particles. This corrosion process affects the delivered capacity of Li_p‐electrodes and increases the overvoltage of the lithium electrodissolution process. The occurrence of corrosion at the Cu|Li_p interface raises concerns about the practicality of multi‐metallic component systems for LMBs.     

High‐Performance Lithium‐Sulfur Batteries with a Self‐Supported, 3D Li2S‐Doped Graphene Aerogel Cathodes

Lithium‐sulfur (Li‐S) batteries are being considered as the next‐generation high‐energy‐storage system due to their high theoretical energy density. However, the use of a lithium‐metal anode poses serious safety concerns due to lithium dendrite formation, which causes short‐circuiting, and possible explosions of the cell. One feasible way to address this issue is to pair a fully lithiated lithium sulfide (Li₂S) cathode with lithium metal‐free anodes. However, bulk Li₂S particles face the challenges of having a large activation barrier during the initial charge, low active‐material utilization, poor electrical conductivity, and fast capacity fade, preventing their practical utility. Here, the development of a self‐supported, high capacity, long‐life cathode material is presented for Li‐S batteries by coating Li₂S onto doped graphene aerogels via a simple liquid infiltration–evaporation coating method. The resultant cathodes are able to lower the initial charge voltage barrier and attain a high specific capacity, good rate capability, and excellent cycling stability. The improved performance can be attributed to the (i) cross‐linked, porous graphene network enabling fast electron/ion transfer, (ii) coated Li₂S on graphene with high utilization and a reduced energy barrier, and (iii) doped heteroatoms with a strong binding affinity toward Li₂S/lithium polysulfides with reduced polysulfide dissolution based on first‐principles calculations.     

Solvent‐Free Synthesis of Thin,Flexible, Nonflammable Garnet‐Based Composite Solid Electrolyte for All‐Solid‐State Lithium Batteries

Thin solid‐state electrolytes with nonflammability, high ionic conductivity, low interfacial resistance, and good processability are urgently required for next‐generation safe, high energy density lithium metal batteries. Here, a 3D Li_6.75La₃Zr_1.75Ta_0.25O₁₂ (LLZTO) self‐supporting framework interconnected by polytetrafluoroethylene (PTFE) binder is prepared through a simple grinding method without any solvent. Subsequently, a garnet‐based composite electrolyte is achieved through filling the flexible 3D LLZTO framework with a succinonitrile solid electrolyte. Due to the high content of garnet ceramic (80.4 wt%) and high heat‐resistance of the PTFE binder, such a composite electrolyte film with nonflammability and high processability exhibits a wide electrochemical window of 4.8 V versus Li/Li⁺ and high ionic transference number of 0.53. The continuous Li⁺ transfer channels between interconnected LLZTO particles and succinonitrile, and the soft electrolyte/electrode interface jointly contribute to a high ambient‐temperature ionic conductivity of 1.2 × 10^?4 S cm^?1 and excellent long‐term stability of the Li symmetric battery (stable at a current density of 0.1 mA cm^?2 for over 500 h). Furthermore, as‐prepared LiFePO₄|Li and LiNi_0.5Mn_0.3Co_0.2O₂|Li batteries based on the thin composite electrolyte exhibit high discharge specific capacities of 153 and 158 mAh g^?1 respectively, and desirable cyclic stabilities at room temperature.     

Understanding Performance Degradation in Cation‐Disordered Rock‐Salt Oxide Cathodes

The collective redox activities of transition‐metal (TM) cations and oxygen anions have been shown to increase charge storage capacity in both Li‐rich layered and cation‐disordered rock‐salt cathodes. Repeated cycling involving anionic redox is known to trigger TM migration and phase transformation in layered Li‐ and Mn‐rich (LMR) oxides, however, detailed mechanistic understanding on the recently discovered Li‐rich rock‐salt cathodes is largely missing. The present study systematically investigates the effect of oxygen redox on a Li_1.3Nb_0.3Mn_0.4O₂ cathode and demonstrates that performance deterioration is directly correlated to the extent of oxygen redox. It is shown that voltage fade and hysteresis begin only after initiating anionic redox at high voltages, which grows progressively with either deeper oxidation of oxygen at higher potential or extended cycling. In contrast to what is reported on layered LMR oxides, extensive TM reduction is observed but phase transition is not detected in the cycled oxide. A densification/degradation mechanism is proposed accordingly which elucidates how a unique combination of extensive chemical reduction of TM and reduced quality of the Li percolation network in cation‐disordered rock‐salts can lead to performance degradation in these newer cathodes with 3D Li migration pathways. Design strategies to achieve balanced capacity and stability are also discussed.     

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

For mass production of all‐solid‐state lithium‐ion batteries (ASLBs) employing highly Li⁺ conductive and mechanically sinterable sulfide solid electrolytes (SEs), the wet‐slurry process is imperative. Unfortunately, the poor chemical stability of sulfide SEs severely restrict available candidates for solvents and in turn polymeric binders. Moreover, the binders interrupt Li⁺‐ionic contacts at interfaces, resulting in the below par electrochemical performance. In this work, a new scalable slurry fabrication protocol for sheet‐type ASLB electrodes made of Li⁺‐conductive polymeric binders is reported. The use of intermediate‐polarity solvent (e.g., dibromomethane) for the slurry allows for accommodating Li₆PS₅Cl and solvate‐ionic‐liquid‐based polymeric binders (NBR‐Li(G3)TFSI, NBR: nitrile?butadiene rubber, G3: triethylene glycol dimethyl ether, LiTFSI: lithium bis(trifluoromethanesulfonyl)imide) together without suffering from undesirable side reactions or phase separation. The LiNi_0.6Co_0.2Mn_0.2O₂ and Li₄Ti₅O₁₂ electrodes employing NBR‐Li(G3)TFSI show high capacities of 174 and 160 mA h g^?1 at 30 °C, respectively, which are far superior to those using conventional NBR (144 and 76 mA h g^?1). Moreover, high areal capacity of 7.4 mA h cm^?2 is highlighted for the LiNi_0.7Co_0.15Mn_0.15O₂ electrodes with ultrahigh mass loading of 45 mg cm^?2. The facilitated Li⁺‐ionic contacts at interfaces paved by NBR‐Li(G3)TFSI are evidenced by the complementary analysis from electrochemical and ⁷Li nuclear magnetic resonance measurements.     

Co–B Nanoflakes as Multifunctional Bridges in ZnCo2O4 Micro‐/Nanospheres for Superior Lithium Storage with Boosted Kinetics and Stability

Transition metal oxides hold great promise as high‐energy anodes in next‐generation lithium‐ion batteries. However, owing to the inherent limitations of low electronic/ionic conductivities and dramatic volume change during charge/discharge, it is still challenging to fabricate practically viable compacted and thick TMO anodes with satisfactory electrochemical performance. Herein, with mesoporous cobalt–boride nanoflakes serving as multifunctional bridges in ZnCo₂O₄ micro‐/nanospheres, a compacted ZnCo₂O₄/Co–B hybrid structure is constructed. Co–B nanoflakes not only bridge ZnCo₂O₄ nanoparticles and function as anchors for ZnCo₂O₄ micro‐/nanospheres to suppress the severe volume fluctuation, they also work as effective electron conduction bridges to promote fast electron transportation. More importantly, they serve as Li⁺ transfer bridges to provide significantly boosted Li⁺ diffusivity, evidenced from both experimental kinetics analysis and density functional theory calculations. The mesopores within Co–B nanoflakes help overcome the large Li⁺ diffusion barriers across 2D interfaces. As a result, the ZnCo₂O₄/Co–B electrode delivers high gravimetric/volumetric/areal capacities of 995 mAh g^?1/1450 mAh cm^?3/5.10 mAh cm^?2, respectively, with robust rate capability and long‐term cyclability. The distinct interfacial design strategy provides a new direction for designing compacted conversion‐type anodes with superior lithium storage kinetics and stability for practical applications.     

High‐Performance All‐Solid‐State Lithium–Sulfur Batteries Enabled by Amorphous Sulfur‐Coated Reduced Graphene Oxide Cathodes

Safety and the polysulfide shuttle reaction are two major challenges for liquid electrolyte lithium–sulfur (Li–S) batteries. Although use of solid‐state electrolytes can overcome these two challenges, it also brings new challenges by increasing the interface resistance and stress/strain. In this work, the interface resistance and stress/strain of sulfur cathodes are significantly reduced by conformal coating ≈2 nm sulfur (S) onto reduced graphene oxide (rGO). An Li–S full cell consisting of an rGO@S‐Li₁₀GeP₂S₁₂‐acetylene black (AB) composite cathode is evaluated. At 60 °C, the all‐solid‐state Li–S cell demonstrates a similar electrochemical performance as in liquid organic electrolyte, with high rate capacities of 1525.6, 1384.5, 1336.3, 903.2, 502.6, and 204.7 mA h g^?1 at 0.05, 0.1, 0.5, 1.0, 2.0, and 5.0 C, respectively. It can maintain a high and reversible capacity of 830 mA h g^?1 at 1.0 C for 750 cycles. The uniform distribution of the rGO@S nanocomposite in the Li₁₀GeP₂S₁₂‐AB matrix generates uniform volume changes during lithiation/delithiation, significantly reducing the stress/strain, thus extending the cycle life. Minimization of the stress/strain of solid cells is the key for a long cycle life of all‐solid‐state Li–S batteries.     

In Situ TEM Study of Volume Expansion in Porous Carbon Nanofiber/Sulfur Cathodes with Exceptional High‐Rate Performance

Although lithium sulfur batteries (LSBs) have attracted much interest owing to their high energy densities, synthesis of high‐rate cathodes and understanding their volume expansion behavior still remain challenging. Herein, electrospinning is used to prepare porous carbon nanofiber (PCNF) hosts, where both the pore volume and surface area are tailored by optimizing the sacrificial agent content and the activation temperature. Benefiting from the ameliorating functional features of high electrical conductivity, large pore volume, and Li ion permselective micropores, the PCNF/A550/S electrode activated at 550 °C exhibits a high sulfur loading of 71 wt%, a high capacity of 945 mA h g^?1 at 1 C, and excellent high‐rate capability. The in situ transmission electron microscope examination reveals that the lithiation product, Li₂S, is contained within the electrode with only ≈35% volume expansion and the carbon host remains intact without fracture. In contrast, the PCNF/A750/S electrode with damaged carbon spheres exhibits sulfur sublimation, a larger volume expansion of over 61%, and overflowing of Li₂S, a testament to its poor cyclic stability. These findings provide, for the first time, a new insight into the correlation between volume expansion and electrochemical performance of the electrode, offering a potential design strategy to synthesize high‐rate and stable LSB cathodes.     

Conductive and Catalytic Triple‐Phase Interfaces Enabling Uniform Nucleation in High‐Rate Lithium–Sulfur Batteries

Rechargeable lithium–sulfur batteries have attracted tremendous scientific attention owing to their superior energy density. However, the sulfur electrochemistry involves multielectron redox reactions and complicated phase transformations, while the final morphology of solid‐phase Li₂S precipitates largely dominate the battery's performance. Herein, a triple‐phase interface among electrolyte/CoSe₂/G is proposed to afford strong chemisorption, high electrical conductivity, and superb electrocatalysis of polysulfide redox reactions in a working lithium–sulfur battery. The triple‐phase interface effectively enhances the kinetic behaviors of soluble lithium polysulfides and regulates the uniform nucleation and controllable growth of solid Li₂S precipitates at large current density. Therefore, the cell with the CoSe₂/G functional separator delivers an ultrahigh rate cycle at 6.0 C with an initial capacity of 916 mAh g^?1 and a capacity retention of 459 mAh g^?1 after 500 cycles, and a stable operation of high sulfur loading electrode (2.69–4.35 mg cm^?2). This work opens up a new insight into the energy chemistry at interfaces to rationally regulate the electrochemical redox reactions, and also inspires the exploration of related energy storage and conversion systems based on multielectron redox reactions.     

Carbon Quantum Dots–Modified Interfacial Interactions and Ion Conductivity for Enhanced High Current Density Performance in Lithium–Sulfur Batteries

Significant progress has achieved for developing lithium–sulfur (Li–S) batteries with high specific capacities and excellent cyclic stability. However, some critical issues emerge when attempts are made to raise the areal sulfur loading and increase the operation current density to meet the standards for various industrial applications. In this work, polyethylenimine‐functionalized carbon dots (PEI‐CDots) are designed and prepared for enhancing performance of the Li–S batteries with high sulfur loadings and operation under high current density situations. Strong chemical binding effects towards polysulfides and fast ion transport property are achieved in the PEI‐CDots‐modified cathodes. At a high current density of 8 mA cm^?2, the PEI‐CDots‐modified Li–S battery delivers a reversible areal capacity of 3.3 mAh cm^?2 with only 0.07% capacity decay per cycle over 400 cycles at 6.6 mg sulfur loading. Detailed analysis, involving electrochemical impedance spectroscopy, cyclic voltammetry, and density functional theory calculations, is done for the elucidation of the underlying enhancement mechanism by the PEI‐CDots. The strongly localized sulfur species and the promoted Li⁺ ion conductivity at the cathode–electrolyte interface are revealed to enable high‐performance Li–S batteries with high sulfur loading and large operational current.     

Exploiting Lithium‐Depleted Cathode Materials for Solid‐State Li Metal Batteries

Solid‐state lithium metal batteries (SSLMBs) may become one of the high‐energy density storage devices for the next generation of electric vehicles. High safety and energy density can be achieved by utilizing solid electrolytes and Li metal anodes. Therefore, developing cathode materials which can match with Li metal anode efficiently is indispensable. In SSLMBs, Li metal anodes can afford the majority of active lithium ions, then lithium‐depleted cathode materials can be a competitive candidate to achieve high gravimetric energy density as well as save lithium resources. Li_0.33MnO₂ lithium‐depleted material is chosen, which also has the advantages of low synthesis temperature and low cost (cobalt‐free). Notably, solid‐state electrolyte can greatly alleviate the problem of manganese dissolution in the electrolyte, which is beneficial to improve the cycling stability of the battery. Thus, SSLMBs enable practical applications of lithium‐depleted cathode materials.