A Safe Organic Oxygen Battery Built with Li‐Based Liquid Anode and MOFs Separator

Safe rechargeable batteries of improved energy density and high power performance are urgently needed for the development of large electric devices. Herein, an Li‐based organic liquid anode is proposed, and an organic oxygen battery with a metal organic framework membrane separator is realized, which is able to conduct Li ions and separate other large species in the system. Equipped with the dual redox mediator strategy, the organic oxygen battery exhibits superior rate performance with long cycling life and low overpotential. A “solid electrolyte interface”‐like layer is observed between the organic liquid anode and the ion conducting separator. This work not only introduces a new type of anode for Li‐based batteries, but also provides fundamental insights for the better application of biphenyl‐based liquid anodes.     

Ethers Illume Sodium‐Based Battery Chemistry: Uniqueness,Surprise, and Challenges

Sodium‐ion batteries (SIBs) have the potential to be practically applied in large‐scale energy storage markets. The rapid progress of SIBs research is primarily focused on electrodes, while electrolytes attract less attention. Indeed, the improvement of electrode performance is arguably correlated with the electrolyte optimization. In conventional lithium‐ion batteries (LIBs), ether‐based electrolytes are historically less practical owing to the insufficient passivation of both anodes and cathodes. As an important class of aprotic electrolytes, ethers have revived with the emerging lithium‐sulfur and lithium‐oxygen batteries in recent years, and are even booming in the wave of SIBs. Ether‐based electrolytes are unique to enabling these new battery chemistries in terms of producing stable ternary graphite intercalation compounds, modifying anode solid electrolyte interphases, reducing the solubility of intermediates, and decreasing polarization. Better still, ether‐based electrolytes are compatible with specific inorganic cathodes and could catalyze the assembly of full SIBs prototypes. This Research News article aims to summarize the recent critical reports on ether‐based electrolytes in sodium‐based batteries, to unveil the uniqueness of ether‐based electrolytes to advancing diverse electrode materials, and to shed light on the viability and challenges of ether‐based electrolytes in future sodium‐based battery chemistries.     

Carbon Anodes for Nonaqueous Alkali Metal‐Ion Batteries and Their Thermal Safety Aspects

Since their commercialization by Sony in 1991, graphite anodes in combination with various cathodes have enabled the widespread success of lithium‐ion batteries (LIBs), providing over 10 billion rechargeable batteries to the global population. Next‐generation nonaqueous alkali metal‐ion batteries, namely sodium‐ion batteries (SIBs) and potassium‐ion batteries (PIBs), are projected to utilize intercalation‐based carbon anodes as well, due to their favorable electrochemical properties. While traditionally graphite anodes have dominated the market share of LIBs, other carbon materials have been investigated, including graphene, carbon nanotubes, and disordered carbons. The relationship between carbon material properties, electrochemical performance, and charge storage mechanisms is clarified for these alkali metal‐ion batteries, elucidating possible strategies for obtaining enhanced cycling stability, specific capacity, rate capability, and safety aspects. As a key component in determining cell performance, the solid electrolyte interphase layer is described in detail, particularly for its dependence on the carbon anode. Finally, battery safety at extreme temperatures is discussed, where carbon anodes are susceptible to dendrite formation, accelerated aging, and eventual thermal runaway. As society pushes toward higher energy density LIBs, this review aims to provide guidance toward the development of sustainable next‐generation SIBs and PIBs.     

Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery

Safety, nontoxicity, and durability directly determine the applicability of the essential characteristics of the lithium (Li)‐ion battery. Particularly, for the lithium–sulfur battery, due to the low ignition temperature of sulfur, metal lithium as the anode material, and the use of flammable organic electrolytes, addressing security problems is of increased difficulty. In the past few years, two basic electrolyte systems are studied extensively to solve the notorious safety issues. One system is the conventional organic liquid electrolyte, and the other is the inorganic solid‐state or quasi‐solid‐state composite electrolyte. Here, the recent development of engineered liquid electrolytes and design considerations for solid electrolytes in tackling these safety issues are reviewed to ensure the safety of electrolyte systems between sulfur cathode materials and the lithium‐metal anode. Specifically, strategies for designing and modifying liquid electrolytes including introducing gas evolution, flame, aqueous, and dendrite‐free electrolytes are proposed. Moreover, the considerations involving a high‐performance Li⁺ conductor, air‐stable Li⁺ conductors, and stable interface performance between the sulfur cathode and the lithium anode for developing all‐solid‐state electrolytes are discussed. In the end, an outlook for future directions to offer reliable electrolyte systems is presented for the development of commercially viable lithium–sulfur batteries.     

Exploiting Lithium‐Depleted Cathode Materials for Solid‐State Li Metal Batteries

Solid‐state lithium metal batteries (SSLMBs) may become one of the high‐energy density storage devices for the next generation of electric vehicles. High safety and energy density can be achieved by utilizing solid electrolytes and Li metal anodes. Therefore, developing cathode materials which can match with Li metal anode efficiently is indispensable. In SSLMBs, Li metal anodes can afford the majority of active lithium ions, then lithium‐depleted cathode materials can be a competitive candidate to achieve high gravimetric energy density as well as save lithium resources. Li_0.33MnO₂ lithium‐depleted material is chosen, which also has the advantages of low synthesis temperature and low cost (cobalt‐free). Notably, solid‐state electrolyte can greatly alleviate the problem of manganese dissolution in the electrolyte, which is beneficial to improve the cycling stability of the battery. Thus, SSLMBs enable practical applications of lithium‐depleted cathode materials.     

Challenges in Developing Electrodes,Electrolytes, and Diagnostics Tools to Understand and Advance Sodium‐Ion Batteries

Considering the natural abundance and low cost of sodium resources, sodium‐ion batteries (SIBs) have received much attention for large‐scale electrochemical energy storage. However, smart structure design strategies and good mechanistic understanding are required to enable advanced SIBs with high energy density. In recent years, the exploration of advanced cathode, anode, and electrolyte materials, as well as advanced diagnostics have been extensively carried out. This review mainly focuses on the challenging problems for the attractive battery materials (i.e., cathode, anode, and electrolytes) and summarizes the latest strategies to improve their electrochemical performance as well as presenting recent progress in operando diagnostics to disclose the physics behind the electrochemical performance and to provide guidance and approaches to design and synthesize advanced battery materials. Outlook and perspectives on the future research to build better SIBs are also provided.     

An Upgraded Lithium Ion Battery Based on a Polymeric Separator Incorporated with Anode Active Materials

Structural/compositional characteristics at the anode/electrolyte interface are of paramount importance for the practical performance of lithium ion batteries, including cyclic stability, rate capacity, and operational safety. The anode‐electrolyte interface with traditional separator technology is featured with inevitable phase discontinuity and fails to support the stable operation of lithium ion batteries based on large‐capacity anodes with structural change in charges/discharges, such as transition metal oxide anodes. In this work, an anode/electrolyte framework based on an oxide anode and an active‐oxide‐incorporated separator is proposed for the first time and investigated for lithium ion batteries. The architecture builds a robust anode‐separator interface in LIBs, shortens Li⁺ diffusion path, accelerates electron transport, and mitigates the volume change of the oxide anode in electrochemical reactions. Remarkably, 4 wt% CuO addition in the separator leads to a 17% enhancement in the overall capacity of a battery with a CuO anode. The battery delivers an unparalleled record reversible capacity of 637.2 mAh g^?1 with a 99% capacity retention after 100 charge/discharge cycles at 0.5 C. The high performance are attributed to the robust anode‐separator interface, which gives rise to enhanced interaction between the oxide anode and the same‐oxide‐incorporated composite in the separator.     

Mixed Metal Difluorides as High Capacity Conversion‐Type Cathodes: Impact of Composition on Stability and Performance

With the most recent development of ultrahigh capacity anodes, such as Li‐ or Si‐based anodes, metal fluorides hold promise as complementary high‐capacity conversion cathode materials for next‐generation energy storage devices. Despite their higher theoretical energy density compared to cells with sulfur cathodes, these materials have received dramatically less attention and little is understood about the origins of their electrochemical behavior. Here, the successful methodology to produce highly uniform size‐controlled mixed metal difluoride nanocomposites is reported. It is discovered that such materials undergo reduction in a single step with a reduction potential intermediate to those for the corresponding single‐metal difluorides and that a solid solution is reformed upon charging, which is advantageous for practical applications. For the first time the progressive formation of metal trifluorides upon repeated cycling of difluorides is reported. Systematic electrochemical measurements in combination with postmortem analyses lead to the conclusion that the cathode stability strongly depends on the ability to prevent formation and growth of a resistive cathode solid electrolyte interphase, which, in turn, strongly depends on the metal composition. This methodology and new findings will help to elucidate a path to developing metal fluoride–based commercial Li‐ion batteries and provide guidelines for material selection.     

High‐Performance Li–Se Battery Enabled via a One‐Piece Cathode Design

A high‐performance Li–Se battery is demonstrated by adopting a novel Se cathode design. The Se cathode is a one‐piece body combined with a Se deposited current collector and a solid polymer electrolyte (SPE). In the preparation of the Se cathode, Se is electrodeposited on Ni‐foam, and the pores are filled with SPE layers. Through this electrodeposition, the cathode is easily fabricated, and charge transports are facile. The use of the SPE layer offers a durable Se electrode, enhancing ion pathways, securing safety, and suppressing undesirable electrochemical reactions. Li–Se batteries assembled with the one‐piece Se cathode and Li‐metal anode, without using conductive carbon, polymer binder, and separator, exhibit ultrastable performance with a low capacity decay of 0.001% per cycle at 1 C over 3000 cycles. The rational design of a one‐piece electrode may hold great promise for the future development of energy storage devices with facile fabrication process and long‐term stability.     

Formation of Solid–Electrolyte Interfaces in Aqueous Electrolytes by Altering Cation‐Solvation Shell Structure

Aqueous lithium/sodium‐ion batteries (AIBs) have received increasing attention because of their intrinsic safety. However, the narrow electrochemical stability window (1.23 V) of the aqueous electrolyte significantly hinders the development of AIBs, especially the choice of electrode materials. Here, an aqueous electrolyte composed of LiClO₄, urea, and H₂O, which allows the electrochemical stability window to be expanded to 3.0 V, is developed. Novel [Li (H₂O)_x(organic)_y]⁺ primary solvation sheath structures are developed in this aqueous electrolyte, which contribute to the formation of solid–electrolyte interface layers on the surfaces of both the cathode and anode. The expanded electrochemical stability window enables the construction of full aqueous Li‐ion batteries with LiMn₂O₄ cathodes and Mo₆S₈ anodes, demonstrating an operating voltage of 2.1 V and stability over 2000 cycles. Furthermore, a symmetric aqueous Na‐ion battery using Na₃V₂(PO₄)₃ as both the cathode and anode exhibits operating voltage of 1.7 V and stability over 1000 cycles at a rate of 5 C.     

A Review on the Features and Progress of Dual‐Ion Batteries

Despite the wide application of lithium‐ion batteries in portable electronic devices and electric vehicles, the demand for new battery systems with the merits of high voltage, environmental friendliness, safety, and cost efficiency is still quite urgent. This perspective focuses on dual‐ion batteries (DIBs), in which, both the cations and anions are involved in the battery reaction. An anion's intercalation/deintercalation process on the cathode side allows the DIBs to operate at high voltages, which is favorable for enhanced energy density. However, electrolytes with a wide electrochemical window and suitable anion‐intercalation materials with highly reversible capacities should be developed. The progress of research into stable organic electrolytes, ionic liquids, and their effects on the electrochemical performances of DIBs are first discussed. Thereafter, the anion‐host materials including graphitic materials, organic materials, and their working mechanisms are discussed in detail. In addition, recently emerging DIB systems with high‐capacity anodes, or sodium‐, potassium‐ion involved battery reactions are also reviewed. The authors' recent work, demonstrating a generalized DIB construction using metal foil as both current collector and alloying anode material, which is successfully extended into lithium‐, sodium‐, and potassium‐based DIBs, is also discussed.     

Hard Carbon Anodes and Novel Electrolytes for Long‐Cycle‐Life Room Temperature Sodium‐Sulfur Full Cell Batteries

A novel combination of hard carbon anode sodium pre‐loading and a tailored electrolyte is used to prepare room temperature sodium‐sulfur full cell batteries. The electrochemical loading with sodium ions is realized in a specific mixture of diethyl carbonate, ethylene carbonate, and fluoroethylene carbonate electrolyte in order to create a first solid electrolyte interface (SEI) on the anode surface. Combining such anodes with a porous carbon/sulfur composite cathode results in full cells with a significantly decreased polysulfide shuttle when compared to half cells combined with metallic sodium anodes. Further optimization involves the use of Na₂S/P₂S₅ doped tetraethylene glycol dimethyl ether based electrolyte in the full cell for the formation of a second SEI, reducing polysulfide shuttle even further. More importantly, the electrochemical discharge processes in the cell are improved by adding this dissolved complexation agent to the electrolyte. As a result of this combination sodium‐sulfur cells with tailored cathode materials and electrolytes can achieve high discharge capacities up to 980 mAh g^?1_sulfur and 1000 cycles with 200 mAh g^?1_sulfur remaining capacity, at room temperature.     

Strategies Toward Stable Nonaqueous Alkali Metal–O2 Batteries

Alkali metal–O₂ batteries, by coupling high‐capacity alkali metal anodes with gaseous oxygen, possess extremely high gravimetric energy density that is comparable to gasoline and are potential energy storage technologies beyond lithium–ion batteries. The development of alkali metal–O₂ batteries has achieved great progress in recent years, from materials to prototype devices and on fundamental mechanisms. The stability of alkali metal–O₂ batteries is still poor, however, leading to a huge gap between laboratory research and commercial applications. A series of parasitic reactions result in the instability, which occur during electrochemical discharging and charging. The ubiquitous active oxygen species attack both the organic electrolyte and the carbon cathode, triggering various parasitic reactions. Meanwhile, dendrite growth and volume expansion upon repeated plating/stripping and O₂ crossover severely limit the reversibility of alkali metal anodes. Here, an overview of the strategies against these issues is given to improve the stability of nonaqueous alkali metal–O₂ batteries, which is discussed from three aspects: air cathodes, alkali metal anodes, and aprotic electrolytes. Furthermore, perspectives for future research of stable alkali metal–O₂ batteries are outlined.     

Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries

Secondary batteries based on metal anodes (e.g., Li, Na, Mg, Zn, and Al) are among the most sought‐after candidates for next‐generation mobile and stationary storage systems because they are able to store a larger amount of energy per unit mass or volume. However, unstable electrodeposition and uncontrolled interfacial reactions occuring in liquid electrolytes cause unsatisfying cell performance and potential safety concerns for the commercial application of these metal anodes. Solid‐state electrolytes (SSEs) having a higher modulus are considered capable of inhibiting difficulties associated with the anodes and may enable building of safe all‐solid‐state metal batteries, yet several challenges, such as insufficient room‐temperature ionic conductivity and poor interfacial stability between the electrode and the electrolyte, hinder the large‐scale development of such batteries. Here, research and development of SSEs including inorganic ceramics, organic solid polymers, and organic–inorganic hybrid/composite materials for metal‐based batteries are reviewed. The comparison of different types of electrolytes is discussed in detail, in the context of electrochemical energy storage applications. Then, the focus of this study is on recent advances in a range of attractive and innovative battery chemistries and technologies that are enabled by SSEs. Finally, the challenges and future perspectives are outlined to foresee the development of SSEs.     

Hybrid and Aqueous Lithium‐Air Batteries

Lithium‐air (Li‐air) batteries have become attractive because of their extremely high theoretical energy density. However, conventional Li‐air cells operating with non‐aqueous electrolytes suffer from poor cycle life and low practical energy density due to the clogging of the porous air cathode by insoluble discharge products, contamination of the organic electrolyte and lithium metal anode by moist air, and decomposition of the electrolyte during cycling. These difficulties may be overcome by adopting a cell configuration that consists of a lithium‐metal anode protected from air by a Li⁺‐ion solid electrolyte and an air electrode in an aqueous catholyte. In this type of configuration, a Li⁺‐ion conducting “buffer” layer between the lithium‐metal anode and the solid electrolyte is often necessary due to the instability of many solid electrolytes in contact with lithium metal. Based on the type of buffer layer, two different battery configurations are possible: “hybrid” Li‐air batteries and “aqueous” Li‐air batteries. The hybrid and aqueous Li‐air batteries utilize the same battery chemistry and face similar challenges that limit the cell performance. Here, an overview of recent developments in hybrid and aqueous Li‐air batteries is provided and the factors that influence their performance and impede their practical applications, followed by future directions are discussed.     

High‐Rate and Long Cycle‐Life Alloy‐Type Magnesium‐Ion Battery Anode Enabled Through (De)magnesiation‐Induced Near‐Room‐Temperature Solid–Liquid Phase Transformation

Resources used in lithium‐ion batteries are becoming more expensive due to their high demand, and the global cobalt market heavily depends on supplies from countries with high geopolitical risks. Alternative battery technologies including magnesium‐ion batteries are therefore desirable. Progress toward practical magnesium‐ion batteries are impeded by an absence of suitable anodes that can operate with conventional electrolyte solvents. Although alloy‐type magnesium‐ion battery anodes are compatible with common electrolyte solvents, they suffer from severe failure associated with huge volume changes during cycling. Consequently, achieving more than 200 cycles in alloy‐type magnesium‐ion battery anodes remains a challenge. Here an unprecedented long‐cycle life of 1000 cycles, achieved at a relatively high (dis)charge rate of 3 C (current density: 922.5 mA g^?1) in Mg₂Ga₅ alloy‐type anode, taking advantage of near‐room‐temperatures solid–liquid phase transformation between Mg₂Ga₅ (solid) and Ga (liquid), is demonstrated. This concept should open the way to the development of practical anodes for next‐generation magnesium‐ion batteries.     

Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes

In recent years, the Li metal anode has regained a position of paramount research interest because of the necessity for employing Li metal in next‐generation battery technologies such as Li‐S and Li‐O₂. Severely limiting this utilization, however, are the rapid capacity degradation and safety issues associated with rechargeable Li metal anodes. A fundamental understanding of the failure mechanism of Li metal at high charge rates has remained elusive due to the complicated interfacial chemistry that occurs between Li metal and liquid electrolytes. Here, it is demonstrated that at high current density the quick formation of a highly resistive solid electrolyte interphase (SEI) entangled with Li metal, which grows towards the bulk Li, dramatically increases up the cell impedance and this is the actual origin of the onset of cell degradation and failure. This is instead of dendritic or mossy Li growing outwards from the metal surface towards/through the separator and/or the consumption of the Li and electrolyte through side reactions. Interphase, in this context, refers to a substantive layer rather than a thin interfacial layer. Discerning the mechanisms and consequences for this interphase formation is crucial for resolving the stability and safety issues associated with Li metal anodes.     

“Water‐in‐Salt” Electrolyte Makes Aqueous Sodium‐Ion Battery Safe,Green, and Long‐Lasting

Narrow electrochemical stability window (1.23 V) of aqueous electrolytes is always considered the key obstacle preventing aqueous sodium‐ion chemistry of practical energy density and cycle life. The sodium‐ion water‐in‐salt electrolyte (NaWiSE) eliminates this barrier by offering a 2.5 V window through suppressing hydrogen evolution on anode with the formation of a Na⁺‐conducting solid‐electrolyte interphase (SEI) and reducing the overall electrochemical activity of water on cathode. A full aqueous Na‐ion battery constructed on Na_0.66[Mn_0.66Ti_0.34]O₂ as cathode and NaTi₂(PO₄)₃ as anode exhibits superior performance at both low and high rates, as exemplified by extraordinarily high Coulombic efficiency (>99.2%) at a low rate (0.2 C) for >350 cycles, and excellent cycling stability with negligible capacity losses (0.006% per cycle) at a high rate (1 C) for >1200 cycles. Molecular modeling reveals some key differences between Li‐ion and Na‐ion WiSE, and identifies a more pronounced ion aggregation with frequent contacts between the sodium cation and fluorine of anion in the latter as one main factor responsible for the formation of a dense SEI at lower salt concentration than its Li cousin.     

High‐Performance Aqueous Rechargeable Li‐Ni Battery Based on Ni(OH)2/NiOOH Redox Couple with High Voltage

New energy storage and conversion systems require large‐scale, cost‐effective, good safety, high reliability, and high energy density. This study demonstrates a low‐cost and safe aqueous rechargeable lithium‐nickel (Li‐Ni) battery with solid state Ni(OH)₂/NiOOH redox couple as cathode and hybrid electrolytes separated by a Li‐ion‐conductive solid electrolyte layer. The proposed aqueous rechargeable Li‐Ni battery exhibits an approximately open‐circuit potential of 3.5 V, outperforming the theoretic stable window of water 1.23 V, and its energy density can be 912.6 W h kg^‐1, which is much higher than that of state‐of‐the‐art lithium ion batteries. The use of a solid‐state redox couple as cathode with a metallic lithium anode provides another postlithium chemistry for practical energy storage and conversion.     

Building Lithiophilic Ion‐Conduction Highways on Garnet‐Type Solid‐State Li+ Conductors

The integration of highly conductive solid‐state electrolytes (SSEs) into solid‐state cells is still a challenge mainly due to the high impedance existing at the electrolyte/electrode interface. Although solid‐state garnet‐based batteries have been successfully assembled with the assistance of an intermediate layer between the garnet and the Li metal anode, the slow discharging/charging rates of the batteries inhibits practical applications, which require much higher power densities. Here, a crystalline sulfonated‐covalent organic framework (COF) thin layer is grown on the garnet surface via a simple solution process. It not only significantly improves the lithiophilicity of garnet electrolytes via the lithiation of the COF layer with molten Li, but also creates effective Li⁺ diffusion “highways” between the garnet and the Li metal anode. As a result, the interfacial impedance of symmetric solid‐state Li cells is significantly decreased and the cells can be operated at high current densities up to 3 mA cm^?2, which is difficult to achieve with current interfacial modification technologies for SSEs. The solid‐state Li‐ion batteries using LiFePO₄ cathodes, Li anodes, and COF‐modified garnet electrolytes thus exhibit a significantly improved rate capability.